AdePlast Catalogue -English Version

CATALOG

2

About us Founded in the year 1996, ADEPLAST is a dynamic company which is present on the construction materials market in Romania and on other markets as well, which grows continuously according to customers and partners demands, offering perfectly adaptable complete solutions.

ADEPLAST is the only company with 100% Romanian funds which is on the top 10 manufacturer list next to multi-national companies with high reputation like “Lafarge Cement”, “Holcim”, “Carpatcement Holding”. The spectacular evolution of the company has determined the extension of her production capacities, at present time there is a factory in Oradea, one in Ploiesti and another in Roman. Today we have finish another paint&plasters factory in Ploiesti.

Evolution and perspectives At the starting point of ADEPLAST, Marcel Barbut owned 96% of company shares, investing 10.000 $ - the equiva-lent of 31.000.000 Lei at that period. The other four associates contributed with only 8$, meaning 25.000 Lei. How-ever, the profit was split equally. Within one year the associates had the right to re-buy the shares. By the profit they made, the four share-holders had bought their shares, each one of them having 20%.

In the year 2002 Mr. Marcel Barbut bought from Mr. Aron another 10% from the share-package with 125.000 Euro, managing to own 30% of the company shares. The same thing is being done by Mr. Flaviu Pop who manages to hold 30% of the shares, also.

In the year 2005 the Stefani family together with Mr. Marcel Barbut bought Mr. Flaviu Pop and Mr. Erdosi shares with the sum of 5.000.000 Euro and in this way Mr. Barbut manages to hold 60% of the shares and the Stefani family only 40%.

In 2007 Mr. Marcel Barbut buys for 6.000.000 Euro the shares of Stefani family and manages to own all the shares of AdePlast.

In the same year Mr. Marcel Barbut gives one share to Mrs. Cristina Paveliuc and transforms AdePlast in a company based on stocks, his intention being to have it rated on the Stock-Market so that he can obtain the necessary funds for a new development.

Because of the economical crisis during that time Mr. Marcel Barbut gives up at the Stock-Market ratings and starts investing, very seriously, in the development of the company throughout credits. Because of the continuous ascen-sion of the company and also her profitability the UNICREDIT TIRIAC Bank has sustained and she still does all the initial plans for development of AdePlast.

The company has ended he year 2012 with a growth of 30% and a temporary EBITDA of 7.900.000 Euro. The com-pany has reach the economical crisis having an EBITDA value of over eight times, meaning 63.000.000 Euro.

Mr. Marcel Barbut did not give up his plan of listing the company to the Stock-Market. INTERCAPITAL, close related to ERSTE will share the AdePlast investment group to the Stock-Market for developing a surprise investment.

Brief History• 1994, founded at Oradea, having the name “Multistar Prod S.R.L.”

• 1996 Mr. Marcel Bărbuţ becomes share-holder and the company becomes an austrian-romanian mixt company, the goal of the company becomes the production of adhesives mortars for ceramic tiles, plasters, industrial floors

17 YEARS OF FIGHTOVER SUPREMACY!

3

and automatized mortars under the trademark of ADEPLAST SA.

• 2004, June, Dry Mortars Factory in Oradea.

• 2005-2007, a strong auto fleet is created.

• 2007, Multistar Prod S.R.L. becomes a company based on bonds named ADEPLAST S.A.

• 2008 July, Paints and Decorative Plasters Factory in Oradea.

• 2008 September, Dry Mortars Factory in Ploieşti.

• 2011 May, “Dry-Sieving Sand Instalation” created for Dry Mortars Factory in Oradea

• 2011 June, Polystyrene Factory in Ploiesti

• 2012 November, Production Line for graphite polystyrene Factory in Ploiesti

LocationsIndustrial Platform - Ploiesti

Dry mortars factoryThe factory produces 450.000 tones/year of dry mortars, has large warehouses and a very well based logistic.

Expanded polystyrene factoryThis factory has a capacity of producing white polystyrene for over 700.000 cubic meters.

The production line bought from Zentyss makes 150.000 cubic meters per year of graphite polystyrene being a line

dedicated to this profile.

As a result, the entire capacity of production is of 850.000 cubic meters.

Paints and decorative plasters factoryAt the beginning of August - 2013, at Ploiesti, a new fac-tory of paits and decorative plasters has been build with a value of aprox. 6.000.000 Euro. The factory has a produc-tion capacity of 20.000 tones/year and she is fully automa-tized - the factory is being operated by 5 employes only.

4

Oradea Industrial Platform

Paints and decorative plasters factoryThe total production capacity reaches to 20.000 tones/year for washable paints and decorative plasters. The production is made only by 5 employes because the factory is completely automatized.

Dry mortars factoryWe produce annually about 250.000 tones of dry mortars. 25 - 40% of produc-tion is designated to export in countries such as: Hungary, Slovakia, Germany and Austria. The purpose of ADEPLAST is to export as a unit the components of an inte-grated system (adhesives, polystyrene, fillers foundation and decorative plasters).

Expanded polystyrene factoryThe polystyrene factory will have a capacity identical to the one in Ploiesti of over 700.000 m³ and is the only one in Europe who can produce white and graphite polystyrene at the same time. The total capacity predicted for the polystyrene pro-duction, of both types, for Oradea, Roman and Ploiesti locations will be of over 2.250.000 m³/year.

Roman Industrial Platform

Dry mortars factoryThe investment was started in the year 2010, but postponed due to the lack of a financially support and bureaucratic impediments from the government and local authorities. Started all over again by own efforts in the year 2012 and against all difficulties, the new adhesives and dry mortars factory rises in a sustained way. At the beginning of the year 2013 the factory is up and ready and manages to produce over 450.000 tones/year of adhesives and dry mortars - European quality.

Expanded polystyrene factoryThe factory will have a capacity identical to the one in Ploiesti of 700.000m³ be-ing the only one in Europe who can produce both brands - white and graphite polystyrene.

5

Marcel Bărbuț

ADEPLAST - European Class Competitor

Adeplast currently produces over 50 varieties of building ma-terials. ADEPLAST force in Romania will rise to eight produc-tion facilities in dry mortars, plasters, paints and insulating materials, becoming one of the major players in Europe mar-kets. In its location ADEPLAST created hundreds of jobs, has developed partnerships with distributors, manufacturers, car-riers and various other vendors, contributed to local budgets and continuously developed long term relationships. Invest-ing and permanently modernizing, ADEPLAST is ready for any challenge, being a competitor and a leading European partner.

prof

essi

onal

serie

s - A

DEPL

AST

inno

vati

on

professional series - ADEPLAST innovation

6

PROFESSIONAL SERIES - ADEPLAST INOVATION GENERAL TERMS Constant and persistent improvement of the product quality and also of all the features,

design and diversification are to ADEPLAST a new action concept created for the needs of the customers there-for increasing their loyalty and satisfaction.

In this way, Adeplast is launching an innovative range of products on the Romanian market, which contain a special ingredient, created to ensure particular features, named PORUS X. This ingredient has the ability of waterproofing, maintains surface porosity and also reduces significantly water absorption.

The Porus X ingredient, founded exclusively in the professional range of ADEPLAST prod-ucts, provides properties that set apart this products compared with others that are al-ready on the market:

- Water resistance: hydrophobic action for the surfaces on which that products are applied (“pearl effect”).

- Increased permeability to water vapours: breathable wall.

- Durability: increases the life of the surface.

COMPONENT RANGE:

AERIA STONE with PORUS X AERIA with PORUS X - INTERIOR PAINT

AERIA with PORUS X - EXTERIOR PAINT

AERIA PLAST with PORUS X - DECORATIVE PLASTER



7

APVE AERIA with PORUS X - exterior paintApplication: For painting all mineral exterior layers based on cement, plaster and for renovation of areas covered with disper-

sion paint or decorative plasters, aiming for a colored finish with brilliant hues.Consumption: Approx. 0,20 - 0,30 liters / m², on two layers.Colouring: The product is delivered by the manufacturer already colored at the option of the beneficiary, based on

ADEPLAST color chart, or is delivered white.

APAH0 AERIA STONE with PORUS X - hydrophobic action for natural stones and facadesApplication: For impregnating mineral surfaces, natural stones, etc. in order to eliminate water absorption and to obtain the

“pearl effect” without changing the looks of the impregnated layer.Consumption: Approx. 50-100 ml / m² depending on the absorbency and the nature of the substrate. To determine

actual consumption, we recommend testing directly on the construction site on the surface that requires finishing.

APVI AERIA with PORUS X - interior paintApplication: For painting all mineral interior layers based on lime, lime-cement, lime-plaster, plaster, concrete. Recommend-

ed for professional use, to obtain breathable surfaces with high resistance to contamination. Consumption: Approx. 0,20 - 0,30 liters / m², on two layers.Colouring: The product is delivered by the manufacturer already colored at the option of the beneficiary, based on

ADEPLAST color chart, or is delivered white.

AERIA Series - revolutionary vectors of the PORUS X ingredients.

APT AERIA PLAST with PORUS X - decorative plasterApplication: It is used for decorative coatings and professional finishing with waterproof and breathable effect particularly on

the interior and exterior works. Can be applied to any type of mineral surfaces: plasters, concrete, masonry, etc.. Professional quality - can be easily applied in a single layer. Recommended for professional use.

Colouring: The product is delivered by the manufacturer already colored at the option of the beneficiary, based on ADEPLAST color chart, or is delivered white and colored when applied using coloring paste.

Consumption: - Troweled plaster: 1,0 mm - 2,0 kg / m² 1,5 mm - 2,5 kg / m² 3,0 mm - 3,5 kg / m² - Scratched plaster: 2,0 mm - 2,8 kg / m² 3,0 mm - 3,1 kg / m² - Roled plaster: 1,5 kg ÷ 2,5 kg / m²

prof

essi

onal

serie

s - A

DEPL

AST

inno

vati

on


8

Silicon Based Paints and Decorative Plasters

Silicone decorative plaster is a decorative structured plaster in relief, ready to be use, based on silicone resin, diluted with water. Washable, elastic, flexible, waterproof with hydrophobic properties, resistant to scratch and impact, highly resistant to aggressive environmental factors such as rain, humidity, temperature variations, solar radiation, pollution, etc. - it is used for decorative coatings and special effect finishes for interior and exterior works.

Can be applied to any type of mineral surfaces: plasters, concrete, masonry, but are recommended for historic buildings and monuments and also on the north side of buildings. Due to its higher professional quality, it can be easily applied in a single layer or as a trowel plaster, scratched or rolling.

The product is delivered by the manufacturer already colored at the option of the beneficiary, based on ADEPLAST color chart, or is delivered white and colored when applied using coloring paste.

Silicone decorative plaster should be applied on dry, dust-free and carrying sur-faces. Any projections will be removed. Inhomogeneous surfaces showing oil substances or otherwise, which could form a film between the material and sup-port must be treated accordingly.

On how to apply the paint, in the case of trowel plaster (of 1.0mm, 1.5mm and 3.0mm) and the scratched plaster (of 2.0mm and 3.0mm), this will apply with the stainless steel trowel (float metal) in a thin layer (optimum layer thickness as close as the diameter of the granules). On the trowel plaster the structuring is made in a uniform way until you obtain the desired relief and appearance: gran-ular - calcium type. At the scratched plaster you can choose the layout, direction and form of the grooves depending on how the structure is made (vertical, hori-zontal, round, irregular, etc..). Role plaster application will be made with a stain-less steel trowel with teeth of 4mm and after that the material is spread evenly with a structure roller made of harsh sponge (surface with holes) in a vertical way and then horizontal.

The material cannot be applied in bright sunlight or at high wind or when there is a risk of rain or freezing they may cause, during application and drying, cracking and colour differences. After application, the external surfaces will be protected from rain, until completely dry (48 h at 20 ˚C). For any coloured plasters, joints and joiners between colours are made using self-adhesive paper.

Work performed with finishing products materials from ADEPLAST.



9

SIT DECOPLAST SILICONICĂ- STRUCTURED DECORATIVE PLASTERApplication: Used for decorative coatings and special effect finishes in indoor and outdoor works. Can be applied to any type

of mineral surfaces: plasters, concrete, masonry, etc.. Professional quality, can be easily applied in a single layer.


Consumption: -Troweled plaster: 1,5 mm - 2,5 kg/m² - Scratched plaster: 2,0 mm - 2,8 kg/m² Indicated consumption refers to perfectly smooth surfaces and may vary depending on the thickness

of the coating and the characteristics of the base-layer. For this reason we can not accept any liability in relation to material requirements for each case.

Product code: SITD15B1 Product code: SITD15B2 Product code: SITD15B3TROWELEDPLASTER

1,5 mm

B1 - white base, pastel colors B2 - intermediary base, pastel colors B3 -transparent base, pastel colors

Product code: SITZ20B1 Product code: SITZ20B2 Product code: SITZ20B3SCRATCHEDPLASTER

2,0 mm

Product code: SITRB1 Product code: SITRB2 Product code: SITRB3ROLEDPLASTER

Packaging: 28 kg bucket.Pallet Stand: 24 buckets/pallet 672 kg.Quality Standard: SR EN 15824:2009.

SIVE VOPSEAUA MESERIAȘULUI - SILICONApplication: For painting all interior and exterior mineral surfaces. Can be applied to any type of new mineral surfaces based

on cement or plaster and also for renovating areas covered with dispersion paints or decorative plasters in order to obtain a colored finish and brilliant hues. Recommended for mineral insulating system based on mineral wool, restoration of historical monuments, old buildings and on the north side of buildings.


Consumption: Approx. 0,20 - 0,30 liters / m², on two layers.

Product code: SIVE3LB1 Product code: SIVE3LB2 Product code: SIVE3LB33 L


Product code: SIVE8LB1 Product code: SIVE8LB2 Product code: SIVE8LB3

Product code: SIVE15LB2 Product code: SIVE15LB3Product code: SIVE15LB1

package

8 L

15 L

structurebase type

base type

Packaging: 5 L bucket.Pallet Stand: 24 buckets/pallet 672 kg.Quality Standard: Approved product by INCERC s.a.

prof

essi

onal

serie

s - A

DEPL

AST

inno

vati

on


10

Ceramic tiles with

Adhesives AFX-9 and AF 11 plus, from the professional range, are used for laying

tiles and plating absorbent and poorly absorbed sandstones from the inside, in dry environments, without moisture and excessive heat, on rough and stable support (plaster and cement lime, BCA, concrete, cement screeds, etc.).

The support surface must be reinforced, clean, dry, free of cracks, adherent and compact, free from grease, dust, loose residues and salts. Old mortar with bumps and warps will be removed. The layout surface will be rendered with mortar made of lime or cement or with other mortars from the ADEPLAST® series.

Professional finishing systems

The Plaster with Porus X from professional series is used for finishing interior surfaces without excessive moisture from concrete, lightweight concrete, dry plaster, cement, lime and gypsum blocks. It is intended to provide very fine and smooth surfaces before painting or oil painting.

The specific ingredient - Porus X, developed specifically for ADEPLAST provides increased system performance and defines specific qualities:

- High permeability to water vapours. It allows the wall to breathe but does not allow water to enter from the outside.

-Durability: increases the life of the finish surfaces. System Components: 1. Porus X Wall Primer. Prepares the layout surface by reducing and

smoothing absorption. The surface must be clean, adherent and compact, old - for at least 30 days, free of grease, dust, loose residues, salts and gyp-sum traces.

2. GM-126 - Porus X Plaster Filling. His role is to cover bad surfaces in order to prepare them for finishing layouts and to ensure that bumps aren’t bigger than 5 mm.

3. GM-127 - Porus X Finishing Plaster. Super white, with a very good workability for obtaining impeccable surfaces.

4. AERIA with Porus X - Interior Paint. Excellent coverage, increased permeability to water vapours. It allows the wall to breathe, but does not allow water to enter from the outside.

