Upload
melek-soenmez
View
136
Download
3
Embed Size (px)
Citation preview
RADAR SYSTEM WITH ARDUINO PROCESSORMODULE S:• A RDUINO UNO• SG-9 0 SE RVO M OTOR• HC-SR04 ULTRA SON IC SE N SOR• PIE ZO B UZZE R• LE D
17.12.2016
FLOW CHART
1.Servo-motor rotates between 0 and 180 degrees
2.Ultrasonic sensor calculates distance continuously
1. Arduino UNO
3.Read the serial port periodically with a timer
4.Determine instant values of motor angle and calculated distance
2. Visual Studio
5.Show available COM ports on a combobox.
6.Start the system with a clickon the start button.
7. Draw radar with datas andshow instant angle on theprogress bar.
8.Execute the functionallity ifother buttons pressed
3. Visual Studio GUI
17.12.2016
Flow Chart Extractions
• Flow Chart.1 : Controlling the servo motor
• Flow Chart.2 : Controlling the ultrasonic sensor
• Flow Chart.3 & Flow Chart.4 : Serial communication between Arduino UNO processor and Visual Studio & Determining the instant valuse of angle and distance
• Flow Chart.5 : Showing the available COM ports and port connection
• Flow Chart.6 : Start button functionallity
• Flow Chart.7 : Drawing radar and controlling the progress bar
• Flow Chart.8 : Other button functionallities
17.12.2016
Flow Chart.1 : Controlling the servo motor
17.12.2016
Flow Chart.2 : Controlling the ultrasonic sensor
17.12.2016
17.12.2016
17.12.2016
Flow Chart.2 : Controlling the ultrasonic sensor
17.12.2016
Flow Chart.3 & Flow Chart.4 : Serial communication between Arduino processor and Visual Studio & Determining the instant valuse of angle and distance
17.12.2016
Flow Chart.5 : Showing the available COM ports
17.12.2016
Flow Chart.5 : Port connection
17.12.2016
Flow Chart.6 : Start button functionallity
17.12.2016
Flow Chart.7 : Drawing radar and controlling the progress bar
17.12.2016
Flow Chart.7 : Drawing radar
17.12.2016
Flow Chart.7 : Drawing radar
17.12.2016
Flow Chart.8 : Other button functionallities
17.12.2016
17.12.2016
17.12.2016
17.12.2016