Bea catalogue

Versatile and modular UHF Audio Monitoring system.

High audio quality, low power consumption andminiaturised dimensions thanks to the patented TMVWBtransmission system.

Ancillary equipment also allows re-routing of the audiosignal through several types of communication channels.

UHF AUDIO MONITORINGTMWB

The Time Modulation Very Wide Band(TMVWB) is a pulsed transmissiontechnique developed and patented byBEA.

This proprietary modulation reduces theprobability of detection and interceptionwith RF detectors or other conventionalsweeping techniques and drasticallyreduces the average power consumptionof the transmitter, allowing operatingtimes over 30 times longer thanconventional transmitters with the samepeak output power level.

TMVWB devices produce an excellentaudio quality thanks to the widebandwidth and high dynamic range, andare particularly indicated for long termdeployments using small battery packs.

The TMVWB family of transmitters is characterised by a thin package, making it an ideal candidate for deployments where deep concealmentis paramount. Available in several versions, each one developed to answer specific operational requirements and fully compatible with allother system components, BEA’s micro transmitters can also be remotely controlled by an external miniature RF Switch.

Transmitters

Micro2 NTRepresents the basic transmitter of theTMVWB family and is characterised by anexceptionally small footprint. Its very lowpower consumption allows operatingtimes in excess of 700 hours using astandard 9 volt Lithium non rechargeablebattery.

Adoption of the latest generation ofsemiconductor devices and a carefullydesigned layout ensure frequencystability and power efficiency. It can beeasily concealed, and includes a thin wireantenna for quick transmitter installationand rapid system deployment.

Micro2 HP NTA high powered version of the Micro2 NTis also available in order to provide arobust radio link in situations wherelonger distances between the target andthe observation post may be required.

The addition of an internal RF amplifierincreases the operational range of theMicro2 HP NT transmitter whilstmaintaining power consumption wellwithin the capability of battery packs.

The built-in AGC ensures an optimalaudio level even in difficult acousticalenvironments.

Micro3A revised modulator gives Micro3 anextended audio bandwidth of up to 8KHz, providing exceptional speechintelligibility even in reverberantacoustical environments.

The built-in automatic microphone gaincontrol ensures that an optimal audiolevel is transmitted at all times,irrespective of the acoustical level in theenvironment.

Micro2 STMicro2 ST pushes the boundaries ofconcealment & miniaturisation.

This special-purpose transmitter uses aproprietary low profile radiator andmatching network design instead of theusual 1/4 wave wire antenna.

The solution decreases its effectivefootprint and thus allows rapiddeployment in confined spaces withoutthe need to worry about the placementof the antenna.

Micro2MagneticMicro2 Magnetic is a coin-shapedtransmitter with microphone, antennaand battery embedded in a compactpackage.

The magnetic support allows quickinstallations onto metal surfaces that,thanks to our proprietary matchingnetwork, will also act as an antenna.

Easy to use and to conceal: once set up,the two non-rechargeable Lithiumbatteries ensure up approx. 200 hoursworking.

NEW

Master MTCUniversal docking station for all BEA RFaudio transmitters: it contains the userinterface, power management system,audio and control buses management.

Different RF modules can be seamlesslyfitted onto the receiver: this approachhas the advantage of providing the enduser with a common receiving platformthat can be used with a variety of coverttransmitters, substantially reducing costsand the amount of training requiredwhenever a new covert device isintroduced in the end user's kit.

A user-friendly interface enablesmonitoring of the device’s status,switching of the reception frequency andcontrol of the optional audio recorder.

External connectors, carrying digital andanalogue audio signals, allow for livemonitoring and re-routing of the signalvia other RF or wired vectors and thebuilt-in rechargeable lithium batterypack gives up to 8h of continuousoperation.

REC VERSION

On request, the MTC can also beequipped with an embedded digitalrecorder; the recorded audio can beretrieved using a custom softwareapplication thus ensuring the safety ofthe recorded tracks.

Memory sizes of up to 16GB are currentlysupported by the device.

ModuloMCThe Modulo MC receives anddemodulates the RF signal from all ourTMVWB transmitters.

Baseband demodulation and processingis carried out by a high performancemicrocontroller, allowing a better signalto noise ratio compared to receivers fromthe previous generation.

Receivers

Micro RL NTCompact single channel receiver unitdesigned for quick operations.

The Micro RL NT is factory set on thefrequency and bandwidth of a chosentransmitter (Micro2 or Micro3 family).

NT and PLUS REC VERSION

The recorded audio is saved to a removable microSD card using a proprietary file systemthat can only be read by a specialized software application provided by BEA. This ensuresthat only authorized parties can access the recordings.

Micro RL PLUSMicro RL PLUS has 4 factory setfrequencies: 300 | 325 | 345 | 365 MHzthat can be manually selected by theuser.

Micro3 signal requires dedicated version.

The receiving part of the system offers two options:- a modular solution allowing to manage Micro2 and Micro3 transmitters set on different frequencies and with advanced features.- a compact dedicated tactical receiver, MICRO RL, factory set on specific Micro2 or Micro3 transmitter frequencies.

The REC version embeds an SD-card based digital recorder, where audio is saved using a proprietary file system.

Relaunchers

DeltaGSM repeater for the TMVWBtransmitters. It features an auxiliary audioinput that can be used to connect a localmicrophone or an additional RF receiver.Receiver frequency can be changedremotely and an integrated AFCperiodically tracks the transmitterfrequency, ensuring automatic correctionof any drift.

Dual SIM capability increases thereliability of the communication. Thedevice provides several sensors that canbe programmed to trigger a call and/or arecording, as well as auxiliary digitalInputs and Outputs. Alarms andbehaviours can be programmed viaDTMF, SMS messages and using theoptional PC interface ENEA MANAGER,allowing also the scheduling ofunattended activities. Micro3 T requiresdedicated version.

REC VERSION

An internal solid state recorder isprovided in the Delta REC version,allowing local audio recording as well asreal time monitoring. Audio files can becreated whilst the GSMmodule is off anddownloaded at a later time, thuspreventing discovery during an anti-sweeping activity. Track length can beconfigured by the user for easierdownload and processing. Max.recording capacity: 18 hours.

Ponte NTPonte is a power efficient repeater fortransmitters belonging to the TMVWBfamily. The signal received by theModuloMC interfaced to the repeater isretransmitted over one of four availablechannels within the same 300-390 MHzband.

