HOSEKI JEWELRY Make all the jewelry shine and gloss

Quickly and risk-free for stones and inlays

Odorless, no noise, and no physical contact

WHAT IS IN THE BOX

Components of the HOSEKI

device

1. 1 airtight container and its

cover

2. The HOSEKI device

3. 1 transformer

4. 1 cable

5. 1 steel rod

6. 1 hook and 1 alligator clip

7. 1 250ml bottle of HOSEKI

concentrate

HOW TO USE 1/5

Prepare the liquid

1. Fill the container with 750 ml of demineralised

water (do not use any other water because it

might alter the efficiency of the device or even

damage the jewels

2. Add 40 ml of HOSEKI concentrate, as written

on the bottle

3. Mix the whole thing until it becomes even

HOW TO USE 2/5

How to turn it on

1. Make sure the HOSEKI device is off

by pressing 0 (see a on the picture)

2. Connect the cable (4) on the Hoseki

device in (b)

3. Then connect the transformer (3) in

(c)

HOW TO USE 3/5

PICTURE A

1. Connect the cable like shown in the

center outlet of the HOSEKI

deviceBrancher.

2. Then connect the plug (black cable)

in the steel rod

3. Finally, connect the socket (white

cable) at the end of the silver hook.

PICTURE B

Hang the rod steel like shown. It should

be as deep as possible in the liquid.

PICTURE C

The device is ready for use. The green

light (in the middle) is on.

C

A

B

HOW TO USE 4/5

Clean the jewels

1. Hang the jewel on the silver hook

2. Submerge the jewel in the HOSEKI

concentrate. The orange led(on the left) turns

on. The cleaning process will start

automatically. Keep the jewel submerged in the

HOSEKI liquid. After 10 seconds, the orange

led will turn off.

3. Take the jewel out of the HOSEKI concentrate

and rinse with water 2

1

3

HOW TO USE 5/5

1. Once the jewels are cleant, carefully close the container with the

provided cover. It is airtight so it doesn’t matter if the container

falls upside down. Let the liquid rest for a few hours. One can

observe a deposit at the bottom. These are small dirts from the

cleant jewels.

2. Pour carefully the clear liquid in another container without

shaking it. Throw awa the deposit, rince and dry up the container.

Transfer the HOSEKI concentrate back in its container.

3. You can use the liquid again to clean other jewels or keep it for

the next use.

Eventually, you will still have to change the HOSEKI liquid when you notice that it

doesn’t become clear anymore even after a few hours of rest.

To keep your HOSEKI concentrate longer, here are some tips:

IMPORTANT

- Keep the device away from the container with the HOSEKI

concentrate when it’s ON, it is recommended to place the device on a

higher level than the container.

- Unplug the transformer as soon as the cleaning is done.

- Rinse well the hook and the steel rod with water after each use.

- Store all the accessories only when they are dry.

- ONLY use the HOSEKI concentrate with the HOSEKI device. Any

other liquid (particularly the ones for the ultra-sound devices) may

gravely damage the jewels.

WARNING

- Never submerge the HOSEKI device or put it in contact with

any liquid.

- Do not drink the HOSEKI concentrate, whether pure or not.

- Keep the device and the liquid out of reach of children

- This is not a toy but a tool for professionals. Therefore, the HOSEKI device

must be handled by professionals ONLY.

REMINDERS 1/4

- A 250 ml bottle of HOSEKI concentrate supplies 60 to 120 days

even for an intensive use of the HOSEKI machine. As a

consequence, the cost of each cleaning is very low.

- HOSEKI is odorless and does not make any noise. It is

therefore a perfect fit for a use in your store.

- HOSEKI concentrate does not stain.

- The HOSEKI device is equipped with its own breaker in case

the steel rod and the hook would be in contact. In this case, it is

not required to reboot the device, the cleaning will resume

automatically.

REMINDERS 2/4

The warning lights:

- Orange (d) : proceeding (about 10s for one cycle)

- Green (e) : device connected

- Red (f) : trouble. Turn off and turn back on the device

- The provided container is totally airtight, even when it’s

upside down.

- The hook where the jewels are hang is made in silver. It

is flexible and can be easily bent. Handle with care.

REMINDERS 3/4

- The HOSEKI device cleans gold as well as

platinum, silver and plated gold.

- The HOSEKI device doesn’t make any ultra-

sounds, therefore it cannot unseal nor damage any

stones or crystal inlays.

- The electrolysis from the HOSEKI device requires a

pH of 9.5 (a toothpaste has a pH of 10). It means it

is slightly alcaline et cannot damage any stone

such as lapis lazuli, turquoise, coral and pearls.

- The HOSEKI device gives great results on

diamonds, emeralds and ruby.

REMINDERS 4/4

- The device is delivered with an alligator clip

which can be used with items that can’t be

hang on the silver hook.

- During the process, it is absolutely normal to

notice some bubbles around the hook and

the jewel.

- The HOSEKI device has a 1-year warranty

MANUFACTURE

• The HOSEKI device is made in Taiwan,

based on a japanese design: « hoseki »

means « gemstones » in Japanese

• The shell is a single piece of aluminum

tailor made to make it strong and resistant

to the rust.

• The electronic componants and the

assembly are made in TaiwanLes

composants électroniques et l’assemblage

viennent de Taiwan, well known for their

skills in this field (i-phone, i-pad, HTC…)