Upload
pedro-siqueira
View
1.462
Download
6
Tags:
Embed Size (px)
DESCRIPTION
Citation preview
Fiber to the Future®
Table of Contents
©2012 The information contained herein is for informational purposes only. Technical claims listed depend on various technical as-
sumptions. Your experience with these products may diff er if you operate the products in an environment which is diff erent from the
technical assumptions. Alphion reserves the right to modify these specifi cations without any prior notice. Alphion makes no warranties,
expressed or implied, on the information contained in this document.
2
About Alphion
AOLT-4000 GPON OLT (ETSI)
AOLT-4000N GPON OLT (ANSI)
AOLT-4000-CTL GPON Control Card
AOLT-4000-SWT GPON Switch and Timing Card
AOLT-4000-GLCP GPON Protected Path Line Card
AONT-1040 GPON ONT (4FE+WiFi)
AONT-100C GPON ONT (4FE+2POTS)
AONT-100 GPON ONT (4FE+2POTS+RF)
AONT-1041 GPON ONT (4FE+2POTS+WiFi)
AONT-1440 GPON ONT (4FE+4POTS)
AONT-1010 GPON ONT (1GE)
AONT-1350 GPON ONT (1GE+2POTS+RF Hardened)
AONT-1356 GPON ONT (1GE+2POTS+RF with Return Path Hardened)
AONT-2301 GPON ONT (1GE+8POTS+2E1/T1 Hardened)
AONT-1308 GPON ONT (2GE+2POTS Hardened)
AONT-1302 GPON ONT (2GE+4POTS Hardened)
AONT-1240 GPON ONT (4GE+2POTS)
AONT-1315 GPON ONT (4GE+2POTS)
AONT-1604 GPON ONT (4GE+2POTS)
AONT-1601 GPON ONT (4GE+2POTS+WiFi)
AONT-3030 GPON MDU (24FE)
AONT-3330 GPON MDU (24FE+24POTS)
AONT-UPS-Family GPON ONT Uninterruptible Power Supply Family
6500 Modulator RF Return Path Modulator
ASPL series GPON Passive Optical Splitters
AEMS Software Alphion Element Management System software
PON.ext™ PON Reach Extension System
ONT Selection Guide
Contact Information
3
4-5
6-7
8
9-10
11
12-13
14-15
16-17
18-19
20-21
22-23
24-25
26-27
28-29
30-31
32-33
34-35
36-37
38-39
40-41
42-43
44-45
46
47-48
49-50
51-52
53-54
55
56
302-1000003 Rev 01
Fiber to the Future® 3
Alphion...enabling the photonic future®
Access Systems
The Alphion access system product line includes the AOLT-4000* GPON Optical Line Terminal, the AONT fam-ily of GPON Optical Network Terminals, PON Extenders, AEMS Element Management System and a wide selec-tion of active and passive hardware components for power and fi ber management, passive splitters, distribu-tion frames and more.
Alphion has created a complete GPON technology platform that not only leverages the most sophisticated industry standards, but is also designed for integration into standards-based OEM platforms and service pro-vider networks.
Alphion is recognized as the leader in developing all-optical PON extension solutions. Alphion’s PON.ext™ technology allows carriers to extend the reach of existing PON network from 20 km to 60 km while also increasing the sub-scriber base by four times
*In this document the AOLT-4000 is used to indicate both the AOLT-4000 and AOLT-4000N.
Fiber to the Future®4
AOLT-4000
AOLT-4000GPON OLT (ETSI)
ApplicationsThe AOLT-4000 is designed for carrier central office or MSO hub environments for enabling cost-effective FTTx services.
Flexible ConfigurationTwo control card slots for 1+1 CTL cards. Two switch and timing slots for 1+1 SWT cards with redundant 10-GbE and 1-GbE Service Node Interfaces (SNI) uplinks. Ten line card slots for 10 GLCP cards.
Data Plane ConnectivityThe AOLT-4000’s data plane consists of redundant 10Gbps connections to each card slot from the two dedicated double-width SWT slots in the shelf.
Control Plane ConnectivityThe AOLT-4000’s control plane consists of redundant 1Gbps connections to each card slot from the two dedicated CTL slots.
Synchronization ConnectionsInputs for redundant BITS/SSU timing interfaces for GPON and TDM synchroniza-tion and outputs for sourcing clocks for external synchronization use.
Switch CapacityDual star redundant architecture with 20 Gbps bandwidth to each card slot and 400 Gbps bandwidth total capacity.
High AvailabilityHigh availability architecture where removal or insertion of any single card does not affect existing connections on other cards. Even in a system with a single CTL card, a failure of the control card does not affect the working traffic. To increase control plane availability, a second mate CTL card can be inserted in the AOLT-4000 chassis, providing 1+1 redundancy for the control plane. Likewise to increase data plane availability, a second mate SWT card can be inserted in the AOLT-4000 chassis, providing 1+1 redundancy for the data and signaling plane.
AEMS or SNMP ManagedWith the CTL card installed, AOLT-4000 is either remotely or locally managed from either Alphion’s Element Management System (AEMS) or with a 3rd party EMS using SNMP or a legacy NMS.
9 RU, ETSI 515 mm hole to hole rack mount, 500 mm apertureRequires front access onlySupports card hot swapRedundant 1+1 controller and 1+1 aggregation switch card options1+1 (from different cards) uplink protection option1:1 (same card) uplink protection option Stable GPON
Complies with ITU-T G.984.x and G.9882.488Gbps downstream and 1.244Gbps upstreamDBA (Dynamic Bandwidth Allocation) and QoS based on 1,024 T-CONTs per PON port128 bit AES encryption and FEC
High performance layer 2 switchingFull throughput for all ports (non-blocking)High capacity packet switching (16K MACs SNI, 32Kx10 MACs GPON (32K/4))Powerful layer 1~ 4 filtering and QoSIGMP snooping/proxy for multicasting
Flexible SNI networking802.3ad LAG and 802.3ad LACP (option)G.8031 linear and G.8032 ring ERPS V1/v2 option (future)
Various interfacesDownlink interface: 4+4 GPONs (SFPs) per GLCPx10Uplink interface: 8 x 1GbE (SFP) and 2 x 10GbE (XFP) per SWT x2
Excellent operation and managementManagement via EMS (SNMPv2c/v3), CLI(Telnet/console) and syslog
SecurityLayer 1~4 packet filtering (ACL)DHCP packet filteringDHCP Option 82MAC restriction per portBroadcast/multicast/DLF packet limitPort flood guard for abnormal trafficLoop detection and blocking
Dual shelf power inputsDual BITS/SSU clock inputsCentral office dry alarm contacts via the control cardIntegrated fiber managementForced air cooling with field replaceable air filter
Feature Summary
Fiber to the Future® 5
AOLT-4000
GPONStandard: ITU-T G.984.1,2,3,4 and G.988 compliantDownstream: 2.488Gbps, 1490nm, Class B+ and C+Upstream: 1.244Gbps, 1310nm, Class B+ and C+Service distance: up to 60km (depending on split ratio and reach extension)Split ratio: up to 64/128T-CONT: 1K per OLT portGEM ports: 4K per OLT portSwitchingTwo-stage layer 2 switching (store and forward)Switching capacity: 200Gbpsx2 Ethernet switchingSwitching performance:
Full throughput for all ports (non-blocking)16K MACs SNI, 32Kx10 MACs GPON (32K/4)4095 VLANs
Layer 2 line rate forwardingMAC-forced forwarding (RFC4562) on SNIMulticasting: IGMP snooping/proxySTP (802.1d), RSTP (802.1w), MSTP (802.1s) (future)802.3ad LAG and LACP (future)DHCP relay with Option 82Security:
Packet filtering (access control list), port flood guardDynamic, Reflexive, TCP intercept time based ACLs (future)MAC address limitation per UNI port
Protection optionG.8031 linear and G.8032 ring ERPS v1/v2QoS8 priority queues per port802.1p, ToS, DSCP marking/remarkingScheduling: SPQ, WRR, DRRSrTcm and TrTcmCongestion control
Head of line blocking preventionBack pressure, 802.3x
ManagementAlphion EMS (SNMPv2c/v3), CLI (Telnet/console), syslog, RMONRemote software upgrade via TFTP and FTPRADIUS, TACACS+ authentication for management accessAlarm contacts (critical, major, minor, audible, visual)802.1ag (CFM, CCM, Linktrace) (future)ITU-T Y.1731 (CFM,AIS, Test, MCC, PMM) (future)NTPv4 (RFC5905) (future)Built-in temperature sensor
SystemSynchronization:
Free run SONET/SDH Minimum Clock (SMC) internal clockRevertive or non-revertive protection switching optionRedundant BITS/SSU 1544/2048 KHz and 1544/2048 Kbps inputsRedundant BITS/SSU 1544/2048 KHz and 1544/2048 Kbps outputs per G.812Automatic holdover (Stratum 3 or 3E local OCXO) on loss of reference inputsG.8262 SyncE (EEC option 1,2) line-timed (future)IEEE1588v2 PTP per G.984.3-Amd 2 (2008) (future)
Capacity:2 slots redundant control cards (CTL)2 slots (double-width) redundant switch and timing cards (SWT)10 slots GPON line cards (GLCP)
BITS/SSU clock:Two inputs 75 ohms BNC and DB9Two outputs 75 ohms BNC and DB9
Management ports:LCT MGT A 10/100Base-TOut-of-band MGT B 10/100Base-TCraft interface USB 2.0 (type B)
Alarm: Five outputs DB15Power supply: -36 to -72 VDC, dual input individually controlled by circuit breakerCooling: Forced air cooling with fansDimensionsW x D x H 537 mm x 300 mm x 400 mmWeight 46lb/17kg (chassis with fan tray) 65lb/30kg (fully loaded)Frame mounting ETSI 515 mm hole to hole, and 500mm apertureOperating environmentTemperature -5 to +50ºCRelative humidity 5% to 90% (non-condensing)ComplianceEMC EN55022, CISPR-22 Class ASafety EN60950, UL60950, CELaser safety IEC-60825-1 Class 1, ITU-T G.664Environmental EN300 019-1-3, QM-333 B2 categoryChassis EN300 119-4Transient EN/IEC61000-4-4 (2001) level 2Immunity Radiant RF EN/IEC61000-4-3 (2002) level 2 Conducted EN/IEC61000-4-6 (2001) level 2Surge EN/IEC61000-4-5 (2001) 0.5 KV (line), 1.5 KV (earth)ESD EN/IEC61000-4-2 (2001) contact level 2, air discharge level 3
SPECIFICATIONS
Fiber to the Future®6
AOLT-4000N
AOLT-4000NGPON OLT (ANSI)
ApplicationsThe AOLT-4000N is designed for carrier central office or MSO hub environments for enabling cost-effective FTTx services.
Flexible ConfigurationTwo control card slots for 1+1 CTL cards. Two switch and timing slots for 1+1 SWT cards with redundant 10-GbE and 1-GbE Service Node Interfaces (SNI) uplinks. Ten line card slots for 10 GLCP cards.
Data Plane ConnectivityThe AOLT-4000N’s data plane consists of redundant 10Gbps connections to each card slot from the two dedicated double-width SWT slots in the shelf.
Control Plane ConnectivityThe AOLT-4000N’s control plane consists of redundant 1Gbps connections to each card slot from the two dedicated CTL slots.
Synchronization ConnectionsInputs for redundant BITS/SSU timing interfaces for GPON and TDM synchroniza-tion and outputs for sourcing clocks for external synchronization use.
Switch CapacityDual star redundant architecture with 20 Gbps bandwidth to each card slot and 400 Gbps bandwidth total capacity.
High AvailabilityHigh availability architecture where removal or insertion of any single card does not affect existing connections on other cards. Even in a system with a single CTL card, a failure of the control card does not affect the working traffic. To increase control plane availability, a second mate CTL card can be inserted in the AOLT-4000N chassis, providing 1+1 redundancy for the control plane. Likewise to increase data plane availability, a second mate SWT card can be inserted in the AOLT-4000N chassis, providing 1+1 redundancy for the data and signaling plane.
AEMS or SNMP ManagedWith the CTL card installed the AOLT-4000N is either remotely or locally managed from either Alphion’s Element Management System (AEMS) or with a 3rd party EMS using SNMP or a legacy NMS.
12RU 19” rack mountRequires front access onlySupports card hot swapRedundant 1+1 controller and 1+1 aggregation switch card options1+1 (from different cards) uplink protection option1:1 (same card) uplink protection option Stable GPON
Complies with ITU-T G.984.x and G.9882.488Gbps downstream and 1.244Gbps upstreamDBA (Dynamic Bandwidth Allocation) and QoS based on 1,024 T-CONTs per PON port128 bit AES encryption and FEC
High performance layer 2 switchingFull throughput for all ports (non-blocking)High capacity packet switching (16K MACs SNI, 32Kx10 MACs GPON (32K/4))Powerful layer 1~ 4 filtering and QoSIGMP snooping/proxy for multicasting
Flexible SNI networking802.3ad LAG and 802.3ad LACP (option)G.8031 linear and G.8032 ring ERPS V1/v2 option (future)
Various interfacesDownlink interface: 4+4 GPONs (SFPs) per GLCPx10Uplink interface: 8 x 1GbE (SFP) and 2 x 10GbE (XFP) per SWT x2
Excellent operation and managementManagement via EMS (SNMPv2c/v3), CLI(Telnet/console) and syslog
SecurityLayer 1~4 packet filtering (ACL)DHCP packet filteringDHCP Option 82MAC restriction per portBroadcast/multicast/DLF packet limitPort flood guard for abnormal trafficLoop detection and blocking
Dual shelf power inputsDual BITS/SSU clock inputsCentral office dry alarm contacts via the control cardIntegrated fiber managementForced air cooling with field replaceable air filter
Feature Summary
Fiber to the Future® 7
AOLT-4000N
GPONStandard: ITU-T G.984.1,2,3,4 and G.988 compliantDownstream: 2.488Gbps, 1490nm, Class B+ and C+Upstream: 1.244Gbps, 1310nm, Class B+ and C+Service distance: up to 60km (depending on split ratio and reach extension)Split ratio: up to 64/128T-CONT: 1K per OLT portGEM ports: 4K per OLT portSwitchingTwo-stage layer 2 switching (store and forward)Switching Capacity: 200Gbpsx2 Ethernet switchingSwitching Performance:
Full throughput for all ports (non-blocking)16K MACs SNI, 32Kx10 MACs GPON (32K/4)4095 VLANs
Layer 2 line rate forwardingMAC-forced forwarding (RFC4562) on SNIMulticasting: IGMP snooping/proxySTP (802.1d), RSTP (802.1w), MSTP (802.1s) (future)802.3ad LAG and LACP (future)DHCP relay with Option 82Security:
Packet filtering (access control list), port flood guardDynamic, Reflexive, TCP intercept time based ACLs (future)MAC address limitation per UNI port
Protection optionG.8031 linear and G.8032 ring ERPS v1/v2QoS8 priority queues per port802.1p, ToS, DSCP marking/remarkingScheduling: SPQ, WRR, DRRSrTcm and TrTcmCongestion control Head of line blocking prevention Back pressure, 802.3xManagementAlphion EMS (SNMPv2c/v3), CLI (Telnet/console), syslog, RMONRemote software upgrade via TFTP and FTPRADIUS, TACACS+ authentication for management accessAlarm contacts (critical, major, minor, audible, visual)802.1ag (CFM, CCM, Linktrace) (future)ITU-T Y.1731 (CFM,AIS, Test, MCC, PMM) (future)NTPv4 (RFC5905) (future)Built-in temperature sensor
SystemSynchronization:
Free run SONET/SDH Minimum Clock (SMC) internal clockRevertive or non-revertive protection switching optionRedundant BITS/SSU 1544/2048 KHz and 1544/2048 Kbps inputsRedundant BITS/SSU 1544/2048 KHz and 1544/2048 Kbps outputsper G.812Automatic holdover (Stratum 3 or 3E local OCXO) on loss of reference inputs G.8262 SyncE (EEC option 1,2) line-timed (future)IEEE1588v2 PTP per G.984.3-Amd 2 (2008) (future)
Capacity:2 slots redundant control cards (CTL)2 slots (double-width) redundant switch and timing cards (SWT)10 slots GPON line cards (GLCP)
BITS/SSU clock:Two inputs 75 ohms BNC and DB9Two outputs 75 ohms BNC and DB9
Management ports:LCT MGT A 10/100Base-TOut-of-band MGT B 10/100Base-TCraft interface USB 2.0 (type B)
Alarm: Five outputs DB15Power supply: -36 to -72 VDC, dual input Individually controlled by circuit breaker Cooling: Forced air cooling with fansDimensionsW x D x H 442 mm x 300 mm x 533 mm 17.4 inch x 11.8 inch x 21.0 inchWeight 46lb/17kg (chassis with fan tray) 65lb/30kg (fully loaded)Frame mounting 19 inch rack mountOperating environmentTemperature -5 to +50ºCRelative humidity 5% to 90% (non-condensing)ComplianceEMC EN55022, CISPR-22 Class ASafety EN60950, UL60950, CELaser safety IEC-60825-1 Class 1, ITU-T G.664Environmental EN300 019-1-3, QM-333 B2 categoryChassis EN300 119-4Transient EN/IEC61000-4-4 (2001) level 2Immunity Radiant RF EN/IEC61000-4-3 (2002) level 2 Conducted EN/IEC61000-4-6 (2001) level 2Surge EN/IEC61000-4-5 (2001) 0.5 KV (line), 1.5 KV (earth)ESD EN/IEC61000-4-2 (2001) contact level 2, air discharge level 3
SPECIFICATIONS
Fiber to the Future®8
AOLT-4000-CTL
AOLT-4000-CTLGPON Control Card
Feature Summary ApplicationsOne or two AOLT-4000-CTL cards, installed at either end of an AOLT-4000 chassis, can be used to control and manage the AOLT-4000 system.
