Embed Size (px)
DESCRIPTION
Commercial carpet cleaning companies employ different cleaning methods. Some use wet cleaning while other prefer dry cleaning method. It would depend on several factors such as the type of equipment they used, the amount of dirt and grime and whether there are stubborn, visible stains that needs to be eliminated. Each method has its own pros and cons. Find out which carpet cleaning method works best for you.
Citation preview
Common Carpet Cleaning Methods Explained
Commercial carpet cleaning companies employ different cleaning methods. Some use wet cleaning while other prefer dry cleaning method. It would depend on several factors such as the type of equipment they used, the amount of dirt and grime and whether there are stubborn, visible stains that needs to be eliminated. Each method has its own pros and cons. Find out which carpet cleaning method works best for you.
Wet Cleaning
By the name itself, wet cleaning involves the use of water. Steam cleaning and hot water extraction are both wet cleaning methods of carpet cleaning. A chemical reagent is initially applied to the carpet to loosen hardened dirt and oil-based substances. After which, high pressured water or steam is applied to thoroughly remove the chemical dirt and grime.
Foam Cleaning
Foam cleaning involves applying shampoo to the carpet using a rotating brush and working it to make a foam. It is then left to dry for about an hour or more. It will then crystalize when dry, with the loosened dirt particles encapsulated into the powder crystals. The carpet is then vacuumed and could be followed by steam cleaning. This method is considered more environment friendly because it leaves lesser chemical residues. However, this is not advisable for carpets that are heavily soiled.
Dry Cleaning
Dry cleaning, also called as dry powder cleaning, does not use water. Instead, a powder consist of detergent, solvent and a small trace of water is sprinkled all over the carpet’s surface using rotating machines. It is then left for about 15 minutes to let the powder dissolve the dirt. It is then vacuumed together with all the dirt and particles dislodged from the carpet fibers.
Bonnet Cleaning
Bonnet cleaning is usually for light cleaning and routine maintenance. It starts with vacuuming the carpet, followed by spraying of a chemical solution using an electric sprayer or hand pump to break down the dirt. The solution is then left for a period of time. An absorbent pad or bonnet placed on the drive block of a rotary floor machine, is spun over the carpet surface at a speed between 100 and 300 rpm. This will result to increase absorption of the chemical solution and the displacement of dirt and grime.
Contact Us
Superior Janitorial & Vending +1(281) 389 0242 [email protected] Kingwood, Houston, Texas, 77339 USA https://www.superiorjanitorialtx.com
