What You Can Do When You Experience Shocks in Contact

Spooky2 What You Can Do When You

Experience Shocks in Contact Mode

Our Users & Team

Official Support Website: www.spooky2.comOfficial Purchasing Website: www.spooky2-mall.com

Email:[email protected] [email protected]

There are a number of reasons one would experience shocks, and a number of

ways to avoid it. Please review to see if this applies to your situation.



1. Low Frequencies. Anything under 10000 Hz is very likely to cause a reaction

due to this frequency range having a high probability to react with your nervous

system, causing involuntary muscle contractions.

Remedy: Use Reduce Amplitude < 10 kHz setting as depicted in the User

Guide.



2. High Voltage. There has to be enough current to also engage the nervous

system; however, there also has to be enough voltage to penetrate the

resistance of the skin. When the frequencies are low, there is a way to find the

happy medium.

Remedy: Use Amplitude Ramp 5 Seconds (UP/Down) to gently start and end

each frequency. Recommend one uses this with Reduce Amplitude < 10 kHz

settings as also depicted in the User Guide.



3. I still feel too much when applying both #1 and #2.

Remedy: Plug into the CS port of the Boost. This has a resistor that will limit

current, yet still provide a proper contact treatment.



4. Wired to more than one generator. Current from multiple generators finding the

ir pathway back into one generator.

Remedy: Do not use more than one generator in contact mode at a time.



5. Possibility that the TENS pads are no longer good. Small area of contact to th

e skin will result in an increased sensitivity to the electrical current flow.

Remedy: Replace TENS pads.



In the unlikely event that your generator has somehow started to short circuit, whi

ch can be verified by contacting customer support, they would be able to further

address the issue should none of the above apply.



Thank you!

Health & Medicine

What You Can Do When You Experience Shocks in Contact