High Performance Control PlaneThe AOLT-4000-CTL card extends a dedicated, out-of-band GbE control plane link, over the backplane, to each slot in the AOLT-4000 chassis. The AOLT-4000-CTL card contains a high-performance embedded CPU that executes the system-level control and management plane software for the AOLT-4000 platform, including system-level resource allocations, critical alarm/event report-ing, etc. The card’s software implements a flexible, low-overhead inter-card communications framework that assists in fast protection switching of the switch/timing and GPON line cards in the AOLT 4000 chassis, or resources in them.
Persistent StorageTwo GBytes of persistent storage are available for configuration data and software images for all the cards in the AOLT-4000 chassis.
High AvailabilityTo increase the control plane availability, a second mate AOLT-4000-CTL card can be inserted in the AOLT-4000 chassis, providing 1+1 redundancy. Failure of the active or standby AOLT-4000-CTL card, or both of them, does not affect the working traffic in the AOLT-4000 chassis. The AOLT-4000-CTL card also ensures high availability for other cards in the system through dedicated hardware level inter-card signaling.
ManagementThe AOLT-4000-CTL supports SNMP based management of all the cards in the AOLT-4000 platform from Alphion’s Element Management System (AEMS). Using a 1Gbps control plane link to AOLT-4000-SWT (the AOLT-4000 platform’s Switch and Timing card), the AOLT-4000-CTL card supports in-band manage-ment of the AOLT-4000 system through one of the network uplink ports of the Switch and Timing card.
1+1 master/slave redundancy option for high availability applications
Fully hot-swappable
Redundant power supply and control plane
Two 10/100Base-T RJ-45 ports for EMS
Front-panel telco alarm cut-off (ACO) button
Front-panel critical, major and minor alarm indicator LEDs
Front-panel LED test button
Front-panel USB2.0 connector for local craft PC
2Gbyte on-board FLASH for software image and configuration data storage
SNMP based management of the AOLT-4000 platform
Fiber to the Future® 9
AOLT-4000-SWT
AOLT-4000-SWTGPON Switch and Timing Card
Feature SummaryHot swappable, with 1+1 master and slave redundancy option
28 Gb/s (2 x 10-GbE and 8x1-GbE) uplink, and 10Gbps backplane interface to each line card
Line speed switching
Flexible SNI interface types
Strong security
Comprehensive QoS
Various synchronization options
ApplicationsAs a key card of the AOLT-4000 platform, AOLT-4000-SWT enables efficient and controlled forwarding of Ethernet/packet traffic between the GPON lines cards and the uplink service/edge node (typically, a router or a switch).
Robust Layer-2 SwitchingAOLT-4000-SWT contains a high-capacity switching engine that supports hardware based learning of up to 16K MAC addresses, 4094 VLANs, and Independent VLAN Learning (IVL) based forwarding. It also supports MAC, protocol and subnet based VLANs; IEEE 802.1ad/Q-in-Q VLAN stacking; and IEEE 802.3ad link aggregation. Featuring an aggregate switching capacity of 200 Gbps, the AOLT-4000-SWT supports line-rate forwarding of unicast and multicast packets, for all packet sizes, under all conditions.
Packet Filtering/ClassificationAOLT-4000-SWT includes a flexible packet filter/classifier that can filter packets based on any layer 2 to 7 field, including MAC address, IP address, VLAN ID, packet type, etc, supporting multiple lookups and actions per packet. Filter actions include dropping, priority re-marking, rate limiting, etc. The AOLT-4000-SWT card also supports access control list (ACL) based policing; flow metering, with a granularity of 64 kbps to 1 Gbps; two rate three color marking (trTCM); and class-based marking for SLAs.
Intelligent QoSAOLT-4000-SWT supports 8 priority queues per port, head of line blocking prevention, service aware flow control, bandwidth guarantee per class of service and/or per port, DSCP re-marking, DSCP to 802.1p mapping, and 2 levels of drop precedence per queue. It features a packet scheduler that supports multiple scheduling algorithms, including strict priority (SP), weighted round robin (WRR), and deficit round robin (DRR). The AOLT-4000-SWT also supports individual rate limiting of broadcast, unknown unicast, and multicast traffic on a per port basis.
Fiber to the Future®10
AOLT-4000-SWT
SwitchingFull throughput for all ports (non-blocking)High capacity packet switching (16K MACs and 4,095 VLANs)STP (802.1d), RSTP (802.1w), MSTP (802.1s) (future)Full throughput layer 2 line rate forwarding for all ports (non-blocking)MAC-forced forwarding (RFC4562) on SNIPowerful layer 1~ 4 filtering and QoSMulticasting: IGMP snooping/proxy, 1,024 layer 2 multicast groupsLine-rate unicast packet forwarding and multicast replicationPort based VLAN,802.1Q VLAN, IEEE 802.1ad Q-in-Q VLAN stackingIndependent VLAN learning (IVL)DHCP relay with Option 82Flexible SNI networking802.3ad LAG and 802.3ad LACP (option)G.8031 linear and G.8032 ring ERPS v1/v2 option (future)SNI interface types: 8 x 1GbE (SFP) and 2 x 10GbE (XFP)SecurityLayer 1~4 packet filtering via access control lists (ACL)Dynamic, reflexive, TCP intercept time based ACLs (future)MAC address limiting per portDHCP packet filteringDHCP Option 82MAC restriction per portBroadcast/multicast/DLF packet limitPort flood guard for abnormal trafficLoop detection and blockingQoS8 priority queues per port802.1p, ToS, DSCP marking/remarkingScheduling: SP, WRR, DRRSrTcm and TrTcmCongestion Control: Head of line blocking prevention Back pressure (802.3x) Rate control of broadcast, unknown unicast, multicast packets
SynchronizationFree run SONET/SDH Minimum Clock (SMC) internal clockRevertive or Non-revertive protection Switching OptionRedundant BITS/SSU 1544/2048 KHz and 1544/2048 Kbps inputsRedundant BITS/SSU 1544/2048 KHz and 1544/2048 Kbps outputs per G.812Automatic holdover (Stratum 3 or 3E local OCXO) on loss of reference inputsPower supply-36 to -72 VDC, dual input Operating environmentTemperature -5 to +50ºCRelative humidity 5% to 90% (non-condensing)ComplianceEMC EN55022, CISPR-22 Class ASafety EN60950, UL60950, CELaser safety IEC-60825-1 Class 1, ITU-T G.664Chassis EN300 119-4Transient EN/IEC61000-4-4 (2001) level 2Immunity Radiant RF EN/IEC61000-4-3 (2002) level 2 Conducted EN/IEC61000-4-6 (2001) level 2Surge EN/IEC61000-4-5 (2001) 0.5 KV (line), 1.5 KV (earth)ESD EN/IEC61000-4-2 (2001) contact level 2, air discharge level 3
SPECIFICATIONS
Fiber to the Future® 11
AOLT-4000-GLCP
ApplicationsThe AOLT-4000-GLCP card provides the GPON interface with path protection for the AOLT-4000 system.
GPONThe AOLT-4000-GLCP card is a fully FSAN and ITU-T G.984 compliant GPON system, with support for a data rate of 2.488 Gb/s in the downstream and 1.244 Gb/s in the upstream direction and support for the Class B+ and Class C+ optical link budget based on the SFP installed on each GPON port. In addition, in accordance with G.984, the AOLT-4000-GLCP card supports AES (128-bit key) in the downstream direction and RS(255,239) FEC in both downstream and upstream directions.
Back Plane ConnectivityThe AOLT-4000-GLCP provides redundant 10 Gbps data plane connections to both the active and standby Switch and Timing cards (AOLT-4000-SWT) in the AOLT-4000 chassis. In addition, the GLCP also provides a redundant 1 Gbps control plane connectivity to each of the two Control Cards (AOLT-4000-CTL) in the AOLT-4000 Chassis.
High PerformanceThe GLCP card incorporates a high performance full-wire-speed QoS enabled L2 switch that supports MAC learning and filtering, 802.1Q VLANs, 802.1ad Q-in-Q VLAN stacking with single and dual VLAN tag manipulation, and QoS (802.1p and DSCP to 802.1p mapping). The GLCP also supports IGMP snoop-ing and DHCP relay agent with Option 82 support for line identification.
GPON ProtectionThe GLCP supports a 1:1 GPON path protection with the optional redundant ports populated with the appropriate transceivers.
GPON DBAThe GLCP provides support for both NSR and SR DBA (ITU-T G.984.3), piggy-back DBRu report mode 0, including concurrent support for DBR mode 0 and “idle GEM” mode. The GLCP supports all the T-CONT types (Type 1 through Type 5). It supports up to 1,024 T-CONTs per PON port, 4,096 T-CONTs per card and up to 256 allocations (alloc-ids) in BW MAP
AOLT-4000-GLCPGPON Protected Path Line Card
4 GPON active ports per card
4 optional protection ports per card
1:1 protectable when installed in an AOLT-4000 chassis
Hot swappable cards
Dual 10 Gbps interface to the backplane for data-plane redundancy
Dual 1 Gbps interface to the backplane for control-plane redundancy
On-board L2 switch with intelligent QoS & multicast support
8K MAC addresses per PON port and 32K MAC addresses per card
4,095 VLANs
T-CONT types 1 to 5 support
1,024 T-CONTs per PON port and 4,096 T-CONTs per card
256 allocations in BW MAP
Feature Summary
Fiber to the Future®12
AONT-1040
AONT-1040
GPON ONT (4FE+WiFi)
Feature SummaryIndoor wall or table mount
Four 10/100Base-T Ethernet RJ-45 Ports
802.11b/g/n wireless interface
Built-in L3 routing gateway with NAT/NAPT and Firewall
Built-in L2 wire-speed switch, 256 MAC addresses and 16 VLAN VIDs
MAC address limiting
Customer VID (VLAN ID) tagged (802.1Q), priority tagged (802.1p) and untagged frames, stacked VLAN (Q-in-Q)
ToS/DSCP to 802.1p mapping
IGMPv1/v2/v3 snooping and filtering
Ethernet UNI output shaping, and upstream scheduling
GPON “dying gasp” power loss indica-tion
ApplicationsThe AONT-1040 has been optimized for single family homes or apartments and small office home offices (SOHO) or small businesses.
High Bandwidth GPONThe AONT-1040 is fully FSAN (ITU-T G.984) compliant with a 1.244 Gbps upstream and 2.488 Gbps downstream, Class B+ GPON system. In addition, it supports downstream AES (128-bit key) and downstream and/or upstream FEC RS(255,239).
Ethernet Quality of ServiceThe AONT-1040 has extensive Ethernet QoS features, including 802.3x flow control, DSCP to 802.1p mapping, upstream congestion control, and down-stream traffic scheduling for premium or time sensitive content. Intelligent and robust buffer and queue management for Ethernet traffic, with individual priori-tizable queues, ensures that tiered residential service offerings based on differ-ent bit-rates and QoS can be supported.
GatewayThe AONT-1040 contains both a built-in wire-speed L2 802.1Q VLAN switch and a built-in L3 routing gateway with port forwarding, NAT and NAPT address trans-lation, built-in PPPoE support for high speed Internet service, and an integrated stateful packet inspection firewall with configurable access control list (ACL) and application-level gateway (ALG). Support for VPN (L2TP, PPTP and IPSec) pass through is also provided. As part of the gateway function there is a DHCP client and server, and a DNS server.
SecurityThe AONT-1040 comes with the latest security features, including MAC address spoofing protection, MAC/IP address port binding, MAC/IP address limiting on a per port basis, per-port access control list (ACL) based on port, MAC address and Ether-type, DOS prevention, WEP, and WPA/WPA2.
Flexible ManagementThe AONT-1040 is managed from the AOLT-4000 OLT over the GPON’s OMCI channel. The AOLT in turn is managed with either Alphion’s Element Manage-ment System (AEMS) that provides configuration, profile based provisioning, event and fault management and performance monitoring for the AONT, or with a 3rd party EMS using SNMP or a legacy NMS.
Fiber to the Future® 13
AONT-1040
Optical InterfaceStandard Fully ITU-T G.984 compliantLink budget 28 dB (Class B+)Wavelength Upstream: 1310 nm Downstream: 1490 nmLine rate Upstream: 1.244 Gbps; Downstream: 2.488 GbpsOutput power +0.5 to +5.0 dBm Sensitivity -27 dBm (at 10 dB extinction ratio)Overload -8 dBmDistance up to 60 km (depending on split ratio and reach extension)Connector SC/APC
GPON TC LayerAES 128-bit keyFEC RS(255,239)DBA DBRu mode 0GEM port Up to 32T-CONT/AllocID Up to 8
Data InterfaceType (wired) Four 10/100Base-T RJ-45 Ethernet interfacesType (wireless) 802.11b/g/n, dual antennaWiFi security WEP, WPA-PSK, MAC address filteringEthernet rate & duplex Auto-negotiationMDI/MDIX Auto-sensingVLAN support 16 VLANs, untagged VLAN, 802.1Q tagged VLAN, VLAN stacking (Q-in-Q), VLAN translationMAC table 256 MAC addressesMulticast 128 multicast groups , IGMP V2/V3 snooping/proxySecurity broadcast/multicast rate limiting, MAC address limiting QoS CoS based on VID, 802.1p, and IP ToS/DSCP, and IP VID=0 802.1p, ToS/DSCP to 802.1p mapping, 802.1p marking/remarking
EnvironmentalTemperature 0 to 40 ºC Humidity 10 to 90% (non-condensing)
GatewayRouting L3 software configurableAddress assignment PPPoE, DHCP or staticAddress translation NAT/NAPT and STP firewall with ACL and ALG (application-level gateway)Services DHCP client and server, DNS, VPN (PPTP, L2TP, IPSec) pass-through, port forwarding
PhysicalW x D x H 223 mm x 161 mm x 44 mmPowering External AC adapter with 12VDC/1.0A DC connectionMounting Wall and table mountingLEDs PWR, ALM, GPON, WiFi, WPS, LAN 1-4
ComplianceEMC EN55022, CISPR-22 Class B, ETSI 300 386, TEC SD/EMI-01/02 Sept. 2001Safety EN60950, UL60950, CE Laser Safety IEC-60825-1 Class 1 laser safety per ITU-T G.664, FDA 21 CFR 1040.10 & 1040.11 Class 1Transient EN/IEC61000-4-4 (2001) level 2Radiant RF Immunity EN/IEC61000-4-3 (2002) level 2Conducted Immunity EN/IEC61000-4-6 (2001) level 2Surge EN/IEC61000-4-5 (2001) 0.5 KV (line) and 1.5 KV (earth)ESD EN/IEC61000-4-2 (2001) contact level 2 & air discharge level 3
SPECIFICATIONS
Fiber to the Future®14
AONT-100C
Feature Summary
AONT-100C
GPON ONT (4FE+2POTS)
ApplicationsThe AONT-100C has been optimized for single family homes or apartments and small office home offices (SOHO) that do not require an RF-overlay for video deliv-ery.
High Bandwidth GPONThe AONT-100C is fully FSAN (ITU-T G.984) compliant with a 1.244 Gbps upstream and 2.488 Gbps downstream, Class B+ GPON system. In addition, it supports downstream AES (128-bit key) and downstream and upstream FEC RS(255,239).