ADHESIVES & PRIMERS - PROFESSIONAL SERIES



11

AFX-9 SPECIAL ADHESIVE FOR CERAMIC TILES – FOR INTERIORApplication: For tiling works and cladding tiles at the inside, in dry

environments, without moisture and excessive heat on medium rough and stable mineral support(cement and lime plaster, brick, concrete, cement screeds, etc..). NOTE: Do not apply on gypsum boards.

Consumption: about 3-4 kg / m² depending on the quality of the layout. 5 945762 011800

Product code: AFX 9Packaging: bag of 25 kgPallet Stand: 48 bag/pallet 1200 kgQuality Standard: SR EN 13279-1:2008

AF 11 plus SPECIAL ADHESIVE FOR PORCELAIN CERAMIC TILESApplication: For Tiling works and cladding tiles, porcelain tiles, tile over

tile, dapper cement and so on, for inside or outside, exposed to temperatures between -25 ° C and + 80 ° C in wet or dry environments. Do not apply on metal support, wood, plastic, etc.

Consumption: about 3-4 kg / m² depending on the quality of the layout. 5 945762 011817

Product code: AF 11 plusPackaging: bag of 25 kgPallet Stand: 48 bag/pallet 1200 kgQuality Standard: SR EN 13279-1:2008

GM 126 GYPSUM BASED PLASTER WITH PORUS X, FOR FINISHING WORKSApplication: For finishing interior surfaces without excessive mois-

ture from the concrete, lightweight concrete, cement based dry plasters, cement - lime, gypsum blocks. It is used to obtain very fine and smooth surfaces before painting or oil painting.

Consumption: 0,5 to 1 kg/m² at 1 mm thickness applied. 5 945762 011794

Product code: GM 126Packaging: bag of 20 kgPallet Stand: 48 bag/pallet 960 kgQuality Standard: SR EN 13279-1:2008

GM 127 CEMENT BASED PLASTER WITH PORUS X, FOR FINISHING WORKSApplication: For finishing interior and exterior surfaces of concrete,

lightweight concrete, cement dry-based plasters, cement - lime and where there is a risk of a wet envi-ronment after application (bathroom, kitchen, rooms like indoor swimming pool, etc.). It is used to obtain very fine and smooth surfaces.

Consumption: 0,5 to 1 kg/m² at 1 mm thickness applied.5 945762 011787

Product code: GM 127Packaging: bag of 20 kgPallet Stand: 48 bag/pallet 960 kgQuality Standard: SR EN 13279-1:2008

Ceramic tiles adhesives - POLYMER 1000X

Finishing Plasters cu PORUS X

adhe

sive

s for

tilin

g

adhesives for tiling

12

ADHESIVES FOR TILING

Preparation Guide for ceramic tiles adhesives SUPPORT SURFACE: It must be strengthened, clean, dry, free of cracks, adherent and compact, free from grease, dust,

breakable residues and salts. Swelling and warp old mortar will be removed. The support surface will be plastered with ordinary mortar and lime or with mortars from ADEPLAST® mortars range. For uneven surfaces such as screeds we will apply a levelling screed. In the case of surfaces that must be plated in wet areas, outside or at the pool, you can, in advance, waterproof the surface with ADEPLAST® MH-1K waterproofing mono-component membrane.

In the case of bad or deformable support surfaces, it is necessary to use AF-S white or AF-S grey.

BCA walls will be plastered in advance with mortar based on cement-lime (ADEPLAST ® MTI-25 indoor ADEPLAST ® Outdoor MTE-35) after complete curing of the mortar (7 days/cm applied layer thickness) and then the adhesive can be applied.

TOOLS NEEDED: - bucket - mechanical or by hand mixer - trowel - notched with teeth of 6 x 6 mm, 8 mm x 8 mm or 10 x 10 mm depending on the size of the

plate - construction level - tile cutter PREPARATION AND APPLICATION: The powder is introduced into water and then we begin mixing. Both the container and the water

used must be clean. It is recommended to mix a quantity that is used once in an hour. Mixing is done vigorously, preferably mechanical (to an electric drill an axle paddle can be attach) until a creamy mixture, homogeneous, easy to be processed and with suitable fluidity. In the event that an insufficient amount of water is added, the product loses its adhesive properties. Wait 10 minutes for the completion of chemical reactions and mix vigorously again. The paste is placed on the surface in a thickness of 4-5 mm, after which rake with a comb with teeth of 6-8 mm in width and depth. Raking the paste has a double advantage: increases grip plate and reduces the material consumption. Paste deposited on the adhesive pad maintains properties for 15-20 min-utes. Paste adhesive capacity can be checked by tapping the surface with fingers. Sticky fingers indicate that paste adhesive is suitable. Plates are placed onto the adhesive layer and pressure is applied vigorously, followed by tapping movements, in order to ensure the largest possible contact area ( at least 75 % of the back of the plate ).

In the case of AF-N ADEPLAST ® adhesive, when tiles are applied over a smooth surface like dap-per cement, mosaic, old tiles, the surface must be clean in advance by washing with warm water and liquid detergent - wash traces of detergent with water, wipe surface with a clean, dry cloth, then apply a bonding layer of 0.5 - 1 mm thick AF-N ADEPLAST® adhesive and leave it for 24 hours to harden. The next day, over this layer, the mixture is applied using a comb shape trowel. The paste from the bucket retains its adhesives properties for at least 2 hours. Joints are closed with ADEPLAST KITS JOINTS, ADEPLAST QK-6 or QK-15, after a minimum curing period of 24 hours.

Any subsequent work will be done after a minimum of 72 hours from the plating time. THE SURFACE BECOMES USABLE:

After a minimum of 24 hours for ADEPLAST JOINTS KITS, ADEPLAST QK-6 or QK-15 - adhesive kits for joints. After less than 72 hours for general use.

Trowel

Mixing

The consistency of the material on the trowel

Application of the material on the support surface



13

IMPORTANT: At temperatures below 20 ° C the curing time is extended. In addition to the above it is important to follow all the rules and standards that are now in place.

Guaranteed characteristics are based on practical experience and tests. The specific location and application may be different from those presented here, therefore, proper and successful use of our products is not in our sphere of responsibility.

Specific consumption optimization by raking.

Applying the plate and tapping.

Plate adhesive appliance.

Application of the material on the support surface.

AF-E CERAMIC TILES ADHESIVE FOR EXTERIOR SURFACESScope of use: Tiling works and cladding tiles for inside or outside

surfaces, exposed to temperatures between -20 ° C and +80 ° C in wet or dry environments, on rough backing mineral surfaces (cement and lime plaster, brick, concrete, screed of cement, etc.).

Specific consumption: approx. 3 - 4 kg/m², depending on the quality of the support surface.

Product code: afe5x5Packaging: box of 5 x 5 kgPallet Stand: 28 boxes/pallet 700 kgQuality Standard: SR EN 12004 / 2008

Product code: afe05Packaging: bag of 5 kgPallet Stand: 140 bags/pallet 700 kgQuality Standard: SR EN 12004 / 2008

Product code: afe25Packaging: bag of 25 kgPallet Stand: 48 bags/pallet 1200 kgQuality Standard: SR EN 12004 / 2008

AF-I CERAMIC TILES ADHESIVE FOR INTERIOR SURFACESScope of use: Tiling works and cladding tiles for inside surfaces, in dry

environments, without moisture and excessive heat on rough and stable mineral surfaces (cement and lime plaster, brick, concrete, cement screeds, etc.).

NOTE: Do not apply on gypsum boards.Specific consumption: approx. 3 - 4 kg/m² depending on the quality of the

support surface.

Product code: afi25Packaging: bag of 25 kgPallet Stand: 48 bags/pallet 1200 kgQuality Standard: SR EN 12004 / 2008

Product code: afi5x5Packaging: box of 5 x 5 kgPallet Stand: 28 boxes/pallet 700 kgQuality Standard: SR EN 12004 / 2008

Product code: afi05Packaging: bag of 5 kgPallet Stand: 140 bags/pallet 700 kgQuality Standard: SR EN 12004 / 2008

adhe

sive

s for

tilin

g


14

AF CERAMIC TILES ADHESIVE FOR INTERIOR / EXTERIOR SURFACESScope of use: Tiling works and cladding tiles for inside or outside

surfaces, exposed to temperatures between -20 ° C and +80 ° C in wet or dry environments, on rough mineral surfaces (cement and lime plaster, BCA, concrete, screed of cement, etc.).


Product code: afPackaging: bag of 25 kgPallet Stand: 48 bags/pallet 1200 kgQuality Standard: SR EN 12004 / 2008

AF-N HIGH STRENGTH SUPERPLASTIC ADHESIVE Scope of use: Tiling works and cladding tiles, porcelain tiles, tile over

tile, dapper cement and so on, for inside or outside, exposed to temperatures between -25 ° C and + 80 ° C in wet or dry environments and also for the applica-tion of ceramic tiles over under-floor heating. It can be used for application of clinker and greso-granite plates, tiles, gypsum boards, façade appliance of Basalt tiles for exterior insulation of houses build on Rockwool (Fasrock, Frontrock) or Nobasil (FKL) patterns.

Specific consumption: approx. 3 - 4 kg/m² depending on the quality of the support surface.

Product code: af-nPackaging: bag of 25 kgPallet Stand: 48 bags/pallet 1200 kgQuality Standard: SR EN 12004 / 2008

AF-S GREY SUPERFLEXIBLE HIGH STRENGHT ADHESIVE Scope of use: Tiling works and cladding tiles, porcelain tiles, tile over tile,

dapper cement, marble, granite and so on, for inside or outside, exposed to temperatures between -25 ° C and + 80 ° C in wet or dry environments, and also for the application of ceramic tiles over under -floor heating. It can be used for application on clinker and greso-granite plates, tiles, gypsum boards, big tiles over mineral sub-surfaces.


Product code: af-s greyPackaging: bag of 25 kgPallet Stand: 48 bags/pallet 1200 kgQuality Standard: SR EN 12004 / 2008

AF-S WHITE SUPERFLEXIBLE HIGH STRENGHT ADHESIVE Scope of use: Tiling works and cladding tiles, porcelain tiles, tile over tile,

dapper cement, marble, granite and so on, for inside or out-side, exposed to temperatures between -25 ° C and + 80°C in wet or dry environments, and also for the application of ceramic tiles over under-floor heating. It can be used for application on clinker and greso-granite plates, tiles, gypsum boards, big tiles over mineral sub-surfaces and where white colored adhesive is needed.


Product code: af-s whitePackaging: bag of 25 kgPallet Stand: 48 bags/pallet 1200 kgQuality Standard: SR EN 12004 / 2008

AF-11 + PORZELLANO - ADHESIVE FOR PORCELAIN TILESScope of use: Tiling works and cladding tiles, porcelain tiles, tile over tile,

dapper cement, marble, for inside or outside, exposed to temperatures between -25 ° C and + 80°C in wet or dry environments. Do not apply on metal support, wood, plastic, etc.


Product code: af11+Packaging: bag of 25 kgPallet Stand: 48 bags/pallet 1200 kgQuality Standard: SR EN 12004 / 2008



15

MH-1K MONO-COMPONENT WATERPROOF MEMBRANEScope of use: It is used for waterproofing works on terraces, balco-

nies, pools or water tanks before plating with ceramic tiles, natural stone or marble. For plating, use only a flexible adhesive such as GREY AF-S or WHITE AF-S. Due to the grain size of 0.8 mm the surface roughness is very high, resulting in an increased adherence of the adhesive applied to the waterproof membrane. Do not use for swimming pools and water tanks with depths over 4 meters, on surfaces that are generating efflorescence and also on mineral surfaces with low compressive strength (breakable surfaces).

Specific consumption: approx. 3 - 5 kg/m² (depending on the quality of the support surface), with a total thickness of 2mm /maximum 2 layers.

Product code: mh-1kPackaging: bag of 25 kgPallet Stand: 48 bags/pallet 1200 kgQuality Standard: SR EN 14891: 2008

FS-57 WHITE WHITE ADHESIVE FOR NATURAL STONES Scope of use: For the construction of natural stone coverings, with average

absorption, from the inside or outside, exposed to tempera-tures between -25 ° C and + 80 °C, in wet or dry environ-ments, where the white colour of the adhesive is required. Do not apply on hard metal, wood, plastic, etc..


Product code: fs-57wPackaging: bag of 25 kgPallet Stand: 48 bags/pallet 1200 kgQuality Standard: SR EN 12004 / 2008

FS-57 GREY GREY ADHESIVE FOR NATURAL STONES Scope of use: For the construction of natural stone coverings, with

average absorption, from the inside or outside, exposed to temperatures between -25 ° C and + 80 °C, in wet or dry environments. Do not apply on hard metal, wood, plastic, etc.


Product code: fs-57gPackaging: bag of 25 kgPallet Stand: 48 bags/pallet 1200 kgQuality Standard: SR EN 12004 / 2008

MX WHITE WHITE ADHESIVE FOR MARBLE AND GRANITEScope of use: Tiling works and cladding big tiles, marble tiles, granite

and other natural stones, clinker and greso-granite, where keeping the white colour of the adhesive to the most demanding work inside or outside the building is necessary, for cladding low temperature rooms and over-heated flooring, exposed to temperatures be-tween -25 ° C and +90 ° C, in wet or dry environments.


Product code: mx-whitePackaging: bag of 25 kgPallet Stand: 48 bags/pallet 1200 kgQuality Standard: SR EN 12004 / 2008

MX GREY ADHESIVE FOR MARBLE AND GRANITEScope of use: Tiling works and cladding big tiles, marble tiles, granite

and other natural stones, clinker and greso-granite, for interior and exterior jobs that need special care, for cladding low temperature rooms and over-heated flooring, exposed to temperatures between -25 ° C and +90 ° C, in wet or dry environments.