It incorporates an automatic frequencycorrection algorithm that ensures long-term signal quality during extendeddeployments in harsh environments.An internal rechargeable battery packallows rapid deployment of the Ponteeven when a power source is notimmediately available.

RF/GSM InterfaceThis interface receives and decodes thesignal from the TMVWB transmitters andforwards it to the GSM audio monitoringdevices ENEA/ENEA REC.

This solution increases the modularityand interoperability of several BEAsolutions as it allows the Enea device tomanage the input from a wirelessmicrophone.

Ponte RuggedTactical deployment solution embeddedin a ruggedized case. Provided with LiPorechargeable batteries for anautonomous activity.

Capacity can be customized based oncustomer needs. LED placed externally onthe case allow a remotemonitoring of theunit activity and of the batteries status.

QUICK TIP

Receiver InterfaceThis stand-alone hardware interfaceallows re-routing of the audio signalreceived by the modulo MC via digitalencoding systems and IP senders.

The received frequency is set by theMaster MTC and the signal can bemonitored locally using headphones.

QUICK TIP

Power Management

Remote Control

Switch &TCSWITCH is a miniaturised RF controllerthat can be used to remotelyenable/disable external loads.

Switch is Configurable via PC and easy toinstall since only two connections arerequired, one to the DC power supply (upto 15V) and the other to the load.

The standard receiver can drive a singleexternal load; on request, however, it ispossible to customize the system,enabling it to drive up to 3 independent

channels: two with maximum load of 5 Aand one with maximum load of 2 A.

On request, it can also be equipped withfive digital level outputs, enabling theSwitch to interface with externalelectronic equipment.

PW 124040 mA 12 V power supply for all Micro2and Micro 3 transmitters.

Micro Battery StickSmall and slim, it embeds a sensitiveKnowles microphone and a 60 mAh – 12V LiPo source. It’s the ideal solution forquick deployment in a short terminstallation, where a good radio link isparamount

Micro2 HPTabletRugged tablet embedding one Micro2 THP/Micro 2 NT transmitter and 3 off 1400mA 3.6 V LiPo batteries.

A switch on the device activates thetransmission.

The transmitter can be removed from thetablet and used in other concealments.

BEA’s product range includes effectivetools for the acquisition andmanagement of audio data.

Based on the complexity of therequirement and the number of targetdifferent solutions are available:

VicRecorderVicRecorder GSMThis recording suite allows the recordingand processing of audio signals comingfrom our range of RF receivers directly ona standalone PC. It extends the recordingcapacity of local receivers by using the PCHDD. The application is supplied andlicensed on a dongle, giving the userflexibility on the hardware side.

If a suitable modem is connected, theapplication can also manage audiocontent delivered through the GSMnetwork. The audio signal is recorded onthe computer's HDD without alterationand, for monitoring and playbackpurposes, VICRECORDER allows the userto apply audio enhancement in real timeto both “live” and recorded signals.

The tracks can be managed, processedand exported in a blotter for evidenceuse. CD/DVD Burning functionality isincluded.

GateProfessional lawful interception systemdesigned to monitor the activity ofmultiple targets over fixed and mobiletelephone networks as well as over theinternet.

Gate represents a powerful client/serversolution for Law Enforcement Agenciesthat need to centralise their monitoringactivity.

Please contact our Sales Department toevaluate best configuration for youroperational needs.

Recording & Processing

BEA S.r. l . - Via Santorel l i , 8 - 10095 Grugl iasco (TO) - Italy Ph. +39.011.3285311 - Fax +39.011.3285312 - info@beanet. it

CA

TE

C/11

10/11-W

EE

Eregistration

numberIT08020000003147

Theinform

ationgiven

inthis

datasheetareindicative

onlyand

subjecttochange

withoutnotice.N

opartof

thispublication

may

bereproduced,stored

ina

retrievalsystem,ortransm

itted,inany

formorby

anym

eans,electronic,mechanical,recording,orother,w

ithoutthepriorw

rittenperm

issionofB

.E.A

.S.r.l.

international partnership network able tocomplete the technology offer.

The internal Production Departmentpresence lets possible the completecreation and customization control, onthe basis of customer needs and locallaws.

Punctuality and quality in finding thesuitable solution are significant aspectsof our operative philosophy which aimsto satisfy customer needs.

Key-points of the Company are thetechnology approach and the constantresearch for innovation, achieved thanksto our internal Research andDevelopment department and an

ABOUT US

Digital audio surveillance system characterised by reduceddimensions, extensive features and high reliability: ideal fora quick deployment and for both short and long termoperations.

The proprietary audio encoding and encryption minimisesthe possibility of interception.

UHF AUDIO MONITORINGDIGITAL

Professional audio surveillance systememploying proprietary digital encodingand FSK modulation and allowing safedata transmission.

The system operates between 431 and439 MHz and its narrow-band emissionresembles that of low bit-rate ISMtelemetry services, thus reducingdetection probability.

Easily configurable: the operatingparameters can be easily set via software,with a PC user interface, or directly viathe Digimicro R.

The system features a digital transmitter,that combines extremely compactdimensions with high output power andexceptional audio quality.

Digimicro TSmall footprint, high output power andexceptional audio quality stronglycharacterise the transmitter.The level of theRFoutput power is easily configurable from50 mW to 800 mW over 5 steps by adedicated software interface or from theDigimicro R receiver.

The audio encoder employed in thetransmitter has awidebandwidth andhighdynamic range which, when combinedwith the ability of configuring the gain ofthe microphone front-end, makes theDigimicroT ideal for deployment in difficultacoustic environments.

The device is supplied in OEM versionwitha heat-shrink sleeve in order to minimisedimensions or in plastic rugged case.

Digimicro LPA low powered version of the DigimicroT is also available in order to provide asolution in body worn and battery powersupplied application.

The output power is fix on 50 mW andallows a range up to 300 m. with acontained power consumption (40mA).The device is supplied in OEM versionwith a grey heat-shrink sleeve in order tominimise dimensions.

Transmitters

Remote Control

Switch &TCSWITCH is a miniaturised RF controllerthat can be used to remotelyenable/disable external loads.

Switch is Configurable via PC and easy toinstall since only two connections arerequired, one to the DC power supply (upto 15V) and the other to the load.

The standard receiver can drive a singleexternal load; on request, however, it ispossible to customize the system,enabling it to drive up to 3 independent

channels: two with maximum load of 5 Aand one with maximum load of 2 A.

