Upload
aung-khaing-htun
View
162
Download
6
Embed Size (px)
Citation preview
ELECTRIC MOTOR BEARING LUBRICATION
BY: AUNG KHAING HTUN LUBE ENGINEER
AIM• To understand how the proper lubrication of electric motor bearing is
essential.
• To know how to choose right electric motor grease
• To know the correct procedure greasing the motor bearing
Guide to electric motor bearing lubrication
• Grease Lubrication
• Choosing right electric motor grease
• Adding grease to electric motor bearings
Grease Lubrication
• reduce friction and wear• protect bearings against corrosion• act as a seal to prevent entry of contaminants
POLYUREAMobil Polyrex EMMobilith SHC 100
Choosing right electric motor grease
• Viscosity• Consistency• Oxidation resistance• Anti-wear• Dropping point• Shear stability
Adding grease to electric motor bearings
Right time
Right amount
Right way
• Speed
• Temperature
For each 10°C above 65°C Interval Should be Reduced by Half
• Size
Motor Size Grease Interval Up to 75 HP Yearly75 to 250 HP 6 Months Above 250 HP 2 Months
Right time
Right time
Right Amount• Only the grease in the bearing
should be replaced: G = .114 x D x B G = Grease ounces
• D = OD inches
• B = Width inches
Translate to gun strokes by calibrating gun for strokes/ounce
Right Amount- Grease Gun Calibration Check -
Right Amount
Right Amount
Right Way• Remove drain plug, clean old grease
from drain opening
• Clean pressure fitting, grease gun nozzle
• Pump specified amount of grease into fitting
• Run machine until rotating parts expel excess, temperature normalizes (± 10 minutes)
• Replace drain plug
Right WayIndustrial Best Practice
Right WayIndustrial Best Practice
TIPs
THANKS FOR YOUR ATTENTION