Product code: mx-greyPackaging: bag of 25 kgPallet Stand: 48 bags/pallet 1200 kgQuality Standard: SR EN 12004 / 2008

expa

nded

pol

ysty

rene

ther

mal

insu

lati

on m

ater

ials

16

expanded polystyrene thermal insulation materials

ADP70 FIRE RETARDANT EXPANDED POLYSTYRENE BOARDS Field of use: As thermal insulation boards intended for: - spaces with no particular static load - insulation of spare spaces - indoor insulation and ceiling intra-dos Cutting thickness [mm]: as per SR EN823 ... 20, 30, 40, 50, 60, 70, 80, 90, 100, 110, 120, 130, 140, 150, 160 +/- 2 mm T1

Technical features:Panel size (length x width [mm]) ................................................ 1000 x 500 mm +/- 3 mm L1 x W1Perpendicularity, as per SR EN 824 ...................................................................... +/- 2mm /1 m S2Evenness, as per SR EN 824 ...................................................................................... +/- 5 mm P4Bending resistance, as per SR EN 12089 .................................................................. BS75 BS≥75Compressive stress at a 10%, deformation, as per SR EN 826 ………………...... CS10(50) CS≥50Traction resistance, as per SR EN 1607 ..................................................................... TR50 TR≥50Thermal conductivity [W/m•K] .............................................................................................. 0,040Adustion class, as per SR EN 13501-1 ............................................................... Euroclass B-s2,d0

ADP80 FIRE RETARDANT EXPANDED POLYSTYRENE BOARDS Field of use: As thermal insulation boards intended for: - spaces with no particular static load - insulation of spare spaces - indoor insulation and ceiling intra-dos - facadesCutting thickness [mm]: as per SR EN823 ... 20, 30, 40, 50, 60, 70, 80, 90, 100, 110, 120, 130, 140, 150, 160 +/- 2 mm T1

Technical characteristics:Board size length x width [mm]) ........................................... 1000 x 500 mm +/- 3 mm L1 x W1Perpendicularity, as per SR EN 824 ................................................................ +/- 2mm /1 m S2Evenness, as per SR EN 824 ..................................................................................... +/- 5 mm P4Bending resistance, as per SR EN 12089 ........................................................... BS100 BS≥100Compressive stress at a 10%, deformation, as per SR EN 826 ....................... CS10(60) CS≥60Traction resistance, as per SR EN 1607 ................................................................... TR50 TR≥50Thermal conductivity [W/m•K] ............................................................................................... 0,040Adustion class, as per SR EN 13501-1 ............................................................ Euroclass B-s2,d0

EPS70 FIRE RETARDANT EXPANDED POLYSTYRENE BOARDSField of use: As thermal insulation boards intended for: - ventilated facades - ETICS system facades (External thermal insulation composite systems)Cutting thickness [mm]: as per SR EN823 ... 20, 30, 40, 50, 60, 70, 80, 90, 100, 110, 120, 130, 140, 150, 160 +/- 2 mm T2

Technical characteristics:Board size length x width [mm])…………............................... 1000 x 500 mm +/- 3 mm L2 x W2Perpendicularity, as per SR EN 824 ................................................................ +/- 2mm /1 m S2Evenness, as per SR EN 824 ................................................................................... +/- 5 mm P4Bending resistance, as per SR EN 12089 .....,,,,,,,,,,,,,,,,..................................... BS115 BS≥115Compressive stress at a 10%, deformation, as per SR EN 826 ...................... CS10(70) CS≥70Traction resistance, as per SR EN 1607 .................................................................. TR50 TR≥50Thermal conductivity [W/m•K] .............................................................................................. 0,039Adustion class, as per SR EN 13501-1 ........................................................ Euroclass B-s2,d0

THERMAL INSULATING MATERIALS

Thermal Insulation Boards of Fire Retardant Expanded Polystyrene Beads

expanded polystyrene thermal insulation m

aterials


17

EPS80 FIRE RETARDANT EXPANDED POLYSTYRENE BOARDSField of use: As thermal insulation boards intended for: - ventilated facades - ETICS system facades (External thermal insulation composite systems)Cutting thickness [mm]: as per SR EN823 ... 20, 30, 40, 50, 60, 70, 80, 90, 100, 110, 120, 130, 140, 150, 160 +/- 2 mm T2

Technical characteristics:Board size length x width [mm]) .............................................. 1000 x 500 mm +/- 3 mm L2 x W2Perpendicularity, as per SR EN 824 .................................................................. +/- 2mm /1 m S2Evenness, as per SR EN 824 .................................................................................... +/- 5 mm P4Bending resistance, as per SR EN 12089 ............................................................. BS150 BS≥150Compressive stress at a 10%, deformation, as per SR EN 826 ……………....... CS10(80) CS≥80Traction resistance, as per SR EN 1607 ................................................................ TR150 TR≥150Thermal conductivity [W/m•K] .............................................................................................. 0,038Adustion class, as per SR EN 13501-1 ............................................................. Euroclass B-s3, d0

EPS80+ FIRE RETARDANT EXPANDED POLYSTYRENE BOARDSField of use: As thermal insulation boards intended for: - ventilated facades - ETICS system facades (External thermal insulation composite systems)Cutting thickness [mm]: as per SR EN823 ... 20, 30, 40, 50, 60, 70, 80, 90, 100, 110, 120, 130, 140, 150, 160 +/- 2 mm T2


EPS100 FIRE RETARDANT EXPANDED POLYSTYRENE BOARDSField of use: As thermal insulation boards intended for: - average static load spaces, non –traffic terraces, under leveling concrete flooring - ETICS system facades (External thermal insulation composite systems)Cutting thickness [mm]: as per SR EN823 ... 20, 30, 40, 50, 60, 70, 80, 90, 100, 110, 120, 130, 140, 150, 160 +/- 2 mm T2

Technical characteristics:Board size length x width [mm]) .............................................. 1000 x 500 mm +/- 3 mm L2 x W2Perpendicularity, as per SR EN 824 .................................................................. +/- 2mm /1 m S2Evenness, as per SR EN 824 .................................................................................... +/- 5 mm P4Bending resistance, as per SR EN 12089 ............................................................. BS170 BS≥170Compressive stress at a 10%, deformation, as per SR EN 826 ……………....... CS10(100) CS≥100Traction resistance, as per SR EN 1607 ................................................................ TR150 TR≥150Thermal conductivity [W/m•K] .............................................................................................. 0,036Adustion class, as per SR EN 13501-1 ........................................................... Euroclass C-s2, d0

EPS120 FIRE RETARDANT EXPANDED POLYSTYRENE BOARDSField of use: As thermal insulation boards intended for: - average static load (flooring), low traffic terraces, under leveling concrete flooring - wood framing roofs, industrial roofing as subject to average mechanical stress - ETICS system facades (External thermal insulation composite systems)Cutting thickness [mm]: as per SR EN823 ... 20, 30, 40, 50, 60, 70, 80, 90, 100, 110, 120, 130, 140, 150, 160 +/- 2 mm T2


expa

nded

pol

ysty

rene

ther

mal

insu

lati

on m

ater

ials

18



aterials


19

ADEPLAST® - Neopor®: a long-term partnership BASF is the worldwide leader in the chemical field: The Chemical Company. The German Group stands for a reliable partner of all industries and contributes to the increase of its partners’ success by supplying high quality products, smart solutions and innovative technologies. The BASF Group is represented in Romania by the BASF SRL company that was incorporated back in 1993.

In 2012, BASF entered into a co-branding partnership with Adeplast company, under which the latter may use the Neopor® products in Romania, Hungary and the Republic of Moldavia. Under such co-branding agreement, all packaging Neopor® based graphitized expanded polystyrene shall be marked as “ Made of Neopor ® provided by BASF”, as a certification of the raw material that was used for manufacturing purposes and as a highlight on the chemical industry world leader partnership.

BASF discovered more than 60 years ago a classic element, namely the expanded polystyrene, under the EPS abbreviation. Under the Styropor® brand, EPS stands even nowadays for the global solution to effective building thermal insulation or to product safe packaging. In 1995 BASF was awarded the invention patent for Neopor®. With this new product range, BASF carried on and improved the Styropor® product range performances. The new insulation material is expanded and processed as foam blocks, panels/boards and moulded components. As for Neopor®, graphite was also added to the raw material mix, which absorbs and reflects heat radiation and improves the EPS thermal insulation capacity by up to 20%.

Neopor® is formed of small grey polystyrene granules (EPS) containing an expanding agent; this unique raw material is further on processed in thermal insulation materials intended for a wide range of applications. Neopor®-made thermal insulation materials provide an increased thermal insulation capacity and a raw material consumption of up to 50% lower than the conventional EPS.Thus, the products and environment- friendly and thus both resource and cost effective for the client. The Neopor® ecolog-ical materials contain air cells that guarantee the preservation of technical conductivity throughout the building’s operating life. Neopor ® granules (EPS) expanded polystyrene –made insulation materials are resistant to damage and aging as well as highly solid and stable size wise. Given such properties, the Neopor® systems provide long-term insulation and permanent safety.

Prior to applying the exterior/outdoor insulation that is made of Neopor® insulating materials, you must check the sub- layer load resistance capacity. The wall must be dried while the existing plaster layer must be cavity-free and mobile part shall be removed. You must also first prepare the sand-based sub-layers or the layers having a larger absorption capacity. The Neopor® insulation boards are mounted on the brickwork by means of adhesives/glues, dowels or mounting stands. The boards shall be installed from the lower side towards the upper side so as to make sure that they are tightly fixed to one another and that they are combined into the brickwork (avoiding intersection points). The boards that are applied on all building corners must be joined under the dovetail shape. You must make sure that the surface is flat both horizontally and vertically. Slight imperfections may be corrected by applying an adhesive/glue while the edge prominences may be smoothed by abrasion. In order to avoid fissures and to mechanically protect the façade, it is necessary that both indoor and outdoor sides be reinforced. Such procedure is performed by means of a reinforcing material and an adequate reinforcing fabric. Once the exterior insulation has completely dried, you shall apply the protection exterior layer as final adequate plastering that must be compatible with the entire system. As compared to alternative available products, Neopor® provides cost-effective advantages that have a lower environmental impact, and also ecological solutions for a modern thermal pro-tection. GRAFIPLAST with Neopor® is featured under two compression- resistant versions: - EPS80GR - EPS100GRScope of use: as thermal insulation boards intended for: ventilated facades, ETICS system facades (External thermal insulation composite systems) Cutting thickness [mm]: as per SR EN823 the boards may be cut at 20, 30, 40, 50, 60, 70, 80, 90, 100,110, 120, 130, , 140, 150, 160 +/- 2 mm.

expa

nded

pol

ysty

rene

ther

mal

insu

lati

on m

ater

ials

20


EPS150 FIRE RETARDANT EXPANDED POLYSTYRENE BOARDSField of use: As thermal insulation boards, for: - high static load spaces - walk-on terraces, under average traffic flooringCutting thickness [mm]: as per SR EN823 ... 20, 30, 40, 50, 60, 70, 80, 90, 100, 110, 120, 130, 140, 150, 160 +/- 2 mm T2


EPS200 FIRE RETARDANT EXPANDED POLYSTYRENE BOARDSField of use: As thermal insulation boards, for: - highly increased static load spaces - walk-on terraces -under heavy and average traffic flooring - refrigerator rooms flooringCutting thickness [mm]: as per SR EN823 ... 20, 30, 40, 50, 60, 70, 80, 90, 100, 110, 120, 130, 140, 150, 160 +/- 2 mm T2

Technical characteristics:Board size length x width [mm]) .............................................. 1000 x 500 mm +/- 3 mm L2 x W2Perpendicularity, as per SR EN 824 .................................................................. +/- 2mm /1 m S2Evenness, as per SR EN 824 .................................................................................... +/- 5 mm P4Bending resistance, as per SR EN 12089 ............................................................. BS250 BS≥250Compressive stress at a 10%, deformation, as per SR EN 826 ……………....... CS10(200) CS≥200Traction resistance, as per SR EN 1607 ................................................................ TR150 TR≥150Thermal conductivity [W/m•K] .............................................................................................. 0,032Adustion class, as per SR EN 13501-1 ....................................................................... Euroclass E

IPS INJECTED EXPANDED POLYSTYRENE PERIMETER BOARDSField of use: Intended for wall and flooring insulation against heated spaces adjacent to ground/soil. The boards are

made by means of EPS- injecting machines. The surface on one side is provided with drainage striations under a rhomboid structure. Perimeter step rabbet (SF) guarantees a thermal bridge-free insulation.

Competitive advantages: - extremely low water absorption, due to a very good juncture of expanded particles; - very good resistance due to high volumetric density; - 10 % better thermal insulation as compared to the regular expanded EPS boards.Board sizes [mm]: Perimeter thermal insulation board FF 30mm 1265 x 615 mm; 12,00 m² (0,360 m³)/Pack Perimeter thermal insulation board SF 40mm 1265 x 615 mm; 9,00 m² (0,3600 m³)/Pack Perimeter thermal insulation board SF 50mm 1265 x 615 mm; 7,50 m² (0,3750 m³)/PackCutting thickness [mm]: 30; 40; 50 mm

MW MINERAL WOOL / BASALT MINERAL WOOLField of use: Mineral wool has been used in the building industry for over 60 years and has proved to be a safe, efficient

and accessible insulation method. The wool insulation is of high performance and provides noise and fire protection as well as advantages such as power savings, and thus has all the insulation and mechanical relevant characteristics. The excellent thermal insulation properties allow for the reduction of home heating or chilling costs. Since it is made of natural materials-sand, gross side materials – broken glass – it helps reduce the power consumption and the atmosphere-released pollution emission, but also reduce the weight on the base structure. The product resistance allows for an increased material compression and guarantees that the product resumes its declared thickness, thus transportation, storage and warehousing costs are significantly reduced.

Characteristics: Mineral wool mattress featured as material rolls, thickness: from 50 mm, length: 10 m. - thermal conductivity: λ = 0,040 W/mK - fire resistance class A1

Basalt mineral wool board featured as rigid boards, thickness: from 20 - 200 mm, density 140 - 180 kg / m³. - thermal conductivity: λ = 0,035 W/mK - quality standard: SR EN 13162/2003


aterials


21

EPS-PV EXPANDED POLYSTYRENE ADDITIVE-FREE VIRGIN BEADSField of use: - flooring and foundation sub-layers, spaces between floorings, roofs and wood flooring - single layer screeds for direct gluing of flooring materials, foundations and floorings, spaces between the

floorings, roofs and wood flooring - to form biases on flat terraces and roofs, also with direct subsequent application of waterproofing coverings

(precast: synthetic and hot or cold bituminous fluids, provided these are solvent-free) - insulation of non walk-on bridges -Insulation of tarred roofs, also with subsequent direct application of waterproofing coverings (precast: synthetic

and hot or cold bituminous fluids, provided these are solvent-free) - arch filling, also for the very thick ones - roof coverings by means of asbestos-content cement boards, also with subsequent direct application of water-

proofing coverings (precast: synthetic and hot or cold bituminous fluids, provided these are solvent-free) - filling under the asphalt covering - sub-layers for industrial flooring

Specific consumption: in order to obtain 0,3 m³ of light concrete blanket/screed, with an apparent dry state density of 350 - 450 kg/ m³, please observe the following instructions:

- 1 bag of 250 liters virgin beads + 40 - 50 liters of water + 100 kg of cement

P-BLU POLITERM BLU – E.I.A ADDITIVATED EXPANDED POLYSTYRENE BEADSField of use: - flooring and foundation sub-layers, spaces between floorings, roofs and wood flooring- single layer screeds for direct gluing of flooring materials, foundations and floorings, spaces between the

floorings, roofs and wood flooring (Please see the “Politerm Blu– Piano Zero” User’s Manual)- - to form biases on flat terraces and roofs, also with direct subsequent application of waterproofing

coverings (precast: synthetic and hot or cold bituminous fluids, provided these are solvent-free)- - insulation of non walk-on bridges- - insulation of tarred roofs, also with subsequent direct application of waterproofing coverings (precast:

synthetic and hot or cold bituminous fluids, provided these are solvent-free)- - arch filling, also for the very thick ones- - roof coverings by means of asbestos-content cement boards, also with subsequent direct application

of waterproofing coverings (precast: synthetic and hot or cold bituminous fluids, provided these are solvent-free)

- - filling under the asphalt covering - - sub-layers for industrial flooring- - 3 to 6 mm granulation

Specific consumption: in order to obtain 0,3 m³ of light blanket, please follow the instructions below: - 2 bags of 420 liters Politerm Blu + water + cement (*) - 5 bags of 170 liters Politerm Blu + water+ cement (*) (*) see prescribed dosage

P-BLU FEIN POLITERM BLU FEIN - E.I.A ADDITIVATED EXPANDED POLYSTYRENE BEADSField of use: - Improved compression resistance - flooring and foundation sub-layers, spaces between floorings, roofs and wood flooring- single layer screeds for direct gluing of flooring materials, foundations and floorings, spaces between the

floorings, roofs and wood flooring - - to form biases on flat terraces and roofs, also with direct subsequent application of waterproofing

coverings (precast: synthetic and hot or cold bituminous fluids, provided these are solvent-free)- - insulation of non walk-on bridges- - insulation of tarred roofs, also with subsequent direct application of waterproofing coverings (precast:

synthetic and hot or cold bituminous fluids, provided these are solvent-free)- - arch filling, also for the very thick ones- - roof coverings by means of asbestos-content cement boards, also with subsequent direct application

of waterproofing coverings (precast: synthetic and hot or cold bituminous fluids, provided these are solvent-free)

- - filling under the asphalt covering - sub-layers for industrial flooring - 2mm granulation

Specific consumption: in order to obtain 0,3 m³ of light blanket, please follow the instructions below: - 2 bags of 420 liters Politerm Blu + water + cement (*) - 5 bags of 170 liters Politerm Blu + water+ cement (*) (*) see prescribed dosage

expa

nded

pol

ysty

rene

ther

mal

insu

lati

on m

ater

ials

22


Mixing drum preparation

Politerm installation mixing

In order to obtain 200 liters of finished product1. water (*);2. Politerm Blu or Politerm Blu Fein(1 bag of 170 lt);3. cement (*);4. mix for 5 minutes by keeping the rotary mixing drum as horizontally

as possible;5. mixing drum emptying

In order to obtain 1 m3 of finished product:1. water (*) ;2. first bag of 420 liters Politerm Blu or Politerm Blu Fein;3. cement (*) ;4. second bag of 420 liters Politerm Blu or Politerm Blu Fein;5. keep mixing for 5 minutes;6. then pump

Agitating truck preparation1. water: as per recipe ( * ) less 20 - 30 liters (point 6)2. Politerm Blu or Politerm Blu Fein;3 mix for about 10 minutes at maximum speed4. cement (*) ;5. mix for about 10 minutes at maximum speed6. clean the feeding hopper with approx. 20-30 liters of water (which

supplements the required water quantity) 7. On the route from the concrete station to the site, the agitating truck

shall mix for 20 minutes at maximum speed and then at minimum speed.

