Prepared by:

Mustafa Abdolmotaleb

1

Agenda

Project Objectives

Steps of building pipesim network model

Building well models

Pressure \ temperature profile

Inserting ESP performance curve

Modeling Multi-Zones well (3 Zones)

Constructing the Network Model

Displaying the results

Conclusion

2

Project Objectives

To build a representative network model for one

OGM(Oil Gathering Manifold) in H Field consists of

4 wells using PIPESIM software.

To match the network model with the field data.

To display & analyze the results after building the

model.

3

Steps of building pipesim network model

Interpretation of results

Run model

Define boundary conditions

Select flow correlation

Make single branch model

Build and connect network model

Set fluid data for black oil

Units

Select pipes in model

4

Building well models

5

Pressure/Temperature Profile

6

Inserting ESP Performance Curves

7

Modeling Multi-Zones well (3 Zones)

Black Oil Model

8

Pressure/Temperature Profile

9

Constructing the Network Model

10

Displaying the results

11

Displaying the results

12

Conclusion The model has been matched with the real field data.

The model is now reliable for further production

optimization analysis.

All the pressure/Temperature profiles for all the wells

have been calculated from the reservoir to the delivery

point.

13