On request, it can also be equipped withfive digital level outputs, enabling theSwitch to interface with externalelectronic equipment.

Digimicro InterfaceHardware and software programminginterface to set Digimicro transmitter andModulo.

PW 95009 V power supply for Digimicro T andDigimicro LP

Master MTCUniversal docking station for all BEA RFaudio transmitters: it contains the userinterface, power management system,audio and control buses management.

Different RF modules can be seamlesslyfitted onto the receiver: this approachhas the advantage of providing the enduser with a common receiving platformthat can be used with a variety of coverttransmitters, substantially reducing costsand the amount of training requiredwhenever a new covert device isintroduced in the end user's kit.

A user-friendly interface enablesmonitoring of the device’s status,switching of the reception frequency andcontrol of the optional audio recorder.

External connectors, carrying digital andanalogue audio signals, allow for livemonitoring and re-routing of the signalvia other RF or wired vectors and thebuilt-in rechargeable lithium batterypack gives up to 8h of continuousoperation.

REC VERSION

On request, the MTC can also beequipped with an embedded digitalrecorder; the recorded audio can beretrieved using a custom softwareapplication thus ensuring the safety ofthe recorded tracks.

Memory sizes of up to 16GB are currentlysupported by the device.

Modulo DCThe Modulo DC receives anddemodulates the RF signal fromDigimicro transmitters.

Baseband demodulation and processingis carried out by a high performancemicrocontroller.

Receivers

Digimicro RDigimicro R is a light and tacticalreceiver, developed to facilitate rapiddeployment in operational scenarioswhere the target is close by.

Configuration of the device is fast andintuitive: the provided digital displayallows setting and complete monitoringof the system's features.

The user is able to program and select upto eight RF channels andmodify the toneand level of the received audio signal.User can send the new settings to thetransmitter via serial data cable.

The unit works with an integrated 350mA rechargeable Li-Po battery grantingapprox 8 hours operational activity.AC/DC adaptor/charger included.

Digimicro ModuloDigimicro T can also be received byDigimicro Modulo. It re-launches thereceived audio through a dedicatedleased line allowing audio monitoring atthe control centre.

Digimicro AmplifierThe Amplifier acts as test device to checkthe transmitter/receiver link and as alocal audio amplifier for live monitoringof the signal received by the DigimicroModulo.

Relaunchers

BEA’s product range includes effectivetools for the acquisition andmanagement of audio data.

Based on the complexity of therequirement and the number of targetdifferent solutions are available:

VicRecorderVicRecorder GSMThis recording suite allows the recordingand processing of audio signals comingfrom our range of RF receivers directly ona standalone PC. It extends the recordingcapacity of local receivers by using the PCHDD. The application is supplied andlicensed on a dongle, giving the userflexibility on the hardware side.


The tracks can be managed, processedand exported in a blotter for evidenceuse. CD/DVD Burning functionality isincluded.

GateProfessional lawful interception systemdesigned to monitor the activity ofmultiple targets over fixed and mobiletelephone networks as well as over theinternet.

Gate represents a powerful client/serversolution for Law Enforcement Agenciesthat need to centralise their monitoringactivity.

Please contact our Sales Department toevaluate best configuration for youroperational needs.

Recording & Processing


CA

TE

C/11

10/11-W

EE

Eregistration

numberIT08020000003147

Theinform

ationgiven

inthis


onlyand

subjecttochange

withoutnotice.N

opartof

thispublication

may

bereproduced,stored

ina


itted,inany

formorby

anym


ithoutthepriorw

rittenperm

issionofB

.E.A

.S.r.l.





ABOUT US

The GSM channel guarantees secure and reliablemonitoring in situations where conventional RF devicescannot provide a safe or acceptable operating range.

Extensive configurable automatic behaviour, exceptionalaudio quality enhanced by high gain microphones and easeof operation are the main features of our systems.

GSM AUDIO MONITORING

QUICK TIPRF/GSM InterfaceEnea features exceptional audio qualityalso enhanced by high gainmicrophones. The two wiredmicrophones supplied with the ENEA canbe concealed in different areas of thetarget vehicle, making it possible to focuson conversations in specific locationinside the vehicle.

RF transmitters of the Micro family,developed and patented by BEA, can beeasily interfaced to the ENEA in order to

extend the operational flexibility of theunit.

The RF/GSM Interface receives the audiosignal from the TMVWB transmitter andis connected to the Enea for relaunch viathe GSM channel. The receivingfrequency is remotely programmed viaDTMF.

Using this configuration, the Enea unitcan therefore have remotely selectablewired and wireless microphones.

Enea System

Enea/Enea RecVersatile and flexible state of the artaudio monitoring tool: sensors andbehaviour can be remotely programmed,allowing the user to update the unit inreal time, according to the operationalneeds. It automatically calls the listeningcenter in case of motion sensoractivation, VOX event or digital input.Light sensor for discovery detection.Security Code must be entered in case ofan incoming call from the monitoringcenter, to avoid unauthorized listening.

The communication reliability is ensuredby its 2 SIM cards capability. The unit canbe programmed to switch (automaticallyor manually) between two GSMproviders, according to the BTS signalquality.

Enea Rec includes a solid state recorderwith 18 hours recording capacity that canbe activated if the GSM signal is lost or ifRF emission is not advisable. It can beprogrammed to automatically startrecording when the audio is detectedeven without GSM activation (anti-sweeping). Recording track length canbe set from 15 up to 1080 minutes.Manual or automatic track download canbe performed when the operationalconditions allow GSM communicationsto take place.

The unit can be remotely programmedvia SMS and DTMF tones or through thegraphic interface ENEA MANAGER(optional). ENEA can also be set totransmit status information via SMS.

EneaManagerEnea Manager is a powerful tooldesigned to simplify the tasks ofprogramming and managing remoteEnea, Enea REC, Delta and Delta RECunits. The software provides the operatorwith a friendly graphical user interfaceand allows the management of multipleunits.

The audio can be listened to in real timeand simultaneously recorded on the PC'shard disk. Remotely recorded tracks canbe manually downloaded or scheduledfor automatic recovery at specific timesof the day.

Enea Manager is composed by: EneaManager SOFTWARE: proprietaryapplication GSM modem: custommodem with embedded DTMF tonesdecoding allowing to operate thesoftware from a mobile workstation.

