-
Fob Draft System
Visit us at www.beerequipment.com
-
About UsPacific Beer Equipment’s renowned high-tech DraughtFoam
Control device (Beer FOBs), the DFC 9500, stopsbeer flow
immediately after a keg empties, both at thekey and the tap. This
eliminates the spitting andspraying that usually happens when a keg
“blows”. TheDFC 9500 keeps the supply lines full of beer, even
whena keg blows, resulting in instant beer from a freshlytapped
keg.That's right — no more time and money is wastedpouring off foam
in order to get to the good stuff.Savings for businesses are
astronomical. Independenttesting by various North American
Breweries has shownthe DFC 9500 saves an average of one pitcher of
beerper keg on a typical long-draw run, much greatersavings for
stadiums, airports, and hotels. Given thatthere are approximately
40 pitchers in a keg and basedon a volume of 40 kegs per week -
bars, pubs, clubs andrestaurants would save one keg a week. That's
52 kegs ayear!Owners see their return on investment very
quickly.
-
ProductThe DFC9500 stops beer flow instantly when a kegempties,
keeping the supply line full of beer. Beer isno longer wasted as
foam when a new keg istapped. Save an average of one pitcher of
draughtper keg. Much greater savings is seen atinstallations with
longer than average supply lineslike Stadiums, Airports, and
Hotels.Reduces the amount of CO2 or Beer Gas usedbecause it no
longer fills the supply line andescapes out of the tap.Ideal for
installations with computer portioncontrol, and flow metering
systems, which can loseCalibration and give inaccurate total
volumereadings when gas passes through them.Bartenders require less
time to change kegsbecause the supply lines do not need to be
clearedof gas and foam to get to "clear" beer. Servers donot have
to wait to have their orders filled.
-
Instructions for use:
Disconnect the keg coupler from the empty kegand connect to a
full keg in the usual manner.Follow the following operating
instructions toinstall the DFC 9500.Push vent button. Wait a few
seconds for foamto settle and vent again, ensuring the chamberis
generally full of beer.Twist Up Twist the knob
counterclockwiseuntil it stops! Float will rise to top of
chamber..Lock Down Twist the knob clockwise fully untilit stops.
That’s it! You are now ready to pourbeer.Cleaning (Authorized
Personnel Only) Whenflushing lines, twist knob
counterclockwise,until it stops in the twist up position
(#2).Operate the vent button a few times while flushcleaning to
ensure the vent will not “stick” in anopen position during regular
use.
-
How does it works?
Pacific Beer Equipment’s renowned high-tech DraughtFoam Control
device (Beer FOBs), the DFC 9500, stopsbeer flow immediately after
a keg empties, both at thekey and the tap. This eliminates the
spitting andspraying that usually happens when a keg “blows”And
because the DFC 9500 keeps the supply lines fullof beer, even when
a keg blows, you get instant beerfrom a freshly tapped keg. That’s
right – no more timeand money is wasted pouring off foam in order
to getto the good stuff. Savings for businesses areastronomical.
Independent testing by various NorthAmerican Breweries has shown
the DFC 9500 saves anaverage of one pitcher of beer per keg on a
typicallong-draw run, even greater savings for stadiums,airports,
and hotels. Given that there areapproximately 40 pitchers in a keg
and based on avolume of 40 kegs per week – bars, pubs, clubs
andrestaurants would save one keg a week. That’s 52 kegsa year!
Owners see the return on their investment veryquickly. The DFC9500
is available as a wall mount unit,using Pacific Beer Equipment’s
own wall mount bracketor keg mounted.
-
Trouble ShootingGAS/FOAM ESCAPING FROM TAP WHEN KEGEMPTIES.
UNIT SHUTS DOWN WHEN THERE IS STILLBEER IN THE KEG
OTHER
Check knob is in position #3 Lock-Down
Follow procedures 1,2 and 3 – Vent, Twist Up, LockDown, If unit
continues to shut down, CO2breakout may be occurring (gas is
escaping fromthe beer and collecting in the clear chamber).
Thisusually indicates a “leaky” internal CO2 seal in thekeg
coupler. Replacing or servicing the keg couplerwill correct the
problem. Until servicing the couplerbypass the DFC 9500 as
indicated in Step 3 below.
To bypass unit due to unexplainable trouble: Twistup in position
#2 – you can now continue to servebeer in the usual manner. Call
your productsalesperson or local draught service person
duringregular hours for complete service.
-
Contact Us
1.888.225.2256
[email protected]
www.beerequipment.com
822A Second Floor, 12th Street,New Westminster, B.C. V3M 4K3
Canada
tel:18882252256https://www.beerequipment.com/product/
