Upload
hashim-moeen
View
216
Download
3
Tags:
Embed Size (px)
Citation preview
Biodentine™A Promising Dentine substitute
Loss of dentine is perhaps one of the major losses which restrict the integrity of the
tooth structure to a significant extent. Whether be in the coronal or radicular
portion, dentine loss must be substituted with an artificial material, which can
restore the physiological integrity of the tooth structure.
Also, the preservation and protection of the dental pulp with specific emphasis on
regeneration is the new treatment strategy in the fields of dentistry.
For many decades since 1928, calcium hydroxide (Dycal) has been standard
material for maintaining the vitality of pulp since it is capable of stimulating
tertiary dentine formation. However it has some drawbacks like poor bonding to
dentine, material resorption.
After that, hydraulic calcium silicate cements were available which showed a
bioactive dynamic interaction with dentine and pulp tissue interface.
Recently, various calcium silicate based products have been launched to the
market, one of these is Biodentine; which became commercially available in
2009 by (Gilles and Olivier in corporation with Septodont's, France).
Biodentine is a new tricalcium silicate (Ca3SiO5) based inorganic restorative
commercial cement and advertised as ‘bioactive dentine substitute’.
This material is claimed to possess better physical and biological properties
compared to other tricalcium silicate cements such as mineral trioxide
aggregate (MTA) and Bioaggregate.
A. Powder: packaged in capsule (0.7 g).
1. Tricalcium Silicate: it’s the main component.
2. Diclacium Silicate: it’s the second main component.
3. Calcium Carbonate: as filler.
4. Zirconium Oxide: responsible for radiopacity.
5. Iron Oxide: responsible for shade.
B. Liquid: packaged in pipette (0.18 ml).
1. Calcium Chloride: as accelerator.
2. Hydrosoluble polymer: (water reducing agent) maintain the balance
between low water content and consistency of mixture.
3. Water.
The calcium silicate has the ability to interact with water leading to the setting
and hardening of the cement as following:
CSH gel is considered as the matrix of the cement, and the crystals of
CaCO3 (rough and irregular) are filling the spaces between gel of cement.
Calcite (CaCO3) has two distinct functions: as an active agent (implicated
in the process of hydration) and as filler (improves the mechanical
properties of the cement).
The final result of hydration reaction includes: unreacted particles of cement
(slowing down the effect of further reaction), CSH gel, Ca (OH)2.
The powder is mixed with liquid in capsule in triturator for 30 seconds.
The setting time of Biodentine is between (9-12 minutes) due to the presence of:
Calcium Chloride as accelerator.
Hydrosoluble polymer (water reducing agent).
This represents a great improvement compared to the other calcium silicate
dental materials (MTA), which set in more than 2 hours.
There are two hypothesis or two processes may well combine, eventually in
contributing to the adhesion of the Biodentine cement to dental surface:
Physical process of crystal growth within dentine tubules leading to a
micromechanical anchor (tag) which ensuring long lasting seal.
Ion exchanges between the cement and dental tissues Biodentine - adhesive
systems.
Adhesion of Biodentine is higher than Dycal and MTA.
Mineral tags inside dentine tubules
Plugs of crystals in tubules openings
The use of hydrosoluble polymer in Biodentine composition which
reduce the amount of water which has positive influence on
density of Biodentine.
The lower porosity of Biodentine leads to higher mechanical
strength. Biodentine exhibits lower porosity than Dycal and MTA.
Biodentine contains zirconium oxide allowing identification on
radiographs Biodentine displays radiopacity.
There is a sharp increase in the compressive strength reaching more than 100
MPa in the first hour.
Then compressive strength continues to improve to reach more than 200 MPa
at 24h which is more than most glass ionomer value.
A specific feature of Biodentine is its capacity to continue improving with time
over several days until reaching 300 MPa after one month. This value becomes
quite stable and is in the range of the compressive strength of natural dentine
(297 MPa).
There is an increase in the micro hardness of Biodentine with
time.
After 1 month, hardness of Biodentine reach in the same range as
natural dentine.
The deposition of apatite like calcium phosphate crystals on the surface.
This improves interface between Biodentine and adjacent phosphate-
rich hard tissue substance. This leads to increase resistance to acid
erosion and microleakage.
Biodentine appeared resistance to
erosion and microleakage more
than MTA, Dycal and GIC.
Biodentine is associated with its ability to release hydroxyl and calcium ions.
The release of free calcium ion in Biodentine is higher than MTA and Dycal.
The high Ca release of Biodentine can be correlated with the presence of a
calcium silicate component and calcium chloride and calcium carbonate.
In addition, the fast hydration reaction of tricalcium silicate can be
correlated with high calcium release at early endpoints.
Biodentine exhibits significant amount of antibacterial activity.
Calcium hydroxide ions released from cement during setting phase
of Biodentine increases pH to 12 (alkaliniztion of medium) which
inhibits the growth of microorganisms and can disinfect the
dentine.
Biodentine is not as stable as a composite material, so that
Biodentine is not suitable as permanent enamel replacement.
However, in comparison to other Portland cement- based
products, Biodentine is stable enough to find use as a temporary
filling even in the chewing load bearing region.
Biodentine induces mineralization after its application. Mineralization
occurs in the form of osteodentine that form reparative dentine.
The ability to release calcium is a key factor for successful pulp
capping therapies because of the action of calcium on differentiation,
proliferation and mineralization of pulp cells (osteoblasts,
cementoblasts, and odontoblasts).
