Standard problems and solution of canon printers

Canon printers have been consistently efficient and reliable, and they have let us experience a whole new world of printing. In this article, you would get to know about fiveusual problems of Canon Printers and their solutions.

Here are five common short-listed problems of Canon Printers:

1. Printer works too slow: Many of you must have this complaint that your Printer tends to work too slow. Here is a perfect solution to this problem.

Solution: It is always good to reduce the print quality of the printer for the daily output. The speed of the printers vary from models to models but here is a quickmethod to switch to the Draft mode. Select Printer and then Properties. Find an option that says Reduce the Print quality. The settings after Properties depends on the model of the printer. You would find the choices in the Main menu itself. Just reduce the quality of print and also add RAM to your printer. Adding RAM wouldalso help in solving the issue.

1. Prints are too light, uneven and have horizontal lines: All of you must have experienced your print-outs to be very light, spotty and with horizontal lines, it is a common problem, but it can cause havoc in your experience of printing.

Solution:You sometimes, tend to get patchy and non-uniform prints, it happens when you do not use your printer quite often. There are certain steps which, if you follow, you would never have this problem back again. From the Windows 7 start menu, click on Devices and Printers or Control Panel, and find your printer’s utility application. Also, please try to use your printer more frequently, so that it is in use and the quality does not get diminished.

2. Paper Tray is fragile: Quite often, vendors include low-capacity paper tray, to cut cost.

SOLUTION: All you can do is while purchasing a printer, analyze the paper tray carefully. If you think it is easily breakable, wisely go for buying another model. Examine the paper tray as per your requirement, do not choose a smaller plate printer, if your needs are of a higher capacity paper tray.

3. FITTING OF MORE TEXT ON ONE PAGE: Like, the page quantity matters, the same way for print speed the amount of text and graphics used is also essential. By formatting two document pages on a single sheet, you can slice the time in half. To overcome this problem, follow certain steps:

Choose Print Then, click on Properties. The next step would depend on the model of your printer. For Eg: In some printers, there is an option for Layout/Watermark, click on it, and select

two pages per sheet.

4. PAPER JAM IN THE PRINTER: Paper Jams occur when a tiny piece of paper gets stuck in the mechanism of paper feed. In this case, you must always take the paper out of the tray and open all the flaps and try to look inside with a torch. To examine and clean the paper feed mechanism, look underneath the printer to find an access panel that can is removable.

These were some of the common problems of Canon Printers, and their solutions, so that it is of great help to you.

If you have required canon printer customer service phone number or canon printer drivers support phone number click here