A quick tour to existing gison3dmap system installations

by CCCGeomática

Lamas de Mouro gateway to Peneda-Gerês National Park 

Located at the Lamas de Mouro entrance of the Peneda-Gerês National Park, this was the first gison3dmap system installed in Portugal, on the year 2005.It is used in the “Land Management” exhibition to present the County and part of the National Park to the visitors.

3D Model: Melgaço CountyScale: 1:15.000Vertical exaggeration: 1.5 timesDimensions: 1.46 x 1.73 mProjection system: 2 XGA InFocus projectorsMultimedia: NoneCalibration: 2DClients: ArcGIS 

Coimbra Superior School of Agriculture (ESAC) - VisuLands Project

Coimbra Superior School of Agriculture (ESAC) - VisuLands Project 

This system was used by ESAC for the VisuLands project final results public presentation, and it is currently used in the context of the forest engineering curricula.VisuLands is an international project which aims to develop visualization tools that allow the public involvement in the evaluation of landscape changes, and tocontribute to facilitate and promote a larger and better public participation in planning and in the definition of landscape related policies. In Portugal, the case study area was the Arganil County, for which a projective and prospective analysis of county land use was developed considering a 100 years time frame.

Model: Arganil countyScale: 1:25.000Vertical exaggeration: NoneDimensions: 1.47 x 0.76 mProjection system: Mobile with one XGA projectorMultimedia: NoneCalibration: 2DClients: ArcGIS and mmon3dmap 

Serra da Estrela Interpretation Centre (CISE)

Serra da Estrela Interpretation Centre (CISE)

System integrated into the permanent CISE exhibition, in the area dedicated to the Serra da Entrela Natural Park. CISE is open to the public since March 2007. 

Model: Serra da Estrela Natural Park and Seia countyScale:1:35.000Dimensions: 1.47 x 1.47 mVertical exaggeration: 1.5 timesProjection system: 2 XGA Sanyo PLC XU86 projectorsMultimedia: Touch screen and video projectionCalibration: 2DClients: ArcGIS and mmon3dmap 

Herdade da Contenda

Herdade da Contenda 

This system was used in the Portuguese Forest Agency booth at Expocaça 2008 (Santarém - May, 9-11), at Feciex 2008 (Badajoz – September, 18-21) and at Ovibeja 2010 (Beja, April 28 - May 2), to promote Contenda, a 5270 hectares property, with a deer population exceding 3000. 

Model: Herdade da ContendaScale: 1:5.500Vertical exaggeration: NoneDimensions: 2.01 x 1.56 mProjection system: 4 XGA Sanyo PLC XU86 projectorsMultimedia: NoneCalibration: 2DClients: ArcGIS and mmon3dmap 

Companhia das Lezírias Interpretation Centre 

System used for the promotion of the Companhia das Lezírias agricultural, forest and touristic activities. Opening to the public pending from the conclusion of the interpretation centre construction work. 

Model: Charneca propertyScale: 1:10.000Vertical exaggeration: 2.5 timesDimensions: 2.02 x 1.58 mProjection system: 4 XGA Sanyo PLC XU87 projectorsMultimedia: Touch screen and LCD screenCalibration: 2DClients: ArcGIS and mmon3dmap 

Terceira Travessia do Tejo Exhibition (Third Tagus river crossing) - RAVE

Terceira Travessia do Tejo Exhibition (Third Tagus river crossing) - RAVE

This system was installed between October 2008 and February 2009, first at the Gare do Oriente, in Lisbon, and later at Barreiro town, as part of the TTT project public presentation, for the high speed train network (RAVE). 

Model: Lisbon Metropolitan AreaScale: 1:31.000Vertical exaggeration: 3 timesDimensions: Circular with 2.4 m diameterProjection system: 4 XGA Sanyo PLC XU106 projectorsMultimedia: Touch screen and soundCalibration: 2DClients: ArcGIS and mmon3dmap 

Castro Marim"Revelim de Santo António" Territory Interpretation Centre (CITRSA)

Castro Marim"Revelim de Santo António" Territory Interpretation Centre (CITRSA)

This system was installed at the "Revelim de Santo António" Territory Interpretation Centre, in Castro Marim, Algarve, on August 15, 2008. CITRSA is a virtual belvedere to the Castro Marin county, which invites visitors to depart on the discovery of the county territory, its heritage, people and knowledges.

