Liquid Solar Pool Covers By Flexible Solutions

Evaporation is the major source of heat loss for all swimming pools. To minimize energy/heat loss one must cover the pool

Covering the pool is the single most effective means of reducing energy/heat loss

Why use a Pool Cover?

Ease of use and installation

Inexpensive – Low capital costs and maintenance

Works 24 / 7, even when pool is in use

Safety Allows pool to be viewed to the bottom

Avoid entrapment

Commercial liability

Why use a Liquid Pool Cover?

Benefit Comparison

Plastic Pool Blanket HeatsavrTM and EcosavrTM

Application

Time consuming, potentially complicated and can

require more than one person. Automatic, hands-free easy application that

requires absolutely little storage and no labor to

apply Requires roller and storage.

Effectiveness

Savings of 50-70% can be achieved but only

when the cover is correctly covering the pool!

Savings from 15% - 45% can be achieved 24

hours a day, 7 days a week. You will be fully

covered

Difficult to cover free form pools and around

fountains and/or waterfalls.

Easily cover free form pools, and can cover

around water falls and faountains

Esthetics Even a high quality plastic pool blanket diminishes

the beauty of a back yard area

The liquid cover is entirely transparent and allows

your pool to look its natural best

Safety While a pool cover is in use, there is always a risk

that a child or pet will become trapped underneath

the cover.

HeatsavrTM and EcosavrTM are safe for all pool

users. Pool owners and operators can relax,

knowing that their pool is covered at all times.

The active ingredients in liquid pool covers are biodegradable organic compounds. Extensive testing proves that the active ingredients we have chosen do the best possible job at reducing evaporation, saving water and energy in every pool

The carrier agent is a bio-based Ethanol which evaporates off the pool water within minutes of being dose. Ethanol allows the active ingredients to spread out quickly and effectively. When the carrier agent is not an alcohol, as in some competing products, the resulting application is a slurry or milky solution, which spreads more slowly and may coagulate.

What is it made of?

HeatsavrTM consists of molecules that are attracted to water at one end and repelled by water at the other. Each molecule entangles with its neighbors forming a barrier that slows the evaporation of water molecules

Molecules spread out at a rate of 6 mph

The Science

Heatsavr™ Is the patented liquid pool cover developed by Flexible Solutions over 15 years ago

Developed by Dr. Robert O’Brien, chemical engineer, surfactant chemist

Ecosavr™ Is a small plastic fish that dispenses HeatsavrTM through a valve in the dorsal fin

Patented design

Liquid Pool Cover Products

Available in 1L bottles

4L jugs (Approx. 1 gallon)

Heatsavr Kit

Automatic Metering System

5 gallon pails available

HeatsavrTM

Dosage: Commercial: 1 oz / 400 sq. ft. daily

Residential: 4 oz / 400 sq. ft. weekly

Automatic Metering System (HS115) The HS115 consists of a 7-day programmable timer and a peristaltic pump

This installation can be done at residential or commercial locations

The AMS is designed to accurately, reliably and inexpensively dispense Heatsavr™

Application Methods

HS115 Installation Schematic

For residential pool owners

Once a month application

Just snip the fin and toss it in!

Packaged in attractive boxes that can hang or stand nicely on a shelf

Sold in cases of 60 fish, including 4 – 15 pack display cases

EcosavrTM

Backyard pools – Above and in ground

Indoor pools – Humidity control

Free form pools – No limitations on coverage

Spill over – Spa to Pool

Negative edge – Consider circulation and design

Commercial – Olympic, wave or other

Who should use Liquid Pool Covers?

HeatsavrTM molecules are .08 microns

Sand Filters – 20 – 25 microns filtration

Cartridge Filters – 5 – 10 microns

DE Filters – 3 – 5 microns

Probes, Pumps and other equipment

Skimmers and Filtration

pH Neutral No adverse effects on chemistry Chlorine/Bromine and gassing off Ozone, UV treatment and flocculants

Pool Chemistry

“ In conclusion, pool water quality components common monitored by pool operators, including: free, total and combined chlorine; water temperature, total dissolved solids, cyanuric acid, pH, total alkalinity, calcium hardness, saturation index, iron, copper, nitrates, phosphates and clarity were not affected by the addition of Heatsavr. Minor fluctuations in water chemistry that occurred during the 30-minute test periods were more likely a consequence of normal chemical consumption resulting from introduction of bather and environmental wastes, and automated chemical injection.”

Alison Osinski, Ph. D.

HeatsavrTM has been in use for 20+ years around the world and has never caused a single health or safety issue

There have been multiple 3rd part health & safety tests conducted on HeatsavrTM

Read Safety Data: www.liquidpoolcovers.com/safety-data.htm

Safety Data

HeatsavrTM is accepted by the NSF “It is my opinion that under conditions of intended use the isopropanol component of Heatsavr presents no health risk to the general public…In concentrations used in Heatsavr, it is my opinion that the proprietary ingredient would present no health risk to the general public.” Charles A. Lapin, PhD., Toxicology Consultant

Safety Tests

Brentwood Bay Lodge Victoria, BC

Water Temp. 82ºF

Air Temp. 39ºF

Visual Testimonial

Pool Size – 500 SF

1.5 oz. Dosage of Heatsavr

15 minutes in between photos

Can people swim while Heatsavr™ is in use? Yes, Heatsavr™ is tested and proven to be absolutely safe. It's designed to be in use 24 hours per day, which gives Heatsavr™ a distinct advantage over standard pool blankets. Is Heatsavr™ safe for filters and plumbing? Yes, Heatsavr™ is non-corrosive. There is no detrimental effect on pipes, pumps, valves, chlorine controllers, or filters commonly used in pool applications. Is Heatsavr™ environmentally friendly? Yes. Not only does Heatsavr™ biodegrade into safe, simple compounds, but the reduction in energy use is especially beneficial. Swimmers in the pool will not know it is being used.

Frequently Asked Q’s

Resources:

Literature Gallery liquidpoolcovers.com/literature-gallery.htm

Downloadable Content liquidpoolcovers.com/free-guides.htm

Posters & Infographics liquidpoolcovers.com/literature-gallery

Video Library liquidpoolcovers.com/video-library.htm

Is Heatsavr™ easy to use, and how do I apply it? Yes, this product is very easy to use. It can be applied manually or by using the automated metering system (recommended) for a completely automated daily application. How much energy can I expect to save from using Heatsavr™? An average savings of 20% up to 45% can be expected, depending on certain variables pertaining to your pool's operations.

How much Heatsavr™ is needed? The recommended dosage for Heatsavr™ is 1 oz./ 400 sq ft of pool surface area per day.

Frequently Asked Q’s

Thanks for listening!

Contact Flexible Solutions:

Toll Free (800) 661-3560

www.liquidpoolcovers.com