Ethernet Quality of ServiceThe AONT-100C has extensive Ethernet QoS features, including 802.3x flow control, DSCP to 802.1p mapping, upstream congestion control, and down-stream traffic scheduling for premium or time sensitive content. Intelligent and robust buffer and queue management for Ethernet traffic, with individual prioritizable queues, ensures that tiered residential service offerings based on different bit-rates and QoS can be supported.
SecurityThe AONT-100C comes with the latest security features, including MAC address spoofing protection, MAC/IP address port binding, MAC/IP address limiting on a per port basis, local port-to-port switching blocking option, 802.1X MAC-based authentication, per-port access control list (ACL) based on port, MAC address and Ether-type, and DOS prevention.
Small form-factorA space conscious package for simplified wall or table mounting.
Flexible ManagementThe AONT-100C is managed from the AOLT-4000 OLT over the GPON’s OMCI channel. The AOLT in turn is managed with either Alphion’s Element Manage-ment System (AEMS) that provides configuration, profile based provisioning, event and fault management and performance monitoring for the AONT, or with a 3rd party EMS using SNMP or a legacy NMS.
Small-form factor
Indoor wall or table mount
Four 10/100Base-T Ethernet RJ-45 ports
2 analog 2-wire RJ-11 (POTS) VoIP SIP voice ports, G.711 codec, 5 REN per port
CLASS voice services
Lifeline POTS when used with the AONT-UPS and power shedding
Built-in L2 switch , 256 MAC addresses and 16 VLAN VIDs
MAC address limiting
Customer VLAN tagged (802.1p), prior-ity tagged and untagged frames
ToS/DSCP to 802.1p mapping
IGMPv1/v2/v3 snooping and filtering
Ethernet UNI output shaping, and upstream scheduling
GPON “last gasp” power loss indication
Fiber to the Future® 15
AONT-100C
Optical InterfacesStandard Fully ITU-T G.984 compliantLink Budget 28 dB (Class B+)Wavelength Upstream: 1310 nm Downstream: 1490 nmLine rate Upstream: 1.244 Gbps Downstream: 2.488 GbpsOutput power +0.5 to +5.0 dBmSensitivity* -27 dBm (at 10 dB extinction ratio)Overload -8 dBmDistance up to 60 km (depending on split ratio and reach extension)Connector SC/UPC
GPON TC LayerAES 128-bit keyFEC RS(255,239)DBA DBRu mode 0GEM port Up to 32T-CONT/AllocID Up to 8
Video InterfacesType Not applicable, IP Video over the Data Interfaces
Data InterfacesType Four 10/100Base-T RJ-45 Ethernet interfacesRate & duplex Auto-negotiationMDI/MDIX Auto-sensingVLAN support 802.1Q with VLAN tag manipula tionMAC & VLAN table 256 MAC addresses and 16 VLAN IDsPriority VLAN 802.1p, VID=0 802.1p, ToS/DSCP to 802.1p mapping
Voice InterfaceType Two FXS POTS RJ-11 interfaces, 5 REN, balanced ringVoIP Protocol SIP (RFC3261) and SDP (RFC2327)Codec Multiple codec supportDTMF RFC2833 or in-bandTones and Ring ConfigurableDial Plan ConfigurableFAX and Modem G.711 for FAX/mode in TTY or T.38 FAXCLASS Services Yes, variousConditioning Echo cancellation, voice activity detection, comfort noise gener- alization
EnvironmentalTemperature -5 to +50ºCRelative humidity 5% to 95% (non-condensing)
PhysicalW x D x H 140 mm x 180 mm x 40 mmPowering +12 VDCMounting Wall and table mountingLEDS POWER, FIBER, DATA, UPDATE, TEST, PHONE
ComplianceEMC EN55022, CISPR-22 Class B, ETSI 300 386, TEC SD/EMI-01/02 Sept. 2001Safety EN60950, UL60950, CE Laser Safety IEC-60825-1 Class 1 laser safety per ITU-T G.664, FDA 21 CFR 1040.10 & 1040.11 Class 1Transient EN/IEC61000-4-4 (2001) level 2Radiant RF Immunity EN/IEC61000-4-3 (2002) level 2Conducted Immunity EN/IEC61000-4-6 (2001) level 2Surge EN/IEC61000-4-5 (2001) 0.5 KV (line) and 1.5 KV (earth)ESD EN/IEC61000-4-2 (2001) contact level 2 & air discharge level 3
SPECIFICATIONS
Fiber to the Future®16
AONT-100
AONT-100GPON ONT (4FE+2POTS+RF)
Feature Summary ApplicationsThe AONT-100 has been optimized for single family homes or apartments and small office home office (SOHO) that require an RF-overlay for video delivery.
High Bandwidth GPONThe AONT-100 is fully FSAN (ITU-T G.984) compliant with a 1.244 Gbps upstream and 2.488 Gbps downstream, Class B+ GPON system. In addition it supports downstream AES (128-bit key) and downstream and upstream FEC RS(255,239).
Ethernet Quality of ServiceThe AONT-100 has extensive Ethernet QoS features, including 802.3x flow control, DSCP to 802.1p mapping, upstream congestion control, and down-stream traffic scheduling for premium or time sensitive content. Intelligent and robust buffer and queue management for Ethernet traffic, with individual prioritizable queues, ensures that tiered residential service offerings based on different bit-rates and QoS can be supported.
SecurityThe AONT-100 comes with the latest security features, including MAC address spoofing protection, MAC/IP address port binding, MAC/IP address limiting on a per port basis, local port-to-port switching blocking option, 802.1X MAC-based authentication, per-port access control list (ACL) based on port, MAC address and Ether-type, and DOS prevention.
Flexible ManagementThe AONT-100 is managed from the AOLT-4000 OLT over the GPON’s OMCI channel. The AOLT in turn is managed with either Alphion’s Element Manage-ment System (AEMS) that provides configuration, profile based provisioning, event and fault management and performance monitoring for the AONT, or a 3rd party EMS using SNMP or a legacy NMS.
Built-in triplexer for video RF-overlay
Indoor wall or table mount
Four 10/100Base-T Ethernet RJ-45 ports
2 analog 2-wire RJ-11 (POTS) VoIP SIP voice ports, G.711 codec, 5 REN per port
CLASS 5 voice services
Lifeline POTS when used with the AONT-UPS
Built-in L2 switch , 256 MAC addresses and 16 VLAN VIDs
MAC address limiting
Customer VLAN tagged (802.1p), prior-ity tagged and untagged frames
ToS/DSCP to 802.1pmapping
IGMPv1/v2/v3 snooping and filtering
Ethernet UNI output shaping, and upstream scheduling
GPON “dying gasp” power loss indica-tion
Fiber to the Future® 17
AONT-100
Voice InterfacesType Two FXS POTS RJ-11 interfaces, 5 REN, balanced ringVoIP Protocol SIP (RFC3261) and SDP (RFC2327)Codec Multiple codec supportDTMF RFC2833 or in-bandTones and Ring ConfigurableDial Plan ConfigurableFAX and Modem G.711 for FAX/mode in TTY or T.38 FAXCLASS Services Yes, variousConditioning Echo cancellation, voice activity detection, comfort noise gener- alization
EnvironmentalTemperature -5 to +50ºCHumidity 5% to 95% (non-condensing)
PhysicalW x D x H 330 mm x 254 mm x 102 mmPowering +12 VDCMounting Wall and table mountingLEDs POWER, TEST, FIBER, TV, DATA, PHONE
ComplianceEMC EN55022, CISPR-22 Class B, ETSI 300 386, TEC SD/EMI-01/02 Sept. 2001Safety EN60950, UL60950, CE Laser Safety IEC-60825-1 Class 1 laser safety per ITU-T G.664, FDA 21 CFR 1040.10 & 1040.11 Class 1Transient EN/IEC61000-4-4 (2001) level 2Radiant RF Immunity EN/IEC61000-4-3 (2002) level 2Conducted Immunity EN/IEC61000-4-6 (2001) level 2Surge EN/IEC61000-4-5 (2001) 0.5 KV (line) and 1.5 KV (earth)ESD EN/IEC61000-4-2 (2001) contact level 2 & air discharge level 3
Optical InterfaceStandard Fully ITU-T G.984 compliantLink Budget 28 dB (Class B+)Wavelength Upstream: 1310 nm; Downstream: 1490 nmLine Rate Upstream: 1.244 Gb/s; Down- stream: 2.488 Gb/sOutput power +0.5 to +5.0 dBmSensitivity* -27 dBm (at 10 dB extinction ratio)Overload -8 dBmDistance up to 60 km (depending on split ratio and reach extension)Connector SC/APC (required for RF-overlay)
GPON TC LayerAES 128-bit keyFEC RS(255,239)DBA DBRu mode 0GEM port Up to 32T-CONT/AllocID Up to 8
Video InterfacesType Coax F-connector
Data InterfacesType Four 10/100Base-T RJ-45 Ethernet interfacesRate & Duplex Auto-negotiationMDI/MDIX Auto-sensingVLAN Support 802.1Q with VLAN tag manipulat- ionMAC & VLAN table 256 MAC addresses and 16 VLAN IDsPriority VLAN 802.1p, VID=0 802.1p, ToS/DSCP to 802.1p mapping
SPECIFICATIONS
Fiber to the Future®18
AONT-1041
AONT-1041GPON ONT (4FE+2POTS+WiFi)
Feature SummaryIndoor wall or table mount
Four 10/100Base-T Ethernet RJ-45 Ports
2 analog 2-wire RJ-11 (POTS) VoIP SIP voice ports, G.711 codec, 5 REN per port
CLASS Voice Services
802.11b/g/n wireless interface
Built-in L3 routing gateway with NAT/NAPT and firewall
Built-in L2 wire-speed switch , 128/256 MAC addresses and 16/32 VLAN VIDs
MAC address limiting
Customer VID (VLAN ID) tagged (802.1Q), priority tagged (802.1p) and untagged frames, stacked VLAN (Q-in-Q)
ToS/DSCP to 802.1p mapping
IGMPv1/v2/v3 snooping and filtering
Ethernet UNI output shaping, and upstream scheduling
GPON “dying gasp” power loss indica-tion
ApplicationsThe AONT-1040 has been optimized for single family homes or apartments and small home offices (SOHO) or small businesses.
High Bandwidth GPONThe AONT-1041 is fully FSAN (ITU-T G.984) compliant with a 1.244 Gbps upstream and 2.488 Gbps downstream, Class B+ GPON system. In addition, it supports downstream AES (128-bit key) and downstream and/or upstream FEC RS(255,239).
Ethernet Quality of ServiceThe AONT-1041 has extensive Ethernet QoS features, including 802.3x flow control, DSCP to 802.1p mapping, upstream congestion control, and down-stream traffic scheduling for premium or time sensitive content. Intelligent and robust buffer and queue management for Ethernet traffic, with individual priori-tizable queues, ensures that tiered residential service offerings based on differ-ent bit-rates and QoS can be supported.
GatewayThe AONT-1041 contains both a built-in wire-speed L2 802.1Q VLAN switch and a built-in L3 routing gateway with port forwarding, NAT and NAPT address trans-lation, built-in PPPoE support for high speed Internet service, and an integrated stateful packet inspection firewall with configurable access control list (ACL) and application-level gateway (ALG). Support for VPN (L2TP, PPTP and IPSec) pass through is also provided. As part of the gateway function there is a DHCP client and server, and a DNS server.
SecurityThe AONT-1041 comes with the latest security features, including MAC address spoofing protection, MAC/IP address port binding, MAC/IP address limiting on a per port basis, per-port access control list (ACL) based on port, MAC address and Ether-type, DOS prevention, WEP, and WPA/WPA2.
Flexible ManagementThe AONT-1041 is managed from the AOLT-4000 OLT over the GPON’s OMCI channel. The AOLT in turn is managed with either Alphion’s Element Manage-ment System (AEMS) that provides configuration, profile based provisioning, event and fault management and performance monitoring for the AONT, or with a 3rd party EMS using SNMP or a legacy NMS.
Fiber to the Future® 19
AONT-1041
Optical InterfaceStandard Fully ITU-T G.984 compliantLink Budget 28 dB (Class B+)Wavelength Upstream: 1310 nm Downstream: 1490 nmLine rate Upstream: 1.244 Gbps Downstream: 2.488 GbpsOutput power +0.5 to +5.0 dBm Sensitivity -27 dBm (at 10 dB extinction ratio)Overload -8 dBmDistance up to 60 km (depending on split ratio and reach extension)Connector SC/APC
GPON TC LayerAES 128-bit keyFEC RS(255,239)DBA DBRu mode 0GEM port Up to 32T-CONT/AllocID Up to 8
Data InterfaceTType (wired) Four 10/100Base-T RJ-45 Ethernet interfacesType (wireless) 802.11b/g/n, dual antennaWiFi security WEP, WPA-PSK, MAC address filteringEthernet rate & duplex Auto-negotiationMDI/MDIX Auto-sensingVLAN support 16 VLANs, untagged VLAN, 802.1Q tagged VLAN, VLAN stacking (Q-in-Q), VLAN translationMAC table 256 MAC addressesMulticast 128 multicast groups , IGMP V2/V3 snooping/proxySecurity broadcast/multicast rate limiting, MAC address limiting QoS CoS based on VID, 802.1p, and IP ToS/DSCP, and IP VID=0 802.1p, ToS/DSCP to 802.1p mapping, 802.1p marking/remarkingVoice InterfaceType Two FXS POTS RJ-11 interfaces, 5 REN, balanced ringVoIP protocol SIP (RFC3261) and SDP (RFC2327)Codec Multiple codec supportDTMF RFC2833 or in-bandTones and ring ConfigurableDial plan ConfigurableFAX and Modem G.711 for FAX/mode in TTY or T.38 FAXCLASS services Yes, variousConditioning Echo cancellation, voice activity detection, comfort noise genera tionJitter Buffer static or dynamic
EnvironmentalTemperature 0 to 40 ºC Humidity 10 to 90% (non-condensing)
GatewayRouting L3 software configurableAddress Assignment PPPoE, DHCP or StaticAddress Translation NAT/NAPT and STP firewall with ACL and ALG (application-level gateway)Services DHCP client and server, DNS, VPN (PPTP, L2TP, IPSec) pass-through, port forwarding
PhysicalW x D x H 223 mm x 161 mm x 44 mmPowering External AC adapter with 12VDC/1.0A DC connectionMounting Wall and table mountingLEDs PWR, ALM, GPON, WiFi, WPS, Line 1-2, LAN 1-4
ComplianceEMC EN55022, CISPR-22 Class B, ETSI 300 386, TEC SD/EMI-01/02 Sept. 2001Safety EN60950, UL60950, CE Laser Safety IEC-60825-1 Class 1 laser safety per ITU-T G.664, FDA 21 CFR 1040.10 & 1040.11 Class 1Transient EN/IEC61000-4-4 (2001) level 2Radiant RF Immunity EN/IEC61000-4-3 (2002) level 2Conducted Immunity EN/IEC61000-4-6 (2001) level 2Surge EN/IEC61000-4-5 (2001) 0.5 KV (line) and 1.5 KV (earth)ESD EN/IEC61000-4-2 (2001) contact level 2 & air discharge level 3
SPECIFICATIONS
Fiber to the Future®20
AONT-1440
Feature Summary
AONT-1440GPON ONT (4FE+4POTS)
ApplicationsThe AONT-1440 is a compact GPON ONT that can be used to provide Voice and Data services to single family homes, apartment blocks or small and home offices (SOHO).
High Bandwidth GPONThe AONT-1440 is fully FSAN (ITU-T G.984) compliant with a 1.244 Gbps upstream and 2.488 Gbps downstream, Class B+ GPON system. In addition, it supports downstream AES (128-bit key) and downstream and upstream FEC RS(255,239).
Ethernet Quality of ServiceThe AONT-1440 has extensive Ethernet QoS features, including 802.3x flow control, DSCP to 802.1p mapping, upstream congestion control, and down-stream traffic scheduling for premium or time sensitive content. Intelligent and robust buffer and queue management for Ethernet traffic, with individual prioritizable queues, ensures that tiered residential service offerings based on different bit-rates and QoS can be supported.
SecurityThe AONT-1440 comes with the latest security features, including MAC address spoofing protection, MAC/IP address port binding, MAC/IP address limiting on a per port basis, local port-to-port switching blocking option, 802.1X MAC-based authentication, per-port access control list (ACL) based on port, MAC address and Ether-type, and DOS prevention.