Ca and hydroxide ions enhances the activity of:
(((Osteopontin, Alkaline Phosphatase, Pyrophosphatase, Bone
Morphogenetic Protein-2(BMP-2) which belongs to the TGF-β)))
which helps to maintain dentine mineralization and the formation of
dentine bridge.
TGF-β1 is responsible for early mineralization of reparative dentine
that secrete from the pulp cells .
For crown and root indications.
Helps in reminerlization of dentine.
Preserves pulp vitality and promotes pulp healing.
Replaces natural dentine with the same mechanical properties.
Better handling and manipulation.
Reduced setting time.
Due to its dentine like mechanical properties, Biodentine can be used as
permanent dentine substitute (base) under a composite or amalgam especially
in deep carious teeth.
MTA cant be used as a base under restoration because it contains on aluminates
which increase the brittleness of it, while Biodentine not contains on aluminates
that results smart ideal base under restoration.
It includes direct and indirect pulp capping.
Biodentine can be used as pulp capping agent since it causes early
mineralization by release of TGF-β1 from pulpal cells to encourage pulp healing
and by odontoblast stimulation for dentine bridge formation to protect the pulp.
Histologically, Biodentine were showed complete dentinal bridge formation
(well localized pattern) and absence of inflammatory pulpal response in
contrast to Dycal that associated with tissue necrosis and inflammation during
initial period of placement.
Cell
proliferation
(arrows)
within the
pulp tissue
Reactionary
& reparative
dentine
formation
pattern
Indirect pulp
capping with
Biodentine
Direct pulp capping with
Biodentine
Pulpotomy is another vital pulp treatment method in which Biodentine is
advocated to be used. This method is widely used in pediatric dentistry and
involves the amputation of pulp chamber and the placement of a material for
the preservation of the radicular pulp tissue’s vitality. This methodology is
specifically useful and preferred when the coronal pulp tissue is inflamed and a
direct pulp capping is not a suitable option.
The rate of success of vital pulpotomy with Biodentine is higher than MTA and
Pulpotec.
Due to their good adhesion to dentine surface and fast setting time,
Biodentine is the ideal material for repairing of perforation
(bifurcation, root) after endodontic treatment. Also Biodentine can
be used in repair of root resorption, in apexification.
Many materials (amalgam, ZOE, GIC, MTA) were used as root
end filling, which have many problems.
Biodentine can be used as root end filling after apicectomy because
it has better consistency, better handling, safety and faster setting
time.
• Arora V, Nikhil V, Sharma N, Arora P. Bioactive dentine replacement. JDMS. 2013; 12(4): 51-57.
• Bakopoulou A, About I. Biodentine™, a promising bioactive material for the preservation of pulp
vitality in restorative dentistry. Septodont case studies collection. 2013; 5: 4-10.
• Cutts G. Vital pulp therapy / Pulp capping with Biodentine™. Septodont case studies collection.
2013; 5: 15-18.
• Gandolfi MG, Siboni F, Botero T, Bossu M, Riccitiello F, Prati C. Calcium silicate and calcium
hydroxide materials for pulp capping: biointeractivity, porosity, solubility and bioactivity of current
formulations. J Appl Biomater Funct Mater. 2014; 1-18.
• Gandolfi MG, Siboni F, Polimeni A, Bossu M, Riccitiello F, Rengo S, Prati C. In vitro screening of
the apatite-forming ability, biointeractivity and physical properties of a tricalcium silicate material
for Endodontics and Restorative Dentistry. Dent J. 2013; 1: 41-60.
• Malkondu O, Kazandag MK, Kazazoglu E. A review on Biodentine, a contemporary dentine
replacement and repair material. 2014; 1-10.
• Natale LC, Rodrigues MC, Xavier TA, Simoes A, de Souza DN, Braga RR. Ion release and
mechanical properties of calcium silicate and calcium hydroxide materials used for pulp capping.
Int Endod J. 2015; 48(1):89-94.
• Nowicka A, Lipski M, Parafiniuk M, Sporniak-Tutak K, Lichota D, Kosierkiewicz A, Kaczmarek
W, Buczkowska-Radlinska J. Response of human dental pulp capped with biodentine and mineral
trioxide aggregate. J Endod. 2013; 39(6):743-747.
• Priyalakshmi S, Ranjan M. Review on Biodentine - A Bioactive dentine substitute. JDMS. 2014;
13(1): 13-17.
• Rajasekharan S, Martens LC, Cauwels RGEC, Verbeeck RMH. Biodentine™ material
characteristics and clinical applications: a review of the literature. Eur Arch Paediatr Dent. 2014;
15(3):147-158.
• Sans FA, Gomez-Rojas A, Jaureguizar GD. Biodentine™ as repair material for furcal perforation:
2 case reports. Septodont case studies collection. 2013; 5: 11-14.
• SEPTODONT. Biodentine™-Active Biosilicate technology™. 2013; 1-33. (www.septodont.com).
• SEPTODONT. Biodentine™ Brochure. 2013; 1-8. (www.septodont.com).
• Singh H, Kaur M, Markan S, Kapoor P. Biodentine: A promising dentin substitute. 2014; 2(5): 1-5.
• Tran XV, Gorin C, Willig C, Baroukh B, Pellat B, Decup F, Opsahl VS, Chaussain C, Boukpessi T.
Effect of a calcium-silicate-based restorative cement on pulp repair. J Dent Res. 2012; 91(12):1166-
1171.