POLITERM BLU: EXTRA-LIGHT CONCRETESExtra-light aggregates for thermal insulation mortar preparation

MIXING PROCESS STEPSMain instructions


aterials


23

* Mainly for compartmenting elements (which are not resistance structures). The project designer is in charge with the resistance calculations pursuant to local standards.

Thermal insulation floor blankets-one layer - Direct application:• Ceramic plates, stone, clinker and polished marble flooring,parquet-covered floating flooring.• Parquet- after the application of a thin layer of light blanket/screed.• Flexible flooring (moquette, PVC...),After the application of a thin layer of light blanket /screed.

Also for:• Terrace slope blankets/screeds

Building elements*• Bricks:• Cast Walls:Intermediary layer filling• leveling;• under the sand + cement blankets;• under self-leveling blankets;• under floor heating(also with direct application of the heating pipe);• arch leveling;• under industrial flooring;• under asphalt layer• between walls

Roofing• sloped roofing;• flat roofs, with or without slopes;• arched roofs;• profile sheet roofing;• asbestos-cement sheet roofing sealing;• direct application of waterproofing membranes

107

5

8

8

118

8

69

1

2

43

Complementary products

basement

3

11

2 1

9

6

10

8

5

7

foundation

4

1 2

3

4 5 6

7

8 9

10

11

APPLICATIONS AND PRODUCTS

Acrylic primer for self-leveling floor screed

TOP1Indoor or outdoorcement floor blanket

TOP2Indoor or outdoor cement floor blanket

SELF-LEVELING CEMENT-BASED SCREED 2-10 mm

FAST SELF-LEVELING CEMENT BASEDSCREED 2-10mm

adhe

sive

s for

pla

ting

adhesives for plating

24

KITS FOR JOINTING

QK-6 QUARZ KIT 2 - 6 mm

FLEXIBLE, AQUA-STATICQK-6 KIT FOR JOINTING CERAMIC PLATES 2 - 6 mm

Application: filling joints with maximum width of 2-6 mm for ceramic tiles, marble, natural stone (except aged one), granite and porcelain tiles for interior or exterior work, exposed to temperatures between -20 ° C and +80 ° C in wet or dry environments.

Consumption [kg/m²]: Tiles size (cm) 15 x 15 20 x 20 20 x 30 30 x 30 40 x 40 50 x 50 Joint of 1 mm thick 0,15 0,13 0,12 0,10 0,05 0,04 Joint of 3 mm thick 0,45 0,39 0,36 0,3 0,15 0,12 Joint of 5 mm thick 0,75 0,65 0,6 0,5 0,25 0,2Packaging: 1. Individual Package of 2 kg and 5 kg - polyethylene package laminated in three layers, with vapour barrier and ultraviolet light filter - the total thickness of the polyethylene layer is at least 0.12 mm - shelf life of the product in the original package, unopened 2 YEARS! 2. Cart-board box package that contains: - 5 bags of 5 kg - 12 bags of 2 kg 3. Euro-pallet wrapped with 28 boxes: -28 boxes x 5 bags x 5 kg = 700 kg -28 boxes x 12 bags x 2 kg = 672 kg

whi

te blue

dark

blu

e

antic

beig

elig

ht ca

ram

elda

rk ca

ram

ellig

ht br

ick-re

dda

rk br

ick-re

dch

ocolat

elig

ht - ye

llow

yellow

silver g

rey

light g

rey

dark grey

petrol grey

light brown

dark brown

black

ocean

ochre

olive

polar

retro

red

pink

terracotta

green g50

green g57

violet

Color Pallet QK-6

30 shadesQUARZ KIT 2 - 6 mm



25

The transparent area of the package shows the original color of the pre-mixed QK-6 or QK-15 used for finishing joints tiles.

very high flexibility

high resistance to traffic

low water absorption

high resistance to cracking

QK-15QUARZ KIT 5 - 15 mm

FLEXIBILE, AQUA-STATICQK-15 KIT FOR JOINTING CERAMIC TILES 5 - 15 mm

Application: filling the joints with maximum width between 5-15 mm, of ceramic tiles, tiles, marble, natural stone (except old ones), granite, porcelain tiles, for interior or exterior work, exposed to temperatures between -20 ° C and +80 ° C in wet or dry environments.

Consumption: between 0.8 to 1.5 kg / m², depending on the size of the plates and of the joints. For correct calculation of the specific consumption necessary tests are needed at the application site, on a small area.Packaging: 1. Individual package of 5 kg - laminated polyethylene package, in three layers with vapour barrier and ultraviolet light filter. - the total thickness of the polyethylene layer is at least 0.12 mm - shelf life of the product in the original package, unopened 2 YEARS! 2. Cart-board box package that contains: - 5 bags of 5 kg 3. Euro-pallet wrapped with 28 boxes: - 28 boxes x 5 bags x 5 kg = 700 kg

green

terracotta

polar

ocean

black

brown

dark grey

light grey

chocolate

caramel

beige

white

Color Pallet QK-15

12 shadesQUARZ KIT 5 - 15 mm

ther

mal

insu

lati

on sy

stem

adh

esiv

es/g

lues

thermal insulation system adhesives/glues

26

THERMAL INSULATION SYSTEMS – ADHESIVES/GLUES, SPATULA MASS

Adhesive/glue and spatula mass placing guide for thermal insulation system application.

SUPPORT SURFACE: The support surface must be clean, rigid, without detached parts and well hardened; it must also be at

least 28 days old. The surface must be checked by hammer in order to see if it presents sufficient plating resistance.

NECESSARY TOOLS: - bucket – mechanic or manual mixer; - trowel; - teethed grouter 6 x 6 mm, to 12 x 12 mm; - level instrument

PREPARATION AND PLACING METHOD: Put the powder into water and begin mixing. Both the container and the water must be clean. It is

recommended that you mix at one time a quantity that will be used within one hour. Mix energetically and preferably mechanically (attach a blade shaft to the electric boring mill) in order to obtain a creamy, homogeneous, easily processable mix, with an adequate fluidity. If you ad an insufficient water quantity, the product may loose its adhesive properties. Wait for 10 minutes to allow chemical reactions to take place and then resume firm mixing. For flat, plastered surfaces, the adhesive/glue shall be placed on the entire polystyrene board surface, by using a 10-12 mm teethed grouter then press the board onto the insulation surface. For subsidence surface, the paste shall be placed onto the polystyrene board as spots at approximately equal distances of 15 to 20 cm and on the edge as a broad stripe of 3 to 4 cm, so as to ensure at least 40-50% covering out of the entire polystyrene board surface (check periodically). The polystyrene board is then pressed onto the insulation surface. The final straight surface is obtained by pressing several boards onto the surface by means of wood or metal long straight edge. The mineral wool rigid board shall be placed on the surface by means of an 8x8 mm to 12x12mm teethed grouter. The paste is placed on the support surface in a 4 to 5 mm layer, then rake by using the teethed grouter. The paste thus placed on the support shall keep its adhesive properties for at least 20 minutes. The paste adhesive capacity is checked by touching the surface with the fingers of the aloof hand. The paste sticking to the fingers stands for an adequate adhesiveness. 24 hours after placement, the thermal and noise insulating boards must be dowelled by 4- 6 dowels/ m², and then the same adhesive must be placed on the polystyrene board or on the rigid mineral fiber board by using a 6 x 6 mm up to 10 x 10 mm teethed grouter. Starting from the top side of the surface, roll a glass fiber net provided with 5 x 5 mm up to 10x 10 mm meshes and then press on the formed stripes. Use the right side of the grouter to uniformly insert inside the adhesive/glue. The net rows shall be lapped over on portions of at least 10 cm; in case of window and door corners you must provide additional reinforcing by means of reinforcing net stripes of at least 20 cm length and width. It is recommended to use an anti-alkali treated reinforcing net weighing at least 145 g/m². The thus obtained surface shall be finished also by using the polystyrene adhesive/glue until you obtain a flat surface that is ready for decorative products application.

CAUTION: IN CASE OF HIGHLY ABSORBENT SURFACES, SUCH AS BCA, OLD OR NEW BUT HIGHLY ABSORBENT BRICK, etc, PRIOR TO POLISTIROL GLUING YOU MUST PRIME THE SURFACE BY MEANS OF A CEMENT SPRAY AND THEN LET IT DRY FOR ABOUT 2 HOURS.

SURFACE BECOMES USABLE: The surface may be covered or finished at least 72 hours later, with all organic solvent-free known materials. It is recommended that you use expanded and extruded polystyrene for insulation purposes and to cover with decorative structured plasters of the ADEPLAST® COLOR SYSTEM product range, as final finishing layer.

1. corner board mounting.2. dowel fixing.3. corner dowelling.4. corner reinforcement (net profile).5. spatula procedure (net embedment in the

spatula mass)6. net overlapping

procedure7. window and door

additional reinforce-

3

6

4

5

7

1 2

PSP POLISTIROL PREMIUM – POLYSTYRENE INTENDED ADHESIVE/GLUE AND SPATULA MASSScope of use: For thermal and noise insulation works by means of

expanded and extruded polystyrene for facades, as well as for polystyrene or rigid polyurethane ornaments gluing, for indoor or outdoor purposes. ONLY APPLY ON MINERAL SUPPORTS. DO NOT APPLY ON WOOD-EN, PLASTIC, METAL, etc SUPPORTS.

Specific consumption: board gluing: 2,5 - 3,5 kg/m² board covering: 2,5 - 3,9 kg/m² - 6x6 grouter

3,9 - 5,5 kg/m² - 8x8 grouter

Product code: pspPackaging: bags of 25 kgPallet Stand: 48 bags/pallet 1200 kgQuality Standard: SR EN 1015-12:2002

thermal insulation system

adhesives/

thermal insulation system adhesives/glues

27

PSP WHITE POLISTIROL PREMIUM WHITE – POLYSTYRENE ADHESIVE/GLUE AND SPATULA MASSScope of use: For thermal and noise insulation works by means of

extruded and expanded polystyrene for facades, as well as for polystyrene or rigid polyurethane ornament gluing, for indoor or outdoor purposes. APPLY ONLY ON MINERAL SUPPORTS. DO NOT APPLY ON WOOD, PLASTIC OR METAL, etc SUPPORTS.

Specific consumption: board gluing: 2,5 - 3,5 kg/m². board covering: 2,5 - 3,9 kg/m² - 6x6 grouter 3,9 - 5,5 kg/m² - 8x8 grouter

Product code: psp-albPackaging: bag of 25 kgPallet Stand: 48 bags/pallet1200 kgQuality Standard: SR EN 1015-12:2002

PS-ECO POLISTIROL €CO – EXPANDED POLYSTYRENE ADHESIVE/GLUEScope of use: For thermal and noise insulation works, only for

expanded polystyrene gluing, for indoor or outdoor purposes, on mineral supports (cement-lime plasters, brick, concrete).

Specific consumption: board gluing: 2,5 - 3,5 kg/m².

Product code: ps-ecoPackaging: bag of 23 kgPallet Stand: 48 bags/pallet 1104 kgQuality Standard: SR EN 1015-12:2002

PS-FA SUPER POLISTIROL – REINFORCING FIBERS ADHESIVE/GLUE AND SPATULA MASSScope of use: For expanded and extruded façade intended polysty-

rene covering (by means of spatula), for both indoor and outdoor works. By using the ADEPLAST REIN-FORCING FIBER POLISTIROL product, you shall obtain highly flexible surfaces with an increased adherence of the glass fiber net to the polystyrene board.

Specific consumption: board covering: 2,5 - 3,5 kg/m² - 6x6 grouter 3,5 - 4,5 kg/m² - 8x8 grouter

Product code: ps-faPackaging: bag of 25 kgPallet Stand: 48 bags/pallet 1200 kgQuality Standard: SR EN 1015-12:2002

OSB-KLEBER EXPANDED POLYSTYRENE ADHESIVE/GLUE FOR WOODEN SUPPORT APPLICATIONScope of use: For thermal and noise insulation by means of façade in-

tended expanded and extruded polystyrene, both indoors and outdoors, on OSB supports, as well as for thermal insulation works in extreme weather areas, where the day-night and winter-summer temperature variations are really high. O.S.B. KLEBER may also be delivered as paste version. This may be used also for ceramic plates gluing to wooden support.

Specific consumption: board gluing: 2,5 - 3,5 kg/m². board covering: 2,5 - 3,9 kg/m² - 6x6 grouter 3,9 - 5,5 kg/m² - 8x8 grouter

Product code: osbkPackaging: bag of 25 kgPallet Stand: 48 bags/pallet 1200 kgQuality Standard: SR EN 1015-12:2002

Product code: SAAP0Packaging: bucket of 25 kgPallet Stand: 24 buckets/pallet 600 kgTechnical Approval: product approved by INCERC s.a.

MW-KLEBER MINERALWOOL KLEBER – BASALT MINERAL WOOL ADHESIVE/GLUEScope of use: For thermal and noise insulation works by means of

basalt mineral wool mattresses, for indoor or outdoor purposes.

ONLY APPLY ON MINERAL SUPPORTS. DO NOT APPLY ON WOOD, PLASTIC, METAL or similar supports.

Specific consumption: 2,5 - 3,9 kg/m² - 6x6 grouter 3,9 - 5,5 kg/m² - 8x8 grouter

Product code: mw-kleberPackaging: bag of 25 kgPallet Stand: 48 bags/pallet 1200 kgQuality Standard: SR EN 1015-12:2002

drai

nage

pro

duct

s – R

ENOW

A ra

nge

drainage products- RENOWA range

28

Intended for the rehabilitation of

salts and humid-ity-affected brickworks

Intended for his-torical monuments and buildings ther-mal restoration and

drainage

RENOWA Drainage procedure

The drainage procedure implies rehabilitation of the building sections having been affected by salt, humidity and fissures, as a consequence to brick-work mortar degradation.

By using the RENOWA drainage system materials, you shall obtain a long-lasting, high quality finish.

The RENOWA system composing products perfor-mance implied the use of special raw materials, such as salt and sulphate resistant cement, special hydrophobization agents, additives intended for the creation of mortar pores of less than 30 mi-crons, etc.

RENOWA system advantages

• Salt elimination without using chemical prod-ucts• All products within the system are perfectly compatible • System is verified, with time efficiency specification (at least 20 years)• Very good adherence for each layer• System may be applied both manually and mechanically• Product high exploitability level in both cases• System products are tested within company’s own laboratory• Controlled quality products• Intended for both indoor and outdoor purposes• Water repellent mineral plasters and paints with high vapor diffusion capacity • High quality finishes resulting in extremely smooth surfaces • Also recommended for the foundation areas restoration• AEROQ certified system, pursuant to European standards

RENOWA DRAINAGE SYSTEM

drainage products – RENOWA range

drainage products- RENOWA range

29

Product code: SAGTCPackaging: bucket 24 kgPallet Stand: 24 buckets/pallet 550 kgTechnical Approval: product approved by INCERC s.a.

