View
437
Download
1
Embed Size (px)
Citation preview
www.smthelp.com
Perfect solder joint, step 1 of 4
•Hold the iron touching one of the pads for a count of one•Make sure to touch the side of the iron tip to the pad, not the actual tip of the iron
www.smthelp.com
Perfect solder joint, step 2 of 4
•Feed a tiny bit of solder onto the pad while continuing to hold the iron to the pad•Feed enough solder onto the pad to cover the pad, but no more
www.smthelp.com
Perfect solder joint, step 3 of 4
•Continue to hold the soldering iron on the pad and pick up your component using the tweezers with your other hand•Make sure the tweezers are making contact only with the sides of the component that do not have leads, otherwise you may get your tweezers in the solder
www.smthelp.com
Perfect solder joint, step 3 of 4
•Continue to hold the soldering iron on the pad so the solder stays liquid•Slide the component into the solder from the side while keeping the bottom of the component flat on the PCB•Make sure you slide the component far enough into the pad so that the pad on the other side of the component is at least half exposed
www.smthelp.com
Perfect solder joint, step 4 of 4
•Continue to hold the component on the pad with your tweezers and remove the soldering iron, wait for the solder to solidify and then remove your tweezers
www.smthelp.com
Oops.
•If you don’t slide the component in from the side you may wind up with a component that does not touch pads on both sides•If this happens just reflow the solder on the first join and replace the component
www.smthelp.com
Here’s How to Use Solder Wick
•Apply flux to the solder you want to remove•Place the solder wick on top of the solder you want to remove•Sandwich the solder wick between the solder and your iron until the heat sucks the solder into the wick
www.smthelp.com
Features:
- Pneumatic operating, no electronic
- Used for cleaning solder paste, glue,etc
- Whole machine using 304 Stainless steel
- Cleaning in closed-loop, lower consumption
- One-button operation
S-1688 Stencil Cleaner
www.smthelp.com
Simple operation
3 steps to operate:
—- set cleaning time
—- set Drying time
— press START
www.smthelp.com
Cleaning Flow Chart
Press START
Spray nozzle work
2mm/1mm Filter
Pump Pressure work
Pump Liquid
Cleaning Mesh
Liquid pass filter
www.smthelp.com
SpecificationsApplication stencil,glue screen ,copper screen
Application stencil size Standard 29 inch and below
Clean liquid capacity Max 50L ,Min 20 L
Cleaning fluid volume 40L
Cleaning mothed Rotary double side pressure injection and high pressure air praying ( cleaning and drying )
Clean time 2~4 min(stencil and copper net)
Rinse time 2~4 min(stencil and copper net )
Dry time 2~5 min
External air supply 0.4Mpa~0.6Mpa
Air consumption 400~600L/Min*2
Air outlet size Φ125*25mm
Weight 320Kg
Dimension 980mm(L)*700mm(W)*1730mm(H)
Tin filter mothed Three class filter(10μm,5μm,1μm)
www.smthelp.com
Welcome inquiry
1,Please visit : www.smthelp.com
2, Find us more: https://www.facebook.com/autoinsertion
3, Know more our team: https://cn.linkedin.com/in/smtsupplier
4, Welcome to our factory in Shenzhen China
5, See more machine working video, please Youtube: Auto Insertion
6, Google: Auto+insertion, to get more informations
7,Looking forward to your email: [email protected]