Enea Manager is composed by:

EneaManager SOFTWARE: proprietaryapplication

GSM BEA modem: custom modemwith embedded DTMF tonesdecoding allowing to operate thesoftware from a mobile workstation.

Buffer BatteryAncillary equipment to extend theoperational life of the Enea, when thevehicle power supply is switched off. It isplaced between the Enea and the carpower supply and includes tworechargeable 1400 mA batteries in aplastic case allowing full operation forapprox. 5 hrs and approx. 20 hrs in stand-by. Compatible will all versions of Eneaand Enea Rec

NEWEasily deployable unit in a robust plasticcase, featuring an embedded GSMantenna, a sensitive microphone and aninternal rechargeable LiPo battery.

Developed with an emphasis on batterylife, the unit can also be remotely put intohibernation mode to save even morepower. All operational settings can beconfigured remotely via SMS. The unitacknowledges receipt of the commandwith an answer sent by SMS to thetelephone that sent the original request.

Configurable behaviours:

Alarms enable/disable:

- motion sensor: sleeping/wake up ofthe unit and voice call to theprogrammed number

- Vox sensor: voice call to theprogrammed number.

The two sensors can work at thesame time. Alarm release timeconfigurable between 1-9 minutes.In case of no repeated alarm the unithangs up.

Mute enable/disable: an SMS allowsthe unit to accept voice calls. Thismessage has to be sent before amanual call to the unit. This serves asa security feature as well as a filter toavoid unwanted line engagementsand reduce the amount of batteryconsumption

Microphone sensitivity is settableover 4 levels.

Hang up: it is possible to interruptthe unit call via SMS

Restore unit default setting

Date and time setting, to programthe internal clock. In case of powerdisconnection, the unit loses thisconfiguration and must bereprogrammed via SMS.

The unit is able to send an SMS with thenetwork information relative to thecurrent active BTS and its neighbours.These positions can be also displayed onthe tracking GIS application DOGE. Thepositions are stored in the database andcan be retrieved for later playback andanalysis.

Thanks to its embedded rechargeable1400 mA 3.6 V LiPo battery the unit cantransmit audio for approx. 6 hrs(estimated with a network RSSI of -75dBm). The battery can be externallyrecharged by removing the caseprotection lid.

The unit can be supplied with an optionallid with connector to power the unit froman external source. Ancillary dedicatedconverters for connection to the mainsand to a vehicle, as well as externalbattery packs can be supplied onrequest.

The basic version uses an embeddedmicrophone, it is however possible tosupply the unit with an externalmicrophone. Please contact our office todiscuss the best solution for youroperational needs.

Easy GSM


CA

TE

C/11

10/11-W

EE

Eregistration

numberIT08020000003147

Theinform

ationgiven

inthis


onlyand

subjecttochange

withoutnotice.N

opartof

thispublication

may

bereproduced,stored

ina


itted,inany

formorby

anym


ithoutthepriorw

rittenperm

issionofB

.E.A

.S.r.l.





ABOUT US

Programmable digital micro-recorders with removablemicroSD memories enabling the quick collection ofinformation.High audio quality, clear speech intelligibility andconfigurable Vox.

The proprietary file format and time stamp ensure integrityof collected data.

DIGITAL MICRORECORDERS

ADMFlash

Digital audio micro recorders, extremelyeffective and easy to use. Suitable for alarge range of applications andcompletely programmable.

Knowles active microphones ensure afaithful source acquisition and an optimalintelligibility of speech, even in presenceof strong background noise, without thetypical artefacts associated with theanalysis/ synthesis type of coders (e.g.GSM, CELP).

Data is recorded on removable microSD.Compatible Micro SD cards from 1 to 8Gb per slot. Recording can be activatedautomatically by the internal Voxfunctionality that allows setting of thesensitivity threshold and release time.

Audio tracks are encrypted using aproprietary format and stamped with aunique watermark assuring theirauthenticity.

The recorded files can be downloadedonto a laptop for immediatemanagement through the dedicatedADMFlash software. VIC280 SD recordersare available in different modelsaccording to the required application:

VIC280 SD, holding 1 microSD card

VIC280 2SD Slim, holding 2microSD cards

The small dimension make them easy toconceal in everyday objects. The units aresupplied in a black plastic sleeve to limitthe form factor and contain aminiaturised Li-Ion rechargeable battery.

On request they can be supplied as OEMunits without battery and sleeve orcustomised according to the user’soperational needs.

ADMFlash is the dedicated software forthe management, filtering andvisualization of audio tracks recordedusing the VIC280 family of micro digitalrecorders.

It allows to: program the recorder listenthe recorded tracks download therecorded tracks on the PC and to convert

them into .WAV and .MP3 formatgraphically visualize the proprietary fileformat, allowing to listen and eventuallyconvert only the part of the tracks ofinterest improve the speech thanks to asystem of filtering and dynamicprocessing tools.

VIC280 SD Recorders


CA

TE

C/11

10/11-W

EE

Eregistration

numberIT08020000003147

Theinform

ationgiven

inthis


onlyand

subjecttochange

withoutnotice.N

opartof

thispublication

may

bereproduced,stored

ina


itted,inany

formorby

anym


ithoutthepriorw

rittenperm

issionofB

.E.A

.S.r.l.





ABOUT US

Small dimensions, smart power management, powerfulaudio are the common features of BEA GSM trackingunits.A proprietary algorithm allows an innovative andaccurate positioning, even in the case of lack of GPScoverage.When no database of the BTS position is available or ahigher accuracy is needed, it is possible to createproprietary GSMmap of an area using the CSS (Cell SiteSurvey System), thus tracking targets without GPSavailability, but with accuracy and reliability.

GSM TRACKING

The SMS sent by the GSM tracking unitsto the control centre contains theinformation of the Main Cell thatregistered the active terminal.

Furthermore the operator can set theremote unit to send also details on the sixadjacent cells, useful to get thegeographical position of the target.

These information are used by DOGE todisplay the position according to thedatabase available:

free database

GSM provider database

CSS database

CA

TE

C/11

10/11-W

EE

Eregistration

numberIT08020000003147

Theinform

ationgiven

inthis


onlyand

subjecttochange

withoutnotice.N

opartof

thispublication

may

bereproduced,stored

ina


itted,inany

formorby

anym


ithoutthepriorw

rittenperm

issionofB

.E.A

.S.r.l.