Flexible ManagementThe AONT-1440 is managed from the AOLT-4000 OLT over the GPON’s OMCI channel. The AOLT in turn is managed with either Alphion’s Element Manage-ment System (AEMS) that provides configuration, profile based provisioning, event and fault management and performance monitoring for the AONT, or with a 3rd party EMS using SNMP or a legacy NMS.
Indoor wall or table mount
Four 10/100Base-T Ethernet RJ-45 ports with auto-negotiation
Four analog 2-wire RJ-11 (POTS) VoIP SIP voice ports, G.711 codec, 5 REN per port
CLASS 5 voice services
Built-in L2 switch , 256 MAC addresses and 16 VLAN VIDs
MAC address limiting
Customer VLAN tagged (802.1p), prior-ity tagged and untagged frames
ToS/DSCP to 802.1p mapping
IGMPv1/v2/v3 snooping and filtering
Ethernet UNI output shaping, and upstream scheduling
GPON “dying gasp” power loss indica-tion
Fiber to the Future® 21
AONT-1440
Optical InterfacesStandard Fully ITU-T G.984 compliantLink Budget 28 dB (Class B+)Wavelength Upstream: 1310 nm Downstream: 1490 nmLine rate Upstream: 1.244 Gbps Downstream: 2.488 GbpsOutput power +0.5 to +5.0 dBmSensitivity* -27 dBm (at 10 dB extinction ratio)Overload -8 dBmDistance up to 60 km (depending on split ratio and reach extension)Connector SC/APC
GPON TC LayerAES 128-bit keyFEC RS(255,239)DBA DBRu mode 0GEM port Up to 32T-CONT/AllocID Up to 8
Data InterfacesType Four 10/100Base-T RJ-45 Ethernet interfacesRate & Duplex Auto-negotiationMDI/MDIX Auto-sensingVLAN Support 802.1Q with VLAN tag manipula tionMAC & VLAN Table 256 MAC addresses and 16 VLAN IDsPriority VLAN 802.1p, VID=0 802.1p, ToS/DSCP to 802.1p mapping
Voice InterfaceType Two FXS POTS RJ-11 interfaces, 5 REN, balanced ringVoIP Protocol SIP (RFC3261) and SDP (RFC2327)Codec Multiple codec supportDTMF RFC2833 or in-bandTones and Ring ConfigurableDial Plan ConfigurableFAX and Modem G.711 for FAX/mode in TTY or T.38 FAXCLASS Services Yes, variousConditioning Echo cancellation, voice activity detection, comfort noise gener- alizationEnvironmentalTemperature 0 to +50ºCRelative humidity 5% to 95% (non-condensing)
PhysicalH x W x D 130 mm x 195 mm x 35 mmWeight 0.5kg (excluding AC power adapter)Powering +12 VDC feed via external AC/DC adapterMounting Wall and table mountingLEDs POWER, OPTICAL, LAN, UPDATE, ALARM, POTS
ComplianceEMC EN55022, CISPR-22 Class B, ETSI 300 386, TEC SD/EMI-01/02 Sept. 2001Safety EN60950, UL60950, CE, Optical IEC-60825-1 Class 1 Laser safety per G.664Transient EN/IEC61000-4-4 (2001) level 2Radiant RF Immunity EN/IEC61000-4-3 (2002) level 2Conductive Immunity EN/IEC61000-4-6 (2001) level 2Surge EN/IEC61000-4-5 (2001) 0.5KV (line) and 1.5KV (earth)ESD EN/IEC61000-4-2 (2001) contact level 2 and air discharge level 3
SPECIFICATIONS
Fiber to the Future®22
AONT-1010
AONT-1010GPON ONT (1GE)
Feature SummaryApplicationsThe AONT-1010 is a compact GPON ONT designed and optimized to provide triple play services for a single family residence. The AONT-1010 has one 10/100/1000 BaseT port that can be used to provide high speed data, voice and video services. The AONT-1010 supports a wire speed data interface that supports advanced L2 and VLAN features for providing rate and priority controlled high speed Internet access. To enable VoIP access, the AONT-1010 supports interfacing external IAD box or home router with voice capability through the Ethernet interface. AONT-1010 supports video contents delivered in the form of data (by multicast or unicast).
High Bandwidth GPONThe AONT-1010 is fully FSAN (ITU-T G.984) compliant with a 1.244 Gbps upstream and 2.488 Gbps downstream, Class B+ GPON system. In addition, it supports downstream AES (128-bit key) and downstream and upstream FEC RS(255,239).
Ethernet Quality of ServiceThe AONT-1010 has extensive Ethernet QoS features, including 802.3x flow control, DSCP to 802.1p mapping, upstream congestion control, and down-stream traffic scheduling for premium or time sensitive content. Intelligent and robust buffer and queue management for Ethernet traffic, with individual prioritizable queues, ensures that tiered residential service offerings based on different bit-rates and QoS can be supported.
SecurityThe AONT-1010 comes with the latest security features, including MAC address spoofing protection, MAC/IP address port binding, MAC/IP address limiting on a per port basis, access control list (ACL) based on port, MAC address and Ether-type, and DOS prevention.
Small form-factorA space conscious package for simplified wall or table mounting.
Flexible ManagementThe AONT-1010 is managed from the AOLT-4000 OLT over the GPON’s OMCI channel. The AOLT in turn is managed with either Alphion’s Element Manage-ment System (AEMS) that provides configuration, profile based provisioning, event and fault management and performance monitoring for the AONT, or with a 3rd party EMS using SNMP or a legacy NMS.
Small-form factor
Indoor wall or table mount
One 10/100/1000 Base-T Ethernet RJ-45 Ports
Built-in L2 Switch
Advanced VLAN features
128 MAC addresses and 16 VLAN groups
MAC address limiting
Priority and rate controlled scheduling
ToS/DSCP to 802.1p mapping
GPON “dying gasp” support
Fiber to the Future® 23
AONT-1010
Optical InterfacesStandard Fully ITU-T G.984 compliantLink Budget 28 dB (Class B+)Wavelength Upstream: 1310 nm Downstream: 1490 nmLine rate Upstream: 1.244 Gbps Downstream: 2.488 GbpsOutput power +0.5 to +5.0 dBmSensitivity -27 dBm (at 10 dB extinction ratio)Overload -8 dBmConnector SC/APC
GPON TC LayerAES 128-bit keyFEC RS(255,239)DBA DBRu mode 0GEM port Up to 32T-CONT/AllocID Up to 8
Data InterfaceType One 10/100/1000 Base-T RJ-45 Ethernet interfaceRate & Duplex Auto-negotiationMDI/MDIX Auto-sensingVLAN Support 802.1Q with VLAN tag manipula- tionMAC & VLAN Table 128 MAC addresses and 16 VLAN IDsPriority 802.1p, IP ToS/DSCP to 802.1p mapping
EnvironmentalTemperature -5 to +50ºCRelative humidity 5% to 95% (non-condensing)
PhysicalH x W x D 130 mm x 100 mm x 33 mmWeight 0.2kg (excluding AC power adapter)Powering +12 VDCMounting Wall and table mountingLEDs POWER, OPTICAL, LAN, UPDATE, ALARM
ComplianceEMC EN55022, CISPR-22 Class B, ETSI 300 386Safety EN60950, UL60950, CE, Optical IEC-60825-1 Class 1 Laser safety per G.664Transient EN/IEC61000-4-4 (2001) level 2Radiant RF Immunity EN/IEC61000-4-3 (2002) level 2Conductive Immunity EN/IEC61000-4-6 (2001) level 2Surge EN/IEC61000-4-5 (2001) 0.5KV (line) and 1.5KV (earth)ESD EN/IEC61000-4-2 (2001) contact level 2 and air discharge level 3
SPECIFICATIONS
Fiber to the Future®24
AONT-1350
ApplicationsAlphion’s standards-based ONT family delivers cost effective revenue generat-ing features for today’s competitive access market. Alphion’s ONT familyprovides flexibility for a variety of network applications. The AONT-1350 SingleFamily Unit (SFU) residential ONT delivers high quality VoIP voice service, Ether-net data service for high-speed internet access and IPTV broadcast video plus RF video service. Optional outdoor enclosure (240-0100121) and indoor mounting bracket (240-0100122) may be ordered separately.
Features and Benefits:Support for a wide range of revenue generating voice features Wire speed 1000Mbps data transferQoS handling including four trafficclasses for triple-play service supportExtensive Ethernet bridging plus VLAN tagging, switching and filteringcapabilities for secure traffic manage-ment across services and end usersPower management for preservation of essential services during AC power outageIndoor or outdoor wall mountable for easy installationCost effective deployment of revenue generating services
Highlights Include:Voice, data, IPTV, and video services supported over a single GPON passive optical linkVoIP Softswitch or CLASS 5 based high quality voice service through two POTS linesHigh speed internet or VoIP access through a single 10/100/1000 Base-TEthernet interfacePacket based interactive IPTV services including multicast video and video-on-demandCATV RF video service via an F-typecoaxial connector
AONT-1350
GPON ONT (1GE+2POTS+RF Hardened)
Fiber to the Future® 25
AONT-1350
Network Interfaces:Optical2.488 Gbps downstream, 1.244 Gbps upstreamOptical wavelengths: 1490 +/-10nm receive 1310 +/-20nm transmit Launch power: 0.5 to +5 dBmReceiver Sensitivity: -27 dBmInput power overload: -8 dBmReceived optical power monitoringSC/APC connector
Subscriber Interfaces:POTS:Two interfaces equipped with RJ-11 or screw down connectors5 REN per lineLoop start/Ground startBalanced and unbalanced ringingCountry specific coefficientsDTMF dialingMetallic loop testing
CATV RF-Video Interface:Single F-type CATV connectorOperating wavelength: 1550 to 1560nmAverage optical power: -8 to +2 dBm RF output level: 18dBRF output Impedance: 75 OhmsPower supply current: 200mATotal RF output Power: 36 dBmV
Ethernet:A single 10/100/1000 Base-T interfaces with RJ-45 connectorMeets IEEE 802.1 specificationsMDI/MDIX auto-sensing and auto-negotiation
Services and Features:GPON:Serial number discovery and registration ID provisioningFull ITU-T G.984 complianceAdvanced Encryption Standard (AES)Dynamic Bandwidth Allocation (DBA)Forward Error Correction (FEC)Support for up to 8 T-CONTS
OAM:ITU-T G.984.4 based management of all servicesRemote firmware upgrade including automatic rollback
Ethernet L2:Ethernet bridging and switching per 802.1DQoS with support with 802.1p and TOS/DSCP mapping802.1Q including VLAN translation, filtering, tagging, stacking(QinQ)Up to 64 VLANsSession hijacking preventionAutomatic MAC address learning and agingUp to 64 MAC address entriesMAC address limitingBroadcast storm controlDownstream rate limiting
IPTVUp to 64 multicast groupsIGMP v2/v3 SnoopingIGMP snooping with immediate leave
VoiceP (RFC 3261)
P (RFC 2327) RTP/RTCP (RFC 3550/3605)11 (μ & a law)
MGCP (RFC 3435)DTMF encoding by RELAY or IN-BAND methodCLASS service support (Caller ID, Call Waiting, Call Forwarding, CallTransfer etc.)T.30 FAX, modem and TTY devicesDHCP Client or static IP configurationVoice Activity Detection and Comfort Noise GenerationProven interoperability with major soft switch and voice gateway vendors
LEDs Video
Dimensions and WeightSize: 9.0 x 10.6 x 2.4 inches / 229 x 270 x 60 mmWeight: 5.0 lbs (2.2 kg)
EnvironmentalONT -40°C to +46°C ambient + solar load -40°F to +114.8°FOutdoor Enclosure -40°C to +65°C -40°F to +149°FHumidity 5% to 90%Outdoor enclosure sold separately
PowerPower Consumption 9.5 - 13.5 WattsPower Input 12 to 14 VdcInput Connection Phoenix plugOptional 802.3af PoE power input Dying Gasp SupportLocal power via UPS with battery backup(Note: local power disconnects PoE power input)
Regulatory Compliance(Designed to meet the following compliance requirements)Safety: UL/CSA 60950, IEC 60950, ETSIFDA – FCC 47 CFR Part 15, Class B and FDR 21 CFR1040.10 and 1040.11 Class 1EMC: FCC PART 15, SUBPART B, CLASS BEN 55022, EN 55024, EN 300 386, CLASS BCE: CompliantRoHS6: CompliantWEEE: Compliant
SPECIFICATIONS
Fiber to the Future®26
AONT-1356
AONT-1356
GPON ONT (1GE+2POTS+RF with return path Hardened)
ApplicationsAlphion’s standards-based ONT family delivers cost effective revenue generat-ing features for today’s competitive access market. Alphion’s ONT familyprovides flexibility for a variety of network applications. The AONT-1356 residen-tial ONT delivers high quality VoIP voice service, Ethernet data service forhigh-speed internet access and IPTV broadcast video plus RF video service. Optional outdoor enclosure (240-0100121) and indoor mounting bracket (240-0100122) may be ordered separately.
Features and Benefits:Support for a wide range of revenue generating voice features
Wire speed 1000Mbps data transfer
QoS handling including four traffic classes for triple-play service support
Extensive Ethernet bridging plus VLAN tagging, switching and filtering capabilities for secure traffic manage-ment across services and end users
Power management for preservation of essential services during AC power outage
Indoor or outdoor wall mountable for easy installation
Cost effective deployment of revenue generating services
An Alphion head-end RF modulator is available for upstream data return channels.
Compatible with installations that use either SA or Motorola head-end
Highlights Include:Voice, data, IPTV, and video services supported over a single GPON passive optical link
VoIP Softswitch or CLASS 5 based high quality voice service through two POTS lines
High speed internet or VoIP access through a single 10/100/1000 Base-TEthernet interface
Packet based interactive IPTV services including multicast video and video-on-demand
RF video with integrated RF Return supporting the 8 to 28 MHz return path frequency band
Fiber to the Future® 27
AONT-1356
Network Interfaces:Optical2.488 Gbps downstream, 1.244 Gbps upstreamOptical wavelengths: 1490 +/-10nm receive 1310 +/-20nm transmitLaunch power: 0.5 to +5 dBmReceiver Sensitivity: -27 dBmInput power overload: -8 dBmReceived optical power monitoringSC/APC connector
Subscriber Interfaces:POTSTwo interfaces equipped with RJ-11 or screw down connectors5 REN per lineLoop start/Ground startBalanced and unbalanced ringingCountry specific coefficientsDTMF dialingMetallic loop testing
CATV RF-Video InterfaceSingle F-type CATV connectorOperating wavelength: 1550 to 1560nmAverage optical power: -8 to +2 dBm RF output level: 18dB RF output Impedance: 75 OhmsPower supply current: 200mATotal RF output Power: 36 dBmV
EthernetA single 10/100/1000 Base-T interfaces with RJ-45 connectorMeets IEEE 802.1 specificationsMDI/MDIX auto-sensing and auto-negotiation
Services and Features:GPONSerial number discovery and registration ID provisioningFull ITU-T G.984 complianceAdvanced Encryption Standard (AES)Dynamic Bandwidth Allocation (DBA)Forward Error Correction (FEC)Support for up to 8 T-CONTS
OAMITU-T G.984.4 based management of all servicesRemote firmware upgrade including automatic rollback
Ethernet L2Ethernet bridging and switching per 802.1DQoS with support with 802.1p and TOS/DSCP mapping802.1Q including VLAN translation, filtering, tagging, stacking (QinQ)Up to 64 VLANsSession hijacking preventionAutomatic MAC address learning and agingUp to 64 MAC address entriesMAC address limitingBroadcast storm controlDownstream rate limiting
RF ReturnFully integrated into the ONTThree wavelength solution SCTE 55-1 and SCTE 55-2 standards F-type coaxial connector 8 to 28 MHz frequency range 24 to 60 dbmv received power input level
IPTVUp to 64 multicast groupsIGMP v2/v3 SnoopingIGMP snooping with immediate leave
VoiceSIP (RFC 3261) SDP (RFC 2327) RTP/RTCP (RFC 3550/3605)
11 (μ & a law)
MGCP (RFC 3435)DTMF encoding by RELAY or IN-BAND methodCLASS service support (Caller ID, Call Waiting, Call Forwarding, CallTransfer etc.)T.30 FAX, modem and TTY devicesDHCP Client or static IP configurationVoice Activity Detection and Comfort Noise GenerationProven interoperability with major soft switch and voice gateway vendors
LEDsVideo
Dimensions and WeightSize: 9.0 x 10.6 x 2.4 inches / 229 x 270 x 60 mmWeight: 5.0 lbs (2.2 kg)
EnvironmentalONT -40°C to +46°C ambient + solar load -40°F to +114.8°FOutdoor Enclosure: -40°C to +65°C -40°F to +149°FHumidity: 5% to 90%Outdoor enclosure sold separately
PowerPower Consumption 9.5 - 13.5 WattsPower Input 12 to 14 VdcInput Connection: Phoenix plugOptional 802.3af PoE power input Dying Gasp SupportLocal power via UPS with battery backup(Note: local power disconnects PoE power input)
Regulatory Compliance(Designed to meet the following compliance requirements)Safety: UL/CSA 60950, IEC 60950, ETSIFDA – FCC 47 CFR Part 15, Class B and FDR 21 CFR1040.10 and 1040.11 Class 1EMC: FCC PART 15, SUBPART B, CLASS BEN 55022, EN 55024, EN 300 386, CLASS BCE: CompliantRoHS6: CompliantWEEE: Compliant
SPECIFICATIONS
Fiber to the Future®28
AONT-2301
ApplicationsAlphion’s standards-based ONT family delivers cost effective revenue gener-ating features for today’s competitive access market. Alphion’s ONT familyprovides flexibility for a variety of network applications. The AONT-2301business ONT delivers high quality VoIP voice service, Ethernet data servicefor high-speed internet access, IPTV video and T1/E1 voice/data transport. Optional outdoor enclosure supporting Optifit connector (240-0100121) and indoor mounting bracket (240-0100122) may be ordered separately.
