Upload
younes-elhajla
View
178
Download
0
Embed Size (px)
Citation preview
MEDICAL ADVANCED TECHNOLOGY
LARGE FRAGMENT INSTRUMENTS & STAINLESS STEEL IMPLANTS
BASIC INTRUMENT SET LARGE FRAGMENT
2 | MAT Medical Advanced Technology
MAT GmbH&Co.KG Œ 1253 revision: 02.03.3009 Friedrich-Wöhler-Str. 10 ; D-78576 Emmingen ; Tel.+49 7465 / 909 189
E-mail: [email protected] ; website: www.mat-medical.com ____________________________________________________________________________________________________________________________________________________________________________________
INSTRUCTIONS FOR USE 3. (GB) Warning: The implants described may only be used in combination with MAT products!
OSTEOSYNTHESIS – STEEL IMPLANTS
(Bone: Plates / Screws / Pins / Wires / Clips) non-sterile IMPLANT MATERIAL: Implants made from steel in accordance with ISO 5832 – 1 stainless steel ; ISO 5832 – 9 high nitrogen stainless steel
manufactured by MAT GmbH&Co.KG.
The surface of these implants is chemically passive: not magnetic.
These implants can be combined with the standardised material
provided that its composition lies within the analysis stipulated
in the ISO 5832 – 1 / ISO 5832 – 9 standard and the required specifications.
Material alloys with chrome-nickel (implant steel) components
can trigger a so-called chrome-nickel allergy by their nature; there are no
other known biocompatible hazards!
We would point out that implants only function correctly
if the following basic rules are observed:
- When selecting implants (bone: plates / screws / pins
wires / clips), care must be taken to choose the appropriate implants
on the basis of the weight and level of activity of the patient,
and the bone fracture to be treated. - Note that by making the correct choice of biomechanics the forces to
be transferred by the implants remain low. - Extreme deformation of the implants must be avoided; the cautious bending of
wires, plates and pins does not, however, lead to implant damage provided it is
done with sufficient care. - Repeated deformation should be avoided at all costs as it will fatigue the
implant material.
- The re-use of implants is absolutely forbidden
(single use). - We strongly advise you to inform patients of the advantages and disadvantages
of implants.
- Excessive strain as a result of body weight and the level of activity of the
patient should be avoided due to the limited strength of the implants.
Failure to observe these precautionary measures can
have serious consequences for the healing process. INDICATIONS These relate to the current practice of applications of implants
in osteosynthesis (e.g. see literature AO/ASIF Instruments and Implants
Texhammer*Colton ISBN 3-540-56895-6 / ISBN 0-387-56895-6).
CONTRAINDICATIONS Acute and chronic infections; muscle, nerve or vascular diseases
that endanger the affected extremity; a lack of bony tissue or
poor bone quality (e.g. severe osteoporosis); local bone tumours.
Systemic diseases and metabolic disorders; infections and falls;
drug dependence; obesity; highly physical activities together with activities
involving extreme vibrations which can lead to overstraining of the implants. NOTES The user should record and keep all information provided to the patient.
It should be checked before use whether the patient tolerates the material to be implanted.
The implants described in these instructions for use
may only be used (implanted) by surgeons with the appropriate experience. POSSIBLE NEGATIVE EFFECTS (RISKS) Failure of the fracture to heal, allergy to the material, failure of the product (break, bending),
bone deformation and refracture, infection.
REMOVAL OF IMPLANTS The implants are normally removed once the fracture has healed.
CLEANING AND STERILISATION OF UNSTERILE IMPLANTS Before use, the implants must be sterilised using a validated procedure
(autoclaved).
MAT GmbH&Co.KG VALIDATED PROCEDURES
STERILISER: Steam autoclave: Temperature = 121° to 123° Celsius; Pressure = 1-1.2 bar (15 to 17 psi) with an exposure time of
at least 30 minutes in the packaged state. STERILISER: Autoclave with prevacuum: During the prevacuum phase the air is extracted from the chamber before the steam flows in.
Standard circulation for packaged objects: 132° to 135° Celsius; Pressure = 2 – 3 bar (27 to 30 psi) with an exposure time of at least 4 to 10 minutes.
IMPORTANT NOTES: Every time the implants are used or sterilised you must first check that they function perfectly!
In the event of failure to observe these instructions or demonstrable violation, no guarantee or compensation for damages can be provided.
MAT GmbH&Co.KG Œ 1253 revision: 02.03.3009 Friedrich-Wöhler-Str. 10 ; D-78576 Emmingen ; Tel.+49 7465 / 909 189
E-mail: [email protected] ; website: www.mat-medical.com ____________________________________________________________________________________________________________________________________________________________________________________
INSTRUCTIONS FOR USE 3. (GB) Warning: The implants described may only be used in combination with MAT products!
OSTEOSYNTHESIS – STEEL IMPLANTS
(Bone: Plates / Screws / Pins / Wires / Clips) non-sterile IMPLANT MATERIAL: Implants made from steel in accordance with ISO 5832 – 1 stainless steel ; ISO 5832 – 9 high nitrogen stainless steel
manufactured by MAT GmbH&Co.KG.
The surface of these implants is chemically passive: not magnetic.
These implants can be combined with the standardised material
provided that its composition lies within the analysis stipulated
in the ISO 5832 – 1 / ISO 5832 – 9 standard and the required specifications.
Material alloys with chrome-nickel (implant steel) components
can trigger a so-called chrome-nickel allergy by their nature; there are no
other known biocompatible hazards!
We would point out that implants only function correctly
if the following basic rules are observed:
- When selecting implants (bone: plates / screws / pins
wires / clips), care must be taken to choose the appropriate implants
on the basis of the weight and level of activity of the patient,
and the bone fracture to be treated. - Note that by making the correct choice of biomechanics the forces to
be transferred by the implants remain low. - Extreme deformation of the implants must be avoided; the cautious bending of
wires, plates and pins does not, however, lead to implant damage provided it is
done with sufficient care. - Repeated deformation should be avoided at all costs as it will fatigue the
implant material.
- The re-use of implants is absolutely forbidden
(single use). - We strongly advise you to inform patients of the advantages and disadvantages
of implants.
- Excessive strain as a result of body weight and the level of activity of the
patient should be avoided due to the limited strength of the implants.
Failure to observe these precautionary measures can
have serious consequences for the healing process. INDICATIONS These relate to the current practice of applications of implants
in osteosynthesis (e.g. see literature AO/ASIF Instruments and Implants
Texhammer*Colton ISBN 3-540-56895-6 / ISBN 0-387-56895-6).
CONTRAINDICATIONS Acute and chronic infections; muscle, nerve or vascular diseases
that endanger the affected extremity; a lack of bony tissue or
poor bone quality (e.g. severe osteoporosis); local bone tumours.
Systemic diseases and metabolic disorders; infections and falls;
drug dependence; obesity; highly physical activities together with activities
involving extreme vibrations which can lead to overstraining of the implants. NOTES The user should record and keep all information provided to the patient.
It should be checked before use whether the patient tolerates the material to be implanted.
The implants described in these instructions for use
may only be used (implanted) by surgeons with the appropriate experience. POSSIBLE NEGATIVE EFFECTS (RISKS) Failure of the fracture to heal, allergy to the material, failure of the product (break, bending),
bone deformation and refracture, infection.
REMOVAL OF IMPLANTS The implants are normally removed once the fracture has healed.
CLEANING AND STERILISATION OF UNSTERILE IMPLANTS Before use, the implants must be sterilised using a validated procedure
(autoclaved).
MAT GmbH&Co.KG VALIDATED PROCEDURES
STERILISER: Steam autoclave: Temperature = 121° to 123° Celsius; Pressure = 1-1.2 bar (15 to 17 psi) with an exposure time of
at least 30 minutes in the packaged state. STERILISER: Autoclave with prevacuum: During the prevacuum phase the air is extracted from the chamber before the steam flows in.
Standard circulation for packaged objects: 132° to 135° Celsius; Pressure = 2 – 3 bar (27 to 30 psi) with an exposure time of at least 4 to 10 minutes.
IMPORTANT NOTES: Every time the implants are used or sterilised you must first check that they function perfectly!
In the event of failure to observe these instructions or demonstrable violation, no guarantee or compensation for damages can be provided.
MAT GmbH&Co.KG Œ 1253 revision: 02.03.3009 Friedrich-Wöhler-Str. 10 ; D-78576 Emmingen ; Tel.+49 7465 / 909 189
E-mail: [email protected] ; website: www.mat-medical.com ____________________________________________________________________________________________________________________________________________________________________________________
INSTRUCTIONS FOR USE 3. (GB) Warning: The implants described may only be used in combination with MAT products!
