4

Click here to load reader

Diy small air compressor with active cooling

Embed Size (px)

DESCRIPTION

You might say “Another DIY Compressor?” – but it’s not just the same thing. Usually if you make one yourself it will take some space at your work place and using this space in your home premises is just out of question. This is actually the reason this fella has been build.

Citation preview

Page 1: Diy small air compressor with active cooling

airbrushdoc.com http://airbrushdoc.com/tipstricks/diy-small-air-compressor/

DIY Small Air Compressor With Active Cooling

You might say “Another DIY Compressor?” – but it’s not just the same thing. Usually if you make one yourselfit will take some space at your work place and using this space in your home premises is just out of question.This is actually the reason this fella has been build.

Well we all know that compressor without tank wouldn’t take much space but what if we want to have a tankanyway? Air tank in combination with regulator is giving so much pros comparing to compressor without itthat any professional will tell you that he will go for the compressor with tank only.

Author of this build has started with the schema. We will not go into deep details – what and how exactly andwhy it was done because I have written about this before. If you need some more details I recommend you toread diy air compressor or silent diy compressor.

By the first sketches I have planned to fit everything on the base not bigger then A4 page size. Small isn’tit? As tank I have planned to use two small oxygen cylinders of same size. Unfortunately it wasn’t easy to findtwo same sized cylinders but I’ve found a small receiver from refrigerator, maybe a little bit too small butstill good enough for the purpose.

As the name says it had to have an active cooling (bigger fan) so smaller size of the tank even helped.Why active cooling? As the receiver is smaller the compressor will switch on more often and also “just to besure” it’s not overheating.

With the fan I had no luck in any DIY shop but thanks to a local PC shop I got exactly what I wanted (evenbetter than I’ve planned).

Now I need just an air compressor. First I went through all local stores that sell this kind of items. I wasshocked by the prices. So the only place I could go was a repair shop of my friend where he had two sparecompressors lying on the floor (literally). They didn’t have any value for my friend as they didn’t jump on frompressure difference more than 45 psi. These days they just throw these compressors away but before theywere fixing them.

So this is how I got the main parts. What more did I need? After looking through some materials and info onInternet I decided to use regulator and needle valve . As connection between each component I’vedecided to use copper pipes.

Page 2: Diy small air compressor with active cooling

To connect tank and compressor I’ve used welding machine. After all these parts were connected I had todeal with electronics. This was my week point. The compressor didn’t want to jump on properly. Relay wasmaking terrible sound as it was switching a few times in 1 second. Then it started and went off again justbecause the moving contact of the relay sticked to the static one. The current was raising and relay switchedoff the whole device.

As I found out later on, this kind of the compressor needs longer period to start and a classic relay can’t beused in this case. The only solution here was to use original relay for this type of compressor. But I didn’thave it and couldn’t get it anywhere.

I had to find out how to close the circuit for at least 0.4 sec and then ensure it goes off. Then I’ve foundsomething in my own collection that I bought a few years back to provide soft start of electric motor and couldswitch the working regime to star-triangle (Electricians know what that means). It is called “Time Relay”

That way the compressor gets whole second to start which was enough. Now all I needed was a pressureregulator. I found a relay from hydraulic pump. It needed some tweaks as it was switching off at about 75psi. Ijust changed the spring and the bolt inside of it.

That’s was it. Ans here is the finished device.

Page 4: Diy small air compressor with active cooling

Another nice build of air compressor for all airbrush artists or DIY enthusiasts. If you like it don’t forget tocomment or tweet it, like it and give it a plus. In one word – “SHARE”.

Author: igrek_30, Surce: Scale Models