Upload
pranit-malgaonkar
View
275
Download
0
Embed Size (px)
Citation preview
1
MICROPARTICLE CHARACTERIZATION USING
DIGITAL HOLOGRAPHY
By Pranit P. Malgaonkar
Guided By – Prof. Nitin Satao
2
CONTENT1) Micro particle Characterization & methods of particle characterization
2)Introduction to digital holography
3)Holography and hologram
4)Digital in line holographic microscopy
5)Digital hologram processing for particle measurement
6)Advantage
7)Conclusion
8)References
3
Micro particle Characterization & methods of particle characterization
particle size, particle shape, and surface area analysis of any particle larger than 1 micron, but smaller than 1 mm should be called a micro particle Characterization
4
5
INTRODUCTION TO DIGITAL HOLOGRAPHY
Digital holography :- Digital holography is an effective 3D technique with the potential to be used for measurements of the position , size distribution , and speed of particles or other micro objects suspended in fluid
Digital holography provides 3D volume information from a single hologram acquisition. The actual location of particle can be determined subsequently by reconstructing the recorded hologram at different depths.
6
HOLOGRAPHY AND HOLOGRAMS
Holography is a photographic technique that records the light scattered from an object, and then presents it in a way that appears three-dimensional.
7
Digital in line holographic microscopy
8
Digital hologram processing for particle measurement
Steps of hologram processing algorithm :-
a) Numerical reconstruction
b) Image segmentation
c) Localization of a particle
d) Particle size and shape measurements
9
10
ADVANTAGE
In comparison with classical film based holography the use of digital holography is more attractive due to the ease of set up and recording process using digital camera
It is possible to experiment a phenomena during a long time without modification of the setup and to compensate numerically for specimen movements afterwards
11
CONCLUSIONS
A particle size measurement methodology based on digital holographic microscopy was presented. The size and shape measurements obtained using digital holography microscopy show good agreement with the given size and shape measured using independent techniques the results obtained in this study extend the potential of digital holography for applications in particle characterization
12
REFERENCES
MICROPARTICLE CHARACTERIZATION USING DIGITAL HOLOGRAPHIC MICROSCOPYEmmanouil Darakis,Taslima khanam , Arvind rajendran, Vinay kariwala, Thomas j. naughton , Anand k. asundi Chemical Engineering science 65(2010)1037-1044www.elsevier.com/locate/ces
13
THANK YOU