OSTEOSYNTHESIS – STEEL IMPLANTS
(Bone: Plates / Screws / Pins / Wires / Clips) non-sterile IMPLANT MATERIAL: Implants made from steel in accordance with ISO 5832 – 1 stainless steel ; ISO 5832 – 9 high nitrogen stainless steel
manufactured by MAT GmbH&Co.KG.
The surface of these implants is chemically passive: not magnetic.
These implants can be combined with the standardised material
provided that its composition lies within the analysis stipulated
in the ISO 5832 – 1 / ISO 5832 – 9 standard and the required specifications.
Material alloys with chrome-nickel (implant steel) components
can trigger a so-called chrome-nickel allergy by their nature; there are no
other known biocompatible hazards!
We would point out that implants only function correctly
if the following basic rules are observed:
- When selecting implants (bone: plates / screws / pins
wires / clips), care must be taken to choose the appropriate implants
on the basis of the weight and level of activity of the patient,
and the bone fracture to be treated. - Note that by making the correct choice of biomechanics the forces to
be transferred by the implants remain low. - Extreme deformation of the implants must be avoided; the cautious bending of
wires, plates and pins does not, however, lead to implant damage provided it is
done with sufficient care. - Repeated deformation should be avoided at all costs as it will fatigue the
implant material.
- The re-use of implants is absolutely forbidden
(single use). - We strongly advise you to inform patients of the advantages and disadvantages
of implants.
- Excessive strain as a result of body weight and the level of activity of the
patient should be avoided due to the limited strength of the implants.
Failure to observe these precautionary measures can
have serious consequences for the healing process. INDICATIONS These relate to the current practice of applications of implants
in osteosynthesis (e.g. see literature AO/ASIF Instruments and Implants
Texhammer*Colton ISBN 3-540-56895-6 / ISBN 0-387-56895-6).
CONTRAINDICATIONS Acute and chronic infections; muscle, nerve or vascular diseases
that endanger the affected extremity; a lack of bony tissue or
poor bone quality (e.g. severe osteoporosis); local bone tumours.
Systemic diseases and metabolic disorders; infections and falls;
drug dependence; obesity; highly physical activities together with activities
involving extreme vibrations which can lead to overstraining of the implants. NOTES The user should record and keep all information provided to the patient.
It should be checked before use whether the patient tolerates the material to be implanted.
The implants described in these instructions for use
may only be used (implanted) by surgeons with the appropriate experience. POSSIBLE NEGATIVE EFFECTS (RISKS) Failure of the fracture to heal, allergy to the material, failure of the product (break, bending),
bone deformation and refracture, infection.
REMOVAL OF IMPLANTS The implants are normally removed once the fracture has healed.
CLEANING AND STERILISATION OF UNSTERILE IMPLANTS Before use, the implants must be sterilised using a validated procedure
(autoclaved).
MAT GmbH&Co.KG VALIDATED PROCEDURES
STERILISER: Steam autoclave: Temperature = 121° to 123° Celsius; Pressure = 1-1.2 bar (15 to 17 psi) with an exposure time of
at least 30 minutes in the packaged state. STERILISER: Autoclave with prevacuum: During the prevacuum phase the air is extracted from the chamber before the steam flows in.
Standard circulation for packaged objects: 132° to 135° Celsius; Pressure = 2 – 3 bar (27 to 30 psi) with an exposure time of at least 4 to 10 minutes.
IMPORTANT NOTES: Every time the implants are used or sterilised you must first check that they function perfectly!
In the event of failure to observe these instructions or demonstrable violation, no guarantee or compensation for damages can be provided.
0123
MAT Medical Advanced Technology | 3
SET-011-0010-004 LARGE FRAGMENT BASIC INSTRUMENT SET
REF.-NO.: PRODUCT - DESCRIPTION PCS.:
TRAY-011-0010-004 TRAY-011-0010-004 Tray Large Fragment Basic Instrument SET-011-0010-004 (Graphic Case) -1-
005-0210-031 Drill bit - AO shaft Ø 3,2 mm x length 145 mm / 120 mm -3-
005-0210-096 Malleolar countersink Ø 3,2 mm -1-
005-0210-099 Countersink Ø 4,5 mm with T-handle and tip -1-
005-0210-044 Drill bit - AO shaft Ø 4,5 mm x length 145 mm / 120 mm -2-
005-0211-044 T-handle small with AO - quick coupling -1-
005-0211-046 Tap - AO shaft Ø 4,5 mm with cortical pitch 1,75 mm used for Ø 4,5 mm / Ø 6,5 mm screws -2-
005-0211-066 Tap - AO shaft Ø 6,5 mm with cancellouspitch 2,75 mm -1-
005-0214-015 Large hex. screwdriver - AO shaft standard (hex. flats 3,5 mm) used for Ø 4,5 mm / Ø 6,5 mm screws -1-
005-0219-006 Depth gauge large, extra long for measurement 120 mm used for Ø 4,5 mm / Ø 6,5 mm screws -1-
005-0212-026 Tap sleeve Ø 3,5 mm, also use as Ø 3,2 mm drill guide -1-
005-0212-032 Insert drill sleeve Ø 4,5 mm / Ø 3,2 mm -1-
005-0212-045 Tap sleeve Ø 4,5 mm -1-
005-0221-004 Drill sleeve for round hole Plates -1-
005-0222-044 Universal drill guide Ø 4,5 mm / Ø 3,2 mm used for tap Ø 4,5 mm and Ø 3,2 mm drill bit applicableFor neutral - load position
-1-
009-0368-035 Large hexagonal screwdriver for selfholding sleeve -1-
005-0221-012 Plates articulated tension device with joint, to tension of 20 mm also can be used as a distractor,color sale. Yellow up to 500N green up to 1000N, red over 1000N
-1-
005-0221-016 Combination wrench width across flats 11 mm used for tension device REF. 005-0221-012 -1-
005-0221-015 Socket wrench width across flats 11 mm used for tension device REF. 005-0221-012 -1-
005-0219-039 Sharp hook, length 155 mm -1-
005-0229-045 Bending templates 5 holes used for large Plates -1-
005-0229-047 Bending templates 7 holes used for large Plates -1-
005-0229-049 Bending templates 9 holes used for large Plates -1-
004-0310-020 K-wire Ø 2,0 mm x 150 mm with trocar tip and round end -10-
INDEX SET-011-0010-004 SET-LISTENING-CONTENT: INSTRUMENTS
REF.-NO.: STERILIZATION CONTAINER
C-110-135 1/1 Size container, bottom non perforated outside 580 x 280 x 135 mm / inside 550 x 265 x 115 mm
Tray-011-0010-004 Tray Large Fragment Basic Instrument SET-011-0010-004 (Graphic Case Stainless Steel)
Recommended Sterilization Container for SET-011-0010-004
SET-LISTING - CONTENT FOR SET: SET-011-0010-004
4 | MAT Medical Advanced Technology
005-0210-029 Drill bit - AO shaft Ø 3,2 mm x length 195 mm / 170 mm
005-0210-031 Drill bit - AO shaft Ø 3,2 mm x length 145 mm / 120 mm
005-0210-044 Drill bit - AO shaft Ø 4,5 mm x length 145 mm / 120 mm
005-0210-099 Countersink Ø 4,5 mm with T-handle and tip 005-0211-046 Tap AO shaft Ø 4,5 mm with cortical pitch 1,75 mm used for Ø 4,5 mm cortical screws
005-0211-066 Tap AO shaft Ø 6,5 mm with cancellous pitch 2,75 mm used for Ø 6,5 mm cancellous screws
005-0212-032 Insert drill sleeve Ø 4,5 mm / Ø 3,2 mm
005-0210-096 Malleolar countersink Ø 3,2 mm 005-0211-044 T-handle small with AO - quick coupling
005-0212-026 Tap sleeve Ø 3,5 mm, also use as Ø 3,2 drill guide 005-0214-015 Large hex. screwdriver - AO shaft standard (hex. flats 3,5 mm) use for Ø 4,5 mm / Ø 6,5 mm screws
MAT Medical Advanced Technology | 5
009-0368-035 Large hex. screwdriver used for self-holding sleeve REF. 009-0390-062
009-0390-062 Coupling self - holding sleeve for screwdriver REF. 009-0368-035
005-0212-045 Tap sleeve Ø 4,5 mm 005-0212-047 Pointed drill guide
005-0221-004 Drill sleeve for round hole plates Ø 3,2 mm 005-0222-029 Drill guide for Ø 6,5 mm / 3,5 mm used for 6,5 mm screws and Ø 3,5 mm drill bit
005-0222-044 Universal drill guide for Ø 4,5 mm / 3,2 mm used for tap Ø 4,5 mm screws and Ø 3,2 mm drill bit applica-ble for neutral - load position
005-0219-097 Screws forceps
LARGE FRAGMENT BASIC INSTRUMENTS
6 | MAT Medical Advanced Technology
005-0219-006 Depth gauge large, extra long for measurement 120 mm used for Ø 4,5 mm and Ø 6,5 mm screws
004-0310-020 K-wire Ø 2,0 mm x 150 mm with trocar tip and round end
005-0219-039 Sharp hook, length 155 mm
005-0221-012 Plates articulated tension device with join, to tension of 20 mm also can be used as a distrac-tor. Color scale: yellow up to 500N, green up to 1000N, red over 1000N
005-0221-001 Drill sleeve for tension device REF. 005-0221-012
005-0221-016 Combination wrench width across flats 11 mm used for tension device REF. 005-0221-012
005-0221-015 Socket wrench width across flats 11 mm used for tension device REF. 005-0221-012
MAT Medical Advanced Technology | 7
LARGE FRAGMENT BASIC INSTRUMENTS
005-0229-045 Bending templates 5 holes used for large Plates
005-0229-047 Bending templates 7 holes used for large Plates
005-0229-049 Bending templates 9 holes used for large Plates
005-0229-002 Large bending iron for standard plates 4,5 mm
300-2430-101 Plates bending press
300-1833-050 Bending pliers 110-0171-402 Bending iron for reconstruction plates 3,5 mm / 4,5 mm
8 | MAT Medical Advanced Technology
300-3650-016 Bending Bolt for K-wires Ø 1,25 mm up to Ø 2,5 mm
300-3649-814 Wire bending plier 300-0007-434 TC-Wire Cutter 220 mm used for soft wires Ø 3,0 mm an hard wire Ø 2,5 mm
INS-23-5005-24 Reposition bone holding forceps 24 cm / 9,5“
INS-23-5005-26 Reposition bone holding forceps 26 cm / 10 ,25”
INS-23-5005-28 Reposition bone holding forceps 28 cm / 11”
INS-8206-02 Verbrügge bone holding forceps 250 mm
INS-8206-04 Verbrügge bone holding forceps 260 mm
INS-8206-06 Verbrügge bone holding forceps 270 mm
MAT Medical Advanced Technology | 9
LARGE FRAGMENT BASIC INSTRUMENTS
010-0020-074 Self-centering bone holding forceps 240 mm
010-0020-076 Self-centering bone holding forceps 260 mm
010-0020-078 Self-centering bone holding forceps 280 mm
INS-23-4775-16 Bone reposition forceps 16 cm / 6,5”
NOTE!
