Click here to load reader
Upload
mike-green
View
123
Download
0
Embed Size (px)
DESCRIPTION
How to come up with really fascinating diy style ideas? Choose the organza ribbon and pearl beads. These two distinctive stuffs may totally contribute an amazing cool diy bracelets pattern.
Citation preview
DIY style ideas-make cool diy bracelets out of pearl
beads and organza ribbon
You may have seen those enchanting ribbon and
pearl bracelets in boutiques and wondered to know
how the ingenious diy style ideas were inspired.
Here is a little demonstration about these cool diy
bracelets. Besides the necessary pearl beads and
inches of organza ribbon, you may need no other
things except the assistive needle and sewing
thread.
Materials needed in the diy style ideas:
Ivory pearl (4mm & 8mm) Acrylic Bead-imitation
0.3mm Nylon Wire
Wide Organza Ribbon
Lobster Claw Clasp
Jumpring
Crimp bead (not shown in picture)
Scissors
Sewing needle
Instructions for creating such cool diy bracelets:
Step1: make the beaded pattern
How to come up with really fascinating diy style ideas? Choose the organza ribbon and pearl beads. These
two distinctive stuffs may totally contribute an amazing cool diy bracelets pattern.
1. Snip a long strand nylon wire, approximate
120cm;
2. Slide one 8mm onto the center;
3. Add one 4mm pearl bead onto each end and
then cross through one extra 8mm bead;
4. Do repeat the procedure3 until the beaded
portion reached an ideal length around your
wrist.
Step2: work the ribbon strip
1. Cut a long Organza Ribbon as well, fold it twice and
stack it into several small layers. For each layer, sew
it for fixing;
2. After finishing entire ribbon strip, secure the end
with crimp bead
Step3: sew the beaded branch with ribbon
4. Keep acting the above three processes until
sewing entire beaded branch onto the ribbon.
1. Start the sewing procedure from the back of
ribbon strand. Pass the sewing needle from back to
front;
2. Pass the needle through the 8mm pearl bead
from left to right;
3. Sew the needle from front to back of the ribbon;
Step4: work the closure
1. Simply pass one jumpring at one end;
2. Sew the clasp onto the other end.
See, you have it done! Pear beads are available in a
wide range of shapes and sizes, and so do the
romantic organza ribbon, and foremost, pearls and
ribbon will always make creative diy style ideas.
Hence, the best choice for cool diy bracelets is such
group of totally individual materials. Just do it
yourself!
Shop for an array of beads and charms please click:
http://www.pandahall.com/