Features and Benefits:Support for a wide range of revenue generating data, voice and private line features
Wire speed 1000Mbps data transfer
QoS handling including four traffic classes for triple-play service support
Extensive Ethernet bridging plus VLAN tagging, switching and filtering capabilities for secure traffic manage-ment across services and end users
Support for a T1/E1 for corporate/enterprise Private Line or Mobile Backhaul (MBH)
Power management for preservation of essential services during AC power outage, Ethernet port is disconnected after one hour and only POTS and DS1/E1 service are maintained
Indoor or outdoor wall mountable for easy installation
Highlights Include:Voice, data, IPTV, and T1/E1 services supported over a single GPON passive optical link
VoIP Softswitch or CLASS 5 based high quality voice service through eight POTS lines
High speed internet or Transparent LAN service (TLS) access through a single 10/100/1000 Base-T Ethernet interface
Packet based interactive IPTV services including multicast video and video-on-demand
T1/E1 TDM packet transfer over GPON through two RJ-48c interfaces
AONT-2301
GPON ONT (1GE+8POTS+2T1/E1 Hardened)
Fiber to the Future® 29
AONT-2301
Network Interfaces:OpticalRate: 2.488 Gbps downstream 1.244 Gbps upstreamOptical wavelengths: 1490 +/-10nm receive 1310 +/-20nm transmitLaunch power: 0.5 to +5 dBmReceiver sensitivity: -27 dBmInput power overload: -8 dBmReceived optical power monitoringSC/APC connector
Subscriber Interfaces:POTS InterfaceEight interfaces equipped with RJ-11 or screw down connectors5 REN per line, maximum 15 RENLoop startBalanced and unbalanced ringingCountry specific coefficientsDTMF dialingGR-909 metallic loop testing
T1/E1 InterfaceTwo interfaces equipped with RJ-48c jacksSupport for AMI, B8ZS and HDB3 coding SF, ESF and CRC4 multi- frame framing, clock recovery and performance monitoringIETF, MEF and ITU-T standard compliant, G.823, G.824 and ETSI EN 300 912.Differential, Adaptive, or Network TimingRed, Yellow, and AIS Facility Alarming and conditioningGR-1089 CORE Intra-building lightning surge test requirements
Ethernet InterfaceSingle 10/100/1000 Base-T interfaces with RJ-45 connector (100 Ohm (T1) or 75 Ohm (E1) terminations)IEEE 802.1D, 802.1P,802.1w, 802.1ad (Q-in-Q)MDI/MDIX auto-sensing and auto-negotiationTransformer coupled 1500V isolation
Services and Features:GPONSerial number discovery and registration ID provisioningFull ITU-T G.984 complianceAdvanced Encryption Standard (AES)Dynamic Bandwidth Allocation (DBA)Forward Error Correction (FEC)Support for up to 6/8 T-CONTS
OAMITU-T G.984.4 based management of all servicesRemote firmware upgrade including automatic rollback
Ethernet L2Ethernet bridging and switching per 802.1DQoS with support with 802.1p and TOS/DSCP mapping802.1Q including VLAN translation, filtering, tagging/un-tagging, stacking (Q-in-Q)Up to 64 VLANsUp to 64 MAC address entriesMAC address limitingBroadcast storm controlDownstream rate limiting
IPTVUp to 64 multicast groupsIGMP v2/v3 snooping with immediate leave
VoiceSIP (RFC 3261) or H.248 SDP (RFC 2327) RTP/RTCP (RFC 3550,3605)G.711 (μ & a law) voice codecG.726 voice codec Echo Cancellation (ITU-T G.168)DTMF encoding by RELAY (RFC 2833) or IN-BAND methodCLASS / Supplementary service support (Caller ID, Call Waiting, Call Forwarding, Call Transfer etc.)T.38 FAX, modem and TTY devicesDHCP Client or static IP configurationVoice Activity Detection (VAD) and Comfort Noise Generation (CNG)Call Progress tone generationCaller ID FSK tone generationFixed or Adaptive jitter buffer of up to 135 msConfigurable framing size - 10 ms, 20 ms, 30 msPOTS secondary protectionProven interoperability with major soft switch and voice gateway vendors
LEDs
Dimensions and WeightSize: 9.0 x 10.6 x 2.4 inches / 229 x 270 x 60 mmWeight: 5.0 lbs (2.2 kg)
EnvironmentalONT -40°C to +46°C ambient + solar load -40°F to +114.8°FOutdoor Enclosure: -40°C to +65°C
-40°F to +149°FHumidity: 5% to 90%Outdoor enclosure sold separately
PowerPower Consumption: 12-16 Watts (with 8 POTS off-hook, 28mA into 500 ohms)Power Input: 12 to 14 VdcInput Connection: Phoenix plugDying Gasp Support: Battery below 9VLocal power: AC/DC UPS with battery backup
Regulatory Compliance(Designed to meet the following compliance requirements)Safety: UL/CSA 60950, IEC 60950, Class B and FDA 21 CFR 1040.10 and 1040.11 Class 1EMC: FCC Part 15, Sub-part B, CLASS B EN 55022, EN 55024, EN 300 386, CLASS BCE: CompliantRoHS6: CompliantWEEE: Compliant
SPECIFICATIONS
Fiber to the Future®30
AONT-1308
DescriptionAlphion’s standards-based ONT family delivers cost effective revenue generat-ing features for today’s competitive access market. With the broadest array of proven interoperability, Alphion’s ONT family provides flexibility for a variety of network applications.The AONT-1308 residential ONT delivers high quality VoIP voice service, Ethernet data service for high-speed internet access and IPTV broadcast video plus video on demand services. Optional outdoor enclosure (240-0100121) shown in the picture below and indoor mounting bracket (240-0100122) may be ordered separately.
Support for a wide range of revenue generating voice features
Wire speed 1000Mbps data transfer
QoS handling including four traffc classes for triple-play service support
Extensive Ethernet bridging plus VLAN tagging, switching and filtering capabilities for secure traffic manage-ment across services and end users
Power management for preservation of essential services during AC power outage
Indoor or outdoor wall mountable for easy installation
Cost effective deployment of revenue generating services
Feature Summary
Highlights
Voice, data, IPTV, and video services supported over a single GPON passive optical link
VoIP Softswitch or CLASS 5 based high quality voice service through two POTS lines
High speed internet or VoIP access through two 10/100/1000 Base-TEthernet interface
AONT-1308
GPON ONT (2GE+2POTS Hardened)
Fiber to the Future® 31
AONT-1308
Network Interfaces:Optical
Data rate: 2.488 Gbps downstream 1.244 Gbps upstreamOptical wavelengths: 1490 +/-10nm receive 1310 +/-20nm transmit Launch power: 0.5 to +5 dBmReceiver Sensitivity: -27 dBmInput power overload: -8 dBmReceived optical power monitoringSC/APC connector
Subscriber Interfaces:POTS
Two interfaces equipped with RJ-11 connectors or IDC jacks5 REN per lineLoop start/Ground startBalanced and unbalanced ringingCountry specific coefficientsDTMF dialingMetallic loop testing
Ethernet
Two RJ-45 jacks10/100/1000 Base-TMeets IEEE 802.1 specificationsMDI/MDIX auto-sensing Auto-MDI/MDIX and auto speed supported
Services and Features:GPON
Serial number discovery and registration ID provisioningFull ITU-T G.984 complianceAdvanced Encryption Standard (AES)Dynamic Bandwidth Allocation (DBA)8 T-CONTS
OAM
ITU-T G.984.4 based management of all servicesRemote firmware upgrade including automatic rollback
Ethernet L2
Ethernet bridging and switching per 802.1DQoS with support with 802.1p and TOS/DSCP mapping802.1Q including VLAN translation, filtering, tagging, stacking (QinQ)Up to 64 VLANsSession hijacking preventionAutomatic MAC address learning and agingUp to 64 MAC address entriesMAC address limitingBroadcast storm controlDownstream rate limiting
IPTVUp to 64 multicast groupsIGMP v2/v3 snooping with immediate leave
Voice
SIP (RFC 3261)H.248MGCP (RFC 3435)SDP (RFC 2327)RTP/RTCP (RFC 3550/3605)RFC 2833DTMF encoding by RELAY or IN-BAND methodCLASS service support (Caller ID, Call Waiting, Call Forwarding, CallTransfer etc.)G.711 (μ & a law)G.726 voice codecT.30 FAX, modem and TTY devicesDHCP Client or static IP configurationEcho CancellationVoice Activity Detection and Comfort Noise GenerationProven interoperability with major soft switch and voice gateway vendors
LEDs
Dimensions and Weight
Size: 9.0 x 10.6 x 2.4 inches / 229 x 270 x 60 mmWeight: 5.0 lbs (2.2 kg)
Environmental
ONT: -40°C to +46°C ambient + solar load -40°F to +114.8°FOutdoor enclosure -40°C to +65°C -40°F to +149°FHumidity: 5% to 90%Outdoor enclosure sold separately
Power
Power consumption: 12 - 16 WattsPower input: 12 to 14 VdcInput connector: Phoenix type plugDying gasp supportLocal power via UPS with battery backup
Regulatory Compliance
(Designed to meet the following Compliance requirements)Safety: UL/CSA 60950, IEC 60950, ETSIFDA – FCC 47 CFR Part 15, Class B and FDR 21 CFR1040.10 and 1040.11 Class 1EMC: FCC PART 15, SUBPART B, CLASSBEN 55022, EN 55024, EN 300 386, CLASSBCE: CompliantRoHS: CompliantWEEE: Compliant
SPECIFICATIONS
Fiber to the Future®32
AONT-1302
DescriptionAlphion’s standards-based ONT family delivers cost effective revenue generat-ing features for today’s competitive access market. With the broadest array of proven interoperability, Alphion’s ONT family provides flexibility for a variety of network applications. The AONT-1302 residential ONT delivers high quality VoIP voice service, Ethernet data service for high-speed internet access and IPTV broadcast video plus video on demand services. Optional outdoor enclosure (240-0100121) and indoor mounting bracket (240-0100122) may be ordered separately.
Support for a wide range of revenue generating voice features
Wire speed 1000Mbps data transfer
QoS handling including four traffc classes for triple-play service support
Extensive Ethernet bridging plus VLAN tagging, switching and filtering capabilities for secure traffic manage-ment across services and end users
Power management for preservation of essential services during AC power outage
Indoor or outdoor wall mountable for easy installation
Cost effective deployment of revenue generating services
Feature Summary
Highlights
Voice, data, IPTV, and video services supported over a single GPON passive optical link
VoIP Softswitch or CLASS 5 based high quality voice service through four POTS lines
High speed internet or VoIP access through two 10/100/1000 Base-TEthernet interface
AONT-1302
GPON ONT (2GE+4POTS Hardened)
Fiber to the Future® 33
AONT-1302
Network Interfaces:Optical
Data rate: 2.488 Gbps downstream 1.244 Gbps upstreamOptical wavelengths: 1490 +/-10nm receive 1310 +/-20nm transmit Launch power: 0.5 to +5 dBmReceiver Sensitivity: -27 dBmInput power overload: -8 dBmReceived optical power monitoringSC/APC connector
Subscriber Interfaces:POTS
Four interfaces equipped with RJ-11 connectors or IDC jacks5 REN per lineLoop start/Ground startBalanced and unbalanced ringingCountry specific coefficientsDTMF dialingMetallic loop testing
Ethernet
Two RJ-45 jacks10/100/1000 Base-TMeets IEEE 802.1 specificationsMDI/MDIX auto-sensing Auto-MDI/MDIX and auto speed supported
Services and Features:GPON
Serial number discovery and registration ID provisioningFull ITU-T G.984 complianceAdvanced Encryption Standard (AES)Dynamic Bandwidth Allocation (DBA)8 T-CONTS
OAM
ITU-T G.984.4 based management of all servicesRemote firmware upgrade including automatic rollback
Ethernet L2
Ethernet bridging and switching per 802.1DQoS with support with 802.1p and TOS/DSCP mapping802.1Q including VLAN translation, filtering, tagging, stacking (QinQ)Up to 64 VLANsSession hijacking preventionAutomatic MAC address learning and agingUp to 64 MAC address entriesMAC address limitingBroadcast storm controlDownstream rate limiting
IPTVUp to 64 multicast groupsIGMP v2/v3 snooping with immediate leave
Voice
SIP (RFC 3261)H.248MGCP (RFC 3435)SDP (RFC 2327)RTP/RTCP (RFC 3550/3605)RFC 2833DTMF encoding by RELAY or IN-BAND methodCLASS service support (Caller ID, Call Waiting, Call Forwarding, CallTransfer etc.)G.711 (μ & a law)G.726 voice codecT.30 FAX, modem and TTY devicesDHCP Client or static IP configurationEcho CancellationVoice Activity Detection and Comfort Noise GenerationProven interoperability with major soft switch and voice gateway vendors
LEDs
Dimensions and Weight
Size: 9.0 x 10.6 x 2.4 inches / 229 x 270 x 60 mmWeight: 5.0 lbs (2.2 kg)
Environmental
ONT: -40°C to +46°C ambient + solar load -40°F to +114.8°FOutdoor enclosure: -40°C to +65°C -40°F to +149°FHumidity: 5% to 90%Outdoor enclosure sold separately
Power
Power consumption: 12 - 16 WattsPower input: 12 to 14 VdcInput connector: Phoenix type plugDying gasp supportLocal power via UPS with battery backup
Regulatory Compliance
(Designed to meet the following Compliance requirements)Safety: UL/CSA 60950, IEC 60950, ETSIFDA – FCC 47 CFR Part 15, Class B and FDR 21 CFR1040.10 and 1040.11 Class 1EMC: FCC PART 15, SUBPART B, CLASSBEN 55022, EN 55024, EN 300 386, CLASSBCE: CompliantRoHS: CompliantWEEE: Compliant
SPECIFICATIONS
Fiber to the Future®34
AONT-1240
AONT-1240
GPON ONT (4GE+2POTS)
Feature SummaryIndoor wall or table mount
Four 10/100/1000Base-T Ethernet RJ-45 ports
Built-in L3 routing gateway with NAT/NAPT and firewall
Two analog 2-wire RJ-11 (POTS) VoIP SIP voice ports, G.711/G.729 codec, 5 REN per port
CLASS 5 voice services
Built-in L2 wire-speed switch , 256 MAC addresses and 16 VLAN VIDs
MAC address limiting
Customer VID (VLAN ID) tagged (802.1Q), priority tagged (802.1p) and untagged frames, stacked VLAN (Q-in-Q)
ToS/DSCP to 802.1p mapping
IGMPv1/v2/v3 snooping and filtering
Ethernet UNI output shaping, and upstream scheduling
GPON “dying gasp” power loss indica-tion
ApplicationsThe AONT-1240 has been optimized for single family homes or apartments and small home offices (SOHO) or small businesses that require advanced gateway functions.
