Top Reasons why Your Garage Door Won’t Work

Contrary to what most homeowners believe, garage doors are not immune to

problems. In fact, a good number of us will take them for granted since they seem

quite durable and so we can use them for many years. However, when a breakdown

occurs, it takes place at a time none of us expected and often, it comes as a shock

to many.

So in order to stay away from such crisis, look out for these frequent reasons why

garage doors often stop working. Don’t forget to involve a garage door repair

expert if the problem is extreme or complicated.

Bent doors:

Garage doors bent often. A common course for this is when cars roll into the door

or the track gets out of alignment. In addition, when you try to close the door yet

something else ends up blocking up the way, the door will possibly bent.

Aluminium and steel doors tend to be the most vulnerable:

To get rid of the problem, you must straighten the door and ensure the metal track

the door runs on is properly aligned. In situations where the door bends

excessively, then you may need to replace the panels and slats. Remember to seek

garage door repair service if you can’t do that on your own.

Faulty door opener:

Automatic doors with electric openers tend to be the most vulnerable. Often, when

this happens, the door will develop complications that will result into the failure of

the garage door to either close or open.

The main cause of the problem is basically the failure of drive motor/ electric circuit

to control either the remote control or safety sensors.

When you experience such a problem, it’s highly recommended that you seek

garage door repair services of a specialist with plenty of skill and experience.

Jammed locks:

Locks form an essential part of the garage door. However, they often jam from time

to time. The good news is that there are spares available which cater for almost all

types of locks.

So all you have to do when such a thing happens is to purchase a new one and

replace with the jammed lock.

Alternatively, you can also take the lock to overhead door repair expert who will of

course repair the faulty part.

Misaligned photo eye:

Each side of your garage door boasts a photo eye. Between the photo eyes, there’s

an invisible beam. However, when the beam is broken, it will prevent the door from

closing.

If you door refuses to close, then check to ensure that the photo eyes are neither

misaligned nor dirty. If they are, expect such problems to occur.

Failed mechanism:

When a garage door is unbalanced, it can be quite noisy and after some time, stop

functioning. Try raising the garage door halfway before releasing it. If it’s stable, it

won’t move much, but if it’s unbalanced, it will definitely start to fall.

Garage doors are usually balanced by springs and weights. With time, they’ll break,

probably due to loss of tension. In addition, it can also be counterbalanced by a

system of weights and cables.

Well, here you’ll need overhead door repair services in order to correct the

problem.

There are plenty of other reasons behind your garage door refusing to work. Apart

from the aforementioned, the others include:

• Powerless transmitter batteries

• Failure to keep the working mechanisms adequately lubricated.

• Wiring problems, especially with the remote control.

So there you have it. While it’s important to run the troubleshooting tests to see

what exactly might be wrong and try to correct it, some of the conditions will

require the assistance of a professional. Garage Door Repair Tulsa is a garage door

repair service company with great technicians and resources to handle even the

most advanced of tasks. Check them out to see how they can assist you with your

problem today.

Call us (918) 856-5754 for any types of garage door repair services in Tulsa. Visit:

http://www.garagedoorrepairtulsa-ok.com/