New Energy for an Ultra-modern Vietnam

Part 3: The ScienceSection B: Techniques

June 2014

To discuss this presentation and pose any questions you may have, please visit our website,

www.nangluongmoisaigon.org

Now that we’ve looked at some of the

environmental factors affecting ZPE systems,

let’s look at some specific ways to achieve

quantum coherence

High Voltage is a common element in many ZPE systems

• Remember that according to Gauge Theory, it’s not costly to adjust voltage up or down

We generally want to pulse voltage in a system

• Faster pulsing often results in greater ZPE extraction

Pulsing the voltage using specific wave forms can be important

• Square waves, step waves• Other resonant waveforms

The Meyer Waveform

The sound of Stanley Meyer’s fuel cell

Specific frequencies produce specific effects

• We can see how Solfeggio frequencies affect the formation of ice crystals

It’s easy to see, then, how certain frequencies can spur the formation of charged gas and water clusters

Remember that these clusters are capable of holding much more ZPE than random, unclustered molecules

To make a comparison to politics, individuals working alone are not likely to create political change.

But when they form into a cohesive group structure, they can have tremendous power to effect change

Many successful inventors have looked to nature to find frequencies that “work”

• The frequency at which photosynthesis occurs, the Solfeggio frequencies, Schumann frequencies, etc. may all be useful for different applications

Some tips on working with plasmas for ZPE extraction

Pulsing the plasmas into the system (just as we pulse voltage) can help extract ZPE

• Often, it is the combination of forces that makes a system successful

• Therefore, you might try pulsing both plasmas and voltage simultaneously

Creating plasma waves can work well

• Remember that resonance is key here• Try to make each successive wave bigger and

bigger by taking advantage of resonance• Remember the analogy of timing your pushes

just right when you push a child on a swing to make it swing higher and higher

Plasma Waves

Create plasma vortexes

• Torsion physics tells us that a toroidal (spinning) wave is much stronger than a standing wave

An example is the Beltrami vortex• Some scientists believe the proton is a ring-

shaped vortex

We see ring vortices around some galaxies

• Some of the most successful ZPE systems imitate nature!

We can use plasma vortices to create vortices of…

• Ions• Charged Water Clusters• Inert gas

There are tools like the trisops which can help you create plasma vortices

One way to imitate nature would be to vertically arrange symmetrical vortices

Try creating vortices in liquids of varying viscosities

• Mercury has been used in this way to create antigravity effects

• Even cooking oil has been used successfully

Moray King recommends layering vortices(A vortex acting on a vortex acting on…)

Throughout all your system designing, keep in mind that the torus with two vortices (at the

north and south poles) is a fundamental energy structure in the universe

Micro-lasers can help you stimulate plasmas and create vortex action

Remember that you can pulse your laser light at specific frequencies (and also at specific

wavelengths of light) to create energizing effects

Separately or in conjunction with plasmas, you can experiment with the use of tori in your systems

We’ve already seen in Torsion Physics that the torus is a basic energy structure used

throughout the Universe

Some New Energy scientists have improved system efficiency by placing an EM toroidal coil under their system

Others have put the coil on

top

You could also place one or more toroidal coils around your system

Experiment with single and double toruses

Energy in your torus could flow vertically…

…or, it could be given a twisting motion to increase the vortex effect

Haramein has suggested a system design that has two tori passing energy back between

each other in perpetuity

Explore the effects of counter-rotating toroidal coils

As well as of toroidal coils rotating in unison

You may wish to fill your tori with something

• Ions• Plasma• Inert gas• Mercury (Hg)• Water• This is one way to play with electron spin and

mass

Prof. Watanabe, in particular, has studied how toroidal confinement plasmas can

rapidly achieve quantum coherence

You can combine

pulsed high voltage with

your tori

Many scientists have found that Tesla-wound bifilar wire gives better results in torus systems

Scientists in Nazi Germany found that they could produce interesting ZPE effects by

combining magnets with rotating toruses

John Searl and others have found that rare earths (like neodymium) make some of the best

magnets for New Energy applications

Therefore, a country would be wise not to sell all of its rare earths to foreign buyers

Many magnet motor experimenters find that the key is to create an asymmetry in the magnetic

fields of a system so that its imbalance keeps the system running more or less perpetually

Here is an example of a “piston-type” magnet motor setup from Korea:

Some magnet motor designers run into the problem that there are magnetic fields where

they don’t want them

To overcome this problem, you can use iron and aluminum plates to create a magnetic shielding effect

