OWNER’SMANUAL

Date of purchase: _____/ _____/ _____

Replacement Canopy for Clayton gazebo

Product code: D71 M80930UPC code: 7-6945575811-8

1

Vendor Item: C-I-138-2NGZ

PARTSRead through all the instructions before beginning assembly. Unpack and identify all the parts. Place them on a flat, non-abrasive surface. Assembly by two people is recommended.

A (1) Orignal Canopy Frame(not included in this package)

B (6)New Canopy Fabric

ACCESSORIES

Ca (6)Bolt

Cb (12) Metal Washer

Cc (6)Nut

Ce (1)Allen Wrench

Cf (1)Open Hex Wrench

Cd (1)Assembly Instructions Sheet

2

Use the follwing parts from your orignal gazebo Use the follwing parts from the hardware

Gazebo Replacement Canopy

ASSEMBLY INSTRUCTIONS

1

2

3

Process of removing gazebo canopy

Process of replacing new gazebo canopy

Pull the bars of gazebo frame (A) from the canopy

pockets. Remove the bars of the canopy frame out

of the brackets of the legs. See Fig. 1.

Pull out the short top bars of the canopy frame (A)

from the wind vent canopy. Then remove the

canopy from the canopy frame (A). See Fig. 2.

Attach the canopy fabric (B) to the assembled canopy

frame (A). Insert each top short bar into each top pocket

of the canopy frame. Pull down the canopy and spread

the canopy top to the location. See Fig. 3.

3

A

Special WarningAssemble your gazebo on a soft, non-abrasive surface to avoid damage. The gazebo is heavy. Use care when handing.

Assembly by four adults is recommended. The gazebo is not intended to be a permanent structure. Take it down during

high winds or it may be damaged.

KEEP ALL FLAME AND HEAT SOURCES AWAY FROM CANOPY FABRIC

The canopy is made with flame-resistant fabric which meets CPAI-84 specifications. It is not fireproof. The canopy fabric

will burn if left in continuous contact with flame source. The application of any foreign substance to the canopy fabric

may render the flame-resistant properties ineffective.

CaCb

Cc

ACb

Fig. 1

Fig. 2

A

A

Fig. 3 B

Gazebo Replacement Canopy

4

CARE INSTRUCTIONS

Wash with a mild solution of soap and water; rinse thoroughly. Dry completely. Do not use bleach or solvents.

Cover furniture with outdoor furniture covers when not in use.

Made in CHINADistributed by Sears, Roebuck and Co., Hoffman Estates, IL 60179

See our extensive assortment of outdoor living productson-line at www.sears.com and www.kmart.com

For questions or comments about product:Call toll-free: 800-457-4652

Please refer to part numbers when reordering

Place the completed canopy onto the top of the assembled

leg posts. Make sure each crossbar is between two edges

of the canopy. Line up the holes, for each hole insert a

bolt (Ca) through a metal washer (Cb), short bar, a bracket,

another metal washer (Cb) and secure with a nut (Cc).

Don’t tighten completely. Repeat procedure for the remaining

five short bars. Tighten all bolts and nuts. Pull down the edge

of the canopy and insert each bar of the canopy frame (A) into

the pocket of the canopy. See Fig. 4. Affix inner edges with Velcro tabs.

Your gazebo with new canopy is now ready for use.

4

CaCb

Cc

ACb

Fig. 4

Gazebo Replacement Canopy