ADDITIONAL GENERAL SURGICAL
ORTHOPEDIC / TRAUMATOLOGY
INSTRUMENTS ARE COLLECTED AND INSTALLED
IN THE MAT – GENERAL SURGICAL INSTRUMENT
CATALOGUE
10 | MAT Medical Advanced Technology
LARGE FRAGMENT IMPLANTS
REF.-NO.: Diameter and complete Length
001-0008-012 Ø 4,5 mm x length 12 mm
001-0008-014 Ø 4,5 mm x length 14 mm
001-0008-016 Ø 4,5 mm x length 16 mm
001-0008-018 Ø 4,5 mm x length 18 mm
001-0008-020 Ø 4,5 mm x length 20 mm
001-0008-022 Ø 4,5 mm x length 22 mm
001-0008-024 Ø 4,5 mm x length 24 mm
001-0008-026 Ø 4,5 mm x length 26 mm
001-0008-028 Ø 4,5 mm x length 28 mm
001-0008-030 Ø 4,5 mm x length 30 mm
001-0008-032 Ø 4,5 mm x length 32 mm
001-0008-034 Ø 4,5 mm x length 34 mm
001-0008-036 Ø 4,5 mm x length 36 mm
001-0008-038 Ø 4,5 mm x length 38 mm
001-0008-040 Ø 4,5 mm x length 40 mm
001-0008-042 Ø 4,5 mm x length 42 mm
001-0008-044 Ø 4,5 mm x length 44 mm
001-0008-046 Ø 4,5 mm x length 46 mm
001-0008-048 Ø 4,5 mm x length 48 mm
001-0008-050 Ø 4,5 mm x length 50 mm
REF.-NO.: Diameter and complete Length
001-0008-052 Ø 4,5 mm x length 52 mm
001-0008-054 Ø 4,5 mm x length 54 mm
001-0008-056 Ø 4,5 mm x length 56 mm
001-0008-058 Ø 4,5 mm x length 58 mm
001-0008-060 Ø 4,5 mm x length 60 mm
001-0008-062 Ø 4,5 mm x length 62 mm
001-0008-064 Ø 4,5 mm x length 64 mm
001-0008-065 Ø 4,5 mm x length 65 mm
001-0008-070 Ø 4,5 mm x length 70 mm
001-0008-075 Ø 4,5 mm x length 75 mm
001-0008-080 Ø 4,5 mm x length 80 mm
001-0008-085 Ø 4,5 mm x length 85 mm
001-0008-090 Ø 4,5 mm x length 90 mm
001-0008-095 Ø 4,5 mm x length 95 mm
001-0008-100 Ø 4,5 mm x length 100 mm
001-0008-105 Ø 4,5 mm x length 105 mm
001-0008-110 Ø 4,5 mm x length 110 mm
001-0008-115 Ø 4,5 mm x length 115 mm
001-0008-120 Ø 4,5 mm x length 120 mm
Product – Description:
Stainless Steel Cortical Screw, Fullthreaded Ø 4,5 mmImportant Technical Dimensions:Head Diameter Ø 8,0 mmHexalobe Socket width 3,5 mmCore Diameter for cortical Thread Ø 3,0 mm
STAINLESS STEEL LARGE FRAGMENT DIA. 4,5 mm CORTICAL SCREW IMPLANTS
Thread Pitch 1,75 mmApplicable Drill Bit for Thread Hole Ø 3,2 mm
Material: Stainless Steel
MAT Medical Advanced Technology | 11
LARGE FRAGMENT IMPLANTS
REF.-NO.: Diameter and complete Length
001-0008-012S Ø 4,5 mm x length 12 mm
001-0008-014S Ø 4,5 mm x length 14 mm
001-0008-016S Ø 4,5 mm x length 16 mm
001-0008-018S Ø 4,5 mm x length 18 mm
001-0008-020S Ø 4,5 mm x length 20 mm
001-0008-022S Ø 4,5 mm x length 22 mm
001-0008-024S Ø 4,5 mm x length 24 mm
001-0008-026S Ø 4,5 mm x length 26 mm
001-0008-028S Ø 4,5 mm x length 28 mm
001-0008-030S Ø 4,5 mm x length 30 mm
001-0008-032S Ø 4,5 mm x length 32 mm
001-0008-034S Ø 4,5 mm x length 34 mm
001-0008-036S Ø 4,5 mm x length 36 mm
001-0008-038S Ø 4,5 mm x length 38 mm
001-0008-040S Ø 4,5 mm x length 40 mm
001-0008-042S Ø 4,5 mm x length 42 mm
001-0008-044S Ø 4,5 mm x length 44 mm
001-0008-046S Ø 4,5 mm x length 46 mm
001-0008-048S Ø 4,5 mm x length 48 mm
001-0008-050S Ø 4,5 mm x length 50 mm
REF.-NO.: Diameter and complete Length
001-0008-052S Ø 4,5 mm x length 52 mm
001-0008-054S Ø 4,5 mm x length 54 mm
001-0008-056S Ø 4,5 mm x length 56 mm
001-0008-058S Ø 4,5 mm x length 58 mm
001-0008-060S Ø 4,5 mm x length 60 mm
001-0008-062S Ø 4,5 mm x length 62 mm
001-0008-064S Ø 4,5 mm x length 64 mm
001-0008-065S Ø 4,5 mm x length 65 mm
001-0008-070S Ø 4,5 mm x length 70 mm
001-0008-075S Ø 4,5 mm x length 75 mm
001-0008-080S Ø 4,5 mm x length 80 mm
001-0008-085S Ø 4,5 mm x length 85 mm
001-0008-090S Ø 4,5 mm x length 90 mm
001-0008-095S Ø 4,5 mm x length 95 mm
001-0008-100S Ø 4,5 mm x length 100 mm
001-0008-105S Ø 4,5 mm x length 105 mm
001-0008-110S Ø 4,5 mm x length 110 mm
001-0008-115S Ø 4,5 mm x length 115 mm
001-0008-120S Ø 4,5 mm x length 120 mm
Product – Description:
Stainless Steel Cortical Screw, Fullthreaded Ø 4,5 mm, self-tappingImportant Technical Dimensions:Head Diameter Ø 8,0 mmHexalobe Socket width 3,5 mmCore Diameter for cortical Thread Ø 3,0 mm
Thread Pitch 1,75 mmApplicable Drill Bit for Thread Hole Ø 3,2 mmNote: Tapping is not applicable for this screw!Material: Stainless Steel
STAINLESS STEEL LARGE FRAGMENT DIA. 4,5 mm CORTICAL SCREW IMPLANTS, SELF-TAPPING
12 | MAT Medical Advanced Technology
REF.-NO.: Diameter and complete Length
001-0009-020 Ø 4,5 mm x length 20 mm
001-0009-025 Ø 4,5 mm x length 25 mm
001-0009-030 Ø 4,5 mm x length 30 mm
001-0009-035 Ø 4,5 mm x length 35 mm
001-0009-040 Ø 4,5 mm x length 40 mm
001-0009-045 Ø 4,5 mm x length 45 mm
001-0009-050 Ø 4,5 mm x length 50 mm
001-0009-055 Ø 4,5 mm x length 55 mm
001-0009-060 Ø 4,5 mm x length 60 mm
001-0009-065 Ø 4,5 mm x length 65 mm
001-0009-070 Ø 4,5 mm x length 70 mm
001-0009-075 Ø 4,5 mm x length 75 mm
001-0009-080 Ø 4,5 mm x length 80 mm
001-0009-085 Ø 4,5 mm x length 85 mm
001-0009-090 Ø 4,5 mm x length 90 mm
001-0009-095 Ø 4,5 mm x length 95 mm
001-0009-100 Ø 4,5 mm x length 100 mm
001-0009-105 Ø 4,5 mm x length 105 mm
001-0009-110 Ø 4,5 mm x length 110 mm
Product – Description:
Stainless Steel Malleolar Screw Ø 4,5 mmImportant Technical Dimensions:Head Diameter Ø 8,0 mmShaft Diameter 3,o mmCore Diameter for cortical Thread Ø 3,0 mm
Thread Pitch 1,75 mmApplicable Drill Bit for Thread Hole Ø 3,2 mm
Material: Stainless Steel
STAINLESS STEEL LARGE FRAGMENT DIA. 4,5 mm MALLEOLAR SCREW IMPLANT
MAT Medical Advanced Technology | 13
REF.-NO.: Diameter and complete Length
001-0010-030 Ø 6,5 mm x length 30 mm
001-0010-035 Ø 6,5 mm x length 35 mm
001-0010-040 Ø 6,5 mm x length 40 mm
001-0010-045 Ø 6,5 mm x length 45 mm
001-0010-050 Ø 6,5 mm x length 50 mm
001-0010-055 Ø 6,5 mm x length 55 mm
001-0010-060 Ø 6,5 mm x length 60 mm
001-0010-065 Ø 6,5 mm x length 65 mm
001-0010-070 Ø 6,5 mm x length 70 mm
001-0010-075 Ø 6,5 mm x length 75 mm
001-0010-080 Ø 6,5 mm x length 80 mm
001-0010-085 Ø 6,5 mm x length 85 mm
001-0010-090 Ø 6,5 mm x length 90 mm
001-0010-095 Ø 6,5 mm x length 95 mm
001-0010-100 Ø 6,5 mm x length 100 mm
001-0010-105 Ø 6,5 mm x length 105 mm
001-0010-110 Ø 6,5 mm x length 110 mm
001-0010-115 Ø 6,5 mm x length 115 mm
001-0010-120 Ø 6,5 mm x length 120 mm
Product – Description:Stainless Steel Cancellous Screws Ø 6,5 mmwith partially Thread 16 mmImportant Technical Dimensions:Head Diameter Ø 8,0 mmHexalobe Socket width 3,5 mmShaft Diameter 4,5 mmCore Diameter for cancellous Thread Ø 3,0 mmThread Pitch 2,75 mmThread Length 16 mmApplicable Drill Bit for Thread Hole Ø 3,2 mmApplicable Drill Bit for Thread Hole, hard Bone Ø 4,5 mm Material: Stainless Steel
STAINLESS STEEL LARGE FRAGMENT DIA. 6,5 mm CANCELLOUS SCREW IMPLANTS WITH PARTIALLY THREAD 16 mm
14 | MAT Medical Advanced Technology
REF.-NO.: Diameter and complete Length
001-0011-040 Ø 6,5 mm x length 40 mm
001-0011-045 Ø 6,5 mm x length 45 mm
001-0011-050 Ø 6,5 mm x length 50 mm
001-0011-055 Ø 6,5 mm x length 55 mm
001-0011-060 Ø 6,5 mm x length 60 mm
001-0011-065 Ø 6,5 mm x length 65 mm
001-0011-070 Ø 6,5 mm x length 70 mm
001-0011-075 Ø 6,5 mm x length 75 mm
001-0011-080 Ø 6,5 mm x length 80 mm
001-0011-085 Ø 6,5 mm x length 85 mm
001-0011-090 Ø 6,5 mm x length 90 mm
001-0011-095 Ø 6,5 mm x length 95 mm
001-0011-100 Ø 6,5 mm x length 100 mm
001-0011-105 Ø 6,5 mm x length 105 mm
001-0011-110 Ø 6,5 mm x length 110 mm
001-0011-115 Ø 6,5 mm x length 115 mm
001-0011-120 Ø 6,5 mm x length 120 mm
Product – Description:Stainless Steel Cancellous Screws Ø 6,5 mmwith partially Thread 32 mmImportant Technical Dimensions:Head Diameter Ø 8,0 mmHexalobe Socket width 3,5 mmShaft Diameter 4,5 mmCore Diameter for cancellous Thread Ø 3,0 mmThread Pitch 2,75 mmThread Length 32 mmApplicable Drill Bit for Thread Hole Ø 3,2 mmApplicable Drill Bit for Thread Hole, hard Bone Ø 4,5 mm Material: Stainless Steel
STAINLESS STEEL LARGE FRAGMENT DIA. 6,5 mm CANCELLOUS SCREW IMPLANTS WITH PARTIALLY THREAD 32 mm
MAT Medical Advanced Technology | 15
REF.-NO.: Diameter and complete Length
001-0012-020 Ø 6,5 mm x length 20 mm
001-0012-025 Ø 6,5 mm x length 25 mm
001-0012-030 Ø 6,5 mm x length 30 mm
001-0012-035 Ø 6,5 mm x length 35 mm
001-0012-040 Ø 6,5 mm x length 40 mm
001-0012-045 Ø 6,5 mm x length 45 mm
001-0012-050 Ø 6,5 mm x length 50 mm
001-0012-055 Ø 6,5 mm x length 55 mm
001-0012-060 Ø 6,5 mm x length 60 mm
001-0012-065 Ø 6,5 mm x length 65 mm
001-0012-070 Ø 6,5 mm x length 70 mm
001-0012-075 Ø 6,5 mm x length 75 mm
001-0012-080 Ø 6,5 mm x length 80 mm
001-0012-085 Ø 6,5 mm x length 85 mm
001-0012-090 Ø 6,5 mm x length 90 mm
001-0012-095 Ø 6,5 mm x length 95 mm
001-0012-100 Ø 6,5 mm x length 100 mm
001-0012-105 Ø 6,5 mm x length 105 mm
001-0012-110 Ø 6,5 mm x length 110 mm
001-0012-115 Ø 6,5 mm x length 115 mm
001-0012-120 Ø 6,5 mm x length 120 mm
Product – Description:Stainless Steel Fullthreaded Cancellous Screw Ø 6,5 mm
Important Technical Dimensions:Head Diameter Ø 8,0 mmHexalobe Socket width 3,5 mmShaft Diameter 4,5 mmCore Diameter for cancellous Thread Ø 3,0 mmThread Pitch 2,75 mm
Applicable Drill Bit for Thread Hole Ø 3,2 mmApplicable Drill Bit for Thread Hole, hard Bone Ø 4,5 mm Material: Stainless Steel
Product – Description:Stainless Steel Washer Ø 13,0 mmused for Ø 4,5 mm / Ø 6,5 mm Screws
REF.-NO.:001-0013-004
STAINLESS STEEL LARGE FRAGMENT DIA. 6,5 mm FULLTHREADED CANCELLOUS SCREW IMPLANT
16 | MAT Medical Advanced Technology
SET-011-0010-051 LARGE FRAGMENT SCREW SET4,5 mm / 6,5 mm SYSTEM
REF.-NO.: PRODUCT-DESCRIPTION PCS.:
TRAY-011-0010-051 Tray for Large Fragment ScrewSET-011-0010-051 (Graphic Case)
-1-
REF.-NO.: DIA. 4,5 mm CORTICAL SCREW IMPLANTS
001-0008-014 Ø 4,5 mm x length 14 mm -6-
001-0008-016 Ø 4,5 mm x length 16 mm -6-
001-0008-018 Ø 4,5 mm x length 18 mm -6-
001-0008-020 Ø 4,5 mm x length 20 mm -6-
001-0008-022 Ø 4,5 mm x length 22 mm -6-
001-0008-024 Ø 4,5 mm x length 24 mm -6-
001-0008-026 Ø 4,5 mm x length 26 mm -7-
001-0008-028 Ø 4,5 mm x length 28 mm -7-
001-0008-030 Ø 4,5 mm x length 30 mm -14-
001-0008-032 Ø 4,5 mm x length 32 mm -14-
001-0008-034 Ø 4,5 mm x length 34 mm -14-
001-0008-036 Ø 4,5 mm x length 36 mm -14-
001-0008-038 Ø 4,5 mm x length 38 mm -7-
