Click here to load reader
Upload
orien-dental
View
827
Download
2
Embed Size (px)
DESCRIPTION
Sterilization and disinfection is an important technique to cure the medical instruments. This helps to kill bacteria’s are 1000c.
Citation preview
Few tips about Autoclave Sterilization
Sterilization is a process for disinfecting equipments. One should know little about
sterilization. The first autoclave device was created in 1979 by French microbiologist
Charles chamberlain. It works on the principal, boiling point of water increases when
it is below pressure.
Autoclave sterilization is a pressure tank or tube, which has the potential to reach a
temperature up to 1000c. The autoclave is also used in industries to disinfect some
products during manufacturing process.
To kill microorganisms and other infected things pressured is set to 1000c, when the
pressure rises; to the set temperature bacteria are killed. Autoclave sterilization is
mainly used for disinfecting tattooing, medical, dentistry and other instruments.
Instruments related to medical like laboratory instruments, medical waste and many
more are sterilized with the help of autoclave. You can’t use kitchen utensils to
sterilize the instruments, as they cannot reach the recommended degree. You also
need to have a regular check on autoclave sterilization, whether it is working
normally or not?
While considering which
dental sterilization pouch to be used,
you need to make sure about few
things. With autoclave sterilization,
you need to see the design and
durability of the pouch as the needles
are used for sterilization. The standard
size used by a dentist is 2.75” x 10” as
it is smallest in size. Although
sterilization pouch comes in all size,
standard once are preferred by all
dentists.
With the help of autoclave sterilization on can recycle the instruments. Sterilization
and disinfection are the process used for almost all materials. One needs to know a
proper procedure for sterilization and disinfection. Autoclave helps to sterilize
materials in a stipulated time limit, hence no need to wait for long time.
One needs to be at most careful with an autoclave device as it can be dangerous if
the device is not sealed properly, the temperature which is created inside may cause
injuries.
Before buying autoclave sterilizer you need to consider certain things in mind. Basic
thing one need to consider is the size of the device. If the size is small and is
overloaded, then the instruments will not circulate properly, and sterilization will not
be done properly. If the size of the device is large, then it will take more time to get
to the required temperature. The pouch which is used for sterilization needs to be of
proper size.
Buying standard autoclave can be little expensive than buying other cheap non
branded devices. However, cheap devices do not solve the purpose and can be
sometimes dangerous as they are not recommended by experts.
One can buy sterilization and disinfection devices through the internet or any other
medium. It depends on you, whether you want to use a branded or cheap autoclave
sterilization device.