Upload
flare-electricals-llp
View
138
Download
8
Embed Size (px)
Citation preview
ISO 9001:2008 Certified Company
FLARE ELECTRICALS LLP www.flareelectricals.com [email protected]
SOLID COPPER EARTH ROD AND ACCESSORIES
Solid Copper Earth Rod
Pure Copper Earth Rods are made of pure (100%) electrolytic copper. The Earth Rods are hard drawn from extruded
copper bars. Pure copper earth rods are preferred where soil conditions are very aggressive & corrosive. The rods are
threaded internally to make it extensible for deep driving with the help of couplers.
Earth Rod Dia Length Thread Part No.
15mm 1200mm M10 FLE-SCER-15-1.2
15mm 1500mm M10 FLE-SCER-15-1.5
15mm 2400mm M10 FLE-SCER-15-2.4
16mm 1200mm M10 FLE-SCER-16-1.2
16mm 1500mm M10 FLE-SCER-16-1.5
16mm 2400mm M10 FLE-SCER-16-2.4
20mm 1200mm M10 FLE-SCER-20-1.2
20mm 1500mm M10 FLE-SCER-20-1.5
20mm 2400mm M10 FLE-SCER-20-2.4
* other sizes available on request
FLARE ELECTRICALS LLP www.flareelectricals.com [email protected]
Coupling Dowel
Coupling dowel made of brass, stainless steel or gunmetal is a threaded joining devise which joins two earth rods together
for extending earth rods in an earthing system
Thread Dia. Length Material Part No.
M10 40mm Brass FLE-CD-10
M12 40MM Brass FLE-CD-12
Driving Head
Driving heads are made of toughened steel and used while hammering an earth rod into ground. Driving head protects the
relatively soft earth rod from damage while hammering. Driving heads have no further function in earthing & lightning
protection.
Rod Dia. Thread Dia. Part No.
16 M10 FLE-DH-16
20 M10 FLE-DH-20
25 M12 FLE-DH-25
Driving Spike
Driving spikes are made of toughened steel and used as a pointed guide while hammering an earth rod into ground. The
pointed tip of driving spike pierces the soil so that earth rods are smoothly driven down the ground. Driving spikes have
no further function in earthing & lightning protection.
Rod Dia. Thread Dia. Part No.
16 M10 FLE-DS-16
20 M10 FLE-DS-20
25 M12 FLE-DS-25
FLARE ELECTRICALS LLP www.flareelectricals.com [email protected]
COPPER BONDED STEEL EARTH ROD AND ACCESSORIES
Copper bonded steel earth rods are the most commonly used earth electrode. They are suitable for most application,
compatible for deep driving & are economical. Copper bonded steel earth rods are made by molecularly bonding 99.9%
pure copper onto high carbon, low tensile steel rods.
Thread Size Length Rod Dia. Part No.
5/8" 1200mm 13.70mm FLE-CBSER-58-1.2
5/8" 1500mm 13.70mm FLE-CBSER-58-1.5
5/8" 1800mm 13.70mm FLE-CBSER-58-1.8
5/8" 2400mm 13.70mm FLE-CBSER-58-2.4
5/8" 3000mm 13.70mm FLE-CBSER-58-3.0
3/4" 1200mm 16.70mm FLE-CBSER-34-1.2
3/4" 1500mm 16.70mm FLE-CBSER-34-1.5
3/4" 1800mm 16.70mm FLE-CBSER-34-1.8
3/4" 2400mm 16.70mm FLE-CBSER-34-2.4
3/4" 3000mm 16.70mm FLE-CBSER-34-3.0
* other sizes available on request
** we provide upto 250 micron copper coating on earth rods
FLARE ELECTRICALS LLP www.flareelectricals.com [email protected]
Coupler
Couplers made of brass, stainless steel or gunmetal is a threaded joining devise which joins two
earth rods together for extending earth rods in an earthing system.
Size Material Part No.
5/8" Brass FLE-C-58
3/4" Brass FLE-C-34
* other sizes available on request
** coupler available in other materials, Phosphor Bronze / Silicon Bronze /
Gunmetal
Driving Head
Driving heads are made of toughened steel and used while hammering an earth rod into ground.
Driving head protects the relatively soft earth rod from damage while hammering. Driving heads
have no further function in earthing & lightning protection.
Size Material Part No.
5/8" Steel FLE-DH-58
3/4" Steel FLE-DH-34
* other sizes available on request
FLARE ELECTRICALS LLP www.flareelectricals.com [email protected]
LIGHTNING PROTECTION ACCESSORIES
Tapered Air Rod
Taper pointed air rod is a part of air termination network of a lightning protection system. Air rods are supplied with nuts
enabling the rod to be locked tight against the conductor. These taper pointed air rods are made of pure copper.