High Bandwidth GPONThe AONT-1240 is fully FSAN (ITU-T G.984) compliant with a 1.244 Gbps upstream and 2.488 Gbps downstream, Class B+ GPON system. In addition, it supports downstream AES (128-bit key) and downstream and/or upstream FEC RS(255,239).
Ethernet Quality of ServiceThe AONT-1240 has extensive Ethernet QoS features, including 802.3x flow control, DSCP to 802.1p mapping, upstream congestion control, and down-stream traffic scheduling for premium or time sensitive content. Intelligent and robust buffer and queue management for Ethernet traffic, with individual priori-tizable queues, ensures that tiered residential service offerings based on differ-ent bit-rates and QoS can be supported.
GatewayThe AONT-1240 contains both a built-in wire-speed L2 802.1Q VLAN switch and a built-in L3 routing gateway with port forwarding, NAT and NAPT address trans-lation, built-in PPPoE support for high speed Internet service, and an integrated stateful packet inspection firewall with configurable access control list (ACL) and application-level gateway (ALG). Support for VPN (L2TP, PPTP and IPSec) pass through is also provided. As part of the gateway function there is a DHCP Client and server, and a DNS server.
SecurityThe AONT-1240 comes with the latest security features, including MAC address spoofing protection, MAC/IP address port binding, MAC/IP address limiting on a per port basis, per-port access control list (ACL) based on port, MAC address or Ether-type and DOS prevention.
Flexible ManagementThe AONT-1240 is managed from the AOLT-4000 OLT over the GPON’s OMCI channel. The AOLT in turn is managed with either Alphion’s Element Manage-ment System (AEMS) that provides configuration, profile based provisioning, event and fault management and performance monitoring for the AONT, or with a 3rd party EMS using SNMP or a legacy NMS.
Fiber to the Future® 35
AONT-1240
Voice InterfacesType Two FXS POTS RJ-11 interfacesVoIP Protocol SIP (RFC3261), SDP (RFC2327), RTP/RTCP (RFC3550/3551)Codec Multiple codec support G.711,G729A/BDTMF RFC2833 SIP INFO or in-bandRinger 5REN per port, 55V RMS, balancedTones and ring ConfigurableDial plan ConfigurableFAX and modem G.711 for FAX/modem in TTY or T.38 FAXCLASS 5 services Yes, variousConditioning Echo cancellation, voice activity detection (VAD), comfort noise generation (CNG)Jitter buffer Static or dynamic
EnvironmentalTemperature 0 to +50 ºC Humidity 5 to 95% (non-condensing)Mounting Wall and table mounting
PhysicalH x W x D 130 mm x 172 mm x 33 mmWeight 0.4kg (excluding AC power adapter)Powering +12 VDC feed via external AC/DC adapterMounting Wall and table mountingLEDs POWER, OPTICAL, LAN, UPDATE, ALARM, POTS
ComplianceEMC EN55022, CISPR-22 Class B, ETSI 300 386, TEC SD/EMI-01/02 Sept. 2001Safety EN60950, UL60950, CELaser Safety IEC-60825-1 Class 1 laser safety per G.664, FDA 21 CFR 1040.10 & 1040.11 Class 1Transient EN/IEC61000-4-4 (2001) level 2Radiant RF Immunity EN/IEC61000-4-3 (2002) level 2Conducted Immunity EN/IEC61000-4-6 (2001) level 2Surge EN/IEC61000-4-5 (2001) 0.5 KV (line) and 1.5 KV (earth)ESD EN/IEC61000-4-2 (2001) contact level 2 and air discharge level 3
Optical InterfaceStandard Fully ITU-T G.984 compliantLink Budget 28 dB (Class B+) Wavelength Upstream: 1310 nm Downstream: 1490 nmLine rate Upstream: 1.244 Gbps Downstream: 2.488 GbpsOutput power +0.5 to +5.0 dBmSensitivity -27 dBm (at 10 dB extinction ratio)Overload -8 dBmDistance up to 60 km (depending on split ratio and reach exension)Connector SC/APC
GPON TC LayerAES 128-bit keyFEC RS(255,239)DBA DBRu mode 0GEM port Up to 32T-CONT/AllocID Up to 8
Data InterfaceType (wired) Four 10/100/1000Base-T RJ-45 Ethernet interfacesRate & Duplex Auto-negotiationMDI/MDIX Auto-sensingVLAN Support 802.1Q with VLAN tag manipula- tion as well as legacy mode operation , VLAN stacking (Q-in-Q), VLAN translationMAC & VLAN table 256 MAC addresses and 16 VLAN IDsMukticast 128 multicast groups, IGMP V2/V3 snooping/proxySecurity Broadcast/multicast rate limiting, MAC address limitingPriority CoS based on VID, 802.1p, and IP ToS/DSCP, and IP VID=0 802.1p, ToS/DSCP to 802.1p mapping, 802.1p marking/remarking
GatewayRouting L3 software configurableAddress assignment PPPoE, DHCP or staticAddress translation NAT/NAPT and STP firewall with ACL and ALG (application-level gateway)Services DHCP client and server, DNS, VPN (PPTP, L2TP, IPSec) pass-through, port forwarding
SPECIFICATIONS
Fiber to the Future®36
AONT-1315
AONT-1315
GPON ONT (4GE+2POTS)
Features and Benefits
Highlights:
Indoor wall or desk mountable for easy installation
Wire speed 1000Mb/s data transfer at all packet sizes
Cost effective deployment of revenue generating services
Support for a wide range of revenue generating voice features
QoS handling including four traffic classes for triple-play service support
Power management for essential service preservation during AC power outage
Extensive Ethernet bridging plus VLAN tagging, switching and filteringcapabilities for secure traffic manage-ment across services and end users
Voice,data,IPTV,andvideoservicessupported over a single GPON passive optical link
VoIP Softswitch or CLASS 5 based highquality voice service through two POTS lines
Packet based interactive IPTV servicesincluding multicast video and video-on-demand
Highspeedinternet or VoIPaccessthroughfour 10/100/1000 Base-TEthernet interface ports
Alphion’s standards-based ONT family delivers cost effective revenue generat-ing features for today’s competitive access market. With the broadest array of proven interoperability, Alphion’s ONT family provides flexibility for a variety of network applications.
The 1315 SFU residential ONT delivers high quality VoIP voice service, Ethernet data service for high-speed internet access and IPTV broadcast video plus video on demand services.
Fiber to the Future® 37
AONT-1315
Network Interfaces:Optical
2.488 Gbps downstream, 1.244 Gbps upstreamOptical wavelengths: 1490 +/-10nm receive 1310 +/-20nm transmit Launch power: 0.5 to +5 dBmReceiver Sensitivity: -27 dBmInput power overload: -8 dBmReceived optical power monitoring
Subscriber Interfaces POTS
Two interfaces equipped with RJ-11 connectors5 REN per lineLoop start/Ground startBalanced and unbalanced ringingCountry specific coefficientsDTMF dialingMetallic loop testing
Ethernet10/100/1000 Base-T interface with four RJ-45 connectorsMeets IEEE 802.1 specificationsMDI/MDIX auto-sensing and auto-negotiation
Services and Features GPON:
Serial number discovery and registration ID provisioningFull ITU-T G.984 complianceAdvanced Encryption Standard (AES)Dynamic Bandwidth Allocation (DBA)Forward Error Correction (FEC)Support for up to 8 T-CONTSMultiple GEM ports with flexible mapping between TCONTsTraffic management (shaping and priority queuing)
OAM:ITU-T G.984.4 based management of all servicesRemote firmware upgrade including automatic rollback
Ethernet bridging and switching per 802.1DQoS with support with 802.1p and TOS/DSCP mapping802.1Q including VLAN translation, filtering, tagging, stacking (QinQ) Up to 16 VLAN groupsSession hijacking preventionAutomatic MAC address learning and agingUp to 256 MAC address entriesMAC address limitingBroadcast storm control
Up to 256 multicast groupsIGMP v2/v3 SnoopingIGMP snooping with immediate leaveIGMP snooping with proxy reporting
Voice:SIP (RFC 3261)H.248SDP (RFC 2327)RTP/RTCP (RFC 3550/3605)RFC 2833DTMF encoding by RELAY or IN-BAND methodCLASS service support (Caller ID, Call Waiting, Call Forwarding, Call Transfer etc.)G.711 (μ & a law)G.729 (a+b) and G.723.1 voice codecsT.30 FAX, modem and TTY devicesT.38 FAXDHCP Client or static IP configurationEcho CancellationVoice Activity Detection and Comfort Noise GenerationProven interoperability with major soft switch and voice gateway vendors
LEDs:Power
Dimensions and Weight:Size: 10.25 x 6 x 1.75 inches (260 x 152 x 45 mm)Weight: 2 lbs (0.9 kg)
Environmental:0°C to +40 °C ( 32°F to +104 °F) ambientHumidity: 5% to 90%
Power:Power Input: 12VDCPower Consumption: Less than 12 WattsInput connection: 2.5 mm plug or UPS Molex connection
Regulatory Compliance:Safety: UL/CSA 60950, IEC 60950, ETSIFDA – FCC 47 CFR Part 15, Class B and FDR 21 CFR1040.10 and 1040.11 Class 1EMC: FCC PART 15, SUBPART B, CLASS BEN 55022, EN 55024, EN 300 386, CLASS BCE: CompliantRoHS6: CompliantWEEE: Compliant
IPTV:
Ethernet L2
SPECIFICATIONS
Fiber to the Future®38
AONT-1604
AONT-1604
GPON ONT (4GE+2POTS)
ApplicationsThe AONT-1604 has been optimized for residential homes to provide triple play services.
Advanced GPON technologyThe AONT-1604 is fully FSAN (ITU-T G.984) compliant with a 1.244 Gbps upstream and 2.488 Gbps downstream, Class B+ GPON system.
Quality of ServiceThe AONT-1604 supports extensive QoS features, including 802.3x flow control, DSCP to 802.1p mapping, upstream congestion control, and downstream traffic scheduling for premium or time sensitive content. Intelligent and robust buffer and queue management for Ethernet traffic, with individually prioritized queues, ensures that tiered service offerings based on different bit-rates and QoS can be supported.
GatewayThe AONT-1604 contains both wire-speed L2 switch and L3 routing gateway with port forwarding, NAT and NAPT address translation, built-in PPPoE support for HSI, and a integrated stateful packet inspection firewall with a configurable access control list (ACL) and application-level gateway (ALG). Support for VPN (L2TP, PPTP and IPSec) pass through is also provided. Included as part of the gateway function are DHCP client, DHCP server, and DNS server for both IPv4 and IPv6.
SecurityThe AONT-1604 comes with the latest security features, including MAC address spoofing protection, MAC/IP address port binding, per-port access control list (ACL) based on port, MAC address and Ether-type, DoS prevention.
ITU-T G.984 compliantIndoor wall or table mountFour 10/100/1000Base-T Ethernet RJ-45 portsTwo FXS RJ-11 portsVoIP features: SIP, multiple voice codecs, T.38 fax, and various CLASS servicesIntegrated router with features such as IPv4, IPv6, IPoE, PPPoE, NAT, DHCP, DNS, IP filtering, IP forwarding, static IP routing, IP QoS and firewall IPv6 ready logo certifiedBuilt-in L2 wire-speed switch with dynamic bridging, 256 MAC addresses, 4k VLANs (802.1q tagged, untagged, port based, priority tagged, double tagged)ToS/DSCP to 802.1p mappingFlexible traffic mapping, policing and shapingIGMPv2/v3 snooping, proxy and filtering, 256 multicast groupsMLD snoopingWeb based GUI for local provisioning and software upgradeDual managed by ITU-T G.988 OMCI and/or remote management functions as TR-069 and Telnet for provisioning,diagnostics, monitoring, and software upgrade
Feature Summary
Fiber to the Future® 39
AONT-1604
GPON interfaceStandard Fully ITU-T G.984 compliantLink Budget 28 dB (Class B+) ITU G.984.2 Amd1Wavelength transmit: 1310+/-20nm; receive: 1490+/-10nmLine rate Upstream: 1.244 Gbps; Downstream: 2.488 GbpsOutput power +0.5 to +5.0 dBmSensitivity -27 dBm (at 10 dB extinction ratio)Overload -8 dBmDistance up to 60 km (depending on split ratio and reach extension)OLS per ITU-T G.984.2amd2Connector SC/APCTC layer AES (128-bit key) and FEC RS(255,239)DBA DBRu mode 0GEM port up to 32T-CONT up to 8
Ethernet interfaceGE port four RJ-45 connectorsStandard 10/100/1000Base-T with rate and duplex
auto-negotiation and MDI/MDIX auto-sensingFlow control per 802.3x
Voice interfacePOTS two RJ-11 connectorsInterface 5 REN per line, loop start, balanced and unbalanced ringing, country specific impedance, DTMF dialing, metallic loop testing
PowerAC adapter input: 100-240VAC, 50/60Hz; output: 12VDC, 1.5AControl power on/off switch
PhysicalTemperature 0 to 40 ºCHumidity 5 to 90% non-condensingDimension 200mm(W) x 150mm(D) x 35mm(H)Weight 0.7kgMounting wall or tableLEDs Power, GPON, LOS, Internet, VoIP1-2, LAN1-4
Regulatory complianceCertification CE compliantEMC EN55022, CISPR-22 Class BSafety EN60950/UL60950Laser safety IEC-60825-1 Class 1 laser safety per G.664Transient EN/IEC61000-4-4(2001) level 2Immunity radiant RF: EN/IEC61000-4-3(2002) level 2
conducted RF: EN/IEC61000-4-6(2001) level 2Surge EN/IEC61000-4-5(2001) 0.5 KV (line) and 1.5 KV (earth)ESD EN/IEC61000-4-2(2001)
contact level 2, air discharge level 3Hazardous RoHS6, WEEE
Software features:
L2 featuresBridging 802.1d transparent bridging, 256MAC table, broadcast/multicast and DLF rate limitingVLAN 4,095 VLANs, untagged, priority tagged, port based, 802.1q tagged VLAN, 802.1ad double tagged VLAN, VLAN translationMulticast IGMPv2/v3 snooping, 256 multicast groupsQoS 802.1p, IP ToS/DSCP to 802.1p mapping, 802.1p remarkingScheduling SP, WRR, WFQCongestion RED, WRED
Gateway features for IPv4 and IPv6WAN PPPoE, DHCP client or static IP, NAT/NAPT, port forwarding, port triggeringLAN DHCP server and relay agent, DHCP option 60, DNS relay, UPnPRouting RIP v1/v2 and static IP routing
IPv6 supportCertification IPv6 Ready Logo certifiedMode Dual stack lite, 6rd
FirewallType stateful packet inspection, Filtering DoS attack prevention, IP source/destination filtering, TCP/UDP port source/destination filtering, MAC source filteringALGs FTP, SIP, H.323, RSTPVPN PPTP, L2TP, IPSec pass-through Access control DMZ, Parental Controls
VoIPProtocols SIP(RFC3261), SDP(RFC2327), RTP/RTCP (RFC3550/3605), RFC2833CLASS caller ID, call waiting, call forwarding, call transfer, 3-way conference, etc.Codec ITU-T G.711 (μ & a law), G.723.1, G.729a/b, echo cancellation, voice activity detection, silence suppression and comfort noise generationFax ITU-T T.30, T.38IP address DHCP client or static IP configurationIOP proven interoperability with major soft switch and voice gateway vendors
ManagementLocal Web based GUIRemote ITU-T G.988 OMCI, TR-069, Telnet
SPECIFICATIONS
Fiber to the Future®40
AONT-1601
AONT-1601
GPON ONT (4GE+2POTS+WiFi)
ApplicationsThe AONT-1601 has been optimized for residential homes to provide triple play services.
Advanced GPON technologyThe AONT-1601 is fully FSAN (ITU-T G.984) compliant with a 1.244 Gbps upstream and 2.488 Gbps downstream, Class B+ GPON system.
Quality of ServiceThe AONT-1601 supports extensive QoS features, including 802.3x flow control, DSCP to 802.1p mapping, upstream congestion control, and downstream traffic scheduling for premium or time sensitive content. Intelligent and robust buffer and queue management for Ethernet traffic, with individually prioritized queues, ensures that tiered service offerings based on different bit-rates and QoS can be supported.
GatewayThe AONT-1601 contains both wire-speed L2 switch and L3 routing gateway with port forwarding, NAT and NAPT address translation, built-in PPPoE support for HSI, and a integrated stateful packet inspection firewall with a configurable access control list (ACL) and application-level gateway (ALG). Support for VPN (L2TP, PPTP and IPSec) pass through is also provided. Included as part of the gateway function are DHCP client, DHCP server, and DNS server for IPv4 and IPv6.
