Click here to load reader
Upload
elliot-song
View
16
Download
0
Embed Size (px)
Citation preview
Hanlin SongCurriculum Vitae
4820 SW Barbur BlvdAPT 44
Portland, OR 97239H +1 (734) 623 3975B [email protected]
EducationSep 2015 –Dec 2016
Master of Science in Engineering in Naval Architecture and Marine Engineering, University ofMichigan, Ann Arbor, MI, USA, 3.9/4.0.
Sep 2013 –July 2015
Bachelor of Engineering in Naval Architecture with Ocean Engineering with First Class Honours,University of Strathclyde, Glasgow, UK, 4.0/4.0.
Aug 2011 –July 2015
Bachelor of Science in Naval Architecture and Ocean Engineering, Harbin Engineering University,Harbin, China, 3.7/4.0.
ThesisTitle A Numerical Study of Marine Risers Conveying Multi-phase Flow
Supervisor Dr. Narakorn SrinilKeywords Ocean engineering, Marine risers, Multi-phase flow, Fluid-structure interaction, Numerical simulation
Achievements { Established and discretized the governing equations of a riser with multi-phase flow by finite difference method{ Solved and plotted the temporal and spatial responses under different mesh sizes and time steps in MATLAB{ Discovered the existence of unstable regions due to FSI, suggested strengthening the regions in design to
increase service life
AwardsJuly 2015 Salilaksha Basu Prize, Best Graduate, Glasgow, UK.Jun 2014 Reid Birrell Prize, Best Third Year Student, Glasgow, UK.Dec 2013 Dean’s List, Top 5% Student List, Glasgow, UK.June 2012 Tan Guoyu Scholarship, Most Promising Student, Harbin, China.
ExperienceResearch Experience
Jan 2016 –Jun 2016
CAE Researcher, University of Michigan, Ann Arbor, MI, USA.Project: Stress Concentration Reduction of Hatch Corners{ Performed FEA simulations of a rectangular-shaped hatch on ABAQUS to locate and resolve stress concentration{ Identified corners with twice the stress of the vicinity, mitigated by rounding the corners with different curvature{ Reduced principal stress by up to 37.2% with 3% error compared to experimental results in stress concentration factor
Sep 2015–Dec 2015
Hydrodynamics Project, University of Michigan, Ann Arbor, MI, USA.Project: Motion Response of a Wave Energy Converter{ Modeled the WEC as a cylinder to study the effect of directional waves on the motion response of the WEC{ Developed MATLAB code to solve for the motion response to any wave conditions based on transfer function - RAO{ Verified the solution by showing only 0.1% error compared to energy harvested from unidirectional waves{ Suggested optimum operating position of the WEC to improve the power-harvesting efficiency
Jun 2014 –Aug 2014
Marine Design, Kelvin Hydrodynamics Laboratory, Glasgow, UK.Project: To Design an 86,000 DWT Bulk Carrier with 14-knot Speed{ Determined the principal dimensions of the hull from iteration in Mathcad, satisfied hydrostatics stability in Maxsurf{ Optimized hull and tanks for hydrodynamic and structural stability on Hydromax based on Lloyd’s and IMO regulations{ Minimized the dimensions of scantlings at mid-ship using Excel Sheet while achieving sufficient section modulus{ Reduced the main engine weight by 8.9% (25 ton) by choosing a low-speed RT-flex engine
Jan 2014 –May 2014
Marine Design, Kelvin Hydrodynamics Laboratory, Glasgow, UK.Project: To Design the Principal Dimensions of a 13,000 TEU Containership{ Created a database of 7 containerships with less than 10% relative deviation compared with the target ship{ Determined the dimensions by linear interpolation, reduced design error by 90% (2% to 0.2%) from optimization
Vocational ExperienceJuly 2016 –Aug 2016
Conference Supporter, National Training Institute, Ann Arbor, MI, USA.Summer Job to Provide Service for 1,300 Electricians in a 25 People Team{ Facilitated classroom arrangement, lunch break, transportation, accommodations, etc.
Jan 2016 –Nov 2016
Student Coordinator, Michigan Dining, Ann Arbor, MI, USA.Promoted to the Student Coordinator Position in 3 Months{ Coordinated and supervised 20 students at the same time at work{ Employee of the Month winner from a team of 150 people
Sep 2015 –Dec 2015
Service Area Worker, Michigan Dining, Ann Arbor, MI, USA.Part-time Job at a Dining Hall with 3,000 Daily Visitors{ Prepared and served food, greeted guests, cleaned up service areas, took inventory{ Supported myself and made friends while maintaining academic achievements
Sep 2014 –Jun 2015
Voluntary Instructor, ORCHID - Student Mentoring Program, Glasgow, UK.Assisted Students from the NAME Department at University of Strathlcyde{ Mentored 5 Junior students with structural analysis and mathematic problems{ Received 100% positive feedback from the students
Oct 2013 –Apr 2015
Passenger Surveyor, National Data Collection, Glasgow, UK.Part-time Job in the UK to Provide Living Cost{ Collected flow data on ScotRail with 300+ passengers at rush hour{ Promoted in 6 months to team leader with 2 team-members to cover 12-hour shifts
Jun 2013 –Aug 2013
Design Intern, Dalian Shipbuilding Industry co., Ltd., Dalian, China.Summer Internship at DSIC with Engineering Practice{ Visited DSIC and participated in engineering practice{ Assisted in AutoCAD design and fundamental naval architecture design
Computer skillsLanguages C, C++, Python, Java CAD AutoCAD, CATIA, SolidWorks
Naval Arch. Maxsurf, Hydromax, Rhino FEA ANSYS, ABAQUSLinear Prog. MATLAB, AMPL, MathCAD CFD Fluent, OpenFOAMPresentation Office, iWork, LATEX OS Windows, MacOS, Linux
LanguagesMandarin Native English Bilingual
InterestsSports Tennis, VolleyballNature Camping, Photography, Aquarium
ReferencesAvailable Upon Request