Serial Guide Technique

Featuring: #30

DWYER 2.2013

Fabrication of DIAGNOSTIC Guide using:

5.3 Wide Guide Sleeve

Serial Guide Sleeve Inserts

Fabrication Insert (FABIN)

Insert Removal Tool (IRT)

SURGICAL Guide in place

Serial Inserts Kits are available

Clinical view of proposed surgery site

Wax set up of #30 tooth

Hole drilled with 3/32” drill through wax up

3/32” drill in cast indicates the planned prosthetic axis.

The drill is replaced with a 3 mm guide post.

Undercuts blocked out.

Lubricating cast with petroleum jelly prior to adding Triad® Gel

5.3 Fabrication Insert (FABIN) used to center the 5.3 guide sleeve

on the guide post and to prevent Triad® Gel from entering sleeve.

Lingual view of FABIN in 5.3 mm guide sleeve with

guide sleeve cleats positioned toward the lingual surface.

Appropriate lubrication of lingual and occlusal

surfaces is required before applying Triad® Gel.

Cure each layer of Triad® Gel

2nd layer of gel extended over several of the adjacent teeth

Buccal view

illustrating gel added to just cover occlusal & lingual surface of teeth.

Fabrication insert removed leaving 5.3 mm guide sleeve

Buccal view

5.3 mm wide guide sleeve

Axial view

5.3 guide sleeve is centered over the 3/32” hole

2.25 mm insert is used for initial 2 mm drill

IRT (insert removal tool) used to remove insert from guide sleeve.

SURGICAL guide with 5.3 guide sleeve is placed over IRT

Set on a firm surface and tapped with downward pressure

to remove inserts.

5.3 wide guide sleeve is used with appropriate inserts for drill sizes.

Shown here with 4 mm insert

Appropriate inserts are used for each drill size

2.0 mm insert, for 1.8 mm drill ■ 2.7 mm insert for 2.5 mm drill …etc.

Completing the osteotomy with Astra 3.8 mm twist drill

plus 5.0 mm conical drill used in 5.3 mm sleeve without an insert.

SURGICAL guide in place

Peri-apical X-ray of SURGICAL guide alignment.

Final X-ray

Guide Right™

Products shown in this case

3/32” drill

5.3 Wide Guide Sleeve

Series of Inserts for 5.3 Guide Sleeve *next slide

5.3 Fabrication Insert (FABIN)

3 mm Guide Post

Guide Sleeve Inserts for 5.3 Guide sleeve

Insert Removal Tool (IRT)

Petroleum Jelly

Triad® Gel

Recommended Kits: 4.5 / 5.3 Serial Guide Kit

1.800.314.0065 • www.deplaque.com

Serial INSERTS for 5.3 Guide Sleeves

2.25 mm

2.6 mm

2.75 mm

3.0 mm

3.6 mm

4.0 mm

4.2 mm

4.6 mm

Guide Right™

Individual Insert Sizes Available

Order directly from > www.deplaque.com

Serial INSERTS for 4.5 Guide Sleeves

Insert Removal Tool

Fabrication Insert

FABIN INSERTS FOR 4.5 Guide Sleeve

Guide Right™

Order directly from > www.deplaque.com

Guide Right™ Surgical Guide System

Start With Precision. Place With Confidence.™

1.800.314.0065 • www.deplaque.com

fabricate ▪ evaluate ▪ correct ▪ verify ▪ place

DéPlaque