001-0008-040 Ø 4,5 mm x length 40 mm -14-
001-0008-042 Ø 4,5 mm x length 42 mm -6-
001-0008-044 Ø 4,5 mm x length 44 mm -6-
001-0008-046 Ø 4,5 mm x length 46 mm -6-
001-0008-048 Ø 4,5 mm x length 48 mm -3-
001-0008-052 Ø 4,5 mm x length 52 mm -3-
001-0008-056 Ø 4,5 mm x length 56 mm -3-
001-0008-060 Ø 4,5 mm x length 60 mm -3-
001-0008-065 Ø 4,5 mm x length 65 mm -3-
001-0008-070 Ø 4,5 mm x length 70 mm -3-
Tray-011-0010-051 Tray Large Fragment ScrewSET-011-0010-051 (Graphic Case Stainless Steel)
INDEX: SET-011-0010-051 LARGE FRAGMENT SCREW SET-LISTING - CONTENT:SCREWS / WASHER / SCREW FORCEPS
LISTING-CONTENT:Catalogue page 16 up to 18
MAT Medical Advanced Technology | 17
REF.-NO.: PRODUCT-DESCRIPTIONDIA. 4,5 mm MALLEOLAR SCREW IMPLANT
PCS.:
001-0009-025 Ø 4,5 mm x length 25 mm -3-
001-0009-030 Ø 4,5 mm x length 30 mm -3-
001-0009-035 Ø 4,5 mm x length 35 mm -3-
001-0009-040 Ø 4,5 mm x length 40 mm -3-
001-0009-045 Ø 4,5 mm x length 45 mm -3-
001-0009-050 Ø 4,5 mm x length 50 mm -3-
001-0009-055 Ø 4,5 mm x length 55 mm -3-
001-0009-060 Ø 4,5 mm x length 60 mm -3-
001-0009-065 Ø 4,5 mm x length 65 mm -3-
001-0009-070 Ø 4,5 mm x length 70 mm -3-
REF.-NO.: PRODUCT-DESCRIPTIONDIA. 6,5 mm CANCELLOUS SCREW IMPLANTWITH PARTIALLY THREAD 16 mm
PCS.:
001-0010-030 Ø 6,5 mm x length 30 mm -2-
001-0010-035 Ø 6,5 mm x length 35 mm -2-
001-0010-040 Ø 6,5 mm x length 40 mm -2-
001-0010-045 Ø 6,5 mm x length 45 mm -2-
001-0010-050 Ø 6,5 mm x length 50 mm -2-
001-0010-055 Ø 6,5 mm x length 55 mm -2-
001-0010-060 Ø 6,5 mm x length 60 mm -2-
001-0010-065 Ø 6,5 mm x length 65 mm -2-
001-0010-070 Ø 6,5 mm x length 70 mm -2-
001-0010-075 Ø 6,5 mm x length 75 mm -2-
001-0010-080 Ø 6,5 mm x length 80 mm -2-
001-0010-085 Ø 6,5 mm x length 85 mm -2-
001-0010-090 Ø 6,5 mm x length 90 mm -2-
001-0010-095 Ø 6,5 mm x length 95 mm -2-
001-0010-100 Ø 6,5 mm x length 100 mm -2-
001-0010-105 Ø 6,5 mm x length 105 mm -2-
001-0010-110 Ø 6,5 mm x length 110 mm -2-
Tray-011-0010-051 Tray Large Fragment ScrewSET-011-0010-051 (Graphic Case Stainless Steel)
INDEX: SET-011-0010-051 LARGE FRAGMENT SCREW SET-LISTING - CONTENT:SCREWS / WASHER / SCREW FORCEPS
LISTING-CONTENT:Catalogue page 16 up to 18
18 | MAT Medical Advanced Technology
REF.-NO.: PRODUCT-DESCRIPTIONDIA. 6,5 mm CANCELLOUS SCREW IMPLANTS WITH PARTIALLY THREAD 32 mm
PCS.:
001-0011-045 Ø 6,5 mm x length 45 mm -3-
001-0011-050 Ø 6,5 mm x length 50 mm -3-
001-0011-055 Ø 6,5 mm x length 55 mm -3-
001-0011-060 Ø 6,5 mm x length 60 mm -3-
001-0011-065 Ø 6,5 mm x length 65 mm -3-
001-0011-070 Ø 6,5 mm x length 70 mm -3-
001-0011-075 Ø 6,5 mm x length 75 mm -3-
001-0011-080 Ø 6,5 mm x length 80 mm -3-
001-0011-085 Ø 6,5 mm x length 85 mm -3-
001-0011-090 Ø 6,5 mm x length 90 mm -3-
001-0011-095 Ø 6,5 mm x length 95 mm -3-
001-0011-100 Ø 6,5 mm x length 100 mm -3-
001-0011-105 Ø 6,5 mm x length 105 mm -3-
001-0011-110 Ø 6,5 mm x length 110 mm -3-
REF.-NO.: PRODUCT-DESCRIPTIONDIA. 6,5 mm FULLTHREADED CANCELLOUS SCREW IMPLANT
PCS.:
001-0012-025 Ø 6,5 mm x length 25 mm -4-
001-0012-030 Ø 6,5 mm x length 30 mm -4-
001-0012-035 Ø 6,5 mm x length 35 mm -4-
001-0012-040 Ø 6,5 mm x length 40 mm -4-
001-0012-045 Ø 6,5 mm x length 45 mm -2-
001-0012-050 Ø 6,5 mm x length 50 mm -2-
001-0012-055 Ø 6,5 mm x length 55 mm -2-
001-0012-060 Ø 6,5 mm x length 60 mm -2-
001-0012-065 Ø 6,5 mm x length 65 mm -2-
001-0012-070 Ø 6,5 mm x length 70 mm -2-
001-0012-075 Ø 6,5 mm x length 75 mm -2-
001-0012-080 Ø 6,5 mm x length 80 mm -2-
001-0012-085 Ø 6,5 mm x length 85 mm -2-
001-0012-090 Ø 6,5 mm x length 90 mm -2-
001-0012-095 Ø 6,5 mm x length 95 mm -2-
001-0012-100 Ø 6,5 mm x length 100 mm -2-
001-0012-105 Ø 6,5 mm x length 105 mm -2-
001-0012-110 Ø 6,5 mm x length 110 mm -2-
REF.-NO.: PRODUCT-DESCRIPTION PCS.:
001-0013-004 Washer Ø 13,0 mm used for Ø 4,5 mm / Ø 6,5 mm Screws
-6-
005-0219-097 Screw forceps -1-
Tray-011-0010-051 Tray Large Fragment ScrewSET-011-0010-051 (Graphic Case Stainless Steel)
INDEX: SET-011-0010-051 LARGE FRAGMENT SCREW SET-LISTING - CONTENT:SCREWS / WASHER / SCREW FORCEPS
LISTING-CONTENT:Catalogue page 16 up to 18
SET-011-0010-051 LARGE FRAGMENT SCREW SET4,5 mm / 6,5 mm SYSTEM
MAT Medical Advanced Technology | 19
RECOMMEND STERILIZATION CONTAINER FOR SET-011-0010-024
REF.-NO.: STERILIZATION CONTAINER
C-310-200 1/2 Size container, bottom non perforated outside 285 x 280 x 200 mm / inside 262 x 260 x 182 mm
SET-011-0010-051 LARGE FRAGMENT SCREW SETRECOMMENED STERILIZATION CONTAINER FOR
4,5 mm / 6,5 mm SYSTEM
20 | MAT Medical Advanced Technology
STAINLESS STEEL LARGE FRAGMENT Semi Tubular Plates Ø 4,5 mm
STAINLESS STEEL LARGE FRAGMENT Narrow Compression Plates Ø 4,5 mm / 6,5 mm
Product - Description:Semi Tubular Plates Ø 4,5 mm used with Ø 4,5 mm Cortical ScrewsApplicable for Fixation of Forearm Fractures, occasionally be used as a tension Band Plates in open Book Injuries of the Pelvis and as a second Plates in comminuted Fractures in the Metaphysis of long Bones.