ABOUT US





Quad Finder LL / VLow power compact GSM unit supplied inplastic cover for concealment on targets.

Easy to program with SMS transmitted by amobile phone, it communicates its BTSpositional information via SMS to themonitoring station, which provides adisplay of its location on dedicated mapsusing DOGE software.

Polo CSSFirmware add-on to all Polo versions toperform data collection for CSS databasecreation.

Polo CSS can collect a set of informationabout the main BTS to which it is registeredand of its adjacent cells and correlate themwith the corresponding GPS position.

Data collection can be performed evenduring the tracking activity: the user canretrieve the CSS content independentlyfrom the tracking data. Advancedoperational strategies can be performedwith real time data collection.

With Doge CSS version, the user is able touse the Polo as collector unit, to downloadthe collected data and to store them intothe database. Doge CSS is an extension thatrequires a full of Doge software license.

CSS (Cell Site Survey System)When no database of the BTS position isavailable or a higher accuracy is needed, it ispossible to create proprietary GSM map ofan area using the CSS, thus tracking targetswithout GPS availability, but with accuracyand reliability.

CSS provides more precise targetlocalisation than Time Advance estimationalone can. The information sent by thetracking unit is compared with data storedin the data base and the most likely targetGPS positions are visualised on themapping display.

Developed with particular attention topower consumption in order to improve thebattery duration, the device is usuallyasleep and wakes up according to theconfiguration setup. This allowsdeployment of the unit weeks before theoperation is due to commence.

QUAD FINDER LL V adds to the QUADFINDER LL amicrophone and a panic buttonto allow audio monitoring

Remote Units

Data Display

The information sent via SMS are used byDOGE to display the position accordingto the database available.

Free database: DOGE can use freeweb database where BTS information isavailable to locate the main BTS on amap. The quality of the positioningdepends on the accuracy of thedatabase.

GSM provider database: Externaldatabase supplied by the ServiceProvider can be load on DOGE database.

The data can be processed and reportedon maps using DOGE software, whichdisplays the area associated with theBTS(s) where the device is located (TimeAdvance location estimation).

Nowadays targets are more and more aware of the possiblethreats and use countermeasures to prevent monitoring.

In some operational environments a remotely controlledstore and forward solution can be used to gatherinformation without emitting detectable radio-frequencyenergy.

The WIFI transmission technique is idealfor store and forward applicationsbecause it enables a faster connection,better range from the base station, andbetter security than Bluetooth.

Moreover, In urban environments, a Wifitransmission is less suspicious than otherRF emissions.

STORE & FORWARD

QUICK TIP

CA

TE

C/11

10/11-W

EE

Eregistration

numberIT08020000003147

Theinform

ationgiven

inthis


onlyand

subjecttochange

withoutnotice.N

opartof

thispublication

may

bereproduced,stored

ina


itted,inany

formorby

anym


ithoutthepriorw

rittenperm

issionofB

.E.A

.S.r.l.


ABOUT US





Thoro

Thoro is a high quality digital audiorecorder developed specifically for covertapplications. Configuration and datadownload is performed via WIFI.

The device supports mono and stereorecording via two external microphones.

The low-noise analogue front-end anddigitally controlled AGC ensures anoptimal signal to noise ratio and its highquality 16bit ADC provides 86dB ofdynamic range (excluding the AGC).

The audio signal can be digitized usingsampling rates between 8 and 32KHz andsaved to memory in uncompressed PCM.

The recorded audio is saved to aninternal memory using a proprietary filesystem. Recordings must be extracted viaa custom application that allows theconversion to a standard MP3 orWAV file.

The unit, supplied with an 8 GB memory,allows more than 1 day of audio data to

be stored, using the highest recordingquality (16 bits 32 Khz).

Memory sizes of up to 16GB are currentlysupported by the device and areavailable on request.

Recording can be automatically activatedby a VOX or vibration event or at specifictimes: the internal clock is powered by aseparate miniature rechargeable Lithiumbattery, ensuring absolute accuracy ofthe recording time-stamps.

Once programmed the user can switchtheWiFi off and activate it manually witha dedicated remote control that alsomanages the unit power supply.Alternatively, the unit can be set for aperiodic wake up and automaticdownload of the tracks.

The configuration is performed over theair via theWiFi connection:- recording mode (mono/stereo)- recording quality (sample rate, bit

depth)- date/time- VOX and motion threshold, release

and attack times- one-off and periodic timed activations- SSID- WiFi channel- automatic WiFi activation and

automatic track download

The unit uses an internal chip antenna

and is supplied in a robust plasticcontainer. To facilitate its concealment, itcan also be supplied in OEM version withthermoplastic sleeve that further reducesthe unit’s footprint.

A led on the unit reports power status,recording and downloading status.

Please contact our Office forrecommended ancillary items, such ashigh-gain receiving antennas that canextend the unit’s operational range.

THORO MANAGER, supplied in theTHORO KIT, is the custom application tomanage the unit, read and download theaudio files.

The "Monitor" feature allows listening tothe live audio and simultaneously recordon the card. The monitoring feature ismeant mainly to test the audio settingsand not to perform a real time audiomonitoring since, due to bufferingrequirements, there may be a delaywhose entity depends on the bandwidthavailability (<10 secs). The monitoredaudio is sent in the lowest bit depth (8bit)but is recorded using the settings givenby the user.

BEA tracking units are the result of a cooperative effortutilising the extensive design and manufacturingexperience of BEA and the real world knowledge ofintelligence professionals.

All tracking units are managed by DOGE, a proprietarydedicated interface available in client/server or as astandalone version with web link.

GPS TRACKING

Flexible and modular systems can beemployed both as loggers and as realtime tracking units, managed by a widerange of options for collecting,transmitting and displaying geographicposition data on a map.

The units are remotely configurable witha large number of event-actioncombinations, allowing advancedbehaviours and smart powermanagement.

The positions through the GPS networkcan be stored on the units andtransmitted via SMS, CSD, GPRS orsatellite link.

NEW

Tracking Devices

Polo NTPolo NT is the latest addition to theGSM/GPS tracking product line. BEA hasupdated the design of this establishedGPS surveillance products to increasedeployment versatility while reducingenclosure size and power consumption.

Suitable for both tactical and long terminstallations, Polo NT is extremely easy todeploy, thanks to its minimal dimensions:it is available both in sturdy blackAluminium case and magnetic supportand in bare-bones format for effectiveembedding and camouflage in daily lifeobjects.

