Embed Size (px)
DESCRIPTION
Case Study: Existing roof with a failed waterproof membrane causing water to penetrate rooms below. Spray applied Liquid Rubber can be used to over coat existing membranes rather than going to the expense and inconvenience of complete removal. This was successfully achieved by careful preparation and experienced application of cold spray application of a liquid waterproofing membrane.
Citation preview
PROBLEM: FAILURE OF EXISTING TORCH-ON SHEET MEMBRANE
Case Study:Roof Remedial Waterproofing
SOLUTION: SPRAY APPLIED LIQUID RUBBER MEMBRANE OVER EXISTING MEMBRANE .
• Joints, junctions & turn ups delaminated
• Water leaks & subsequent damage to rooms below
This provides a seamless & flexible waterproof membrane without the need to remove the existing damaged surface.
The defective existing roof membrane prior to remedial work
The defective existing roof membrane prior to remedial work
Preparation: masking & detailing of existing delaminated joins
Preparation: masking & detailing of existing delaminated joins
Preparation: masking & detailing of existing delaminated joins
Fast spray application of Liquid Rubber covers existing membrane
Fast spray application of Liquid Rubber covers existing membrane
Liquid Rubber membrane replaces existing torch-on membrane
Seamless & Flexible Waterproofing Membrane
ABOUT LIQUID RUBBER
Liquid Rubber
ABOUT RUBBER MEMBRANE SYSTEM
Liquid Rubber is designed to "hold" water and will not break down, like most conventional membranes often do.
We further wish to advise that the Liquid Rubber Membrane System is SEAMLESS as it is sprayed out in one continuous layer - which does not leak after a period of cyclic movement.
Liquid Rubber unique properties
• One coat system• Minimal surface preparation• Environmentally friendly• Non-Toxic• Odourless• High Puncture Resistance• Seamless - no laps• Fully Bonds to most substrates• Does not track• Ozone and UV resistant
Liquid RubberPerformance Benefits
Superior Performing Membrane• Bonds to most construction materials• Seamless membrane- moves with substrate• Against corrosion, water damage, chemical attack• Elongates 800% with 95% recovery • Withstands thermal cycling• Puncture resistant
Significant installation cost savings for customer• Minimal surface preparation required • One coat system
Environmentally friendly and safe• VOC free• Non toxic
Phone: 03 8812 2918
Website: www.waterproofingfew.com.au
Email: [email protected]
F.E.W Waterproofing areAustralian Certified
Liquid Rubber Applicator
