How Much Amplitude Should I Use

Spooky2 How Much Amplitude Should I Use

Our Users & Team

Official Support Website: www.spooky2.comOfficial Purchasing Website: www.spooky2-mall.com

Email:[email protected] [email protected]

The recommendations in the user guide are as follow:

Contact Mode - Amplitude: 14-20 volts.

Remote Mode - Amplitude: 5-20 volts.

Note: Don't forget to check the reduced amplitude feature if using contac

t.



It is found that you don't need to muster up as much as power and lower voltages may even gauge their effectiveness sometimes.

More amplitude may not be always better on remote treatments.Square H Bomb was the most effective waveform for me concerning the detox protocols. When I looked closer, at 20v amplitude, the spikes are what hit at that voltage. The main waveform was 1/4 of this. It was effectively a waveform that ran at 5v.

While high amplitudes are suggested for contact treatments to overcome the resistance of the human body, play with the voltage on your remote programs.



If you have been trying something for a few days with little or n

o results, maybe the first thing you can try adjusting is the volt

age. Try 5 or 10. You might find it works better. This is not a h

ard rule and in some cases, 20v is still probably more applicab

le (spiked waveforms, harmonic waveforms, etc..)

However, if you have a simple square wave, sine wave, or eve

n one of the sawtooths, give 5v a shot.



When working on remote treatments, remember a few guidelines as well.

1. Set Repeat Each Set = 4 (for frequency repeatability)

2. Try not to stack too many frequency sets. Total program loop time should be within 4-6 hrs or less (for frequency repeatability)

3. Give the program at least a day to see if it is making a difference before changing something.

4. Try to change 1 variable at a time. This will allow you to track what works and what doesn't work for you better.





Thank you!

Health & Medicine

How Much Amplitude Should I Use