Its multisource power supply allowsconnection both to the main source (7-50 Vdc) of a vehicle and to an externalone 3.7 Vdc buffer battery. The unitmonitors the battery powerconsumption.

Polo NT is characterised by an advancedpower saving management:

it is possible to configure alarms toseparately manage the GSM and/orthe GPS module (on/off ) and otherfunctionalities.

the unit is able to monitor the GSMnetwork: POLO switches the GSMmodule off, when no GSM coverage isdetected; a time interval can be setbetween new connection attempts.

the unit can be put into hibernation,allowing it to efficiently work as alogger.

automatic antisweeping profiles canbe enabled to ensure operationalsafety.

Polo NT is an intuitive event/actionprogrammable unit with alarmactivation: movement, geo-fence, clocks,timers, country change, batterymonitoring, etc. Configuration presetscan be saved for automatic upload onconnection.

Polo NT is remotely managed via SMSand CSD and sends data via GSM or GPRSwith a proprietary protocol, grantinghighly reliable communications. The usercan also view the fix sent on a phonethrough the Garmin Mobile XT*application or via Internet on PDA (e-mailor DOGEWeb Viewer connection).

It works as GSM tracking unit when GPScoverage fails and sends GSM BTS info tothe DOGE software allowing targetlocalisation also in difficult conditions.

Memory capacity: up to 1 million fixes.The data stored on the unit can beretrieved by the monitoring centremanually or automatically, through aselective and secure download that canbe recovered in case of interruption.

*Tested with Nokia N and E series

Polo XXThis version of Polo is encased in a plasticcase housing two non-rechargeable highcapacity battery. It also embeds GPS andGSM antenna.

The unit can be set with a basic energysaving configuration to supportextended deployments without operatorintervention.

Polo XX is provided with a magneticmount for fast and easy installation.

Polo NTVPolo NT with additional possibility ofremotely monitoring the target audio.The voice feature does not increase theunit’s footprint and can be managed viaDOGE or SMS. Polo V can be called orautomatically calls the destinationnumber based on the configured eventsautomation.

It can transmit GPS position via SMS inreal time in order to track the target andmonitor the audio signal in the vehicle atthe same time. Audio files can be savedon dedicated applications developed byBEA.

CabotoBased on the main features of Polo,Caboto has in its compact dimension a3,7 LiPo rechargeable battery and can besupplied by any source between 7-30Vdc.

External I/O is provided by an 8 pinconnector that can be used to manageexternal activations and devices, as wellas an external auxiliary power supply at3.6 V.

Caboto is highly configurable andenables advanced power saving andevents monitoring strategies.

Polo CSSFirmware add-on to all Polo versions toperform data collection for CSS databasecreation.

Polo CSS can collect a set of informationabout the main BTS to which it isregistered and of its adjacent cells andcorrelate them with the correspondingGPS position.

Data collection can be performed evenduring the tracking activity: the user canretrieve the CSS content independentlyfrom the tracking data.

Advanced operational strategies can beperformed with real time data collection.

With Doge CSS version, the user is able touse the Polo as collector unit, todownload the collected data and to storethem into the database.

Doge CSS is an extension that requires afull of Doge software license.

GloboAdditionally to the SMS, CSD and GPRScommunication channels, Globo addssatellite network service, thus improvingthe tracking possibilities in absence ofGSM coverage.

Iridium network enables user to receivereal time cyclical position informationand manage device configuration. Itintegrates a Caboto and an Iridiummodule, keeping the flexible features ofall BEA GPS units.

It can be powered with an external powersupply ranging from 7 up to 50V. Globois able to switch automatically betweenGSM and satellite communication

channel following GSM networkavailability, or to be selectively registeredto the GSM network or Iridium networkonly.

The data message is transmitted acrossthe Iridium satellite network utilizinginter-satellite links to reach the IridiumGateway.

From there the data message istransferred via e-mail and stored in adatabase for further data processing.Data messages are delivered following a“mail-box check” initiated by the remoteapplication.

GoGO is a “ready to go” GPS tracking unitcontained in an automotive plastic casethat holds GSM, GPS antennas.

An optional additional lid containing a1400 mAh Li-Po rechargeable batteryextends the operativity when the mainpower source is not available.

It is a powerful remote unit that can workas a logger or as a real time device unitwith basic tracking configurations. It iseasily event/action programmable.

Our proprietary client/server GIS trackingapplication DOGE provides a userfriendly interface to program the unitand monitor battery capacity.

The unit employs a quad band GSMmodem and uses SMS, CSD or GPRSprotocols to send tracking information &alarms and receive configurationsettings.

NEW

DogeProprietary software managing all GPSand GSM tracking units developed byBEA.

Flexible and modular, it allows operationas both standalone workstation and onclient/server basis and to manage adatabase with possible selections andfiltering of the contained information.

Its graphic interface is extremely intuitiveand easily customizable by the customer.User management rights based onprofiles, password protected.

The client/server option allows anextranet connection on IP address to theWeb Viewer interface.

Communication between the remoteunit and Doge is based on proprietaryprotocol, for high reliability & security.

Positions sent by the remote units viaSMS, CSD or GPRS, are displayed onMapPoint2010, Raster Maps, GoogleMaps or played on Google Earth with anexternal plug-in. Data can be exported inreal time or saved in NMEA0183 format.

Doge CSSWhen no database of the BTS position isavailable or a higher accuracy is needed,it is possible to create proprietary GSMmap of an area using the CSS (Cell SiteSurvey System), thus tracking targetswithout GPS availability, but with goodaccuracy and reliability. CSS is a useful

tool for the GSM tracking because itprovides more precise target localisationthan the Time Advance estimationtechnique. The information sent by thetracking unit is compared with datastored in the data base and the mostlikely target positions are visualised onthe mapping display.

Data collection for CSS database creationcan be done through the GPS trackingunit Polo CSS and its versions. It canrecord a set of information about themain BTS to which it is registered and of

its adjacent cells and correlate themwiththe corresponding GPS position. WithDoge CSS software the user is able to setthe Polo as collector unit, to downloadthe collected data and to store them intothe database.When the GSM remote unitsends an SMS with a GSM position thesoftware searches and matches it in thedatabase and displays the correlated GPSinformation on the map.

Doge CSS is an extension of Dogesoftware, so it requires full Doge license.

