My Cisco Training Courses @ MFT.Info in this chapter I focused on Routing protocols in CCNA Technologies , consider that this info has been presented @ Workshop Teaching , So if you wanna know more about this scenarios feedback me to give you LAB Scenarios, good luck.
Citation preview
1. Connection Methods Back to Back is a Design Digital Content
& Contents mall developed by Guild Design Inc. Connection
Methods Different Geography is a Design Digital Content &
Contents mall developed by Guild Design Inc. Tehran Institute of
Technology Course name: Cisco CCNA Instructor: Mansour.nch Senior @
Tehran Institute of Technology Copyright 2014
2. Back to Back Method Configurations: one Router act as DTE
and another one act as a DCE. first of all use Router#show
Running-Config to see what the serial port full name? if serial
port doesnt exist you must add it physically. if exist follow these
steps: Router(config)#interface serial0/0/0 Router(config-if)#clock
rate 64000 Router(config-if)#BandWidth 64 (Mbps ; too important in
routing protocols) Tehran Institute of Technology Course name:
Cisco CCNA Instructor: Mansour.nch Senior @ Tehran Institute of
Technology Copyright 2014
3. In a different Geography This is Done by CSU/DSU Modem ,
when we are using communication infrastructure in a country this
device configure parameters automatically for the best
connectivity, so CSU/DSU modem is the best solution for this
scenario. Tehran Institute of Technology Course name: Cisco CCNA
Instructor: Mansour.nch Senior @ Tehran Institute of Technology
Copyright 2014
4. LOGO Routing Fundamentals Routing Algorithms Course name:
Cisco CCNA Instructor: Mansour.nch Senior @ Tehran Institute of
Technology Copyright 2014
5. An introduction to Routing Connected scenario In this
scenario router connected to the destination directly via own
interfaces. Routing Theory Learned scenario in this scenario router
didnt connected directly to the destination but can learn
destination via other routers nearby. Tehran Institute of
Technology Course name: Cisco CCNA Instructor: Mansour.nch Senior @
Tehran Institute of Technology Copyright 2014
6. Learned VS Connected Tehran Institute of Technology Course
name: Cisco CCNA Instructor: Mansour.nch Senior @ Tehran Institute
of Technology Copyright 2014
7. An introduction to Routing Static Routing As an
administrator of network you know all details about the
infrastructure of network. You Teach to the router how to route!
Routing Methods Dynamic Routing In this scenario Learning Process
is are Automatically Done bye Router Router Learn Routes from
neighbors Tehran Institute of Technology Course name: Cisco CCNA
Instructor: Mansour.nch Senior @ Tehran Institute of Technology
Copyright 2014
8. Static Routing Example Tehran Institute of Technology Stub
network is a Local Network Network address of stub network is
different from destination , so simple ping command will fail
intentionally. Stub network packets has only one way (just one
gateway) to access Internet Left network has internet access Router
A act as a Gateway to respond requests from Stub Network Network
address of this network is different from B network , So ping
command will fail intentionally via one host on network A. Course
name: Cisco CCNA Instructor: Mansour.nch Senior @ Tehran Institute
of Technology Copyright 2014
9. Static Routing Example Tehran Institute of Technology The
host want to access to www.google.com The respond for host request
is not here! , not found on this network !! So the request must get
out here to find answer The solution is redirect all traffic from
stub network to outside Via Router B , Interface: 172.16.2.1 Course
name: Cisco CCNA Instructor: Mansour.nch Senior @ Tehran Institute
of Technology Copyright 2014
10. Static Routing Example Tehran Institute of Technology
Geography Connection between Routers Via Serial Interface , so
redirected traffic will flow @ this line and will accepted by
Router A via interface: 172.16.2.2 Course name: Cisco CCNA
Instructor: Mansour.nch Senior @ Tehran Institute of Technology
Copyright 2014
11. Static Routing Example Tehran Institute of Technology So we
need to configure a static route right over here! to tell this
router, forward the packets to 172.16.2.1 if the packets
destination was Stub Network. Course name: Cisco CCNA Instructor:
Mansour.nch Senior @ Tehran Institute of Technology Copyright
2014
12. Static Routing Example Tehran Institute of Technology What
the Configuration on Router B? Default Route The answer to this
question require a new Topic Called. . . Course name: Cisco CCNA
Instructor: Mansour.nch Senior @ Tehran Institute of Technology
Copyright 2014
13. Default Route What the purpose of this tiny program? For
(i=0 ; i