Email: market04@four-faith.com

Transmission line fault wireless monitoring application

Installing fault indicators that can collect cable temperature and current signal in the transmission

line, and convert related analog data into serial data by microcontroller, Four-Faith F2114 as a

transmission equipment to send them to data center through mobile network operator, vice versa, when

monitoring center need to ‘telemetry’, ‘remote communication’, ‘remote control’ terminal device, the data

is sent to F2114 transmission terminal through GPRS network, remote GPRS terminal will receive the

data by serial port to control fault indicators, bidirectional data transmission.

Quickly display failure time, location, phase position, error type and other information on monitoring

center. This system improve the efficiency of fault finding.

Why Four-Faith?

1. Multi-center transmission:

Support simultaneous transmission of multiple data centers (five data centers), to facilitate the

management departments to get data for efficient management.

2. Low power consumption:

Low power consumption design, with a strong advantage in the application of solar energy, wind

power, etc.

3. High signal sensitivity:

With higher signal reception sensitivity, can quickly get the strongest signal, to ensure reliable data

transmission.

4. Lightning protection & damp proof:

Four-Faith F2X14 low power consumption wireless communication terminal, lightning protection

has done a corresponding optimization, effective way to avoid fatal damage to the equipment caused by

lightning storm.

5. Easy wiring:

Use terminal block, provide 5 X I/Os (3 X digital I/Os, 2 X analog inputs) for easy access to a variety

of the sensors.

Related Product

F2114

1. High environment adaptability

2. High signal sensitivity

3. Low power consumption