Fob Draft System is a foam control device that detects when the keg is empty and automatically stops the flow of beer. It helps to keep your lines filled with beer. This saves the beer wastage and also saves time when you wait for your order. This prevents the foam which you get after an empty keg. For any more queries, you can call us at 1-888-225-2256.
Citation preview
Fob Draft System
Visit us at www.beerfob.com
About UsPacific Beer Equipment’s renowned high-techDraught Foam
Control device (Beer FOBs), theDFC 9500, stops beer flow
immediately after akeg empties, both at the key and the tap.
Thiseliminates the spitting and spraying that usuallyhappens when a
keg “blows”.And because the DFC 9500 keeps the supplylines full of
beer, even when a keg blows, you getinstant beer from a freshly
tapped keg. That’sright – no more time and money is wastedpouring
off foam in order to get to the good stuff.Savings for businesses
are astronomical.Independent testing by various North
AmericanBreweries has shown the DFC 9500 saves anaverage of one
pitcher of beer per keg on atypical long-draw run, even greater
savings forstadiums, airports, and hotels.
DFC9600The original DFC9600's composition anddesign have been
carefully studied by theCanadian Plastic's Institute and all of
theirrecommendations have been implemented inthe design of
DFC9600.Our use of the high quality "EngineeringGrade" plastics,
and design modifications,recommended by the Institute have made
theDFC9600 extremely durable and strong.Although we don't recommend
it, theDFC9600 is strong enough to lift a full keg offof the
ground.The DFC can be fitted with any one of five(5)different base
configurations.(see below fordetails)Easy to operate. After
changing keg's beer flowcan be restored with the twist of the
wrist.Simple installation takes less than five minutes.
DFC9500The DFC9500 stops beer flow instantly when akeg empties,
keeping the supply line full of beer.Beer is no longer wasted as
foam when a new kegis tapped. Save an average of one pitcher
ofdraught per keg. Much greater savings is seen atinstallations
with longer than average supply lineslike Stadiums, Airports, and
Hotels.Reduces the amount of CO2 or Beer Gas usedbecause it no
longer fills the supply line andescapes out of the tap.Ideal for
installations with computer portioncontrol, and flow metering
systems, which canlose Calibration and give inaccurate total
volumereadings when gas passes through them.Bartenders require less
time to change kegsbecause the supply lines do not need to
becleared of gas and foam to get to "clear" beer.Servers do not
have to wait to have their ordersfilled.
How DoesIt Work?
Once your beer keg runs empty, yourusually left with messy beer
froth andfoam. When you have a FOB installedand your keg is full or
when the beer isflowing, a float inside the FOB remainsat the top.
When a keg goes emptythe float instantly drops to the bottomlike a
suction. This suction acts like aplug in a sink, creating a seal
thatprevents any air or gas from enteringthe beer lines.
822A Unit 102 Second Floor, 12thStreet New Westminster, BCCanada
V3M 4K3