Model: Castro Marim countyScale: 1:10.000Vertical exaggeration: 1.5 times Dimensions: 2.6 x 2.0 m Projection system: 4 XGA Sanyo PLC XU106 projectorsMultimedia: County video shown on 4 LCD screensSound: Audioguides in Portuguese, English, Spanish and FrenchCalibration: 3D manualClients: ArcGIS, VisualSIG and mmon3dmap 

Batalha County Community Museum (MCCB)

Batalha County Community Museum (MCCB) 

System integrated in the MCCB permanent exhibition, in the area "All about us“. It invites users to know more about the county touristics routes, such as the religious and historical monuments, the geologic and natural areas, the gastronomic specialities and the community activities.The Museum is open to the public since February 2011. 

Model: Batalha countyScale: 1.10.000Vertical exaggeration: 1.5 timesDimensions:1.81 x 1.69 m with irregular cutProjection system: 3 XGA Sanyo PLC XU106 projectorsMultimedia: Touch screen and LCD screenCalibration: 3D manualClients: ArcGIS, VisualSIG and mmon3dmap

Parques de Sintra Monte da Lua - Sintra 3D

2,12 x 1,80 m

Parques de Sintra Monte da Lua - Sintra 3D

Parques de Sintra Monte da Lua - Sintra 3D 

System integrated into the permanent Sintra 3D exhibition, open to the public since April 2011. The visitors can learn about the Serra de Sintra, the CulturalLandscape of Sintra (a World Heritage Site), and the company activities.

Model: Cultural Landscape of Sintra - World Heritage SiteScale: 1:3.000 Vertical exaggeration: 1.2 times Dimensions: 2.12 x 1.80 mProjection system: 4 XGA Sanyo PLC XU106 projectorsMultimedia: Touch screen kiosk and 2 LCD screensCalibration: 3D manualClients: ArcGIS, VisualSIG and mmon3dmap 

Guimarães County Master Plan System

Guimarães County Master Plan System 

Installed in the beginning of July 2011, the initial purpose of this gison3dmap system is the presentation and public discussion of the county master plan revision.It will be also used as a communication tool integrated in the activities of the European Capital of Culture 2012.

Model: Guimarães countyScale: 1:10.000Vertical exaggeration: 1.5 timesDimensions: 2.33 x 2.08 mProjection system: 2 FullHD Mitsubishi FD630U projectorsMultimedia: Touch screen kiosk and 2 LCD screensCalibration: 3D automaticClients: ArcGIS, VisualSIG and Powerpoint 

Cascais County Urban Information Centre 

This system will be used for touristic purposes and for the presentation of development and environmental projects, such as the county ecological chart. 

Located next to the Cascais County building, in downtown Cascais, the Cascais County Urban Information Centre is expected to be open to the public in November 2011. 

Model: Cascais countyScale: 1:7.000Vertical exaggeration: 1.5 timesDimensions: 2.51 x 1.93 mProjection system: 3 FullHD Mitsubishi FD630U projectorsMultimedia: Touch screen kiosk and 2 LCD screensCalibration: 3D automaticClients: ArcGIS, VisualSIG, Powerpoint and mmon3dmap 

Ponte de LimaBertiandos and São Pedro d’Arcos Lagoons Interpretation Centre 

The system will be used in environmental education and training of this natural protected site.

Model: Ponte de Lima countyScale: 1:10.000Vertical exaggeration: 1.5 timesDimensions: 2.02 x 2.80 mProjection system: 4 XGA Sanyo PLC XU106 projectorsMultimedia: Touch screen kiosk and 2 LCD screensCalibration: 3D manualClients: ArcGIS, VisualSIG and Powerpoint