7
A PROJECT REPORT ON “TPM Tracking Device For Machine Shop (S/W)” SUBMITTED BY Mr. JADHAV RAHUL SURESH Mr. KADAM GANESH RAJARAM(9561123429) Mr. KUMBHAR AMOL RAMCHANDRA Under Guidance of Dr. Mrs. S.B.PATIL Dr.J.J.Magdum College of Engineering, Jaysingpur

tpm tracking for machine shope--by ganesh kadam

  • Upload
    jjmcoe

  • View
    28

  • Download
    1

Embed Size (px)

Citation preview

Page 1: tpm tracking for machine shope--by ganesh kadam

A

PROJECT REPORT

ON

“TPM Tracking Device For Machine Shop (S/W)”

SUBMITTED BY

Mr. JADHAV RAHUL SURESH

Mr. KADAM GANESH RAJARAM(9561123429)

Mr. KUMBHAR AMOL RAMCHANDRA

Under Guidance of

Dr. Mrs. S.B.PATIL

Dr.J.J.Magdum College of Engineering, Jaysingpur

DEPARTMENT OF ELECTRONICS ENGINEERING

Academic Year

2014-2015

Page 2: tpm tracking for machine shope--by ganesh kadam

Dr.J.J.Magdum College of Engineering, Jaysingpur

DEPARTMENT OF ELECTRONICS ENGINEERING

CERTIFICATEThis is to certify that the project entitled,

“TPM Tracking Device For Machine Shop (S/W)”

is being submitted in partial fulfilment of the requirement for the degree of Bachelor

of Electronics Engineering under Shivaji University during the academic year 2014-

2015. This is the result of original work completed by,

Mr. JADHAV RAHUL SURESH (Roll No. 73)

Mr. KADAM GANESH RAJARAM (Roll No. 74)

Mr. KUMBHAR AMOL RAMCHANDRA (Roll No. 75)

And that, I have instructed and guided them for the said work from time to time and

found them to be satisfactory and progressive.

Dr. Mrs. S. B. Patil Dr. Mrs. V.V. Patil

Guide H.O.D.(ETRX)

Dr. A. K. Gupta

I/C Principal

Page 3: tpm tracking for machine shope--by ganesh kadam

Dr.J.J.Magdum College of Engineering, Jaysingpur.

DEPARTMENT OF ELECTRONICS ENGINEERING

Academic Year

2015-2016

CERTIFICATEThis is to certify that, the project titled

“TPM Tracking Device For Machine Shop (S/W)”

Is presented before Department Research Committee (DRC) by

Sr. No. Name Roll No.

1. Jadhav Rahul Suresh 73

2. Kadam Ganesh Rajaram 74

3. Kumbhar Amol Ramchandra 75

Under guidance of Dr. Mrs.S.B. Patil for the academic year 2014-2015.

The DRC has consented to give approval for the said project.

Head,

Department of Research Committee (DRC)

Department of Electronics Engineering

Page 4: tpm tracking for machine shope--by ganesh kadam

ACKNOWLEDGEMENT

Gratitude is the hardest emotion to express often one does not find adequate

words to convey that entire one feels.

We are very thankful to Dr. Mrs. Patil S.B. our project guide who played

defining role in shaping this report. Without her constant support, guidance and

assistance this report would not have been completed. We are very much glad to

express our gratitude towards her guidance. Every help and friendly support which

has been given by our guide.

We would also like to thank Prof. Dr. Mrs. V.V.Patil, H.O.D. Electronics

Department who with such derlying interest reviewed and endorsed this project

report.

Mr. JADHAV RAHUL SURESH

Mr. KADAM GANESH RAJARAM

Mr. KUMBHAR AMOL RAMCHANDRA

B.E. (Electronics)

Dr. J. J. Magdum College of Engineering, Jaysingpur.

Date - __/__/2015

Place - Jaysingpur