Managing Software


CA

TE

C/11

10/11-W

EE

Eregistration

numberIT08020000003147

Theinform

ationgiven

inthis


onlyand

subjecttochange

withoutnotice.N

opartof

thispublication

may

bereproduced,stored

ina


itted,inany

formorby

anym


ithoutthepriorw

rittenperm

issionofB

.E.A

.S.r.l.





ABOUT US

System designed to receive, record and play data acquiredmonitoring a target via fixed and mobile telephonenetwork, RF eavesdropping and Internet connection.Powerful solution for Law Enforcement Agencies to processall data acquired and enhance the efficiency of their dailyoperations.

The client/server architecture centralises the data anddistributes them also to local or remote client workstations.

LAWFUL INTERCEPTION

Gate

The system access to the data isextremely secure. All collectedinformation is recorded on a serverwhere the operational policies areenabled according to a defined hierarchy.The clients transmit the entry request tothe service connection manager in anencrypted way.

At the same time all data are recodedonto the internal database, becomingavailable for future play back, analysisand investigation.

Login and password are not memorizedon the client to prevent unauthorizedaccess.

The files exported on CD-ROM/DVD areencoded with an algorithm to avoid anyunauthorized reading in case of loss.

ServerThe client/server system is expandableand it allows to add more servers toincrease the acquisition performance andthe amount of lines to be monitored.

All clients are connected to the GATESEVER through a LAN Network.

ClientGATE CLIENT terminal has been studiedand developed to optimise and speed upall activities. Through a user friendlyinterface the operator can easily manageall data collected from the monitoringactivity of:

Fixed telephone line - audio and fax

GSMNetwork -audio,SMSandvideocalls

GSM and RF remote units

E-mail and Internet web pages

The software allows to manage theinvestigation from the very start, takingadvantage of:

real time audio and data playing

pre-recorded play back

automatic connection betweentracking data (IRI/CDR)

searching and ordering features

blotter

partial decrees managing

Recorded data can be visualized on atable which sums up the most importantinformation related to each record.

Filtering of the list allows the operator toreach the desired record in a fast andeasy way. In case of GSM connection theposition of the BTS to which the targetwas registered during the monitoringactivity is shown on the screen thusenabling also a target positioning.

The system manager can:

Create, modify or delete a completemonitoring activity that encompassescommunications monitoring, targettracking and audio eavesdropping.

Create, modify or delete investigationteams assigned to a monitoringactivity.

Create, modify or delete the profilesassociated to each of the system’sauthorised Operators

Each database line corresponds to adecree. Clicking on it the administratordirectly visualises and can modify alldetails about the decree. The “burn”feature sets the selected burning deviceand the backup interval.

Data CollectionManagementAll collected data, coming from alloperators, are available for cross-processing management. A specific IDcard, containing personal details,address, vehicles, minutes, etc., can beconnected to each data entry.

Users can play, transcribe or write a briefresume of the track at the same time. Incase of fast speech or strongpronunciation, the transcription can befacilitated by slowing down the speedduring the listening, without alteringpitch and tone.

To facilitate the editing of the draft it ispossible to set the option of cyclicalrepeat of the listened track. This featurecan be directly managed by keyboard. Italso possible to insert some trackmarkers to quickly visualize a relevantrange in the timeline.

Speech identification is made easier byusing the available noise filter.

VICRECORDERThis recording suite allows the recordingand processing of audio signals comingfrom our range of RF receivers directly ona stand alone PC. It extends therecording capacity of local receivers byusing the PC HDD. The application issupplied and licensed on a dongle,giving the user flexibility on thehardware side.


The tracks can be managed, processedand exported in a blotter for evidence

use. CD/DVD Burning functionality isincluded.

The tracks can be recorded in three ways:

Signal-driven triggerThe application monitors the level ofthe incoming signal and beginsrecording once a set threshold isexceeded.

Manual recordingRecording is manually initiated by theuser via simple commands on theuser interface.

Modem triggerRecording is initiated once anincoming call is detected on a GSMmodem connected to the PC.

Audio analysis and filtering tools can beused to enhance the speech qualityduring the transcription process:

- Frequency analysis

- FFT manual filter

- FFT tone filter

- Broadband FFT filter

- Low Shelf/High Pass filter

- Fully Parametric/Band Pass filter

- High Shelf/Low Pass filter

Audio Recording and Analysis


CA

TE

C/11

10/11-W

EE

Eregistration

numberIT08020000003147

Theinform

ationgiven

inthis


onlyand

subjecttochange

withoutnotice.N

opartof

thispublication

may

bereproduced,stored

ina


itted,inany

formorby

anym


ithoutthepriorw

rittenperm

issionofB

.E.A

.S.r.l.





ABOUT US

VICFILTERVICFILTER is a tactical audio processor,designed to provide real-time analysis,filtering and enhancement tools foraudio signals acquired via the sound cardof the PC.

The processed signal can be alsorecorded directly to disk. Its simple userinterface and low MIPS requirementsmakes it ideal for those operationalscenarios where only a small laptop canbe used.

It also allows to process previouslyrecorded audio files stored on variousmemory support (HD, CD, DVD, USB key).VICFILTER’s tools allow to reduce theaudio noise and improve speechintelligibility.

The user interface gives a rapid andaccurate access avoiding complexwindows and menus.

A comprehensive waveform visualiser isprovided, allowing the operator toconcentrate on areas where a vocalactivity is visible.

Audio analysis and filtering tools can beused to enhance the speech qualityduring the transcription process:

- Frequency analysis

- FFT manual filter

- FFT tone filter

- Broadband FFT filter

- Low Shelf/High Pass filter

- Fully Parametric/Band Pass filter

- High Shelf/Low Pass filter

Stand-alone or Network based solutions tailor-made tospecific signal inhibition requirements.

Our jamming solutions adopt advanced technology capableof simultaneously blocking GSM 900, GSM 1800, UMTS,DECT,WiFi and Bluetooth devices.

JAMMERS

Mobile Phones

JammBoxJamm Box is a unit developed to inhibitGSM, DECT and UMTS frequencies in afixed environment and in thoseapplications where there is lack ofinstallation space.

It is equipped with four omnidirectionalantennas and can be customised withdifferent antennas on request.

The unit can be remotely controlled:start/stop of the inhibition activity andoutput power increase/decrease.

