Code: - G882; RLM Large bore filtered pressure gauge

This is a purpose built gauge for the earthmoving and mining industries, where tyres have a liquid coolant or sealant

installed. Standard gauges will fail prematurely when contaminated by the installed products. For this we have

developed a gauge with a filtration block assembly to trap the contaminating materials! Also adding a longer hose for

easier valve access, and attached a large bore tyre chuck via a quick connect open-ended hydraulic coupler. The

chuck can be disconnected after a pressure check to allow the fluids to drain out of the assembly.

Stainless steel precision German made gauge, with 63mm easy to read dial face in 2 lbs increments with a rubber

gauge head protector; the whole assembly is lightweight yet robust!

A standard bore air chuck with matching coupler can be added, making this gauge assembly even more versatile.

To ensure our G882 gauge assembly conforms to the Australian Standards, every gauge assembly is tested on a

certified master test gauge prior to dispatch. …. A 3rd party NATA certified calibration report can be supplied at an

additional cost if required.

NB -: Dial type gauges are effected by; temperature, humidity, and atmospheric pressure. Your master and hand held gauge

may indicate different pressure readings of 1 – 4psi, + or –, depending on the current weather conditions, this can be normal,

and does not always indicate a faulty gauge, take note of the variation on the day and work accordingly.

"We Stock The Lot"

www.rlmdistributing.com.au