Dr. Sarasij Das

1

This Presentation is based on the paper

Sarasij Das, and Tarlochan Sidhu, "Detecting Synchrophasors

Computed Over Fault/Switching Transients", IET Generation,

Transmission & Distribution,

http://digital-library.theiet.org/content/journals/10.1049/iet-gtd.2013.0493

2

Brief overview of Wide Area Measurement

Systems (WAMS)

Proposed algorithm

Conclusions

3

4

Voltage/current waveforms sinusoid in nature

Phasor = representation of sinusoid in complex

plane

Phasors estimated by measuring

- magnitudes

- phase angles

Traditional SCADA monitoring slow

One complete SCADA polling may take 2-10 s

Measurements are not time synchronized

Phase angle measurement no possible

Not suitable for system dynamics monitoring

7

WAMS = PMU based monitoring systems

Synchrophasor = phasor + GPS time tagging

Synchrophasor = magnitude & phase angles

Synchrophasors used in system dynamics

monitoring

8

Control Center

Voltage, Current Synchrophasors

9

IEEE standard C37.118.1-2011[2] specifies

accuracy requirements for synchrophasors

IEEE standard C37.118.2-2011[3] specifies

message formats for communication data packets

IEEE standard C37.244-2013 [4] describes functional requirements for PDCs

10

11

12

Context Synchrophasor validations mostly happen in

PDCs

Validation often offline and time consuming

Lack of samples makes validation difficult in PDCs

Lack of algorithms to compute synchrophasor quality at PMU

13

Motivation

Fault/switching transient synchrophasors

computed over pre and post fault/switching

samples

Unusable in applications

Not easy to detect from values

1( ) 89.998

2

1.0045( 1) 90.1340

2

X k

X k

14

Motivation

No existing Algorithm

However, Algorithms [1][5] can be used

Existing Algorithms [1][5] make wrong detections in

presence of harmonics, decaying dc

15

Proposed low complexity algorithm to detect

fault/switching transient synchrophasor

16

17

Suggested to apply on current signals

Success Rate

18

X=Xm [1+ksx u(t-ts)]cos(ωot +ksa u(t-ts))

19

Performance

during

Oscillations

20

Performance

in presence of

missing samples

21

22

23

Proposed algorithm performs satisfactorily

- during nominal and off-nominal frequencies

- in presence of harmonics, decaying DC

- in presence of oscillations, ramping

- in presence of a number of missing samples

- for estimation windows 2.5 cycles or

greaterPlease see the paper for additional results

24

Algorithm has been proposed to tag fault/switching

transient synchrophasors

Proposed algorithm performs satisfactorily in various

scenarios

25

1. “Synchronized phasor measurements and their applications”, by Arun G. Phadke, John Samuel Thorp

2. “IEEE Standard for Synchrophasor Measurements for Power Systems”, IEEE C37.118.1-2011, (Revision of IEEE Std. C37.118-2005)

3. “IEEE Standard for Synchrophasor Data Transfer for Power Systems”, IEEE C37.118.2-2011

4. “IEEE Guide for Phasor Data Concentrator Requirements for Power System Protection, Control, and Monitoring”, IEEE Std C37.244-2013

5. Sodhi, Ranjana, S. C. Srivastava, and S. N. Singh. "A transient monitor to reflect the quality of synchrophasors." Power and Energy Society General Meeting, 2010 IEEE. IEEE, 2010.

26

27