Inferno Steam Hose

Klant logoERIKS Hose Technology www.eriks.co.uk

The Goodall BR8 Inferno Steamhose

ERIKS Hose Technology - www.eriks.co.uk

Goodall BR8 Inferno


8 Problems - 1 Solution

Common Problems The New Inferno Steam Hose

1. Inner subject to popcorning superior gas-tight and extruded inner

2. Outer layer blowing Outer layer extruded and pin-pricked

3. Metal braid rusting 2 layers of brass laminated steel braid

4. Hose markings unclear Clear spiral marking

5. Premature aging New heat and weather resistant cover

6. Hose kinking Double braid prevents kinking

7. Static charge build up Electrically conductive to allow discharge

8. Fittings leaking DINBO Couplings 100% leak-proof to EN ISO 14423


1. Problem: Popcorning


Problem: Popcorning

The expansion factor of a water

Droplet into steam.


Solution

A mirror smooth, homogeneous, seamless extruded tube made of

a new butyl rubber with a very high gas density

– EPDM 1,0 cc/sec/m2

– Butyl 0,3 cc/sec/m2


2. Problem: Outer layer blowing


Solution

Pinpricking

Extruded outer


3. Problem: Rusting braid


Solution

Double braided steel inlays are brass-coated for optimum

corrosion resistance

Stainless Steel inlays also available


4. Problem: Hose markings unclear


Solution: Clear spiral marking


5. Problem: Premature aging, Hardening


Solution: extruded EPDM outer

• UV Resistant

• Wear Resistant


6. Problem: Kinking of the hose


Solution: Two layers of braid


7. Problem: Static Generation

Static is created by the collision of the water and the vapour

molecules in the steam. This friction creates a static electricity

charge


Solution

The BR8 Inferno steam hose is electrically conductive when

measured between the fittings (< 102 Ω )

The rubber compound has a resistance of less than 106 Ω


8. Problem: Fittings leaking


Solution: EN14423 Steam clamps


The Advantage of DIN clamps


Certification

Marketing

Inferno Steam Hose