Product - Description:Narrow Plates Ø 4,5 mm used with Ø 4,5 mm Cortical - and Ø 6,5 mm Cancellous ScrewsApplicable for Fixation of Tibia Shaft Fractures, occasionally be used on the Radius or Ulna in a Large Patient
REF.-NO.: Complete Length and Holes
PL-1019-02 Length 139 mm x Hole 2
PL-1019-03 Length 155 mm x Hole 3
PL-1019-04 Length 171 mm x Hole 4
PL-1019-05 Length 187 mm x Hole 5
PL-1019-06 Length 103 mm x Hole 6
PL-1019-07 Length 119 mm x Hole 7
REF.-NO.: Complete Length and Holes
PL-1013-02 Length 139 mm x Hole 2
PL-1013-03 Length 155 mm x Hole 3
PL-1013-04 Length 171 mm x Hole 4
PL-1013-05 Length 187 mm x Hole 5
PL-1013-06 Length 103 mm x Hole 6
PL-1013-07 Length 119 mm x Hole 7
PL-1013-08 Length 135 mm x Hole 8
REF.-NO.: Complete Length and Holes
PL-1019-08 Length 135 mm x Hole 08
PL-1019-09 Length 151 mm x Hole 09
PL-1019-10 Length 167 mm x Hole 10
PL-1019-11 Length 183 mm x Hole 11
PL-1019-12 Length 199 mm x Hole 12
REF.-NO.: Complete Length and Holes
PL-1013-09 Length 151 mm x Hole 09
PL-1013-10 Length 167 mm x Hole 10
PL-1013-11 Length 183 mm x Hole 11
PL-1013-12 Length 199 mm x Hole 12
PL-1013-14 Length 231 mm x Hole 14
PL-1013-16 Length 263 mm x Hole 16
PL-1013-18 Length 295 mm x Hole 18
Important technical Dimensions:Thickness 1,0 mmBroad / Shaft 12,0 mmDistance Hole / Shaft 16,0 mm (middle spacing 25,0 mm)Material: Stainless Steel
Product - Description:Stainless Steel Semi Tubular Plates Ø 4,5 mm
Important technical Dimensions:Thickness 4,0 mmBroad / Shaft 12,0 mmDistance Hole / Shaft 16,0 mm (middle spacing 25,0 mm)Material: Stainless Steel
Product - Description:Narrow Compression Plates Ø 4,5 mm / Ø 6,5 mm
MAT Medical Advanced Technology | 21
LARGE FRAGMENT IMPLANTS
STAINLESS STEEL LARGE FRAGMENT MC-Narrow Compression Plates Ø 4,5 mm
STAINLESS STEEL LARGE FRAGMENT Broad Compression Plates Ø 4,5 mm / Ø 6,5 mm
Product - Description:MC-Narrow Plates Ø 4,5 mm used with Ø 4,5 mm Cortical ScrewApplicable for Fixation of Tibia Shaft Fractures, occasionally be used on the Radius or Ulna in a Large Patient
Product - Description:(MC) Minimal Content Narrow Compression Plates Ø 4,5 mm / Ø 6,5 mm
Product - Description:Broad Plates Ø 4,5 mm used with Ø 4,5 mm Cortical - and Ø 6,5 mm Cancellous ScrewApplicable for Fixation of diaphysis Fractures of Femur and Humerus
Product - Description:Broad Compression Plates Ø 4,5 mm / Ø 6,5 mm
REF.-NO.: Complete Length and Holes
PL-1007-02 Length 139 mm x Hole 2
PL-1007-03 Length 155 mm x Hole 3
PL-1007-04 Length 171 mm x Hole 4
PL-1007-05 Length 187 mm x Hole 5
PL-1007-06 Length 103 mm x Hole 6
PL-1007-07 Length 119 mm x Hole 7
PL-1007-08 Length 135 mm x Hole 8
REF.-NO.: Complete Length and Holes
PL-1011-02 Length 139 mm x Hole 02
PL-1011-03 Length 155 mm x Hole 0 3
PL-1011-04 Length 171 mm x Hole 0 4
PL-1011-05 Length 187 mm x Hole 05
PL-1011-06 Length 103 mm x Hole 6
PL-1011-07 Length 119 mm x Hole 07
PL-1011-08 Length 135 mm x Hole 08
PL-1011-09 Length 151 mm x Hole 0 9
PL-1011-10 Length 167 mm x Hole 10
REF.-NO.: Complete Length and Holes
PL-1007-09 Length 151 mm x Hole 09
PL-1007-10 Length 167 mm x Hole 10
PL-1007-11 Length 183 mm x Hole 11
PL-1007-12 Length 199 mm x Hole 12
PL-1007-14 Length 231 mm x Hole 14
PL-1007-16 Length 263 mm x Hole 16
REF.-NO.: Complete Length and Holes
PL-1011-11 Length 183 mm x Hole 11
PL-1011-12 Length 199 mm x Hole 12
PL-1011-13 Length 215 mm x Hole 13
PL-1011-14 Length 231 mm x Hole 14
PL-1011-15 Length 247 mm x Hole 15
PL-1011-16 Length 263 mm x Hole 16
PL-1011-17 Length 279 mm x Hole 17
PL-1011-18 Length 295 mm x Hole 18
Important technical Dimensions:Thickness 4,0 mmBroad / Shaft 12,0 mmDistance Hole / Shaft 16,0 mm (middle spacing 25,0 mm)Material: Stainless Steel
Important technical Dimensions:Thickness 5,0 mmBroad / Shaft 16,2 mmDistance Hole / Shaft 16,0 mm (middle spacing 25,0 mm)Material: Stainless Steel
22 | MAT Medical Advanced Technology
STAINLESS STEEL LARGE FRAGMENT MC-Board CompressionPlates Ø 4,5 mm
STAINLESS STEEL LARGE FRAGMENT Spoon Plates Ø 4,5 mm / 6,5 mm
Product - Description:MC-Board Plates Ø 4,5 mm used with Ø 4,5 mm Cortical ScrewsApplicable for Fixation of Femur Fractures and for pseudarthroses of the Humerus
Product - Description:(MC) Minimal Contact Broad Compression Plates Ø 4,5 mm
Product - Description:Spoon Plates Ø 4,5 mm used with Ø 4,5 mm Cortical - and Ø 6,5 mm Cancellous ScrewsApplicable for Fixation of distal Tibia Joint Fractures
REF.-NO.: Complete Length and Holes
PL-1006-06 Length 103 mm x Hole 6
PL-1006-07 Length 119 mm x Hole 7
PL-1006-08 Length 135 mm x Hole 8
PL-1006-09 Length 151 mm x Hole 9
PL-1006-10 Length 167 mm x Hole 10
PL-1006-11 Length 183 mm x Hole 11
PL-1006-12 Length 199 mm x Hole 12
REF.-NO.: Complete Length and Holes
PL-1034-05 Length 100 mm x Hole 5
REF.-NO.: Complete Length and Holes
PL-1006-13 Length 215 mm x Hole 13
PL-1006-14 Length 231 mm x Hole 14
PL-1006-15 Length 247 mm x Hole 15
PL-1006-16 Length 263 mm x Hole 16
PL-1006-17 Length 279 mm x Hole 17
PL-1006-18 Length 295 mm x Hole 18
REF.-NO.: Complete Length and Holes
PL-1034-06 Length 120 mm x Hole 6
Important technical Dimensions:Thickness 5,0 mmBroad / Shaft 16,2 mmDistance Hole / Shaft 16,0 mm (middle spacing 25,0 mm)Material: Stainless Steel
Important technical Dimensions:Thickness 2,0 mmHead Width 34,0 mmMaterial: Stainless Steel
Product - Description:Spoon Plates Ø 4,5 mm / Ø 6,5 mm
MAT Medical Advanced Technology | 23
REF.-NO.: Diameter and complete Length
PL-1035-03 Length 068 mm x Hole 03
PL-1035-04 Length 084 mm x Hole 04
PL-1035-05 Length 100 mm x Hole 05
PL-1035-06 Length 116 mm x Hole 06
PL-1035-07 Length 134 mm x Hole 07
PL-1035-08 Length 148 mm x Hole 08
PL-1035-09 Length 164 mm x Hole 09