JammBox PlusJamming system for 900/1800/2100 MHz2400 to 2500 frequencies contained in anelectrical box for easy installation.

The antennas are placed in a separatebox in order to increase installationflexibility.

Both units are powered by 220V and arehidden in common electric gray boxes(230x310x130 mm).

A prior analysis of the installationenvironment is necessary in order toidentify the best configuration.

JammBagJamming units contained in a ruggedcase. The device is manually activatedand is able to jam 2G, 3G, Wifi andBluetooth frequencies. It embeds arechargeable battery pack thatguarantees 2-3 hours operation and canbe also powered from the mains powersupply. Directional antennas are fitted inthe upper part of the case and can bereplaced by (optional) omnidirectionalones.

2G

3G


CA

TE

C/11

10/11-W

EE

Eregistration

numberIT08020000003147

Theinform

ationgiven

inthis


onlyand

subjecttochange

withoutnotice.N

opartof

thispublication

may

bereproduced,stored

ina


itted,inany

formorby

anym


ithoutthepriorw

rittenperm

issionofB

.E.A

.S.r.l.





ABOUT US

POWER MANAGEMENT

Remote Control

Switch &TCSWITCH is a radio controller, small andready to use, greatly useful to connectexternal devices and to control themremotely.Configurable via PC , it is easyto set up because it just has twoconnectors: one to connect the DCPower Supply (up to 15V), the other toconnect external equipment.

Using the remote control TC, it can turnON or OFF the equipment connected tothe output of receiver.

The standard receiver can drive only oneexternal equipment. It is possible, onrequest, to drive up to 3 independentchannels: two with maximum load of 5 Aand one with maximum load of 2 A.

On demand, it could also beimplemented with five digital I/O thatcan work as interface with externalelectronic equipment. The SWITCH’s LEDgives an immediate feedback to theoperator through small flashes.

CA

TE

C/11

10/11-W

EE

Eregistration

numberIT08020000003147

Theinform

ationgiven

inthis


onlyand

subjecttochange

withoutnotice.N

opartof

thispublication

may

bereproduced,stored

ina


itted,inany

formorby

anym


ithoutthepriorw

rittenperm

issionofB

.E.A

.S.r.l.


ABOUT US





NEW

Power SuppliesBEA power suppliers are featured bycompactness and great versatility.

The output tension is extremely stableand the devices are noiseless. They areprovided with protection againstoverload and short circuits.

The device are supplied in OEM versionwith a black heat-shrink sleeve or resinbonded.

VIC560-AVIC560-A is an actuator that can be usedto automatically reset a connecteddevice, switching it off and on every sixhours.

Power Management

Step-up BatteryStep-up circuit able to use the non-rechargeable battery packs (ex LiSoCl2)that may not support the consumptionpeak when close to be discharged.

PW940 PW990 PW6100 PW9500

V in 230 V ac (±10%)230 V ac(±10%)

230 V ac(±10%)

230 V ac (±10%)120 V ac (±10%)

V out 9 V dc 9 V dc 6 V dc 9 V dc

I out (n) 40 mA 90 mA 100 mA400 mA

(peaks 500 mA)

dim. (mm) 36 x 12 x 10 36 x 17 x 12 33 x 17 x 13 48 x 19 x 17

PW12500 PW8300 PW1240

V in230 V ac (±10%)120 V ac (±10%)

230 V ac(+/-10%) 230 V ac(+/-10%)

V out 12 V dc 8 V dc 12 V dc

I out (n) 400 mA (peaks 500 mA) 300 mA 40 mA

dimensions 48 x 19 x 17 mm 35 x 17 x 13 mm 36 x12 x10 mm

3G based video transmission offering great installationflexibility and modularity.

All-in-one system that can be easily integrated with allanalogue cameras.Highly secure transmission thanks to the dynamicencrypting algorithm.

VIDEO MONITORING

The UMTS technology does not needconnection to the lead line or big sizeantenna. The transmitter concealementis easy even in hostile environments.

It is able to:

transmit via 3G (GPRS, EDGE, UMTS,CDMA, HSDPA) on IP network, audio,video (4 CIF) up to 25 fps

record video and/or snapshot of theimages on a removable solid statememory card

localize and store the GPS position inthe memory, showing them on thevideo.

VSGAMMA3

VSGAMMA3 is a video transmitteroperating on 3G Networks. It embeds arecorder and a GPS receiver. Thanks tothe UMTS technology, it needs neitherconnection to a fixed line or largeantennas and is therefore easy to concealin hostile environments.

The system transmits and records videodata in H264 format, providing a far moreefficient algorithm for compressing videothan any other compression methodavailable, giving best performances on3G channel.

Other codecs with higher definition andlower compression rates are alsosupported (MPEG4, MJPEG). Packettransmission on TCP/IP or streaming onRTSP are supported.

RTSP permits higher frame rate whereasTCP/IP allows synchronised and bufferedaudio transmission.

The bidirectional audio transmission canbe configured in high or low quality(G711 and G723 audio compression) toeither eavesdrop the environment or toremotely control devices via DTMF tones.

When the UMTS coverage is notavailable, it records video data on itsembedded memory card.

The system can be activated by alarmsgenerated by a video motion detectionor triggered by an input. When an alarmis detected the unit sends a SMS alarm oran e-mail containing the first frame of thevideo caught. Transmission can be alsoprogrammed based on time setting.

VSGamma3 has 2 inputs and one outputto interact with external sensors. Pan-tilt-zoom and dome cameras supportingfollowing protocols SONY VISCA, PELCOD, PELCO P, SAMSUNG, PHILIPS,VIDEOTEC, KARATEL can be managed byjoystick or by user console.

Available in two versions to connect oneor up to four analogue cameras.

Professional video recorder software for acomplete top level IP recording system.The software allows remote visualisation ofmultiple sites and territorial areas.

It can records from an unlimited number ofconnected clients. Multi-users and multi-monitors, it operates as HTTP server,Streaming server and Proxy video. It isavailable both in stand-alone andclient/server versions.

Managing Software


CA

TE

C/11

10/11-W

EE

Eregistration

numberIT08020000003147

Theinform

ationgiven

inthis


onlyand

subjecttochange

withoutnotice.N

opartof

thispublication

may

bereproduced,stored

ina


itted,inany

formorby

anym


ithoutthepriorw

rittenperm

issionofB

.E.A

.S.r.l.





ABOUT US

Technology

Bea catalogue