How to protect your baby from EMR/EMF

-Brightsandz

Introduction

Babies are the most vulnerable to the risks from sustained exposure to appliance EMF (Electromagnetic Fields) and telecommunication based EMR (Electromagnetic radiation). The anatomical reason of this is because baby exo-skeleton (skull for instance) is more than a quarter times softer than a adult exo-skeleton. This increases specific absorption rate (SAR) in a baby by a factor of 50% or more. The relative lack of mobility of a infant means higher prolonged exposures complicating the crisis.

1. Use wooden cradles and bedstands

• Metal elements in your babies cradle can accumulate electrical charges from prolonged exposure to EMF from domestic sources or EMR from telecommunication devices. Therefore, a metal cradle can act as a EMR intensifier increasing the concentration of EMR around your baby. This can distort the body’s own electrical field causing uneasiness, light or broken sleep, irritability etc. Use a wooden frame cradle, bed or bedstand. Besides the aesthetics, wood is far more safer for a baby.

2. Remove the baby monitor

• A baby monitor uses a WiFi connection to beam the images of the baby. However it concentrates a lot of EMR inside the room. This is extremely dangerous for the baby. Certain baby monitors radiate250mW radiation. This is 25-50 times higher than the Bio-initiative prescribed levels from EMR exposure. Please consider removing the baby monitor immediately. If you have to use it, please use a wired system. It will reduce the exposure significantly.

3. Remove all wireless electronic devices away from the room• WiFi Router, Smartphone, Tablet, Laptop are barred in a room where a

new born baby is sleeping. Also make sure that invertors, stabilizers, microwave ovens are not in the immediate vicinity – please house appliances as far from the baby room as possible

4. Choose your baby’s room very carefully

• Look around outside from the baby’s room – if there are any cell towers in vicinity (150 metres), please don’t choose the room for your baby. We would advise that there be at-least 500 metresdistancebetween your baby’s room and the cell phone tower

5. Get a EMF/EMR audit done – to assess the exposures at your home checked

• Call Brightsandz at 9136002776 to get your home EMR and EMF assessment done. Your EMF/EMR audit can give you sharp and surprising data on your EMR/EMF outages and exposures.

• Like us on facebook- www.facebook.com/brightsandz

• Follow us on Twitter- www.twitter.com/brightsandz

www.brightsandz.com