SAGTC ROUGH COAT FOR DECORATIVE PLASTERSScope of use: Intended for the priming of all plaster covered surfaces

(lime smoothed plasters, lime-cement, cement, spatula mass), gypsum board, painted (or with decorative plasters), new or old but well adherent, for both indoor and outdoor purposes, as a layer preceding the finishing of silicone and styrene-acrylic plasters for foundation and thermal systems.

Specific consumption: Approx.150 - 350g/m² (1kg / 3 - 6 m², depending on the treated support roughness)

5 945762 003423

SIT SILICONE DECOPLAST – STRUCTURED DECORATIVE PLASTERScope of use: Intended for impressive decorative coverings and finishes, for both indoor and outdoor works. The products may

be applied on any type of mineral supports: plaster, polishing plaster coats, concrete, brickworks, gypsum boards, etc. Professional quality, easy application, single layer.

Coloring: The product is delivered already colored by the manufacturer depending on the beneficiary’s option, and based on the ADEPLAST® color pallette, or it may be delivered in white and then later on shaded upon application by means of coloring pastes.

Specific consumption: - Smoothed plaster: 1,5 mm - 2,5 kg/m² - Scuffed plaster: 2,0 mm - 2,8 kg/m² Instructed consumption refers to perfectly flat surfaces and varies depending on the layer thickness

and the support surface characteristics. This is why our company takes no responsibility regarding the material requirements for each case in particular.

* please see page 9 for product codes and details.

Packaging: 28 kg bucket.Pallet Stand: 24 buckets/ 672 kg pallet.Quality standard: SR EN 15824:2009.

5 945762 003768

RW-W RENOWA-W PLASTER MORTAR FOR OLD BUILDINGS DRAINAGEScope of use: Drainage plaster mortar for brickwork leveling, under

manual or mechanical application. Extremely good adherence; ensures desalinization and dehumidifica-tion of salt and humidity-attacked structures. One layer thickness: 2 cm.

Specific consumption: approx.10,0 kg/m² at 10 mm applied layer thickness

Product code: RW-WPackaging: bag of 30 kgPallet Stand: 42 bag/pallet 1260 kgQuality Standard: SR EN 998-1:2011

RW-L RENOWA-L PLASTER MORTAR FOR DRAINAGE AND LEVELINGScope of use: Drainage plaster mortar for brickwork leveling, as

support layer for the RENOWA-W mortar, under both manual and mechanical application. Very god adher-ence; salt shrinkage high capacity and water vapor permeable. One layer thickness: 2 cm.

Specific consumption: approx. 10,0 kg/m² at 10 mm applied layer thickness.

Product code: RW-LPackaging: bag of 30 kgPallet Stand: 42 bag/pallet 1260 kgQuality Standard: SR EN 998-1:2011

5 945762 003751

RW-SPZ RENOWA SPRITZ CEMENT DROPScope of use: Drainage systems intended cement drop; sulphate-re-

sistant; provides brickwork salts transportation to the next plaster layers in the drainage system; manual application.

Specific consumption: approx. 3,0 - 5,0 kg/m².

Product code: RW-SPZPackaging: bag of 30 kgPallet Stand: 42 bag/pallet 1260 kgQuality Standard: SR EN 998-1:2011

Bric

kwor

k m

orta

rs

Brickwork mortars

30

BRICKWORK MORTARS

Glass brick mortar placement guide REQUIRED TOOLS: - bucket - manual or mechanic mixer - trowel - cross-type spacers

PREPARATION METHOD: Mix one 25 kg bag with approximately 4,75 - 5,5 liters of water. Put the powder into the water and then mix vigorously, preferably mechanically, until you obtain a creamy,

homogenous and easily exploitable mixture. It is recommended to mix at one time a quantity that may be used within 2 hours maximum. Wait for 10 minutes in order to allow chemical reactions to take place then resume vigorous mixing.

The mixing drum mixing time is 5 to 10 minutes.

PLACEMENT METHOD: The material shall be dispersed over the free edges of the glass brick; place a 5-10 mm spacer between the

bricks in order to get uniform joints. If the glass brick geometry so allows, also insert a steel wire armature at each brick row. Upon finishing each layer, clean the mortar excess off the bricks. 72 hours later you may perform jointing also using the ADEPLAST® MZ /GLASS glass brick mortar.

If you intend to obtain an extra finished surface, use the ADEPLAST® GU or ADEPLAST® SGC cement polishing plaster coat (super cement polishing plaster coat) for finishing

purposes. The adhesive mortar for glass brick walling- ADEPLAST® MZ-GLASS – simplifies bricking, considerably

reduces material consumption and drastically reduces work time. The cutback on the mortar layer thickness also results in the heat loss reduction!

Brickwork m

ortars

Brickwork mortars

31

BETON-FIX MONOLITHIZATION SPECIAL MORTARScope of use: –for machine foundation anchorage, metal and

concrete poles -for filling, leveling and sub-casting for concrete poles

and beams -for the anchorage of support parts for metal struc-

tures, machines, etc. - for the anchorage of structure metal elements - sub-casting works performanceSpecific consumption: approx. 1,9 - 2,0 kg / filled cavity liter

Product code: beton-fixPackaging: bag of 30 kgPallet Stand:: 42 bag/pallet 1260 kgQuality Standard:: SR EN 1504-6:2007

MZ-STICLA ALB GLASS BRICK WALLING WHITE MORTARScope of use: Intended for glass brick walls bricking. To be used at

temperatures exceeding +5°C.

Specific consumption: 1 ADEPLAST glass brick walling is enough for a 3,5 m² glass wall, with joints of an average 10 mm thickness.

Product code: mzsticla-albPackaging: bag of 25 kgPallet Stand:: 48 bag/pallet 1200 kgQuality Standard:: SR EN 998-2:2011

MZ-STICLA GLASS BRICKS WALLING MORTARScope of use: Intended for glass brick walling. To be used at tempera-

tures exceeding +5°C.

Specific consumption: 1 ADEPLAST mortar bag for glass brick walling is enough for a 3,5 m² glass wall with joints of an average 10 mm thickness.

Product code: mz-sticlaPackaging: bag of 25 kgPallet Stand:: 48 bag/pallet 1200 kgQuality Standard:: SR EN 998-2:2011

MZ-5 CONCRETE AND BRICK BLOCKS WALLING MORTARScope of use: Intended for concrete, brick or light concrete blocks

walling.

Specific consumption: approx 1,5 - 1,8 kg/m², at a 1 mm layer thickness; Approx. 156 kg of dried mortar for 1 cubic meter of hole

brick

Product code: mz5Packaging: bag of 30 kgPallet Stand:: 42 bag/pallet 1260 kgQuality Standard:: SR EN 998-2:2011

MZ-BCA BCA BLOCKS WALLING MORTARScope of use: Intended for BCA blocks and light concrete blocks.

Specific consumption: BCA size / Consumption in kg / m² of BCA / Square meters that may be built on 1 bag - 25 kg NUT and FEDER - 60x20x25 approx. 3,8 kg approx. 6,5 m² NUT and FEDER - 60x30x25 approx. 5,7 kg approx 4,3 m² Regular BCA - 60x20x25 approx 6,3 kg approx. 3,9 m² Regular BCA - 60x30x25 approx 9,5 kg approx. 2,6 m²

Product code: mzbcaPackaging: bag of 25 kgPallet Stand:: 48 bag/pallet 1200 kgQuality Standard:: SR EN 998-2:2011

Bric

kwor

k m

orta

rs

Brickwork mortars

32

BETONFIX – ADEPLAST monolithization solution

Compensated contractions monolithization-intended special fluid mortar.

TECHNICAL DATA:- color: grey- granulation: 4,0 mm maximum- composition: cement, sand, special additives- water requirement: 12% (normal consistency)-13% (fluid consistency); be tween 3.6-3.9 liters / 30 kg bag)- intended for: sub-casting and fixing, up to 60mm thickness, no contractions.

This product type may be used for machine foundation anchorage, for metal and concrete poles, for filling, leveling and sub-casting of poles and concrete beams, for support parts anchorage for metal structures, machines, structure metal ele-ments or for the sub-casting works performance.

The product preparation is carried out by inserting the powder into the water and by mixing. Both the container and the water must be clean. Mixing shall be performed at low speed and preferably mechanically, in order to avoid excessive air, until you obtain a homogenous, fluid, easily exploitable mix that is clog and agglomeration- free.

The product is packaged as 30kg bags, with a specific consumption of 1,9 - 2,0 kg/filled cavity liter.

The specific consumption is of approximately 1.9-2.0 kg/filled cavity liter, the lay-ers’ thickness goes up to 600 mm. Product applicability subsequently to water mixing is of approximately 30 minutes, at an environmental temperature of +5°C to +30°C.

The support surface must be load-bearing, hardened and at least 28 days old, clean, dust-free, adherent and compact, dried and with no fissures, cracks, greas-es, friable debris, salts. Cast the resulting mix on one side of the cavity to be filled, under continuous flow, in order to allow the air to exit the mix. After casting, the mortar shall be protect-ed against water evaporation, by spraying water over the cast surface within the first 24 hours from casting.

Structure metal elements anchorage

Support parts anchorage for metal structures, machines, etc.

Sub-casting work performance

Brickwork m

ortars

Brickwork mortars

33

Gyps

um b

oard

syst

em

Gypsum board system

34

GYPSUM BOARD SYSTEM – ADHESIVE/GLUE, JOINT FILLER, POLISHING PLASTER COAT

Gypsum boards joint filler placement guide

SUPPORT SURFACE: The product shall be applied on clean, grease-free, dust-free and impurities-free gypsum boards

(plaster boards). In case of size cut boards, deepen the joint as in a V-shape by acclive cutting the boards.

WATER MIXING APPLICABILITY: - for 1 hour REQUIRED TOOLS: - bucket - manual or mechanical mixer - spatula TOOL CLEANING: - with water, prior to hardening ENVIRONMENTAL TEMPERATURE: - between +5°C and +30°C. Avoid working under direct sun light. PLACEMENT AND PREPARATION METHOD: Insert the powder into the water. Let it rest for 2-3 minutes for maceration purposes, and then

mix vigorously and mechanically, preferably (attach a blade shaft to an electric boring mill). Keep mixing until you obtain a very creamy, easily exploitable, homogenous mix that is clog-free. The thus obtained mix is then inserted into the joints and then covered with a glass fiber stripe that is then covered with another joint adhesive/glue layer for gypsum. The adhesive/glue surface is smoothed by means of a grouter so as to obtain uniform surface for the entire board. Besides the recommendations above, it is important that all effective norms and standards be complied with. Guaranteed characteristics are based on practical experience and performed tests. Location and application specific conditions may differ from those presented herein; thus, a correct and successful use of our products is not included in our responsibility scope.

Gypsum board system

Gypsum board system

35

KGC-50 GYPSUM BOARD JOINTING FILLER KITScope of use: Intended for indoor works, for gypsum board joint

filling by means of reinforcing glass fiber stripes. ONLY APPLY ON MINERAL SUPPORTS. DO NOT APPLY ON WOODEN, PLASTIC, METAL or similar supports.

Specific consumption: 5 - 10 m filler / kg.

Product code: kgc20Packaging: bag of 20 kgPallet Stand 48 bag/pallet 960 kgProdukt Standard: SR EN 12860:2003

Product code: kgc3x5Packaging: cutie de 3 x 5 kgPallet Stand 32 cutii/pallet 480 kgProdukt Standard: SR EN 12860:2003

Product code: kgc05Packaging: pungă de 5 kgPallet Stand 96 png./pallet 480 kgProdukt Standard: SR EN 12860:2003

GLET-FIX POLISHING PLASTER COAT COMPOSITION FOR GYPSUM BOARDS COATINGScope of use: Intended for gypsum board surfaces finishing inside

housing buildings, in order to obtain extremely fine and smooth surfaces, which may then be covered basically with any paint type.

ONLY APPLY ON MINERAL SUPPORTS. DO NOT APPLY ON WOODEN, PLASTIC, METAL or similar supports.

Specific consumption: approx. 0,5 kg/m².

Product code: gletfixPackaging: bag of 20 kgPallet Stand 48 bag/pallet 960 kgProdukt Standard: SR EN 12860:2003

AGC GIPSCARTON FIX – GYPSUM BOARD GLUING ADHESIVEScope of use: Intended for the gluing of gypsum boards on mineral

support. The support surface may be concrete, brick, voussoirs, BCA, ceramic blocks, mechanically resistant plaster, etc. ONLY APPLY ON MINERAL SUPPORTS. DO NOT APPLY ON WOODEN, PLASTIC, METAL or similar supports.

Specific consumption: 5kg/m2 depending on the support surface specific conditions

Product code: agcPackaging: bag of 25 kgPallet Stand 48 bag/pallet 1200 kgProdukt Standard: SR EN 12860:2003

Floo

r scr

eeds

, ind

ustr

ial fl

oorin

g

Floor screeds, industrial flooring

36

FLOOR SCREEDS AND INDUSTRIAL FLOORING

Self-levelling floor screed placement guide SUPPORT SURFACE: The support surface must be hardened and at least 28 days old, clean, dried, fissure and crack-free, adher-

ent and compact, grease-free; it must not have any chemical adhesive debris left from existing covering removal, no friable debris, no salts, with a minimum 150 mark. The surface must be dusted, mechanically and chemically cleaned (if applicable) until you obtain a load-bearing layer that is perfectly adherent and clean.

The next step is to cast an ADEPLAST® ACRYLIC PRIMER layer that connects the concrete layer to the self-leveling screed and uniforms the sub-layer absorption level. In case of completely non-adherent surfaces (such as old floor tiles, mosaic, shiny smoothed cement, etc), previously apply a two-component epoxy primer in order to create a connection bridge between the sub-layer and the self-leveling floor creed (please consult with the epoxy products manufacturers).

REQUIRED TOOLS: - bucket – mechanic or manual mixer - trowel; - rubber pin roller - leveling board PLACEMENT AND PREPARATION METHOD: Insert the powder into the water and begin mixing. Both the container and the water must be clean. Mix

carefully and mechanically, preferably (attach a blade shaft to an electric boring mill and mix at low speed) so as to prevent air bubbles to form inside the mix, until you obtain a creamy, homogenous and easily exploitable product. Wait for 10 minutes in order for the chemical reactions to take place. The self-leveling screed is then cast on the surface to be leveled at the consistency of a fluid sour cream; then level over the surface by using a trowel. No water mirror must be formed on the cast screed surface. All possible air bubbles must be eliminated from the screed surface, by means of a rubber pin roller; then level the surface by means of a broad leveling board.

SURFACE BECOMES USABLE: After no less than 24 hours, for floor tile covering. After no less than 72 hours for parquet or

moquette placing. The hardening time is extended at temperatures below 20°C. SPECIAL RECOMMENDATIONS: - do not use for heavy walk-on traffic flooring (industrial facilities) - in case the product is to be applied over the floor heating system, cut the heating at least 24 hours

before placement and restart the system only after final hardening. - in case of large surfaces, allow for dilation joints ( at distances of 4 to 7 m). - avoid self-leveling screed casting when the night temperature may drop under +5°C.

SA 2-10 2-10mm INDOOR SELF-LEVELING FLOOR SCREEDScope of use: Intended for the leveling of inside surfaces of cement

screeds and of concrete surfaces, etc., to the purpose of warm covering (linoleum, PVC slab) and moquette, parquet, floor tile covering, warehouse or basement final layer, etc.