SecurityThe AONT-1601 comes with the latest security features, including MAC address spoofing protection, MAC/IP address port binding, per-port access control list (ACL) based on port, MAC address and Ether-type, DoS prevention, and wireless encryption protocols such as WEP, and WPA/WPA2.
Flexible ManagementThe AONT-1601 is managed from the AOLT-4000 OLT via OMCI. The AOLT in turn is managed with either Alphion’s Element Management System (AEMS) that provides configuration, profile based provisioning, event and fault management and performance monitoring for the AONT, or with a 3rd party NMS via northbound interface.
ITU-T G.984 compliantIndoor wall or table mountFour 10/100/1000Base-T Ethernet RJ-45 portsTwo FXS RJ-11 portsOne USB 2.0 port802.11b/g/n 2Tx2R WiFi interfaceVoIP features: SIP, multiple voice codecs, T.38 fax, and various CLASS servicesIntegrated router with features such as IPv4, IPv6, IPoE, PPPoE, NAT, DHCP, DNS, IP filtering, IP forwarding, static IP routing, IP QoS and firewall IPv6 ready logo certifiedBuilt-in L2 wire-speed switch with dynamic bridging, 256 MAC addresses, 4k VLANs (802.1q tagged, untagged, port based, priority tagged, double tagged)ToS/DSCP to 802.1p mappingFlexible traffic mapping, policing and shapingIGMPv2/v3 snooping, proxy and filtering, 256 multicast groupsMLD snoopingWeb based GUI for local provisioning and software upgradeDual managed by ITU-T G.988 OMCI and/or remote management functions as TR-069 and Telnet for provisioning,diagnostics, monitoring, and software upgrade
Feature Summary
Fiber to the Future® 41
AONT-1601
GPON interfaceStandard Fully ITU-T G.984 compliantLink Budget 28 dB (Class B+) ITU G.984.2 Amd1Wavelength transmit: 1310+/-20nm; receive: 1490+/-10nmLine rate Upstream: 1.244 Gbps; Downstream: 2.488 GbpsOutput power +0.5 to +5.0 dBmSensitivity -27 dBm (at 10 dB extinction ratio)Overload -8 dBmDistance up to 60 km (depending on split ratio and reach extension)OLS per ITU-T G.984.2amd2Connector SC/APCTC layer AES (128-bit key) and FEC RS(255,239)DBA DBRu mode 0GEM port up to 32T-CONT up to 8
Ethernet interfaceGE port four RJ-45 connectorsStandard 10/100/1000Base-T with rate and duplex
auto-negotiation and MDI/MDIX auto-sensingFlow control per 802.3x
Voice interfacePOTS two RJ-11 connectorsInterface 5 REN per line, loop start, balanced and unbalanced ringing, country specific impedance, DTMF dialing, metallic loop testing
WiFi interfaceStandard 802.11b/g/nAntenna high gain, tilt and swivel design for optimal receptionTransceiver 2Tx2R MIMO, up to 30dBm EIRP, STBC, up to 270MbpsFrequency single band, 2.4GHzSSID up to 4, broadcast or hidden, user isolation between SSIDsSecurity WEP(128/64bit), WPA, WPA2, WPA-PSK, WPS/WLAN push buttonAuthentication 802.1x MAC, RadiusFiltering MAC address per SSIDThroughput ≥1,700 fps (WLAN to LAN and vice versa)
PowerAC adapter input: 100-240VAC, 50/60Hz; output: 12VDC, 1.5AControl power on/off switch
PhysicalTemperature 0 to 40 ºCHumidity 5 to 90% non-condensingDimension 200mm(W) x 150mm(D) x 35mm(H)Weight 0.7kgMounting wall or tableLEDs Power, GPON, LOS, Internet, VoIP1-2, LAN1-4, WLAN, WPS, USB
USB interfaceStandard USB 2.0 hostConnector type A receptacle
Software features:
L2 featuresBridging 802.1d transparent bridging, 256MAC table, broadcast/multicast and DLF rate limitingVLAN 4,095 VLANs, untagged, priority tagged, port based, 802.1q tagged VLAN, 802.1ad double tagged VLAN, VLAN translationMulticast IGMPv2/v3 snooping, 256 multicast groupsQoS 802.1p, IP ToS/DSCP to 802.1p mapping, 802.1p remarkingScheduling SP, WRR, WFQCongestion RED, WRED
Gateway features for IPv4 and IPv6WAN PPPoE, DHCP client or static IP, NAT/NAPT, port forwarding, port triggeringLAN DHCP server and relay agent, DHCP option 60, DNS relay, UPnPRouting RIP v1/v2 and static IP routing
IPv6 supportCertification IPv6 Ready Logo certifiedMode Dual stack lite, 6rd
FirewallType stateful packet inspection, Filtering DoS attack prevention, IP source/destination filtering, TCP/UDP port source/destination filtering, MAC source filteringALGs FTP, SIP, H.323, RSTPVPN PPTP, L2TP, IPSec pass-through Access control DMZ, Parental Controls
VoIPProtocols SIP(RFC3261), SDP(RFC2327), RTP/RTCP (RFC3550/3605), RFC2833CLASS caller ID, call waiting, call forwarding, call transfer, 3-way conference, etc.Codec ITU-T G.711 (μ & a law), G.723.1, G.729a/b, echo cancellation, voice activity detection, silence suppression and comfort noise generationFax ITU-T T.30, T.38IP address DHCP client or static IP configurationIOP proven interoperability with major soft switch and voice gateway vendors
ManagementLocal Web based GUIRemote ITU-T G.988 OMCI, TR-069, Telnet
Regulatory complianceCertification CE compliantEMC EN55022, CISPR-22 Class BSafety EN60950/UL60950Laser safety IEC-60825-1 Class 1 laser safety per G.664Transient EN/IEC61000-4-4(2001) level 2Immunity radiant RF: EN/IEC61000-4-3(2002) level 2
conducted RF: EN/IEC61000-4-6(2001) level 2Surge EN/IEC61000-4-5(2001) 0.5 KV (line) and 1.5 KV (earth)ESD EN/IEC61000-4-2(2001)
contact level 2, air discharge level 3Hazardous RoHS6, WEEE
SPECIFICATIONS
Fiber to the Future®42
AONT-3030
AONT-3030GPON MDU (24FE)
Feature Summary
ApplicationsThe AONT-3030 has been optimized for a multi-dwelling environment .
High Bandwidth GPONThe AONT-3030 is fully FSAN (ITU-T G.984) compliant with a 1.244 Gbps upstream and 2.488 Gbps downstream, Class B+ GPON system. In addition, it supports downstream AES (128-bit key) and downstream and/or upstream FEC RS(255,239).
Ethernet Quality of ServiceThe AONT-3030 has extensive Ethernet QoS features, including 802.3x flow control, DSCP to 802.1p mapping, upstream congestion control, and down-stream traffic scheduling for premium or time sensitive content. Intelligent and robust buffer and queue management for Ethernet traffic, with individual priori-tizable queues, ensures that tiered residential service offerings based on differ-ent bit-rates and QoS can be supported.
SecurityThe AONT-3030 comes with the latest security features, including MAC address spoofing protection, MAC/IP address port binding, MAC/IP address limiting on a per port basis, local port-to-port switching blocking option, per-port access control list (ACL) based on port, MAC address and Ether-type, and DOS preven-tion.
Flexible ManagementThe AONT-3030 is managed from the AOLT-4000 OLT over the GPON’s OMCI channel. The AOLT in turn is managed with either Alphion’s Element Manage-ment System (AEMS) that provides configuration, profile based provisioning, event and fault management and performance monitoring for the AONT, or with a 3rd party EMS using SNMP or a legacy NMS.
19 inch rack mount
Indoor wall or rack mount
Twenty four RJ-45 fast Ethernet inter-faces
Built-in L2 switch , 1,024 MAC addresses and 512 VLAN IDs
MAC address limiting, Broadcast / Multicast rate limiting
Customer VLAN tagged (802.1p), prior-ity tagged and untagged frames
ToS/DSCP to 802.1p mapping and 802.1p marking/remarking
IGMPv1/v2/v3 snooping and filtering
Ethernet UNI output shaping, and upstream scheduling
GPON “dying gasp” power loss indica-tion
Fiber to the Future® 43
AONT-3030
Optical InterfaceStandard Fully ITU-T G.984 compliantLink udget 28 dB (Class B+)Wavelength Upstream: 1310 nm Downstream: 1490 nmLine rate Upstream: 1.244 Gbps Downstream: 2.488 GbpsOutput power +0.5 to +5.0 dBmSensitivity -27 dBm (at 10 dB extinction ratio)Overload -8 dBmDistance up to 60 km (depending on split ratio and reach extension)Connector SC/APC with 30 degree access
GPON TC LayerFEC & AES AES (128-bit key) and FEC RS(255, 239)DBA YesNo. GEM Ports Number is software dependentNo. TCONT/AllocID Number is software dependent
PhysicalH x W x D 44 mm x 440 mm x 280 mm (without brackets)Weight 4.1kgPowering 100-240 VAC, 3-pin AC power connector with on/off switch and fuseMounting Rack and wall mountable
Fast EthernetType 24 10/100Base-T RJ-45 Ethernet interfacesRate & duplex Auto-negotiationMDI/MDIX Auto-sensingVLAN support 802.1Q with VLAN tag manipulation, VLAN stacking (Q-in-Q), VLAN translationMAC & VLAN Table 1,024 MAC Address and 512 VLAN IDsPriority CoS based on VID, 802.1p, and IP ToS/DSCP ToS/DSCP to 802.1p mapping, 802.1p marking / remark- ing
EnvironmentalTemperature 0 to +50ºCHumidity 5% to 95% (non-condensing)
ComplianceEMC EN55022, CISPR-22 Class B, ETSI 300 386, TEC SD/EMI-01/02 Sept. 2001Safety EN60950, UL60950, CELaser Safety IEC-60825-1 Class 1 laser safety per G.664, FDA 21 CFR 1040.10 & 1040.11 Class 1Environmental QM-333 ‘B2” Category, WEEE, RoHS6Transient EN/IEC61000-4-4 (2001) level 2Radiant RF Immunity EN/IEC61000-4-3 (2002) level 2Conducted Immunity EN/IEC61000-4-6 (2001) level 2Surge EN/IEC61000-4-5 (2001) 0.5 KV (line) and 1.5 KV (earth)ESD EN/IEC61000-4-2 (2001) contact level 2 & air discharge level 3
SPECIFICATIONS
Fiber to the Future®44
AONT-3330GPON MDU (24FE+24POTS)
Feature Summary
ApplicationsThe AONT-3330 has been optimized for the multi-dwelling environment .
High Bandwidth GPONThe AONT-3330 is fully FSAN (ITU-T G.984) compliant with a 1.244 Gbps upstream and 2.488 Gbps downstream, Class B+ GPON system. In addition, it supports downstream AES (128-bit key) and downstream and/or upstream FEC RS(255,239).
Ethernet Quality of ServiceThe AONT-3330 has extensive Ethernet QoS features, including 802.3x flow control, DSCP to 802.1p mapping, upstream congestion control, and down-stream traffic scheduling for premium or time sensitive content. Intelligent and robust buffer and queue management for Ethernet traffic, with individual priori-tizable queues, ensures that tiered residential service offerings based on differ-ent bit-rates and QoS can be supported.
SecurityThe AONT-3330 comes with the latest security features, including MAC address spoofing protection, MAC/IP address port binding, MAC/IP address limiting on a per port basis, local port-to-port switching blocking option, per-port Access Control List (ACL) based on port, MAC address and Ether-type, and DOS preven-tion.
Flexible ManagementThe AONT-3330 is managed from the AOLT-4000 OLT over the GPON’s OMCI channel. The AOLT in turn is managed with either Alphion’s Element Manage-ment System (AEMS) that provides configuration, profile based provisioning, event and fault management and performance monitoring for the AONT, or with a 3rd party EMS using SNMP or a legacy NMS.
19 inch rack mount
Indoor wall or rack mount
Twenty four RJ-45 fast Ethernet interfaces
Twenty four analog 2-wire RJ-21 50-pin POTS VoIP SIP voice ports
CLASS 5 Voice Services
Built-in L2 switch , 1,024 MAC addresses and 512 VLAN IDs
MAC address limiting, Broadcast / Multicast rate limiting
Customer VLAN tagged (802.1p), prior-ity tagged and untagged frames
ToS/DSCP to 802.1p mapping and 802.1p marking/remarking
IGMPv1/v2/v3 snooping and filtering
Ethernet UNI output shaping, and upstream scheduling
GPON “dying gasp” power loss indica-tion
AONT-3330
Fiber to the Future® 45
CapacityStandard Fully ITU-T G.984 compliantLink budget 28 dB (Class B+)Wavelength Upstream: 1310 nm Downstream: 1490 nmLine rate Upstream: 1.244 Gbps Downstream: 2.488 GbpsOutput power +0.5 to +5.0 dBmSensitivity -27 dBm (at 10 dB extinction ratio)Overload -8 dBmDistance up to 60 km (depending on split ratio and reach amplification)Connector SC/APC with 30 degree access
GPON TC LayerFEC & AES AES (128-bit key) and FEC RS(255, 239)DBA YesNo. GEM Ports Number is software dependentNo. TCONT/AllocID Number is software dependent
Fast EthernetType 24 10/100Base-T RJ-45 Ethernet interfacesRate & duplex Auto-negotiationMDI/MDIX Auto-sensingVLAN support 802.1Q with VLAN tag manipula- tion, VLAN stacking (Q-in-Q), VLAN translationMAC & VLAN Table 1,024 MAC Address and 512 VLAN IDsPriority CoS based on VID, 802.1p, and IP ToS/DSCP ToS/DSCP to 802.1p mapping, 802.1p marking / remarking
PhysicalH x W x D 44 mm x 440 mm x 280 mm (without brackets)Weight 4.1kgPowering 100-240 VAC, 3-pin AC power connector with on/off switch and fuseMounting Rack and wall mountable
Voice InterfaceType FXS 24 POTS interfaces, Telco-50 connectorsVoIP Protocol SIP (RFC3261) with SDP (RFC2327) and RTP (RFC3550/3551)Codec Multiple codec support G.711, G729A/BDTMF RFC2833 SIP info or in-bandRing 5REN per port, 55V RMS, balancedTones and Ring ConfigurableDial Plan ConfigurableFAX and Modem G.711 for FAX/modem in TTY or T.38 FAXCLASS Services Various (Caller ID, Call Waiting, Call Transfer, Call Forwarding Three-way Calling, Distinctive Ringing, etc.)Conditioning Echo Cancellation, Voice Activity Detection, Comfort Noise General- izationJitter buffer Static or dynamic
EnvironmentalTemperature 0 to +50ºCHumidity 5% to 95% (non-condensing)
ComplianceEMC EN55022, CISPR-22 Class B, ETSI 300 386, TEC SD/EMI-01/02 Sept. 2001Safety EN60950, UL60950, CELaser Safety IEC-60825-1 Class 1 laser safety per G.664, FDA 21 CFR 1040.10 & 1040.11 Class 1Environmental QM-333 ‘B2” Category, WEEE, RoHS6Transient EN/IEC61000-4-4 (2001) level 2Radiant RF Immunity EN/IEC61000-4-3 (2002) level 2Conducted Immunity EN/IEC61000-4-6 (2001) level 2Surge EN/IEC61000-4-5 (2001) 0.5 KV (line) and 1.5 KV (earth)ESD EN/IEC61000-4-2 (2001) contact level 2 & air discharge level 3
AONT-3330
SPECIFICATIONS
Fiber to the Future®46
AONT-UPS-Family AONT-UPS-Family
AONT-UPS-FamilyONT Uninterruptible Power Supply
DescriptionThe Alphion power saving AONT-UPS protects the AONT-100, AONT-1000 and AONT-2000 family of ONTs from bad power as a result of surges and power outs. The AONT-UPS is a compact backup power solution companion to the AONT-100, AONT-1000 and AONT-2000 family of ONTs. The unit can be either wall mounted or placed on the floor near the ONT.
ApplicationsThe AONT-UPS is meant to provide uninterrupted service from the AONT-100, AONT-1000 and AONT-2000 family of ONTs. This ensures that voice, data, and internet are fully functional, even during a power outage or power surge, for up to 5 hours. When the power supply is restored, the back-up battery charges up in 18 hours or less depending on the battery discharge during the power out.
