Upload
himanshu-diwakar
View
34
Download
0
Embed Size (px)
Citation preview
CopyRight@JETGI 1
Microwave Cavity
By:- Mr. Himanshu Diwakar
Assistant ProfessorJETGI
MR. HIMANSHU DIWAKAR
CopyRight@JETGI 2
Microwave Cavity• In general, a cavity resonator is a metallic enclosure that confines the
electromagnetic energy. The stored electric and magnetic energies inside the cavity determine its equivalent inductance and capacitance.• The energy dissipated by the finite conductivity of the cavity walls
determines its equivalent resistance. • In practice,
1. The rectangular-cavity resonator, 2. Circular-cavity resonator, 3. And reentrant-cavity resonator
Are commonly used in many microwave applications.
MR. HIMANSHU DIWAKAR
CopyRight@JETGI 3
• Theoretically a given resonator has an infinite number of resonant modes, and each mode corresponds to a definite resonant frequency.• The mode having the lowest resonant frequency is known as the
dominant mode.
MR. HIMANSHU DIWAKAR
CopyRight@JETGI 4
Rectangular cavity
• A microwave cavity acts similarly to a resonant circuit with extremely low loss at its frequency of operation, resulting in quality factors (Q factors) up to the order of 106, compared to 102 for circuits made with separate inductors and capacitors at the same frequency.
Rectangular cavityMR. HIMANSHU DIWAKAR
CopyRight@JETGI 5
Where
represents the number of the half-wave periodicity in the x direction
represents the number of the half-wave periodicity in the y direction
represents the number of the half-wave periodicity in the z direction
• The wave equations in the rectangular resonator should satisfy the boundary condition of the zero tangential E at four of the walls.• These functions can be found as
MR. HIMANSHU DIWAKAR
CopyRight@JETGI 6
And
where m = 1, 2, 3, 4, … n = I, 2, 3, 4, ... p = 0, I, 2, 3, …
The separation equation for both TE and TM modes is given by
For a lossless dielectric, therefore, the resonant frequency is expressed by
for the dominant mode is the mode
MR. HIMANSHU DIWAKAR
CopyRight@JETGI 7
Figure shows the methods of excitation for the rectangular resonator.
Methods of exciting wave modes in a resonator.
The maximum amplitude of the standing wave occurs when the frequency of the impressed signal is equal to the resonant frequency.
MR. HIMANSHU DIWAKAR
CopyRight@JETGI 8
Cylindrical cavity• A circular-cavity resonator is a circular waveguide with two ends closed by a
metal wall.• The field solutions of a cylindrical cavity of length L and radius R follow from the
solutions of a cylindrical waveguide with additional electric boundary conditions at the position of the enclosing plates.
Cylindrical cavityMR. HIMANSHU DIWAKAR
CopyRight@JETGI 9
The wave function in the circular resonator should satisfy Maxwell's equations, subject to the same boundary conditions described for a rectangular-cavity resonator.
• Substitution of yields the resonant frequencies for TE and TM modes, respectively, as
• It is interesting to note that the mode is dominant where 2a > d, and that the mode is dominant when .
MR. HIMANSHU DIWAKAR
CopyRight@JETGI 10
Microwave resonant cavities can be represented and thought of as simple LC circuits.For a microwave cavity, the stored electric energy is equal to the stored magnetic energy at resonance as is the case for a resonant LC circuit
LC circuit equivalent for microwave resonant cavity
MR. HIMANSHU DIWAKAR
CopyRight@JETGI 11
Q Factor of a Cavity Resonator• The quality factor Q is a measure of the frequency selectivity of a
resonant or antiresonant circuit, and it is defined as
• At resonant frequency, the electric and magnetic energies are equal and in time quadrature. The total energy stored in the resonator is obtained by integrating the energy density over the volume of the resonator:
• Where E and H are the peak values of the field intensities.
MR. HIMANSHU DIWAKAR
CopyRight@JETGI 12
Cont’d• The average power loss in the resonator can be evaluated by
integrating the power density as given
• So
• Since the peak value of the magnetic intensity is related to its tangential and normal components by
MR. HIMANSHU DIWAKAR
CopyRight@JETGI 13
Cont’d• where is the peak value of the normal magnetic intensity, the value of
at the resonator walls is approximately twice the value of averaged over the volume.• So the Q of a cavity resonator
• An unloaded resonator can be represented by either a series or a parallel resonant circuit. The resonant frequency and the unloaded of a cavity resonator are
MR. HIMANSHU DIWAKAR
CopyRight@JETGI 14
Cont’d• If the cavity is coupled by means of an ideal N: 1 transformer and a series
inductance to a generator having internal impedance , then the coupling circuit and its equivalent are as shown
Coupling circuit. Equivalent circuit.
MR. HIMANSHU DIWAKAR
CopyRight@JETGI 15
Cont’d• The loaded of the system is given by
• The coupling coefficient of the system is defined as
• And the loaded would become
MR. HIMANSHU DIWAKAR
CopyRight@JETGI 16
Cont’d
• There are three types of coupling coefficients:1. Critical coupling:
If the resonator is matched to the generator, then
MR. HIMANSHU DIWAKAR
CopyRight@JETGI 17
2. Overcoupling: If K > 1
• The cavity terminals are at a voltage maximum in the input line at resonance. The normalized impedance at the voltage maximum is the standing-wave ratio . That is
The loaded is given by
3. Undercoupling: If K < 1The cavity terminals are at a voltage minimum and the input terminal impedance is equal to the reciprocal of the standing-wave ratio. That is
The loaded is given by
MR. HIMANSHU DIWAKAR
CopyRight@JETGI 18
The relationship of the coupling coefficient K and the standing-wave ratio is shown in Fig.
MR. HIMANSHU DIWAKAR
CopyRight@JETGI 19
Thank youMR. HIMANSHU DIWAKAR