“HACK MODE” ENABLED HARDWARE HACKING ON A BUDGET

BSIDES INDY 2017

PRICE MCDONALD

ABOUT:ME

O’RLY?

OK, SO HARDWARE

SECURITY SUCKS… BUT WHY FOCUS

ON THE HARDWARE?

METHODOLOGY

WHERE DO WE GET THE THINGS?

• Beta Programs• https://www.betabound.com/tp-link-router-

private-beta/• https://beta.linksys.com/• https://www.beta.netgear.com/signup/

• Flea Markets• Ebay• Craigslist• Garage Sales

DISASSEMBLY “VOIDING THE WARRANTY”

TAMPER RESISTANCE/DETECTION/ALERTINGThey mean different things, but may not matter either way.

COMPONENT IDENTIFICATION

What do you see?

COMPONENT IDENTIFICATION(2)

• EOL 802.11G router SoC (System on Chip)• 200 Mhz MIPS32 core• Supports Serial or Parallel Flash• One JTAG and two UART Ports• 336 ball FBGA (Fine-pitch Ball Grid Array)

• 32M-BIT Parallel NOR Flash Memory• 3V only• 48-pin TSOP (Thin Small Outline Package)

• CMOS DDR400 RAM• 66-pin TSOP II

COMPONENT IDENTIFICATION TIP AND TRICKS

The image part with relationship ID rId5 was not found in the file.

ARTS AND CRAFTS TIME

FINDING GROUND

• Using the MultiMeter we can figure out which of the pins on our headers connect to ground and which have voltage.

GroundVoltageSpecifically 3.3v

• Got Ground?

PHYSICAL COUNTER MEASURES

COMMON INTERFACE TYPES

• UART - Universal Asynchronous Receiver/Transmitter

• SPI – Serial Peripheral Interface

• I2C – Inter Integrated Circuit

• JTAG – Joint Test Action Group – Hardware Debugging Interface

• CAN – Controller Area Network (Cars/ATM/etc)

• RS232- Serial Interface used on many legacy devices

PINOUT REVERSING• SALEAE LOGIC ANALYZER

• ~100 BUCKS ON THE LOW END @ HTTPS://WWW.SALEAE.COM

• ALSO, EDU DISCOUNTS AVAILABLE UP TO 50% DEPENDING ON MODEL.

• KEEP IN MIND THAT LOGIC ANALYZERS ARE SAMPLING WHICHCAN CAUSE ARTIFICIAL DATA DEPENDING ON THE SAMPLINGRATE AND THRESHOLDS.

• WORKS FOR I2C, UART, SPI, JTAG, CAN, ETC, ETC

SALEAE LOGIC UI• Using the Saleae logic analyzer we can watch the pins during boot to check for

voltage spikes during. This is a good indication of either a UART, I2C or SPI connection.

System Boot Likely the boot log being transmitted over UART

SALEAE LOGIC - DECODERS

GIVEN that we SUSPECT Async Serial (UART) we will select that analyzer

SALEAE LOGIC - DECODING

Among small embedded devices 115200 is a very common bit rate so it is an easy guess. But we will also cover a more automated way of determining bit rate.

SALEAE LOGIC – DECODING(2)

We must also ensure we are configuring the device to analyze the appropriate channel (which are color coded as long as you connect them correctly)

SALEAE LOGIC – OUTPUT

As you can see we are successfully decoding the output from the UART serial connection on our Broadcom chip.

OR, HAVE YOU HEARD OF THE JTAGULATOR?• Created by Joe Grand @ http://www.grandideastudio.com• ~180-200 Bucks

CONNECTING TO INTERFACES• Bus Pirate

• Less of a learning curve• Slower transfer speeds• Supports UART, SPI, I2C and JTAG

• Shikra• No UI but faster transfer speeds as a result• Supports UART, SPI, I2C and JTAG

• TIAO USB Multiprotocol Adapter• No UI but faster transfer speeds as a result• Supports UART, SPI, I2C, JTAG, RS-232• Supports multiple connections from same device• Slightly less reliable in my experience

USING THE SHIKRA

http://int3.cc/products/the-shikra

CONNECTING TO UART

The command used to connect to a UART serial adapter will vary by device and OS but will generally be similar to the command below.

sudo screen /dev/[device id] baud rate

Or the the case of the Device ID below for the Shikra:

sudo screen /dev/ttyUSB0 115200

WE NOW HAVE SHELL!HOPEFULLY

But now what?

NO TECH HACKING

NO TECH HACKING(2)

FILE SYSTEM FIDDLINGWhy is my root a mtdblock?

But wait, what is an mtdblock?

• MTD is a "Memory Technology Device.• Unix traditionally only knew block devices and character devices. Character

devices were things like keyboards or mice, that you could read current data from, but couldn't be seek-ed and didn't have a size. Block devices had a fixed size and could be seek-ed.

• A mtdblock is a block device emulated over an mtd device.

Source: Wikipedia

FILE SYSTEM FIDDLING(2)Often times embedded device manufacturers leave important file systems unmounted.

Another good Resource:http://wiki.in-circuit.de/index.php5?title=Flashfilesystem_UBIFS

PILFERING FILE SYSTEMS

But, How do we get the file system off of the target device?

SSH WHOOPS?

Ultra quick JTAG primer• JTAG stands for (Joint Test Action Group) which was formed in 1985.• The following pins are required for JTAG use:

• TDI (Test Data In)• TDO (Test Data Out)• TCK (Test Clock)• TMS (Test Mode Select)

• The TCK Pin (Test Clock) is what keeps the clock for the state machine.• THE TMS Pin (Test Mode Select) is what determines when and how the State Machine advances

depending on it’s relative position during each clock cycle.

Source: Wikipedia

OPTIONS FOR CONNECTING TO JTAG

Good Better Best

$45 $60-$600 $5000-$20000

JTAGULATOR

HOW TO CONNECT WITH OPENOCD

The command to initiate openocd is : openocd –f interface –f target

But now what? There are errors and stuff!!!!!

#openocd on Freenode

HOW TO CONNECT WITH OPENOCD(2)Silly openocd!

That’s more like it J

USING OPENOCD

MY PET PROJECT == CEREAL

REVERSE ENGINEERING

• Binary Ninja• Free version available• Limited Architecture Support• Learn one IL to reverse them all

• Ida Pro• Paid Version required for disassembly• ARM decompiler available but $$$$• Also very good debugger

• Radare2• Free multiplatform support• No decompiler available

RADARE2

IDA PRO

OTHER NICE TO HAVES

• http://www.grandideastudio.com/hardware-hacking-training/• http://www.xipiter.com/training.html• https://www.eevblog.com• http://www.embedded.com/electronics-blogs/beginner-s-corner/

THANK YOU!!!!

ANY MORE QUESTIONS?

CONTACT INFORMATION

TWITTER: @PRICEMCDONALDLINKEDIN: LINKEDIN.COM/PRICEMCDONALD

EMAIL: PRICEMCDONALD@GMAIL.COM