PL-1035-10 Length 180 mm x Hole 10
PL-1035-12 Length 212 mm x Hole 12
REF.-NO.: Diameter and complete Length
PL-1036-04 Length 084 mm x Hole 04
PL-1036-05 Length 100 mm x Hole 05
PL-1036-06 Length 116 mm x Hole 06
PL-1036-08 Length 148 mm x Hole 08
STAINLESS STEEL LARGE FRAGMENT T-Plates Ø 4,5 mm / 6,5 mm
STAINLESS STEEL LARGE FRAGMENT T-Buttress Ø 4,5 mm / 6,5 mm
Product - Description:T-Plates Ø 4,5 mm used with Ø 4,5 mm Cortical Screws - and Ø 6,5 mm Cancellous ScrewsApplicable for Fixation of Tibia Plateau Fractures, medical Aspect also applied in proximal Humeral Fractures
Important technical Dimensions:Thickness 2,0 mmBroad / Shaft 17,0 mmHead Width 33,0 mmDistance Hole / Shaft 16,0 mmMaterial: Stainless Steel
Product - Description:T-Plates Ø 4,5 mm / Ø 6,5 mm
Product - Description:T-Buttress Plates Ø 4,5 mm used with Ø 4,5 mm Cortical - and Ø 6,5 mm Cancellous ScrewsApplicable for Fixation of Tibia Plateau Fractures, lateral Aspect
Important technical Dimensions:Thickness 2,0 mmBroad / Shaft 17,0 mmHead Width 33,0 mmDistance Hole / Shaft 16,0 mmMaterial: Stainless Steel
Product - Description:T-Buttress Plates Ø 4,5 mm / Ø 6,5 mm
LARGE FRAGMENT IMPLANTS
24 | MAT Medical Advanced Technology
REF.-NO.: Complete Length and Holes
RIGHT PLATES
PL-1038-04R Length 087 mm x Hole 04 RIGHT
PL-1038-06R Length 119 mm x Hole 06 RIGHT
PL-1038-08R Length 151 mm x Hole 08 RIGHT
PL-1038-10R Length 183 mm x Hole 10 RIGHT
LEFT PLATES
PL-1038-04L Length 087 mm x Hole 04 LEFT
PL-1038-06L Length 119 mm x Hole06 LEFT
PL-1038-08L Length 151 mm x Hole 08 LEFT
PL-1038-10L Length 183 mm x Hole 10 LEFT
REF.-NO.: Complete Length and Holes
RIGHT PLATES
PL-1058-05R Length 118 mm x Hole 05 RIGHT
PL-1058-07R Length 150 mm x Hole 07 RIGHT
PL-1058-09R Length 182 mm x Hole 09 RIGHT
PL-1058-11R Length 214 mm x Hole 11 RIGHT
PL-1058-13R Length 246 mm x Hole 13 RIGHT
LEFT PLATES
PL-1058-05L Length 118 mm x Hole 05 LEFT
PL-1058-07L Length 150 mm x Hole 07 LEFT
PL-1058-09L Length 182 mm x Hole 09 LEFT
PL-1058-11L Length 214 mm x Hole 11 LEFT
PL-1058-13L Length 246 mm x Hole 13 LEFT
STAINLESS STEEL LARGE FRAGMENT L-Buttress Plates Ø 4,5 mm / 6,5 mm
STAINLESS STEEL LARGE FRAGMENT Lateral Tibia Head Buttress Ø 4,5 mm / 6,5 mm
Product - Description:L-Buttress Plates Ø 4,5 mm used with Ø 4,5 mm Cortical - and Ø 6,5 mm Cancellous ScrewsApplicable for Fixation of Tibia Plateau Fractures, lateral Aspect
Important technical Dimensions:Thickness 2,0 mmBroad / Shaft 16,0 mmDistance Hole / Shaft 16,0 mmMaterial: Stainless Steel
Product - Description:L-Buttress Plates Ø 4,5 mm / Ø 6,5 mm
Product - Description:Lateral Tibia Head Buttress Plates Ø 4,5 mm used with Ø 4,5 mm Cortical - and Ø 6,5 mm Cancellous ScrewsApplicable for Fixation of lateral Tibia Plateau Fractures
Important technical Dimensions:Thickness 4,0 mmBroad / Shaft 14,0 mmDistance Hole / Shaft 16,0 mmMaterial: Stainless Steel
Product - Description:Lateral Tibia Head Buttress Plates Ø 4,5 mm / Ø 6,5 mm
MAT Medical Advanced Technology | 25
REF.-NO.: Complete Length and Holes
RIGHT PLATES
PL-1061-05R Length 080 mm x Hole 05 RIGHT
PL-1061-07R Length 122 mm x Hole 07 RIGHT
PL-1061-09R Length 158 mm x Hole 09 RIGHT
PL-1061-11R Length 194 mm x Hole 11 RIGHT
PL-1061-13R Length 230 mm x Hole 13 RIGHT
LEFT PLATES
PL-1061-05L Length 080 mm x Hole 05 LEFT
PL-1061-07L Length 122 mm x Hole 07 LEFT
PL-1061-09L Length 158 mm x Hole 09 LEFT
PL-1061-11L Length 194 mm x Hole 11 LEFT
PL-1061-13L Length 230 mm x Hole 13 LEFT
REF.-NO.: Complete Length and Holes
RIGHT PLATES
PL-1062-05R Length 80 mm x Hole 05 RIGHT
PL-1062-07R Length 122 mm x Hole 07 RIGHT
PL-1062-09R Length 158 mm x Hole 09 RIGHT
PL-1062-11R Length 194 mm x Hole 11 RIGHT
PL-1062-13R Length 230 mm x Hole 13 RIGHT
LEFT PLATES
PL-1062-05L Length 80 mm x Hole 05 LEFT
PL-1062-07L Length 122 mm x Hole 07 LEFT
PL-1062-09L Length 158 mm x Hole 09 LEFT
PL-1062-11L Length 194 mm x Hole 11 LEFT
PL-1062-13L Length 230 mm x Hole 13 LEFT
STAINLESS STEEL LARGE FRAGMENT Proximal Tibia Plates, Lateral Ø 4,5 mm / 6,5 mm
STAINLESS STEEL LARGE FRAGMENT Distal Tibia Plates, Medial Ø 4,5 mm / 6,5 mm
Product - Description:Proximal Tibia Plates, lateral Ø 4,5 mm used with Ø 4,5 mm Cortical - and Ø 6,5 mm Cancellous ScrewsApplicable for Fixation of lateral Tibia Plateau Fractures
Important technical Dimensions:Thickness 3,2 mmBroad / Shaft 16,0 mmHead Width 24,0 mmDistance Hole / Shaft 16,0 mmMaterial: Stainless Steel
Product - Description:Proximal Tibia Plates, lateral Ø 4,5 mm / Ø 6,5 mm
Product - Description:Distal Tibia Plates, medial Ø 4,5 mm used with Ø 4,5 mm Cortical - and Ø 6,5 mm Cancellous ScrewsApplicable for Fixation of distal Tibia Fractures
Important technical Dimensions:Thickness 3,2 mmBroad / Shaft 16,0 mmHead Width 24,0 mmDistance Hole / Shaft 18,0 mmMaterial: Stainless Steel
Product - Description:Distal Tibia Plates, medial Ø 4,5 mm / Ø 6,5 mm
26 | MAT Medical Advanced Technology
REF.-NO.: Complete Length and Holes
RIGHT PLATES
PL-1056-07R Length 158 mm x Hole 07 RIGHT
PL-1056-09R Length 190 mm x Hole 9 RIGHT
PL-1056-11R Length 222 mm x Hole 11 RIGHT
PL-1056-13R Length 254 mm x Hole 13 RIGHT
PL-1056-15R Length 286 mm x Hole 15 RIGHT
LEFT PLATES
PL-1056-07L Length 158 mm x Hole 07 LEFT
PL-1056-09L Length 190 mm x Hole 9 LEFT
PL-1056-11L Length 254 mm x Hole 13 LEFT
PL-1056-13L Length 183 mm x Hole 10 LEFT
PL-1056-15L Length 286 mm x Hole 15 LEFT
REF.-NO.: Complete Length and Holes
PL-1054-08 Length 170 mm x Hole 08
PL-1054-09 Length 186 mm x Hole 09
PL-1054-10 Length 202 mm x Hole 10
PL-1054-11 Length 218 mm x Hole 11
STAINLESS STEEL LARGE FRAGMENT Femur Condylar Buttress Plates Ø 4,5 mm / 6,5 mm
STAINLESS STEEL LARGE FRAGMENT Femur Cobra Head Plates Ø 4,5 mm
