Sleep-N-Play Bassinet Cot & Nappy Changer & Toys

Quick Installation Guide

Assemble The CotStep 1 – Take out the bed frame from the carry bag..

Assemble The CotStep 2 – Push out the side frames. Grab and life up the central arms at shorter

sides till they “click”

Assemble The CotStep 3 – Repeat step 2 at longer sides.

Assemble The CotStep 4 – Push the central units to the bottom. Check the frame and all sides are

firmly secured. If not, re-do.

Assemble The BassinetStep 1 – Roll out the fabric, insert the 4 steel tubes into 4 pockets at each ends

Assemble The BassinetStep 2 – Place the slim mattress sheet over the steel tube bars.

Assemble The Nappy ChangerStep 1 – Take “U” shape steel tubes and thread through the pockets at the rims

of the changer.

Assemble The Nappy ChangerStep 2 – Take note of the male/female locks at each end of the tube.

Assemble The Nappy ChangerStep 3 – Mount the 4 plastic stands at the right location around the frame.

Assemble The Nappy ChangerStep 4 – Mount the changer.

Disassemble The CotStep 1 – Remove all items in the cot. Press the button and pull the handle at the

central unit

Disassemble The CotStep 2 – Reverse the assembly process by pushing the 4 middle locks and

disengage the frame.