Specific consumption: approx. 1,6 - 1,8 kg/m² at 1 mm applied layer thickness

Product code: sa210Packaging: bag of 25 kgPallet Stand: 48 bag/pallet 1200 kgProdukt Standard: SR EN 13813:2003

SAR 2-10 2-10mm FAST INDOOR SELF-LEVELING FLOOR SCREEDScope of use: Intended for the leveling of inside surfaces of cement

screeds, of concrete surfaces, etc, to the purpose of warm covering (linoleum, PVC slabs), moquette, parquet, floor tile covering, where walk-on traffic is required 3 hours after screed casting.

Specific consumption: approx. 1,5 - 1,8 kg/m² at 1 mm applied layer thickness.

Product code: sa210-rPackaging: bag of 25 kgPallet Stand: 48 bag/pallet 1200 kgProdukt Standard: SR EN 13813:2003



37

TOP 1 INDOOR AND OUTDOOR CEMENT SCREED FOR HEAVY WALK-ON TRAFFIC Scope of use: Intended for regular screeds, on classic supports, as

regular screed or as base layer for the self-leveling screed, for indoor or outdoor surface leveling.


Product code: top1Packaging: bag of 30 kgPallet Stand: 42 bag/pallet 1260 kgProdukt Standard: SR EN 13813:2003

TOP 2 INDOOR AND OUTDOOR CEMENT SCREED FOR HEAVY WALK-ON TRAFFIC Scope of use: Intended for the leveling of indoor and outdoor cement

screeds and of concrete surfaces, etc, to the purpose of warm covering (linoleum, PVC slabs), moquette, par-quet and floor tile covering, for swimming pool bottom covering prior to painting, as final layer for housing facilities, basements, etc.


Product code: top2Packaging: bag of 30 kgPallet Stand: 42 bag/pallet 1260 kgProdukt Standard: SR EN 13813:2003

HB-CG HOBBY HOUSE AND GARDEN CONCRETEScope of use: Intended for repair works or reduced space concreting,

for garden and house slight improvements, where small quantities are required of this type of product.


Product code: hb-cgPackaging: bag of 30 kgPallet Stand: 42 bag/pallet 1260 kgProdukt Standard: 007-01/172-2009

NSP 0,1 - 1,0 mm BUILDING SANDScope of use: preparation of plastering mortars, floor screeds, brick-

work mortars, by adding cement and/or lime.

Specific consumption: as per the material recipes in use

Product code: nsp01Packaging: bag of 25kgPallet Stand: 48 bag/pallet 1200 kgProdukt Standard: SR EN 13139:2003

PIC300 COLORED INDUSTRIAL FLOORINGScope of use: To be used in order to obtain long lasting and resistant

flooring, inside industrial facilities and intensive walk-on traffic (stores, schools, hospitals, etc).

Specific consumption: approx. 4 - 5 kg/m².

Product code: pic300Packaging: bag of 30 kgPallet Stand: 42 bag/pallet 1260 kgProdukt Standard: SR EN 13813:2003

Floor screeds semi-mechanized performance

ADVANTAGES:- increased productivity of up to 3 to 5 times- material loss and theft elimination- constant quality of prepared material- ecologic storage method (elimination of paper and plastic bags)- increased work place cleanness level

1. STORAGE The ADEPLAST silo fleet allows for the storage of 18 m³ of material under safe and ecologic conditions. Thus, we save significant bag quantities that require management and recycling.

2. TRANSPORTATION In order to transport screed dried pre-mixtures from the silo to the mixing pumps, we use m-tec F100 / F140 pneu-matic transport installations.

3. MECHANIZED MIXINGTo the purpose of water mixing as per specific recipes, we use m-tec D-20/D-30 product mixing continuous mixers.

4. FLOOR SCREED PLACEMENTThe procedure is carried out manually, as per the technol-ogies instructed under the product technical data sheets. The leveling stage may be mechanically performed by means of concrete leveling machines (helicopters).

Plas

terin

g m

orta

rs

Plastering mortars

40

KLASIKO CLASSIC PLASTERING MORTARScope of use: For indoor and outdoor coarse plastering works that

are only manually performed, in order to get plastered surfaces prior to applying the finishing plasters of the ADEPLAST® TINCI or ADEPLAST® MSF type.

Specific consumption: approx. 12,0 - 15,0 kg/m² at 1 cm thickness

Product code: klasikoPackaging: bag of 30 kgPallet Stand 42 bag/pallet 1260 kgProduct Standard: SR EN 998-2011

TINCI CLASSIC PLASTERING MORTARScope of use: For the finishing of indoor and outdoor coarse plaster-

ing works, prior to applying polishing plaster coats or other noble finishing products, in order to finish coarse plasters; repair of unleveled and fissured coarse plas-ters; fine plaster layer; surface leveling prior to faience works; surface leveling prior to applying colored noble mortar; surface leveling prior to painting.

Specific consumption: approx. 3 - 4 kg/m²

Product code: tinciPackaging: bag of 25 kgPallet Stand 48 bag/pallet 1200 kgProduct Standard: SR EN 998-1:2011

TINCI ALB CLASSIC PLASTERING WHITE MORTARScope of use: For indoor or outdoor coarse plastering finishing works,

prior to polishing plaster coat or other noble finishing products application, in order to obtain white-colored surfaces; repair of fissured and unleveled coarse plas-ters; fine plaster layer; surface leveling prior to faience works; surface leveling prior to applying colored noble mortar; surface leveling prior to painting


Product code: tinci-albPackaging: bag of 25 kgPallet Stand 48 bag/pallet 1200 kgProduct Standard: SR EN 998-1:2011

MSF EXTRA FINE, EXTRA PLASTIC MORTAR FOR PLASTERING AND REPAIRScope of use: For coarse plastering finishing works, prior to polishing

plaster coat or other noble finishing products applica-tion; indoor or outdoor, coarse plaster finishing works; repair of fissured and unleveled coarse plastering; fine plaster layer; surface leveling prior to faience applying; surface leveling prior to colored noble mortar applica-tion; surface leveling prior to painting.


Product code: msfPackaging: bag of 25 kgPallet Stand 48 bag/pallet 1200 kgProduct Standard: SR EN 998-1:2011

Manually applied plastering mortars

MINERAL PLASTERS

Plastering mortars

Plastering mortars

41

EDP-A EDELPUTZ WHITE – MINERAL DECORATIVE PLASTERINGScope of use: For the finishing of indoor or outdoor cement-based or cement-calcium lime based mineral plasters, as well as

on other mineral bases, in order to obtain “stone dust” type smoothed surfaces of up to 2,0 mm granulation.


Product code: edpalbPackaging: bag of 25 kgPallet Stand 48 bag/pallet 1200 kgProduct Standard: SR EN 998-1:2011

EDP-AN EDELPUTZ NATURE-WHITE – MINERAL DECORATIVE PLASTERINGScope of use: For the finishing of indoor or outdoor cement-based

and cement-calcium lime based mineral plastering, as well as on other mineral bases, in order to obtain “stone dust” type smoothed surfaces of an up to 2,0 mm granulation.


Product code: edpanatPackaging: bag of 25 kgPallet Stand 48 bag/pallet 1200 kgProduct Standard: SR EN 998-1:2011

HS1000 HYDROSTOP 1000 – WATERPROOFING MORTARScope of use: To be used with waterproofing plasters for high humid-

ity areas (bathrooms, kitchens, cellars, basements, etc.); it is particularly intended for water basin, swimming pool plastering works, for external wall plastering and heavy water exposure façade plastering works.

Specific consumption: approx. 12 - 16 kg/m² for each thickness cm, depending on the surface shape

Product code: hstp1000Packaging: bag of 30 kgPallet Stand 42 bag/pallet 1260 kgProduct Standard: SR EN 998-1:2011

MAI EXTRA-PLASTIC,ANTI-DAMPNESS MORTARScope of use: Intended for dampness walls, such as: bathrooms, corridors, old houses, both indoors and outdoors.

Specific consumption: approx. 10 - 18 kg/m² for each thickness cm.

Product code: maiPackaging: bag of 25 kgPallet Stand 48 bag/pallet 1200 kgProduct Standard: SR EN 998-1:2011

Plas

terin

g m

orta

rs

Plastering mortars

42

Mechanized application plastering mortars

SERVICES ADEPLAST® MOBILE SILO1. Services of silo transportation to the site, supplying and re-sup-

plying.

WHY ?

600 %

100 %

200 %

400 %

MECHANIZATION LEVEL

LOWNegative issues:: lack of spacedirt, dust, inconsistent quality, increased performance time “ADVANTAGES: Lack of skilled workers

2. Technical assistance including specialized technical support, on-site technical support, work performance follow up, SILOSER-VICE team.

3. Theory and practical training for the operating teams4. We provide the entire range of accessories, devices, spare parts

and equipments for the ADEPLAST® MOBILE SILO application.

ADEPLAST® MOBILE SILO

PRODUCTIVITY

PRODUCTIVITY

PRODUCTIVITY

PRODUCTIVITY

MECHANIZATION LEVEL

PRIMARYNegative issues: the water is manually added, mixing time – requires checking, dust, dirtADVANTAGES: cheap and easily transportable equipments,

MECHANIZATION LEVEL

AVERAGENegative issues:: dust.ADVANTAGES: controlled mixing time, controlled water dosage, Almost inexistent dust; machine

MECHANIZATION LEVEL:

ADVANCEDADVANTAGES:- 5 to 7 times increased productivity - loss and material theft elimination- constant quality of prepared material- ecological storage (eliminates plastic and paper packaging)- increased cleanness at the work place

Three-phase generator

Intervention utility vehicle

Plastering mortars

Plastering mortars

43

AMC-50 CEMENT DROP MARK 50Scope of use: Intended for concrete wall, ceramic block or highly

absorbent wall priming, as a first plastering layer, in order to even absorption and improve adherence of the following plastering layers.

Specific consumption: approx. 3 - 5 kg/m².

Product code: amc50Packaging: bag of 30 kgPallet Stand: 42 bag/pallet 1260 kgProduct Standard: SR EN 998-1:2011

MTI-25 INDOOR CEMENT-LIME MORTAR FOR PLASTERING AND REPAIRSScope of use: Intended as plasters and simultaneous finishing, for

indoor purposes, under classic manual method or with plastering machines, for high humidity rooms (bathrooms, kitchens, etc) as well as for small repairs of existing plaster layers

Specific consumption: 10 - 13 kg/m² for each thickness cm.

Product code: mti-25Packaging: bag of 30 kgPallet Stand: 42 bag/pallet 1260 kgProduct Standard: SR EN 998-1:2011

MTE-35 OUTDOOR CEMENT-LIME MORTAR FOR PLASTERING AND REPAIRS Scope of use: Intended for outdoor plastering and simultaneous

finishing by classic manual methods or by means of plastering machines, in humidity rooms, as well as for small repairs of existing plastering layers.

Specific consumption: approx. 3 - 15 kg/m² for each thickness cm.

Product code: mte-35Packaging: bag of 30 kgPallet Stand: 42 bag/pallet 1260 kgProduct Standard: SR EN 998-1:2011

MTIG-20 GYPSUM-LIME POLISHING PLASTER COAT MORTARScope of use: To be used as indoor plasters and simultaneous polish-

ing plaster coating, in dry places.

Specific consumption: approx. 8 - 10 kg/m² for each applied thickness cm.

Product code: mtig-20Packaging: bag of 30 kgPallet Stand: 40 bag/pallet 1200 kgProduct Standard: SR EN 13279-1:2008

SEISMO INDOOR-OUTDOOR PLASTERING AND REPAIR MORTARScope of use: Intended as highly resistant plastering mortar, for

consolidation works – structural rehabilitation and outdoor and indoor plastering by means of the classic manual method or by special application machines, as supplied by our company.

Specific consumption: approx. 15 - 17 kg / m² for each applied thickness cm.

Product code: seismoPackaging: bag of 30 kgPallet Stand: 42 bag/pallet 1260 kgProduct Standard: SR EN 998-1:2011

Polis

hing

pla

ster

coat

s

Polishing plaster coats

44

WALL FINISHING POLISHING PLASTER COATS

SGI-20 SUPER GLET DE IPSOS, INDOOR POLISHING PLASTER COAT COMPOSITIONScope of use: Intended for the finishing of excessive humidity-free

surfaces made of concrete, light concrete, ce-ment-based and cement-lime based dried plastering, gypsum boards. It is used in order to obtain extremely fine and smooth surfaces, prior to wallpaper applica-tion, paint works or oil painting.

Specific consumption: 0,5 at 1 kg/m²

Product code sgi20Packaging: bag of 20 kgPallet Stand 48 bag/pallet 960 kgProduct Standard: SR EN 13279-1:2008

Product code sgi3x5Packaging: cutie 3 x 5 kgPallet Stand 28 cutii/pallet 420 kgProduct Standard: SR EN 13279-1:2008

Product code sgi05Packaging: pungă 5 kgPallet Stand 84 png./pallet 420 kgProduct Standard: SR EN 13279-1:2008

GM-20 T-MAX GLETUL MESERIAȘULUI FOR MECHANIZED APPLICATIONScope of use: Intended for indoor excessive humidity-free surfaces

made of concrete, light concrete, cement-based and cement-lime based dried plastering, gypsum boards. It is used in order to obtain extremely fine and smooth surfaces prior to paint works or oil painting, by means of the T-MAX 405 application machine.


Product code gm20t-maxPackaging: bag of 20 kgPallet Stand 48 bag/pallet 960 kgProduct Standard: SR EN 13279-1:2008

GM-20 GLETUL MESERIAȘULUI, INDOOR POLISHING PLASTER COAT COMPOSITIONScope of use: Intended for indoor finishing of excessive humidity –

free surfaces that are made of concrete, light concrete, cement-based dried plasters, cement-lime plasters, gypsum boards. It is used in order to obtain extremely smooth, fine surfaces prior to paint works or oil paint-ing.


Product code gm25Packaging: bag of 20 kgPallet Stand 48 bag/pallet 960 kgProduct Standard: SR EN 13279-1:2008

Product code gm4x5Packaging: cutie 4 x 5 kgPallet Stand 28 cutii/pallet 560 kgProduct Standard: SR EN 13279-1:2008

Product code gm05Packaging: pungă 5 kgPallet Stand 112 png./pallet 560 kgProduct Standard: SR EN 13279-1:2008

Product code SAGL0Packaging: bucket 25 kgPallet Stand 24 buckets/pallet 600 kgProduct Standard: Approved by INCERC s.a.



45

IC-90 CONSTRUCTION/BUILDING GYPSUMScope of use: Intended for wall electric installations fixing works, for

hole filling, little repairs of support surfaces as well as leveling, various construction works, only for indoor purposes.

Specific consumption: Depending on the use manner.

Product code ic-90Packaging: bag of 20 kgPallet Stand 48 bag/pallet 960 kgProduct Standard: SR EN 13279-1:2008

IM-99 MOULDING GYPSUM Scope of use: For wall electric installations fixing works, hole filling,

little repairs to support surfaces as well as leveling, only for indoor purposes, model casting, statues, moulds, etc

Specific consumption: Depending on the use manner.

Product code im9920Packaging: bag of 20 kgPallet Stand 48 bag/pallet 960 kgProduct Standard: SR EN 13279-1:2008

Product code im99-3x5Packaging: cutie 3 x 5 kgPallet Stand 28 cutii/pallet 420 kgProduct Standard: SR EN 13279-1:2008

Product code im99-05Packaging: pungă 5 kgPallet Stand 84 png./pallet 420 kgProduct Standard: SR EN 13279-1:2008

GU INDOOR AND OUTDOOR ALL PURPOSE CEMENT-BASED POLISHING PLASTER COATScope of use: Intended for the finishing of indoor and outdoor sur-

faces made of concrete, light concrete, cement-based and cement-lime based dried plastering. It is used in order to obtain extremely fine and smooth surfaces, in high humidity facilities and for outdoor purposes, being anti-mold polishing plaster coat.

Specific consumption: 0,5 at 1 kg/m² at 1 mm thickness applied layer.

Product code GU20Packaging: bag of 20 kgPallet Stand 48 bag/pallet 960 kgProduct Standard: SR EN 998 - 1:2011

SGC INDOOR AND OUTDOOR SUPER CEMENT POLISHING PLASTER COATScope of use: Intended for the finishing of indoor and outdoor surfac-

es made of concrete, light concrete, cement-based and cement-lime based plastering, where the risk exists for a humid ambient after application (such as bathrooms (bathrooms, kitchen, indoor swimming pools, etc). It is used in order to obtain extremely fine and smooth surfaces.

Specific consumption: 0,5 at 1 kg/m² at 1 mm of thickness applied layer.

Product code sgc20Packaging: bag of 20 kgPallet Stand 48 bag/pallet 960 kgProduct Standard: SR EN 998 - 1:2011

Product code sgc5x5Packaging: cutie 5 x 5 kgPallet Stand 28 cutii/pallet 700 kgProduct Standard: SR EN 998 - 1:2011

Product code sgc05Packaging: pungă de 5 kgPallet Stand 140 bag/pallet 700 kgProduct Standard: SR EN 998 - 1:2011

Deco

rati

ve p

last

erin

g an

d pa

inti

ng

Decorative plastering and painting

46

Decorative plastering application guide PRODUCT DESCRIPTION: Structured decorative, outstanding, ready-to-use, water-dilution synthetic resin-based plastering.

Extra washable, elastic, flexible, waterproofing, vapor permeable scratch and hit resistant, highly to environmental aggressive factors: rain, humidity, temperature variations, sun radiation, pollu-tion, etc.

SCOPE OF USE: Intended for decorative covering and particularly impressive finishing within indoor and outdoor

works. Easy to apply on any type of mineral surface: plastering, polishing plaster coat, concrete, brickwork, plaster board, etc, in single layer.

SUPPORT SURFACE: The support surface the plastering is applied on must be dry, dusted, flat and bearing. Any prom-

inences shall be removed. Non-homogenous surfaces presenting oleaginous or any other type of substances and which may cause a harmful skin to be formed between the material and the support base, must be adequately treated.

SUPPORT SURFACE PREPARATION: Before beginning and based on the determined material needs, you must prepare the quantity

as required for the entire surface. Continuous surfaces must be covered by material belonging to the same batch or by buckets from different batches that have been previously mixed. The mixing is performed by means of a mixer that is attached to a drill press. Before applying the decorative material to the surface, it is necessary that you apply an adequate primer layer and such process must be performed at least 24 hours prior. You shall use a primer of the same color as the colored plastering.

PREPARATION AND APPLICATION METHOD For smoothed plastering ( of 1.0mm, 1.5mm, 3.0mm) and scuffed plastering (of 2.0mm, 3.0mm). Use stainless steel grouter when applying (metal plasterer’s hawk) in a layer as thin as possible (optimum

thickness of the layer as closer to the granule diameter as possible). The structuring (getting specific appear-ance) is performed by using a plastic plasterer’s hawk (structuring plate). In case of the smoothed plastering, the structuring shall be carried out uniformly until you obtain the raised appearance and the desired ap-pearance: granulated, calcium type. As for the scuffed plastering, you may select flute sizing, direction and shape depending on the manner (direction) of the structuring (e.g. vertical, horizontal, round, irregular, etc). Always remove excess material off the plasterer’s hawk. In order to avoid grey modification of the surface color, avoid smoothing for too long a time. The application must be continuous since, in case of a prolonged waiting, the material starts drying out and thus the exploitability thereof starts reducing. Structure forma-tion must be carried out immediately after application, before drying out. The product may be diluted with no more than 300 ml of drinkable water.

For roll-on plastering The application shall be performed by using a stainless steel teethed 4 mm grouter; then the material must

be uniformly dispersed by means of a structure rough sponge roll (hole- surfaced), vertically and then hori-zontally. The last roll operation must be performed from top to bottom. The time interval elapsing between the application and the structuring must be as short as possible, because otherwise the material begins to fry out and its exploitability is thus reduced. Plastering application under optimum conditions requires an air and support surface temperature of +5°C and + 30°C. Further more, the plastering shall not be applied di-rectly under the sun rays or during strong wind conditions or when raining or freezing risks exist, since same may cause fissures and color differences during the application. Upon application completion, the exterior surfaces shall be protected against the rain until full drying (48 h at 20°C). In case of any colored decorative plastering, the joints and color combinations must be performed by using paper self-adhesive straps. Prod-

Decorative plastering texture type

Decorative plastering texture type

DECORATIVE PLASTERING AND PAINTING



47

VAT DECOPLAST ECO – ECONOMIC STRUCTURED DECORATIVE PLASTERScope of use: Intended for impressive effect decorative covering and finishing works for both indoor and outdoor purposes. It

may be applied on any type of mineral surfaces: plasters, polishing plaster coats, concrete, brickwork, gypsum board, etc. Professional quality, application ease, single layer.

Coloring: The product may be delivered as already colored by the manufacturer depending on the beneficiary’s option, based on the ADEPLAST® color pallette or it may delivered on white color and it shall be subsequently shaded by means of coloring pastes..

Specific consumption: - Smoothed plaster: 1,5 mm - 2,5 kg / m² - Scuffed plaster: 2,0 mm - 2,8 kg / m² Instructed consumption refers to perfectly flat surfaces and varies depending on the applied layer thickness

and on the support surface characteristics. This is why we may not take any responsibility concerning the material requirements for each case in particular.

TROWELED PLASTER 1,5 mm

Product code VATD15B2Granulation: 1.5mmBase type: intermediary - B2Packaging: bucket 28 kgPallet Stand 24 buckets/pallet 672 kgProduct Standard: SR EN 15824:2009

Product code VATD15B3Granulation: 1.5mmBase type: transparentă - B3Packaging: bucket 28 kgPallet Stand 24 buckets/pallet 672 kgProduct Standard: SR EN 15824:2009

B2 - intermediary base, pastel colors

B3 -transparent base, pastel colors

Product code VATZ20B2Granulation: 2.0mmBase type: intermediary - B2Packaging: bucket 28 kgPallet Stand 24 buckets/pallet 672 kgProduct Standard: SR EN 15824:2009

Product code VATZ20B3Granulation: 2.0mmBase type: transparentă - B3Packaging: bucket 28 kgPallet Stand 24 buckets/pallet 672 kgProduct Standard: SR EN 15824:2009

SCRATCHED PLASTER 2,0 mmB2 - intermediary base, pastel colors

B3 -transparent base, pastel colors

SAT DECOPLAST – STRUCTURED DECORATIVE PLASTERScope of use: Intended for impressive effect decorative covering and finishing within both indoor and outdoor works. It may

be applied on any type of mineral surface: plaster, polishing plaster coat, concrete, brickwork, gypsum board, etc. Professional quality, application ease, single layer.

Coloring: The product is delivered as already colored by the manufacturer depending on the beneficiary’s option. And based on the ADEPLAST® color pallette, or it may be delivered in white color and it shall subsequently be shaded upon application by using coloring paste.

Specific consumption: - Smoothed plaster: 1,0 mm - 2,0 kg / m²; 1,5 mm - 2,5 kg / m² 3,0 mm - 3,5 kg / m² -Scuffed plaster: 2,0 mm - 2,8 kg / m²; 3,0 mm - 3,1 kg / m² - Rolled plaster: 1,5 kg ÷ 2,5 kg / m² The aforementioned consumption refers to perfectly flat surfaces and varies depending on the applied

layer thickness. This is why we may not take any responsibility concerning the material requirements for each case in particular.

Product code SATD10B1 Product code SATD10B2 Product code SATD10B3



Product code SATZ20B1 Product code SATZ20B2 Product code SATZ20B3

Product code SATZ30B1 Product code SATZ30B2 Product code SATZ30B3

Product code SATRB1 Product code SATRB2 Product code SATRB3

TROWELED-PLASTERGranunla-tion

TROWELEDPLASTERGranunla-tion

TROWELEDPLASTERGranunla-tion

SCRATCHEDPLASTERGranunla-tion

SCRATCHEDPLASTERGranunla-tion

ROLEDPLASTER


Packaging: bucket 28 kg.Pallet Stand 24 buckets/pallet 672 kg.Product Standard: SR EN 15824:2009.

Deco

rati

ve p

last

erin

g an

d pa

inti

ng


48

SAVIW MISTER WEISS INDOOR WASHABLE WHITE PAINTScope of use: Intended to paint all indoor mineral supports that

are lime, lime-cement, lime-gypsum, gypsum and concrete-based, as well as to cover the surfaces that were processed by means of dispersion paints or wallpapered, under required bearing capacity, in order to provide highly white finishing. Intended particularly for high productivi-ty finishing of indoor civil building surfaces.

Specific consumption: Approx. 0,20 - 0,30 liters/m², for 2 layers.

Product code SAVIW3LPackaging: bucket 3LPallet Stand 100 buckets/pallet 320 kgProduct Standard: Approved by INCERC s.a.



SAVI0 PROFESSIONAL’S PAINT, INDOOR WHITE PAINTScope of use: Intended to paint all indoor mineral supports that

are lime, lime-cement, lime-gypsum, gypsum and concrete-based, as well as to cover the surfaces that were processed by means of dispersion paints or wallpapered, under required bearing capacity, in order to provide highly white finishing. Intended particularly for a high productiv-ity finishing of indoor civil buildings surfaces.

Specific consumption: Approx. 0,20 - 0,30 liters/m², for 2 layers

Product code SAVI03LPackaging: bucket 3LPallet Stand 100 buckets/pallet 320 kgProduct Standard: Approved by INCERC s.a.



Dispersion–based white paints

VAVIP PROFESSIONAL’S PAINT - PROJECTScope of use: Intended to paint all indoor mineral supports that

are lime, lime-cement, lime-gypsum, gypsum and concrete-based, as well as to cover the surfaces that were processed by means of dispersion paints or wallpapered, under required bearing capacity, in order to provide highly white finishing. Intended particularly for a high productivity finishing of indoor civil buildings surfaces.


Product code VAVIP3LPackaging: bucket 3LPallet Stand 100 buckets/pallet 320 kgProduct Standard: Approved by INCERC s.a.





49

SAVI PROFESSIONAL’S SUPER PAINT, COLORING BASESScope of use: Intended to paint all indoor mineral supports that are

based on lime, lime-cement, lime-gypsum, gypsum and concrete, as well as to cover the surfaces that were processed by means of dispersion paints or wallpapered, under required bearing capacity, in order to provide highly white finishing. Intended particularly for a high productivity finishing of indoor civil buildings surfaces.

Specific consumption: Approx. 0,20 - 0,30 liters/m², for two layers




Dispersion-base paints, coloring bases

SAVE OUTDOOR PROFESSIONAL’S PAINTScope of use: Intended to paint all indoor mineral supports that are

based on lime, lime-cement, lime-gypsum, gypsum and concrete, as well as to cover the surfaces that were processed by means of dispersion paints or wallpapered, under required bearing capacity, in order to provide highly white finishing. Intended particularly for a high productiv-ity finishing of indoor civil buildings surfaces.


Product code SAVE3LPackaging: bucket 3LPallet Stand 100 buckets/pallet 320 kgProduct Standard: Approved by INCERC s.a.



VAVE OUTDOOR PROFESSIONAL’S PAINT - ECOScope of use: Intended to paint all indoor mineral supports that are

based on lime, lime-cement, lime-gypsum, gypsum and concrete, as well as to cover the surfaces that were processed by means of dispersion paints or wallpapered, under required bearing capacity, in order to provide highly white finishing. Intended particularly for a high productiv-ity finishing of indoor civil buildings surfaces.


Product code VAVE3LPackaging: bucket 3LPallet Stand 100 buckets/pallet 320 kgProduct Standard: Approved by INCERC s.a.



Deco

rati

ve p

last

erin

g an

d pa

inti

ng


50

New ProductsSGWAM SILBER GRUNDWEISS - WHITE WASHABLE PAINT WALL PRIMER

Scope of use: Intendeds to treat the mineral supports in order to reduce and homogenize the absorption capacity thereof, in case of local repair supports. Intended to adjust absorption and to improve adherence.

Intended to eliminate stained paint drying.

Specific consumption: Approx. 50 – 100 ml / m², depending on the absorption capacity and the support nature.

SEHVI SILBER EINE HAND - INDOOR WASHABLE WHITE PAINTScope of use: Intended to paint all indoor mineral supports that

are lime, lime-cement, lime-gypsum, gypsum and concrete-based, as well as to cover the surfaces that were processed by means of dispersion paints or wallpapered, under required bearing capacity, in order to provide highly white finishing. Intended particularly for high productivi-ty finishing of indoor civil building surfaces.

Specific consumption: Approx. 0,20 - 0,30 liters/m², for 2 layers.

+ =

SILBER - SUPERWHITE PAINTING SYSTEM



51

New ProductsSWVE SAUBER EXTERIOR - WHITE EXTERIOR PAINT

Scope of use: Intended to paint all indoor mineral supports that are based on lime, lime-cement, lime-gypsum, gypsum and concrete, as well as to cover the surfaces that were processed by means of dispersion paints or wallpapered, under required bearing capacity, in order to provide highly white finishing. Intended particularly for a high productiv-ity finishing of indoor civil buildings surfaces.


SWVI SAUBER INTERIOR - WHITE INTERIOR PAINTScope of use: Intended to paint all indoor mineral supports that

are lime, lime-cement, lime-gypsum, gypsum and concrete-based, as well as to cover the surfaces that were processed by means of dispersion paints or wallpapered, under required bearing capacity, in order to provide highly white finishing. Intended particularly for a high productivity finishing of indoor civil buildings surfaces.


SGAM SAUBER GRUND - WASHABLE PAINT WALL PRIMERScope of use: Intendeds to treat the mineral supports in order to reduce

and homogenize the absorption capacity thereof, in case of local repair supports. Intended to adjust absorption and to improve adherence.



SWVI SAUBER DEKOR – STRUCTURED DECORATIVE PLASTER IN 6 COLORSScope of use: Intended for impressive effect decorative covering and finishing within both indoor and outdoor works. It may

be applied on any type of mineral surface: plaster, polishing plaster coat, concrete, brickwork, gypsum board, etc. Professional quality, application ease, single layer.

Coloring: Is already aviable in 6 colors.

Specific consumption: 2,0 mm - 2,8 kg / m² 3,0 mm - 3,1 kg / m²

Deco

rati

ve p

last

erin

g an

d pa

inti

ng


52

Primers, adherence bridges

SAAM0 WASHABLE PAINT WALL PRIMERScope of use: Intendeds to treat the mineral supports in order to reduce

and homogenize the absorption capacity thereof, in case of local repair supports. Intended to adjust absorption and to improve adherence.



Product code SAAM03LPackaging: bucket 3LPallet Stand 100 buckets/pallet 320 kgProduct Standard: Approved by INCERC s.a.

Product code SAAM010LPackaging: bucket 10LPallet Stand 40 buckets/pallet 420 kgProduct Standard: Approved by INCERC s.a.

SAAMC BETONCONTACT (CONCRETE CONTACT)– ADHERENCE BOND/BRIDGEScope of use: Intended to treat smooth supports, weakly absorbent

supports or absorbent-free supports (concrete surfaces, BCA, extruded polystyrene boards, plasterboards, cement semi-finished products, etc) , in order to provide an adherence bond for the following gypsum-based plaster layers, between the gypsum-based plaster layers and for the lime-cement based plaster layers.

Specific consumption: Minimum 200 g / m² (1 kg / 4 – 5 m²), depending on the roughness of the treated support base.

Product code SAAMCPackaging: bucket 22 kgPallet Stand 24 buckets/pallet 550 kgProduct Standard: Approved by INCERC s.a.

ACAMX SELF-LEVELING CEMENT FLOORING ACRYLIC PRIMERScope of use: Synthetic resin-based product, under water dispersion, with

additives supplement; very good support adherence, fast dry off; good penetration strength; easy application.

Specific consumption: 10 – 20 m² / liter non-diluted primer

Product code ACAMX1LPackaging: flacon 1LPallet Stand 448 flac./pallet 460 kgProduct Standard: Approved by LaboratorCentral s.a

Product code ACAMX5LPackaging: bidon 5LPallet Stand 60 bid./pallet 400 kgProduct Standard: Approved by LaboratorCentral s.a.

SIGI0 RENOWA IMPREGNATION - WATERPROOFING ROUGH COAT Scope of use: – intended to treat highly humid mineral supports in order to

lower and stabilize humidity - as first layer in the RENOWA drainage/sanitation system .

Specific consumption: Approx. 100 - 200 ml/m² depending on the support nature and absorption capacity.

Product code SIGI0Packaging: bidon 5LPallet Stand 60 bid./pallet 500 kgProduct Standard: Approved by INCERC s.a.



53

Product code SAGTCPackaging: bucket 24 kgPallet Stand 24 buckets/pallet 550 kgProduct Standard: Approved by INCERC s.a.

SAGTC DECORATIVE PLASTER ROUGH COATScope of use: Intended to prime all plastered surfaces (smoothed plasters

of lime, lime-cement, cement, spatula mass ), plasterboards, painted surfaces (or with decorative plasters), new or old but with a good adherence, both indoors and outdoors, as a layer preceding the styrene-acrylic and silicone decorative plaster finishing, foundation plasters and thermal systems.

Specific consumption: Approx. 150 - 350g/m² (1kg / 3 - 6 m², depending on the treated support roughness)

5 945762 003423

ADEPLAST Color System- over 250 own colors

- over 1000 hues availableFor automatic dosage and upon paint, rough coat and decorative plaster coloring, we assist our clients by means of the HA-600, HA-450 and TM-300 automatic machines (24 canisters)

ACTSC MOZAICPLAST – FOUNDATION DECORATIVE PAINTScope of use: The product belongs to the decorative finishing product

category and is intended particularly for foundation, column, pole, etc, application, for both indoors and outdoors. It is particularly intended for professional use. The product shall be used for decorative covering and extremely impressive finishing within both indoor and outdoor works. It may be applied on any type of mineral surfaces: plasters, polishing plaster coat, concrete, brickwork, plasterboards, etc. Profes-sional quality, easy application, single layer.

Specific consumption: 4.0 - 5.0 kg/m²

Product code ACTSCPackaging: bucket 25 kgPallet Stand 24 buckets/pallet 600 kgProduct Standard: SR EN 15824:2009

Cont

ents

Contents

54

PROFESSIONAL SERIES - ADEPLAST INOVATION................................................................................................................................... 6AERIA Series - revolutionary vectors of the PORUS X ingredients. .........................................................................................................................7

APAH0 AERIA STONE with PORUS X - hydrophobic action for natural stones and facades ....................................................................7APVI AERIA with PORUS X - interior paint........................................................................................................................................7APVE AERIA with PORUS X - exterior paint .......................................................................................................................................7APT AERIA PLAST with PORUS X - decorative plaster ......................................................................................................................7

Silicon Based Paints and Decorative Plasters .......................................................................................................................................................8SIT DECOPLAST SILICONICĂ- STRUCTURED DECORATIVE PLASTER ..................................................................................................9SIVE VOPSEAUA MESERIAȘULUI - SILICON ........................................................................................................................................9

Ceramic tiles adhesives - POLYMER 1000X ................................................................................................................................................11AFX-9 SPECIAL ADHESIVE FOR CERAMIC TILES – FOR INTERIOR ........................................................................................................11AF 11 plus SPECIAL ADHESIVE FOR PORCELAIN CERAMIC TILES .........................................................................................................11

Finishing Plasters cu POGM 126 GYPSUM BASED PLASTER WITH PORUS X, FOR FINISHING WORKS ..........................................................................................11GM 127 CEMENT BASED PLASTER WITH PORUS X, FOR FINISHING WORKS ...........................................................................................11

ADHESIVES FOR TILING .......................................................................................................................................................................................12AF-I CERAMIC TILES ADHESIVE FOR INTERIOR SURFACES ................................................................................................................13AF-E CERAMIC TILES ADHESIVE FOR EXTERIOR SURFACES ...............................................................................................................13AF CERAMIC TILES ADHESIVE FOR INTERIOR / EXTERIOR SURFACES .............................................................................................14AF-N HIGH STRENGTH SUPERPLASTIC ADHESIVE ............................................................................................................................14AF-S GREY SUPERFLEXIBLE HIGH STRENGHT ADHESIVE ..........................................................................................................................14AF-S WHITE SUPERFLEXIBLE HIGH STRENGHT ADHESIVE ..........................................................................................................................14AF-11 + PORZELLANO - ADHESIVE FOR PORCELAIN TILES ....................................................................................................................14FS-57 WHITE WHITE ADHESIVE FOR NATURAL STONES ...............................................................................................................................15FS-57 GREY GREY ADHESIVE FOR NATURAL STONES .................................................................................................................................15MX WHITE WHITE ADHESIVE FOR MARBLE AND GRANITE ........................................................................................................................15 MX GREY ADHESIVE FOR MARBLE AND GRANITE ...................................................................................................................................15MH-1K MONO-COMPONENT WATERPROOF MEMBRANE .....................................................................................................................15

KITS FOR JOINTING .......................................................................................................................................................................... 16QK-6 KIT FOR JOINTING CERAMIC PLATES 2 - 6 mm .........................................................................................................................16QK-15 KIT FOR JOINTING CERAMIC TILES 5 - 15 mm ..........................................................................................................................17

THERMAL INSULATING MATERIALS .................................................................................................................................................. 18ADP70 FIRE RETARDANT EXPANDED POLYSTYRENE BOARDS .............................................................................................................18ADP80 FIRE RETARDANT EXPANDED POLYSTYRENE BOARDS .............................................................................................................18EPS70 FIRE RETARDANT EXPANDED POLYSTYRENE BOARDS ..............................................................................................................18EPS80 FIRE RETARDANT EXPANDED POLYSTYRENE BOARDS ..............................................................................................................19EPS80+ FIRE RETARDANT EXPANDED POLYSTYRENE BOARDS ..............................................................................................................19EPS100 FIRE RETARDANT EXPANDED POLYSTYRENE BOARDS ..............................................................................................................19EPS120 FIRE RETARDANT EXPANDED POLYSTYRENE BOARDS ..............................................................................................................19EPS150 FIRE RETARDANT EXPANDED POLYSTYRENE BOARDS ..............................................................................................................22EPS200 FIRE RETARDANT EXPANDED POLYSTYRENE BOARDS ..............................................................................................................22IPS INJECTED EXPANDED POLYSTYRENE PERIMETER BOARDS .......................................................................................................22MW MINERAL WOOL / BASALT MINERAL WOOL .............................................................................................................................22EPS-PV EXPANDED POLYSTYRENE ADDITIVE-FREE VIRGIN BEADS........................................................................................................23P-BLU POLITERM BLU – E.I.A ADDITIVATED EXPANDED POLYSTYRENE BEADS ...................................................................................23P-BLU FEIN POLITERM BLU FEIN - E.I.A ADDITIVATED EXPANDED POLYSTYRENE BEADS .............................................................................23

THERMAL INSULATION SYSTEMS – ADHESIVES/GLUES, SPATULA MASS .............................................................................................. 26PSP POLISTIROL PREMIUM – POLYSTYRENE INTENDED ADHESIVE/GLUE AND SPATULA MASS .....................................................26PSP WHITE POLISTIROL PREMIUM WHITE – POLYSTYRENE ADHESIVE/GLUE AND SPATULA MASS ...................................................................... 27PS-ECO POLISTIROL €CO – EXPANDED POLYSTYRENE ADHESIVE/GLUE ................................................................................................27PS-FA SUPER POLISTIROL – REINFORCING FIBERS ADHESIVE/GLUE AND SPATULA MASS ..................................................................27OSB-KLEBER EXPANDED POLYSTYRENE ADHESIVE/GLUE FOR WOODEN SUPPORT APPLICATION ..................................................................27MW-KLEBER MINERALWOOL KLEBER – BASALT MINERAL WOOL ADHESIVE/GLUE ......................................................................................27

RENOWA DRAINAGE SYSTEM ........................................................................................................................................................... 28SAGTC ROUGH COAT FOR DECORATIVE PLASTERS ...............................................................................................................................29SIT SILICONE DECOPLAST – STRUCTURED DECORATIVE PLASTER ..................................................................................................29RW-W RENOWA-W PLASTER MORTAR FOR OLD BUILDINGS DRAINAGE .............................................................................................29RW-L RENOWA-L PLASTER MORTAR FOR DRAINAGE AND LEVELING ................................................................................................29RW-SPZ RENOWA SPRITZ CEMENT DROP .............................................................................................................................................29

BRICKWORK MORTARS .................................................................................................................................................................... 30MZ-BCA BCA BLOCKS WALLING MORTAR .............................................................................................................................................31MZ-5 CONCRETE AND BRICK BLOCKS WALLING MORTAR ..................................................................................................................31MZ-STICLA GLASS BRICKS WALLING MORTAR ...........................................................................................................................................31MZ-STICLA ALB GLASS BRICK WALLING WHITE MORTAR .................................................................................................................................31BETON-FIX MONOLITHIZATION SPECIAL MORTAR .....................................................................................................................................31

Contents

Contents

55

GYPSUM BOARD SYSTEM – ADHESIVE/GLUE, JOINT FILLER, POLISHING PLASTER COAT ...................................................................... 34AGC GIPSCARTON FIX – GYPSUM BOARD GLUING ADHESIVE ..........................................................................................................35KGC-50 GYPSUM BOARD JOINTING FILLER KIT ....................................................................................................................................35GLET-FIX POLISHING PLASTER COAT COMPOSITION FOR GYPSUM BOARDS COATING ..............................................................................35

FLOOR SCREEDS AND INDUSTRIAL FLOORING ................................................................................................................................... 36 Self-levelling floor screed placement guide .............................................................................................................................................36

SA 2-10 2-10mm INDOOR SELF-LEVELING FLOOR SCREED ...................................................................................................................36SAR 2-10 2-10mm FAST INDOOR SELF-LEVELING FLOOR SCREED ...........................................................................................................36TOP 1 INDOOR AND OUTDOOR CEMENT SCREED FOR HEAVY WALK-ON TRAFFIC ...............................................................................37TOP 2 INDOOR AND OUTDOOR CEMENT SCREED FOR HEAVY WALK-ON TRAFFIC ................................................................................37HB-CG HOBBY HOUSE AND GARDEN CONCRETE .................................................................................................................................37NSP 0,1 - 1,0 mm BUILDING SAND ................................................................................................................................................37PIC300 COLORED INDUSTRIAL FLOORING ...........................................................................................................................................37

MINERAL PLASTERS ........................................................................................................................................................................ 40 Manually applied plastering mortars ......................................................................................................................................................40

KLASIKO CLASSIC PLASTERING MORTAR ...............................................................................................................................................40TINCI CLASSIC PLASTERING MORTAR ...............................................................................................................................................40TINCI ALB CLASSIC PLASTERING WHITE MORTAR ....................................................................................................................................40MSF EXTRA FINE, EXTRA PLASTIC MORTAR FOR PLASTERING AND REPAIR ......................................................................................40EDP-A EDELPUTZ WHITE – MINERAL DECORATIVE PLASTERING ........................................................................................................41EDP-AN EDELPUTZ NATURE-WHITE – MINERAL DECORATIVE PLASTERING ..........................................................................................41HS1000 HYDROSTOP 1000 – WATERPROOFING MORTAR .....................................................................................................................41MAI EXTRA-PLASTIC,ANTI-DAMPNESS MORTAR ............................................................................................................................41

Mechanized application plastering mortars ............................................................................................................................................42AMC-50 CEMENT DROP MARK 50 ........................................................................................................................................................43MTI-25 INDOOR CEMENT-LIME MORTAR FOR PLASTERING AND REPAIRS ............................................................................................43MTE-35 OUTDOOR CEMENT-LIME MORTAR FOR PLASTERING AND REPAIRS .......................................................................................43MTIG-20 GYPSUM-LIME POLISHING PLASTER COAT MORTAR ...............................................................................................................43SEISMO MORTAR INTERIOR - EXTERIOR, PENTRU TENCUIRE SI REPARAȚII ............................................................................................43

WALL FINISHING POLISHING PLASTER COATS ................................................................................................................................... 44GM-20 GLETUL MESERIAȘULUI, INDOOR POLISHING PLASTER COAT COMPOSITION ............................................................................44GM-20 T-MAX GLETUL MESERIAȘULUI FOR MECHANIZED APPLICATION ........................................................................................................44SGI-20 SUPER GLET DE IPSOS, INDOOR POLISHING PLASTER COAT COMPOSITION ..............................................................................44IC-90 CONSTRUCTION/BUILDING GYPSUM .......................................................................................................................................45IM-99 MOULDING GYPSUM .............................................................................................................................................................45GU INDOOR AND OUTDOOR ALL PURPOSE CEMENT-BASED POLISHING PLASTER COAT .................................................................45SGC INDOOR AND OUTDOOR SUPER CEMENT POLISHING PLASTER COAT ........................................................................................45

DECORATIVE PLASTERING AND PAINTING ......................................................................................................................................... 46VAT DECOPLAST ECO – ECONOMIC STRUCTURED DECORATIVE PLASTER ........................................................................................47SAT DECOPLAST – STRUCTURED DECORATIVE PLASTER .................................................................................................................47

Dispersion–based white paints ..............................................................................................................................................................48VAVIP PROFESSIONAL’S PAINT - PROJECT ..........................................................................................................................................48SAVIW MISTER WEISS INDOOR WASHABLE WHITE PAINT ...................................................................................................................48SAVI0 PROFESSIONAL’S PAINT, INDOOR WHITE PAINT .......................................................................................................................48

Dispersion-base paints, coloring bases ....................................................................................................................................................49SAVI PROFESSIONAL’S SUPER PAINT, COLORING BASES ...................................................................................................................49VAVE OUTDOOR PROFESSIONAL’S PAINT - ECO .................................................................................................................................49SAVE OUTDOOR PROFESSIONAL’S PAINT ..........................................................................................................................................49

New Products .........................................................................................................................................................................................50SGWAM SILBER GRUNDWEISS - WHITE WASHABLE PAINT WALL PRIMER ........................................................................................50SEHVI SILBER EINE HAND - INDOOR WASHABLE WHITE PAINT .........................................................................................................50SILBER - SUPERWHITE PAINTING SYSTEM ..........................................................................................................................................................50

New Products .........................................................................................................................................................................................51SWVE SAUBER EXTERIOR - WHITE EXTERIOR PAINT .......................................................................................................................51SWVI SAUBER INTERIOR - WHITE INTERIOR PAINT ..........................................................................................................................51SGAM SAUBER GRUND - WASHABLE PAINT WALL PRIMER ................................................................................................................51SWVI SAUBER DEKOR – STRUCTURED DECORATIVE PLASTER IN 6 COLORS .......................................................................................51

Primers, adherence bridges ....................................................................................................................................................................52SAAM0 WASHABLE PAINT WALL PRIMER ............................................................................................................................................52SAAMC BETONCONTACT (CONCRETE CONTACT)– ADHERENCE BOND/BRIDGE ......................................................................................52ACAMX SELF-LEVELING CEMENT FLOORING ACRYLIC PRIMER .............................................................................................................52SIGI0 RENOWA IMPREGNATION - WATERPROOFING ROUGH COAT ...................................................................................................52SAGTC DECORATIVE PLASTER ROUGH COAT .......................................................................................................................................53ACTSC MOZAICPLAST – FOUNDATION DECORATIVE PAINT .................................................................................................................53

ADEPLAST

[email protected]

Marketing

AdePlast Catalogue -English Version