6 Steps To Refinish Wood 6 Steps To Refinish Wood Gym Gym

Floors ProperlyFloors Properly

Instead of replacing the scratched floor, they can be refinished over and over again.

1. The gym floor must be thoroughly cleaned before the refinishing process is to begin.

2. Place 20-grit sandpaper into a drum sander,plug it in and allow the sander to move

forward across the surface to be treated.

3. Take the disc sander & run it over the areas of the floor the drum sander could not reach, such as corners of walls.

4. Place the 50-grit sandpaper into the drum sander. Cover the entire floor with the

sandpaper. Remove all dust with a big sweeper.

5. The final step is to apply the stain to the floor with a rag. Have the stain set into the wood for at least 8 hours.

6. Apply the final coat of sealer and Wait 2 days before using the floor.

Gymsportsflooring.Com