Tim Ventura points out that if you spin magnets quickly enough, like poles will stop repelling

One of the “tricks” to getting magnet-based systems to work seems to be quickly

switching the attractive and repulsive forces

Possibly, an oscillating magnetic shield could create this effect

Turkish engineer Muammar Yildiz’s magnet motor is now under testing

Besides magnets, ions can help you effectively extract energy from the

vacuum

We know from quantum electrodynamics that heavy ion collisions can create

quantum coherence

By modulating density during plasma creation, you can create ion acoustic waves which raise the energy level of your system

Watanabe et al. have shown that ion acoustic oscillations increase radiant energy

absorption and create runaway electrons with anomalous heat

Aspden found that pulsed ion discharges into water create huge explosions

Graneau showed that electric arc currents through salt water could produce ion acoustic wave activity

This process produced vacuum polarization of atomic nuclei and, from this, an overunity effect

Puharich also found that in electrolysis of water where the voltage is pulsed in a frequency resonant with that of the water molecule’s

bonds, ion oscillations will develop

Besides ions, you can use water cavitation to extract ZPE from the quantum vacuum

In order to do this, you need to have water with a high concentration of Charged Water Clusters (CWCs)

http://phys.org/news/2011-06-scientists-dielectron-nano-droplet.html

CWCs are clusters of water molecules that have assumed highly energetic geometric bonds

http://en.wikipedia.org/wiki/Water_cluster

The bonding together into these crystalline forms is a result of being placed into a highly

energetic, quantum-coherent state

http://chemistry.lsu.edu/People/Faculty/Randall%20Hall/item1084.html

Vortex activity in the system can

help the formation of CWCs

http://www.pillaroflight.net/HowItWorks.html

Cavitation can extract ZPE by getting a water bubble containing CWCs to collapse against a hard surface

ZPE from water cavitation

• The collapsing bubble forms a re-entry jet• The re-entry jet squeezes the water crystal,

which assumes a ring form• The toroid form of the bubble contains

tremendous energy which is released in an explosion similar to a miniature H-bomb

There are many ways to cavitate water

• Electrolysis gas through a narrow gap• Blowing air• Venturi vacuum

Many ways to cavitate water

• Mechanical vibrations• Oscillate electrical field– Toroidal coil– Pulsed waveform

Also, you can use sonic and ultrasonic acoustic waves to cavitate water

• Stringham used sono-cavitation to create microscopic bubbles which would then crash into metals and create lots of anomalous heat

Zero Point Cavitation Expert Mark LeClair warns to keep a safe distance from the cavitation-induced reactions

• There is a risk of radiation poisoning!

• Fusion, Fission, and transmutation can occur in these reactions

The subject of water cavitation to produce CWCs leads to the next topic, which is plasmoids.

On this topic, I highly recommend the books and lectures of Moray King.

A plasmoid is a plasma which has a closed magnetic field structure

Plasmoids are often formed in ZPE systems when a Charged Water (or Gas) Cluster is hit by a pulse

http://xray.bmc.uu.se/hajdu/experiment/html/damage.htm

In many ways, plasmoids mimic the behavior of galaxies and nebulae

Plasma filaments in the lab will form “spiral galaxy” shapes even without the action of gravity

These plasmoids usually take the shape of a vortex ring

When combusted, these plasmoids exhibit unusual force, acceleration, and energy which you can use to drive a piston or do other work

Plasmoid explosions can be so powerful that transmutation of elements occurs

• This is a sign that ZPE has been at work

Plasmoid explosions underwater can create a controllable ‘ball lightning’ effect

• Dr. Kiril Chukanov has claimed an overunity effect based on ZPE using this method

A Ball Lightning Plasma ZPE Extraction Unit

Applying vortices to accelerate plasmoids increases the amount of energy they hold

Researchers have also found that by launching a rapid succession of plasmoids,

the energetic effect can be multiplied

Sometimes, parabolic dishes can be used to concentrate otherwise weak ZPE effects

To sum up, we’ve seen a number of ways to extract ZPE

• Pulsed high voltage• Vortex action• Ions & ion acoustic waves• Sound & Ultrasound• Plasmas & Plasmoids• Water cavitation• Torroidal coils in various arrangements• Magnets & magnetic asymmetries• Lasers & micro-lasers

New Energy scientists often advise that using these methods in combination often brings

superior results

They also advise that the order in which they are applied in the system can be key

• A x B does not always equal B x A!• For example, if you pulse voltage first and then

apply a vortex second, the result may be different from a system that creates a vortex action first and then pulses voltage second