Safe and Reliable OperationThe AONT-UPS comes with built in over voltage and over current protection. In addition, the unit also includes a Low-Voltage-Disconnect circuit function that disconnects the battery when it gets below 10.5V. The surge protection features helps prevent damage to the Alphion ONT products that can occur due to frequent power fluctuations.
Power backup for AONT-100, AONT-1000 and AONT-2000 series
Over 18 watts of regulated 12V DC to the load
Input overcurrent protection
Output overvoltage and overcurrent protection
Thermal shutdown protection
CE, QM 333, and QM 301 compliant
Missing battery indicator
Failed battery indicator
Up to 5 hour reserve operation in case of an AC power failure
Fully charged in 18 hours while provid-ing power to SFU
Sealed maintenance-free battery
Low-Voltage-Disconnect (LVD) circuit - when battery voltage goes below 10.5V
Feature Summary
Input Voltage Range: 100-250 VAC Operational Voltage Range: 85-270 VACInput Frequency: 45-63 HzOutput Voltage range: 9.2-14.7 VDC (continuously adjustable)Battery cut-off: 10.25-10.6 VDC
Specifications AC Conn AlarmDC ConnOrder PN
AONT-UPS-01AONT-UPS-02AONT-UPS-03AONT-UPS-04AONT-UPS-05AONT-UPS-06AONT-UPS-07AONT-UPS-08AONT-UPS-CSYS
US 2pinUS 2pinUS 2pin
India 3pinIndia 3pin
India 3pin
Euro CEE 7/16
Euro CEE 7/16Euro CEE 7/16
Terminal
Barrel2x4
Terminal
Barrel2x4
Terminal
Barrel2x4
Yes
No
Yes
YesYes
YesYes
No
No
Fiber to the Future® 47
6500 Modulator
Alphion’s standards-based ONT family brings world class features and tremendous flexibility to carrier PON deployments,while offering the broadest array of proven OLT interoperability.
For RF video deployments, Alphion integrates standards-compliant RF return capability into the ONT, giving service providersa practical solution for delivering video services to residential customers over GPON while retaining existing set-top boxes(STBs).
As part of this feature set, Alphion’s 6500 Modulator isan essential component of GPON networks withSCTE 55-1 standard based STBs and head ends.Used in conjunction with Alphion’s RF return pathcapable ONTs, such as the 1356 with integrated RFreturn path capability, Alphion 6500 Modulatorreceives upstream data from customers requestingpay-per-view or VoD services as shown in thefigure below.
6500 Modulator Features
Ethernet InterfaceThe 6500 Modulator connects to the GPON network through a 10/100Base-TEthernet interface located on the frontpanel. It meets IEEE 802.3 specifica-tions and supports full and half duplexmodes.
RF InterfaceThe 6500 Modulator connects to the headend through a coaxial connector locatedon the rear panel. This interface emu-lates the RF packets and power level tothe head end demodulator as if theyare transmitted directly from STBs. It hasa software configurable gain settingthat ensures that the receivedset-top box packet power level is properly attenuated to meet the head end demodulator input power level of 0 dBmV+/- 5 dB.
Craft InterfaceAn RS-232 DB-9 serial interface provides craft user access via the front panel, used for modulator parameter configura-tion, password administration, modulator enable/disable, and 15-minute, 24-hour or current running performancecount retrieval. All configuration parameters are preserved following power-up and reset. Supports dedicated terminalserver or Telnet sessions.
6500 Modulator
RF Return Path Modulator
Alphion1356 GPON ONT
Alphion6500
MODULATOR
Fiber to the Future®48
6500 Modulator
FEATURES AND BENEFITS
SCTE 55-1 compliantOne RU 19” rack mountableSupports multiple STBs (RPD dependent)Provides RF return capability for any 2 MHzspectrum in the 6 to 28 MHz upstreamfrequency range+50 dBmV to +24 dBmV signal captured at thedemodulator is reproduced and scaled down to atypically +19 dBmV to -7dBmV signal for input tothe head end
SPECIFICATIONS
Dimensions:Size: 1.75” x 19” x 10.6” H x W x D (44.5mm x 482.6mm x 269.9mm H x W x D)Weight: approximately 5 lbs (2.27 kg)
Environmental Operating Temperature :5 °C to 50 °C ( 41 °F to 122 °F)
Power Requirements:100V - 240V, 50/60Hz11 Watts power consumption
Compliance:Safety: UL/CSA 60950, IEC 60950,EMC: FCC PART 15, SUBPART B, CLASS AICES-003, CLASS ACE: compliantFSAN standards for three-wavelength GPONdeployments
Ethernet:1 RJ-45 connector used for network interface10 Base-T, 100 Base-TXIEEE 802.3uDual speed mode with auto-negotiation withdownshift feature1 RJ-45 LED for link activity
Craft Interface:DB-9 female connectorRS-232 serial interfacePerformance monitoring supportDisplay inventory informationDisplay configuration details
RF Interface:Modulation: QPSKData rate: 256 kbpsFrequency Range: 6 to 28 MHzBandwidth: Multiple carriers in any 2 MHz bandwidthOutput level: +19 to -7 dBmVConnector: F-typeImpedance: 75 Ohms
Ground Interface:Two ¼” ground lugs provided on the rear panel
Reset:A recessed push button switch is provided tomanually reset the unit.
LEDs:System - illuminates green and flashes when powerapplied and processor runningRF - illuminates green when RF interface isconfigured and flashes during RF transmissionFail – illuminates red when system has failedRJ-45 Port LED - indicates activity
Performance Monitoring Support:Used for troubleshooting data pathsView or clear current and previous 15 min countersView or clear current and previous 24 hour countersView or clear total running countersView all counters at once
SPECIFICATIONS
Fiber to the Future® 49
ASPL Series
ASPL SeriesGPON Passive Optical Splitter
Cost EffectiveAlphion’s family of passive optical splitters offer a cost effective solution that allows service providers to distribute content from a single fiber to multiple subscribers through a point-to-multipoint architecture facilitated through the use of optical splitters. These splitters can be arranged in a single, centralized fashion or distributed in a cascaded configuration. Since the network is purely passive, it is essential that splitter loss is kept to a minimum. Alphion’s splitter family is designed and manu-factured to insure minimal splitter loss and maintain uniformity, thereby improv-ing optical reach
Flexible ConfigurationAlphion’s ASPL series of passive optical splitters are available in a range of configurations for designing an optimized PON network. Available options include 1x2, 1x4, 1x8, 1x16, 1x32 and 1x64. For networks that employ fiber path protection, the ASPL series of splitters also include the following configurations - 2x2, 2x4, 2x8, 2x16, 2x32, and 2x64.
The ASPL series of splitters also include indoor rack mount splitter options that employ standard LGX catridges to provide 1x2, 1x4, 2x2 and 2x4 configurations.
High channel count
Superior uniformity
Low polarization dependent loss (PDL)
Rugged metallic enclosure
Wall mount / Rack mount
Protection and coiling for the input patch cord / fiber pigtail to enable proper termination
Lockable with optional padlock
Feature Summary
Fiber to the Future®50
ASPL Series
Insertion loss maximum (dB)(CR)1 x 2 4.01 x 4 7.11 x 8 10.51 x 16 13.81 x 32 17.11 x 64 20.52 x 2 4.22 x 4 7.42 x 8 11.02 x 16 14.62 x 32 17.82 x 64 20.5
Uniformity maximum (dB)1 x 2 0.31 x 4 0.51 x 8 0.81 x 16 1.01 x 32 1.31 x 64 2.02 x 2 1.12 x 4 1.22 x 8 1.62 x 16 2.42 x 32 3.02 x 64 3.6
Operating Wavelength1 x n, 2 x n 1260-1360 nm / 1480-1580 nm
PDL (dB)<0.2 (<0.3 for 2 x 64)
Return loss (dB)>55
Directivity (dB)>55
Fiber typeSingle mode fiber (ITU-T G.652)
Operating and Storage Temperature-40 to +85˚C
ComplianceTEC GR No. GR/PON-01/02-APR.2008
Connector SpecificationsInsertion loss Mated pair: 0.3 dB max
Return loss UPC: 50 dB min APC: 60 dB minFerrule material Ceramic (Zirconia)Adapter sleeve Ceramic (Zirconia)Compliance TEC GR No. GR/OFJ-02/01.MAY.2004
*The optical specifications are met without the connectors.
SPECIFICATIONS
Fiber to the Future® 51
AEMS Software
AEMSElement Management System Software
Feature Summary ApplicationsThe AEMS is a full featured Element Management System that is used to provision, configure and manage Alphion’s portfolio of FTTx products.
Scalable ArchitectureThe AEMS is based on a J2EE three-tier architecture with customized functions running on Solaris 10 or Windows. A single installation of the AEMS can support over thousand OLTs.
Network/Topology ViewAEMS provides a graphical, geographical, hierarchical view of the network elements (NEs) and the interconnecting links.
links
topology views.
AEMS’ network view facilitates simplified configuration, fault, and performancemanagement by allowing the operator to zoom in from a domain, sub-networkor ring level down to a port in one of the cards in a NE.
Configuration ManagementAEMS supports service provisioning, equipment provisioning, connection provi-sioning, and NE software image download, as per ITU-T G.984.x:
Inventory ManagementAEMS provides real time inventory management.
modules
interface is in use and which are free to be used etc.
network elementsKeeps track on any change in the network inventory and report these chrono-
logicallyariety of predefined and customizable reports on inventory
J2EE based three-tier architecture with customized functions Single AEMS supports over thousand OLTsSSL based secured communicationSecure certificate and RADIUS based access, with customizable user and profile based authorizationGraphical, geographical, hierarchical and domain based network viewPoint & click wizard based provisioningService profile managementPerformance monitoringAlarm and event monitoringSecurity management
Fiber to the Future®52
AEMS Software
Fault ManagementAEMS supports fault management functions as described in the ITU-T G.984.x standards.
alarm clear notification, before reporting a failure or restoration event to the operator
to avoid multiple alarms from a single, common source of failure
alarms, with the type, occurrence, severity, probable cause and clearing information
Alarm and Event Surveillance
of a day, week, or a month. AEMS alarm surveillance functions include:
the type, occurrence, severity, probable cause and clearing information
conditions
alarm/event type, alarm severity, day and time of occur-rence information
eventsPerformance MonitoringAEMS supports performance management functions in accor-
for Ethernet interfaces.-
rable launch time & rate
data
AEMS can schedule administrative operations to be performed repeatedly at a particular time of day. These opera-
download, performance data retrieval, operator login/logout attempts, etc.
individual elements. In this case, one software version remains active and other versions are passive.
security restrictions, and audit log is maintainedReport ManagementUser can generate and export the reports in various formats for offline sharing, recordkeeping etc.
Report generation and exportation for various types of faults, performance history, security management, inven-tory etc.
report formatsSecurityAEMS supports sophisticated and flexible security management features for authentication, privacy and fine grained access control.
recorded for audit purposes
Fault ToleranceSupports High Availability and Disaster Recovery of EMS servers, and ability to switch over between them
subnetwork ensures EMS connectivity
monitoring and local configurations
-bound interface to communicate with the AOLT-4000 System.
SPECIFICATIONS
Fiber to the Future® 53
PON.ext
PON Reach Extension System
DescriptionThe AEXT-5100 Series of GPON Reach Extension products is an innovative solution that Alphion provides to cater to the needs of FTTx service providers that require a technology / product to enable them to extend the reach of their existing Central office PON OLTs without having to put in remote OLTs to serve a cluster of subscribers. The AEXT 5100 PON.ext™ products are based on Alphion’s proprietary QLight® technology platform for the manufacturing of advanced discrete photonic integrated circuits (PICs). Because the AEXT 5100 PON.ext™ products use the same InP semiconductor technology used in virtually all telecom lasers, it is able to amplify signals at 1310 and 1490 nm, wavelengths not accessible with commercial fiber-amplifier (EDFA) technology. Due to extremely fast response time of the InP semiconductor optical amplifier inside, the PON.ext™ can accomodate both continuous (downstream) and bursty (upstream) traffic. Alphion’s proprietary approach to the incorporation of gain elements, optical filters, wavelength division multiplexers, input and output power detectors, as well as the associated control electronics for adiabatic gain control insures high and uniform performance over the lifetime of the PON.ext™.
Central Office ConsolidationAs service providers worldwide put an increased emphasis on rural connectivity spurred on by government support, they realize that cluster of subscribers are not usually within the serving area of a typical PON OLT system. For carriers faced with the option of installing and managing remote OLTs or setting up multiple small central office, the Alphion AEXT-5100 offers a cost effective alternative. The AEXT-5100 offers the ability to extend the reach of a standard PON port to 60 km thereby eliminating the need to setup multiple central offices. Even within urban areas, the use of reach extension technology allows service providers to consid-erably reduce their CAPEX and OPEX budgets by collapsing multiple central offices into a single facility.
Increased Port UtilizationThe AEXT-5100 allows service providers to deploy up to 128 subscribers on a single GPON Port thereby doubling the subscriber capacity of exisiting GPON systems. This increased capacity can be provided simultaneously with the increased reach of 60 km enabling carriers to rapidly and cost effectively increase both their reach and capacity.
Transparent all optical reach extension for all PON technologies - BPON, EPON, GPON, 10GEPON and NGPON1/2
Compliant with ITU-T G.984.6 recom-mendation for GPON reach extension
Transparent to any vendor-specific implementation of GPON frame struc-ture
Completely self configuring, Plug N Play implementation
Ability to provide 128 subscribers / PON port at 60 km reach
Utilizes Alphion QLight® semiconductor optical amplifier (SOA) technology
Utilizes 40 nm (1310 + 20 nm) optical filter in upstream direction to limit SOA amplified spontaneous emission (ASE)
Single RU chassis fits into 19” standard rack, 600 mm ETSI rack or 23” rack using mounting adapters
Redundant -48 V power supplies
Front panel access to all interfaces
Mangement via OMCI or SNMPv2
Easy Integration to third party EMS
Feature Summary
PON ext®
Fiber to the Future®54
PON.ext
DownstreamWavelength range 1480-1500 nmInput power at OLT port -23 dBm min to -15 dBm maxMinimum optical gain +23 dB port to port at -23 dBm downstream input powerMax optical gain +2 dB port to port at -23 dBm excursion downstream input powerMin saturation output +8 dBm power (3dB)Max optical noise figure +9.5 dB, at -23 dBm downstream input power+5 max ASE optical power in 1400-1600 nm range emitted from ONTs port relative to output signal power (at -23 dBm downstream input power)+9 max ASE optical power in 1200-1400 nm range emitted from ONTs port (at -28 dBm upstream input power)
Additional SpecificationsPower Supply -48 V redundantPower Consumption 30 W at room temperature; 34 W at 50˚CManagement interface 10/100-BaseT RJ-45Craft terminal USB 2.0
EnvironmentalTemperature +5˚C to +50˚CRelative Humidity 5%-85% operating and 5%-90% short-term (non-condensing)
UpstreamWavelength range 1290-1320 nmInput power at ONT port -28 dBm min to -19 dBm maxMinimum optical gain +26 dB port to port at -28 dBm upstream input powerMax optical gain +4 dB port to port at -28 dBm excursion upstream input power
Min saturation output +7 dBmpower (3dB)Max optical noise figure +8 dB, at -28 dBm upstream input power+7 dBm max ASE optical power in 1285-1335 nm range from OLT port relative to output signal power (at -28 dBm upstream input power)-4 dB max combined ASE optical power in 1200-1285 nm and 1335-1400 nm ranges from OLT port relative to output signal power (at -28 upstream input power)+2 dB max ASE optical power in 1400-1600 nm range emitted from OLT port (at -23 dBm downstream input power)
General Optical Specifications+32 dB min optical return loss looking out from OLT port into OTL or from ONTs port looking into ODNOptical connector SC/APC
SPECIFICATIONS
Fiber to the Future® 55
ONT Selection Guide
ONT Selection Guide
Fiber to the Future®56
Contact Information
Main Offi ce:
Alphion Corporation196 Princeton Hightstown Road, Building 1APrinceton Junction, New Jersey, 08550 USA
Main: +1.609.936.9001Fax: +1.609.936.9002
Africa....................................................................................africa@alphion.com
Americas........................................................................america@alphion.com
Asia...........................................................................................asia@alphion.com
Australia.........................................................................australia@alphion.com
Brazil.....................................................................................brasil@alphion.com
Europe..............................................................................europe@alphion.com
India......................................................................................india@alphion.com
Middle East...................................................................mideast@alphion.com
Sales Inquiries: