7

Click here to load reader

What is Aisle Spacing?

Embed Size (px)

Citation preview

Page 1: What is Aisle Spacing?
Page 2: What is Aisle Spacing?

Why is Aisle Spacing Important?

• n factories, movement of handling equipment like trolleys and bins can be

hampered if items are scattered on the floor, or machine placements clutter the

passageway. Clearly marked, empty passageways, allow handling equipment to easily

pass through, saving time and energy.

• Hence, every workstation on the floor should keep its containers within a well-

defined boundary line, ensuring they do not encroach the allotted aisle space.

• Also, clearly marked and empty aisle spacing provides safe pathways in cases

needing emergency evacuations.

Page 3: What is Aisle Spacing?

Aisle Spacing Guidelines

Colour guidelines

Page 4: What is Aisle Spacing?

Aisle Spacing Guidelines

• Marking Line Width Guidelines

• Marking lines with width more than 2 inches are acceptable by OSHA and ANSI.OSHA Regulations require that permanent aisles and passageways must be marked. ANSI Z535.2 Safety Color Code designates yellow as the caution color. This should be used to mark points depicting physical hazards like stumbling, falling or tripping points.

• Painted lines tend to chip, peel and crack, especially in heavy traffic areas. Industrial Floor Marking Tapes are recognized as the most convenient and inexpensive way to mark floors, and there are a variety of floor marking tapes available to meet your specific needs.

Page 5: What is Aisle Spacing?

Aisle Width Guidelines

• The minimum required width depends on the utilization of the aisle. An

average width of 36 inches is acceptable in the industry. An aisle width of at

least 3 feet wider than the largest equipment to be utilized should be

implemented.

• For emergency exit points, minimum of 28 inches is the allowed width.

(According To OSHA).

Page 6: What is Aisle Spacing?

Methods for Aisle Marking

• Floor painting and use of industrial grade adhesive tapes for marking aisle spaces are the most preferred methods in the garment industry, due to their ease of use and low cost.

• The traffic and hazard level in the aisle should also be considered when choosing the method, as it affects the effective life of the marking.

• Lastly, developing detailed location plans before dedicating space to aisles is necessary to ensure free aisle spaces. To avoid any confusion on the floor, factories should use as few colors as possible and simple and bright colors are the best for this. Workers should be trained not to cover the factory’s access doors, electrical outlets and important equipment with floor markings. Also, colors and patterns too close to existing safety markings should be avoided.

Page 7: What is Aisle Spacing?

For more insight on the topics related to garment industry, visit

www.stitchdiary.com