Thread Dia. Length in mm Part No.
M16 300 FLE -AR-01
M16 500 FLE-AR-02
M16 1000 FLE-AR-03
M16 1500 FLE-AR-04
M16 2000 FLE-AR-05
M20 300 FLE-AR-06
M20 500 FLE-AR-07
M20 1000 FLE-AR-08
M20 1500 FLE-AR-09
M20 2000 FLE-AR-10
FLARE ELECTRICALS LLP www.flareelectricals.com [email protected]
Multipoint
Multipoint is used in conjunction with the taper pointed air rods.
Air Rod Dia. In mm
Part No.
16 and 20 FLE-MP
Air Terminal Base
Air rod base is used to support air rods on flat roof surfaces. Air rod base is made from copper alloy.
Thread Dia. Part No.
M16 FLE-ARS-16
M20 FLE-ARS-20
FLARE ELECTRICALS LLP www.flareelectricals.com [email protected]
Air Rod Ridge Saddle
These ridge saddles are used to support air rods on roof ridges.
Thread Dia. Part No.
M16 FLE-ARRS-16
Air Rod Brackets
Air rod brackets are used in conjunction with the rod to tape coupling used to secure the flat tape to air rod. These air
rod brackets are made from copper alloy.
Rod Size. Part No.
16 FLE-ARB-16
20 FLE-ARB-20
FLARE ELECTRICALS LLP www.flareelectricals.com [email protected]
DC Tape Clips
D.C. tape clip secures the flat tape conductor to the building surface. These D.C. clips are made from Copper Alloy.
Conductor Size in mm.
Part No.
20x3 FLE-DCTC-20x3
25x3 FLE-DCTC-25x3
25x6 FLE-DCTC-25x6
31x3 FLE-DCTC-31x3
31x6 FLE-DCTC-31x6
50x3 FLE-DCTC-50x3
50x6 FLE-DCTC-50x6
Copper Tape Clip
Copper tape clips hold the flat conductor to building surface. Copper Tape ClipS are made from pure copper.
FLARE ELECTRICALS LLP www.flareelectricals.com [email protected]
Conductor Size in mm.
Part No.
20x3 FLE-TC-20x3
25x3 FLE-TC-25x3
Square Tape Clamps
Square tape clamps are suitable for making cross, straight through and Tee joints in flat tape. The base has a
countersunk hole in the middle for securing the clamp to the building surface and the lid is fixed by means of four
screws. Square tape clamps are made from copper alloy.
Conductor Size in mm.
Part No.
25x3 FLE-STC-25x3
25x6 FLE-STC-25x6
31x3 FLE-STC-31x3
31x6 FLE-STC-31x6
50x3 FLE-STC-50x3
50x6 FLE-STC-50x6
FLARE ELECTRICALS LLP www.flareelectricals.com [email protected]
Oblong Test Clamp
Oblong test clamp is used to join a range of tape sizes in straight through position. These clamps are also used to allow
the conductor to be overlapped by two set screws. These clamps are made from copper alloy.
Conductor Size in mm.
Part No.
26x8 FLE-OTC-26x8
51x10 FLE-OTC-51x10
FLARE ELECTRICALS LLP www.flareelectricals.com [email protected]
CLAMPS AND FITTINGS
Earthing clamps are used to connect earth electrode (earth rods) with conductors or tapes. The clamps are made of gunmetal.
Rod to Tape Clamp ( Type A )
Earthing clamps are used to connect earth electrode (earth rods) with conductors or tapes. A Type Clamps
are one type of earthing clamp, used to join earth rods and copper tapes. The earth rod and tape passes
through the clamp body and a screw fastener secures both together. Type A clamps are made of gunmetal or
brass.
Size Material Part No.
26 x 12mm Gunmetal FLE-A-2612
31 x 12mm Gunmetal FLE-A-3112
40 x 10mm Gunmetal FLE-A-4010
51 x 8mm Gunmetal FLE-A-5108
* A clamps are available in Brass also.
** Choice of fastners include MS / Brass / SS
FLARE ELECTRICALS LLP www.flareelectricals.com [email protected]
Rod to Cable Clamp ( Type G )
Earthing clamps are used to connect earth electrode (earth rods) with conductors or tapes. G Type Clamps
are one type of earthing clamp, used to join earth rods and copper circular conductors. The earth rod and
conductor passes through the clamp body and a screw fastener secures both together. G clamps are made of
gunmetal or brass.
Size Material Part No.
1/2" Gunmetal FLE-G-12
5/8" Gunmetal FLE-G-58
3/4" Gunmetal FLE-G-34
1" Gunmetal FLE-G-1.0
* G clamps are available in Brass also.
** Choice of fasteners include MS / Brass / SS
Rod to Cable Clamp (Type O)
These Clamps are used for joining earth rods to different sizes of Copper Conductor. Type O
clamp are made from Brass.
Size Material Part No.
5/8" Brass FLE-O-58
3/4" Brass FLE-O-34
** Choice of fasteners include MS / Brass / SS
FLARE ELECTRICALS LLP www.flareelectricals.com [email protected]
U Bolt Rod Clamp ( Type E )
Earthing clamps are used to connect earth electrode (earth rods) with conductors or tapes. E Type Clamps
are one type of earthing clamp, used to join earth rods and copper tapes. The earth rod passes through the
clamp body while the copper tape is fitted through the U Bolt. E clamps are made of gunmetal or brass.
SIZE MATERIAL PART NO
16mm Gunmetal FLE-E-16
20mm Gunmetal FLE-E-20
25mm Gunmetal FLE-E-25
31mm Gunmetal FLE-E-31
38mm Gunmetal FLE-E-38
50mm Gunmetal FLE-E-50
* E clamps are available in Brass also. Available in Single and double plate.
** Choice of fasteners & U bolt include MS / Brass / SS.
U Bolt Rod Clamp ( Type GUV )
Earthing clamps are used to connect earth electrode (earth rods) with conductors or tapes. GUV Type
Clamps are one type of earthing clamp, used to join earth rods and copper circular conductors. The earth
rod and conductor passes through the clamp body and nuts and bolts secure both together. GUV clamps are
made of gunmetal or brass.
SIZE MATERIAL PART NO
16-70Sqmm Gunmetal FLE-GUV-1670
70-185Sqmm Gunmetal FLE-GUV-70185
150-300Sqmm Gunmetal FLE-GUV-150300
* GUV clamps are available in Brass also.
** Choice of fasteners & U bolt include MS / Brass / SS
FLARE ELECTRICALS LLP www.flareelectricals.com [email protected]
PUB Type Clamp
PUB Type Clamps are one type of earthing clamp, used to join pipe with cable. PUV clamps are
made of gunmetal or brass.
Size Material Part No.
5/8" Gunmetal FLE-PUB-58
3/4" Gunmetal FLE-PUB-34
1" Gunmetal FLE-PUB-1.0
1 1/2" Gunmetal FLE-PUB-1.5
2" Gunmetal FLE-PUB-2.0
2 1/2" Gunmetal FLE-PUB-2.5
3" Gunmetal FLE-PUB-3.0
4" Gunmetal FLE-PUB-4.0
* PUB clamps are available in Brass also.
** Choice of fasteners & U bolt include MS / Brass / SS
FLARE ELECTRICALS LLP www.flareelectricals.com [email protected]
Earth Plate
Earthing plates are used as a part of earthing network. They provide long lasting solution
where earth rods are unsuitable. Earthing plates are made of solid copper or mild steel
with copper bonding.
Size in mm Part No.
300x300x3mm FLE-EP-1
500x500x1.5mm FLE-EP-2
500x500x3mm FLE-EP-3
600x600x1.5mm FLE-EP-4
600x600x3mm FLE-EP-5
900x900x3mm FLE-EP-6
1000x1000x3mm FLE-EP-7
1200x1200x3mm FLE-EP-8
Earth Bar
No. of
Terminals Length Width Part No.
6 400 90 FLE-EB-6
8 500 90 FLE-EB-8
10 650 90 FLE-EB-10
12 750 90 FLE-EB-12
14 850 90 FLE-EB-14
16 950 90 FLE-EB-16
18 1100 90 FLE-EB-18
FLARE ELECTRICALS LLP www.flareelectricals.com [email protected]
20 1250 90 FLE-EB-20
22 1300 90 FLE-EB-22
24 1400 90 FLE-EB-24
26 1550 90 FLE-EB-26
28 1650 90 FLE-EB-28
30 1800 90 FLE-EB-30
* Available with Single and Double disconnecting links.
FLARE ELECTRICALS LLP
503, Bldg No.10, Greenways Complex, Agarwal Bldg., Western Express Highway,
Dahiser Check Naka, Mumbai, Thane - 401104, India.
email: [email protected]
website: www.flareelectricals.com