Product - Description:Femur Condylar Buttress Plates Ø 4,5 mm used with Ø 4,5 mm Cortical - and Ø 6,5 mm Cancellous ScrewsApplicable for Fixation of comminuted Fractures in the distal Femur
Important technical Dimensions:Thickness 5,0 mmBroad / Shaft 14,0 mmDistance Hole / Shaft 16,0 mmMaterial: Stainless Steel
Product - Description:Femur Condylar Buttress Plates Ø 4,5 mm / Ø 6,5 mm
Product - Description:Femur Cobra Head Plates Ø 4,5 mm used with Ø 4,5 mm Cortical ScrewsApplicable for Fixation of Hip Arthodesis
Important technical Dimensions:Thickness 5,0 mmBroad / Shaft 16,0 mmDistance Hole / Shaft 16,0 mmMaterial: Stainless Steel
Product - Description:Femur Cobra Head Plates Ø 4,5 mm
MAT Medical Advanced Technology | 27
STAINLESS STEEL LARGE FRAGMENT Narrow Lengthening 8 Hole Plates Ø 4,5 mm / 6,5 mm
STAINLESS STEEL LARGE FRAGMENT Broad Lengthening 8 Hole Plates Ø 4,5 mm / Ø 6,5 mm
Product - Description:Narrow Lengthening 8 Hole Plates Ø 4,5 mm used with Ø 4,5 mm Cortical and Ø 6,5 mm Cancellous ScrewsApplicable for used lengthening Procedures with the lengthening Apparatus Plates
Important technical Dimensions:Thickness 4,0 mmBroad / Shaft 12,0 mmDistance Hole / Shaft 12,0 mmMaterial: Stainless Steel
Product - Description:Narrow Lengthening 8 Hole Plates Ø 4,5 mm / Ø 6,5 mm
Product - Description:Broad Lengthening 8 Hole Plates Ø 4,5 mm used with Ø 4,5 mm Cortical and Ø 6,5 mm Cancellous ScrewsApplicable for used lengthening Procedures Femur with the lengthening Apparatus Plates
Important technical Dimensions:Thickness 5,0 mmBroad / Shaft 16,0 mmDistance Hole / Shaft 12,0 mmMaterial: Stainless Steel
Product - Description:Broad Lengthening 8 Hole Plates Ø 4,5 mm / Ø 6,5 mm
REF.-NO.: Complete Length and Holes Lengthening mm
PL-1010-308 Length 125 mm x Hole 8 30 mm
PL-1010-408 Length 135 mm x Hole 8 40 mm
PL-1010-508 Length 145 mm x Hole 8 50 mm
PL-1010-608 Length 155 mm x Hole 8 60 mm
PL-1010-708 Length 165 mm x Hole 8 70 mm
PL-1010-808 Length 175 mm x Hole 8 80 mm
REF.-NO.: Complete Length and Holes Lengthening mm
PL-1009-308 Length 125 mm x Hole 8 30 mm
PL-1009-408 Length 135 mm x Hole 8 40 mm
PL-1009-508 Length 145 mm x Hole 8 50 mm
PL-1009-608 Length 155 mm x Hole 8 60 mm
PL-1009-708 Length 165 mm x Hole 8 70 mm
28 | MAT Medical Advanced Technology
STAINLESS STEEL LARGE FRAGMENT Broad Lengthening 10 Hole Plates Ø 4,5 mm / Ø 6,5 mm
Product - Description:Broad Lengthening 10 Hole Plates Ø 4,5 mm used with Ø 4,5 mm Cortical and Ø 6,5 mm Cancellous ScrewsApplicable for used lengthening Procedures Femur with the lengthening Apparatus Plates
Important technical Dimensions:Thickness 5,0 mmBroad / Shaft 16,0 mmDistance Hole / Shaft 12,0 mmMaterial: Stainless Steel
Product - Description:Broad Lengthening 10 Hole Plates Ø 4,5 mm / Ø 6,5 mm
REF.-NO.: Complete Length and Holes Lengthening mm
PL-1009-5010 Length 180 mm x Hole 10 50 mm
PL-1009-6010 Length 190 mm x Hole 10 60 mm
PL-1009-7010 Length 200 mm x Hole 10 70 mm
PL-1009-8010 Length 210 mm x Hole 10 80 mm
PL-1009-9010 Length 220 mm x Hole 10 90 mm
PL-1009-1010 Length 230 mm x Hole 10 100 mm
PL-1009-1110 Length 240 mm x Hole 10 110 mm
PL-1009-1210 Length 250 mm x Hole 10 120 mm
MAT Medical Advanced Technology | 29
SET-011-0010-052REF.-NO.: PRODUCT - DESCRIPTION PCS.:
TRAY-011-0010-052 Tray for Large Fragment Plate Set SET-011-0010-052 (Graphic Case)
-1-
STAINLESS STEEL LARGE FRAGMENT
REF.-NO.: SEMI TUBULAR PLATES Ø 4,5 mm PCS.:
PL-1019-04 Length 71 mm x Hole 4 -2-
PL-1019-05 Length 87 mm x Hole 5 -2-
PL-1019-06 Length 103 mm x Hole 6 -2-
PL-1019-07 Length 119 mm x Hole 7 -1-
REF.-NO.: NARROW COMPRESSION PLATES Ø 4,5 mm / Ø 6,5 mm
PCS.:
PL-1013-04 Length 71 mm x Hole 4 -2-
PL-1013-05 Length 87 mm x Hole 5 -2-
PL-1013-06 Length 103 mm x Hole 6 -4-
PL-1013-07 Length 119 mm x Hole 7 -2-
PL-1013-08 Length 135 mm x Hole 8 -2-
PL-1013-09 Length 151 mm x Hole 9 -2-
PL-1013-10 Length 167 mm x Hole 10 -1-
PL-1013-12 Length 199 mm x Hole 12 -1-
REF.-NO.: BROAD COMPRESSION PLATES Ø 4,5 mm / Ø 6,5 mm
PCS.:
PL-1011-06 Length 103 mm x Hole 6 -2-
PL-1011-07 Length 119 mm x Hole 7 -2-
PL-1011-08 Length 135 mm x Hole 8 -2-
PL-1011-09 Length 151 mm x Hole 9 -1-
PL-1011-10 Length 167 mm x Hole 10 -1-
PL-1011-12 Length 199 mm x Hole 12 -1-
PL-1011-14 Length 231 mm x Hole 14 -1-
REF.-NO.: SPOON PLATES Ø 4,5 mm / Ø 6,5 mm PCS.:
PL-1034-05 Length 100 mm x Hole 5 -1-
PL-1034-06 Length 120 mm x Hole 6 -1-
REF.-NO.: T - PLATES Ø 4,5 mm / Ø 6,5 mm PCS.:
PL-1035-04 Length 84 mm x Hole 4 -1-
PL-1035-06 Length 116 mm x Hole 6 -1-
PL-1035-08 Length 148 mm x Hole 8 -1-
REF.-NO.: T - BUTTRESS PLATES Ø 4,5 mm / Ø 6,5 mm PCS.:
PL-1036-04 Length 84 mm x Hole 4 -1-
REF.-NO.: L - BUTTRESS PLATES Ø 4,5 mm / Ø 6,5 mm PCS.:
PL-1038-04L Length 87 mm x Hole 4 LEFT
PL-1038-04R Length 87 mm x Hole 4 RIGHT
TRAY-011-0010-052 Tray for Large Fragment PlateSET-011-0010-052 (Graphic Case Stainless Steel)
INDEX: SET-011-0010-052LARGE FRAGMENT PLATE SET-LISTING - CONTENT:NARROW AND BROAD PLATES
LISTING-CONTENT:Catalogue page 29
LARGE FRAGMENT PLATE SET4,5 mm / 6,5 mm System
CONTENT NARROWAND BROAD PLATES
30 | MAT Medical Advanced Technology
SET-011-0010-052 LARGE FRAGMENT PLATE SETRECOMMENDED STERILIZATION CONTAINER FOR
4,5 mm / 6,5 mm SYSTEM
RECOMMENDED STERILIZATION CONTAINER FOR SET-011-0010-052
REF.-NO.: STERILIZATION CONTAINER
C-110-135 1/1 Size container, bottom non perforated outside 580 x 280 x 135 mm / inside 550 x 265 x 115 mm
MAT Medical Advanced Technology | 31
NOTICE
Large Fragment Instruments © MAT / AtelierUrban
MEDICAL ADVANCED TECHNOLOGY
MAT GmbH & Co.KGFriedrich-Wöhler Straße 1078576 Emmingen-Liptingen, GermanyPhone: +49 (0)7465 909 188 ∙ Fax : +49 (0)7465 909 024 www.mat-medical.com ∙ [email protected]
Revision 19.11.2014