Cranes and Heavy Equipment

GIANT CRANES Known as the only true heavy lift ‘crane’ in the world and the only Third Generation with 120,000 Tm (3200 metric ton lifting capacity), constructed.  Designed to accommodate the heavy lifting requirements for refinery, oil and gas, mining,

SELF PROPELLE

D MODULAR TRAILERS

Hydraulic Cranes

Marine JettyGiant Cranes

cranes & heavy Equipments

offshore platform and third generation components for nuclear power plants, this heavy lift crane meets all US and European Lift Crane Standards and is CE certified.

Strong heavy lifting apparatus with high load moment Limited footprint Low ground bearing pressures On-site flexibility Flexible worldwide transportation Versatile lifting machine

Modern machinery mounted with hydraulic telescopic cranes, fixed and whirling telescopic handlers, forklift trucks with the construction areas vehicles of different capacities and tonnages

Rigging Equipment

Shackles (standard, heavy duty, wide body or sling) Slings & Grommets (4-point lifting tackle, doubled sling,

snatch block/sheave, equalizer beam, spreader beam) Azobe Mats (Azobe wedges and reinforced azobe wedges)

Hydraulic Cranes

30 ton 30 < 40 ton 40 < 50 ton 40 < 50 ton 50 < 70 ton 70 < 90 ton 90 < 120 ton 120 < 200 ton 200 < 250 ton 250 <500 ton < 500 ton

Lattice Boom Cranes

100 ton 100 < 150 ton

150 < 200 ton 200 < 300 ton 300 < 600 ton > 600 ton

SELF PROPELLED MODULAR TRAILERS

Being used in a wide range of industries such as transport civil constructions and petrochemical land peripherals. During load-outs, they are often used as vehicle to drive heavy load components from the quay onto the barge. One trailer consists of different modules from 4 or 6 axle lines with a capacity of 36 up to 48 tons per axle line each. The lifting height of heavy load components is 500 mm estimation.

GANTRIES

Tower systems combined with strand jacks or gantries can be equipped with its own jacking or climbing systems. Towers in pairs (vessel lifts) or in multi-coupled lifting units (module lifts) to obtain the required lifting set-up. Available equipment can carry a top side of an oil rig of 12.000 tons and the installation of a 6.000 tons shipyard gantry on a height of 140m.

JACKING

An alternative for lifting objects and is often used for the jacking of bridges and modules from construction height to its final position.

Climbing Jack

maximum height: 9 m bracing possible semi-automatic in-house designed

Perpetuum Jack

low minimal jacking height: 450 mm capacity: 250 t per jacking position easy assembly thanks to light jacking elements in-house designed

SKIDDING

Used for moving and positioning heavy structures on a built up skid track. Available skidding system can operate up to 18.000 tons.

PONTOONS

The ‘Twin barge’ concept is a custom-built fleet consisting of 3 different sized pairs of barges according to the restrictions of the vast European network of rivers and canals. Provided with own barges, it supports project work such as mounting activities from the water and/or transport activities over inland waterways and seas and bridges positioning. It has anchors and auxiliaries, fleet of station winches, numerous ballast structures, and links pan bridges with variety of lengths and diverse accounts of other equipment and systems

TOWER CRANES

Latest design of balance crane having the same basic parts with height and lifting capacities that are being used in the construction of skyscrapers or tall buildings.

A hook height of over 200m, maximum of 900m, freestanding and can carry up to 64 tons

Operating speed up to 200m/min Rail-going portal up to 90m tower height with freestanding

hook height Operation system to maximum 17m/sec wind speed Setting of out of operation position within minutes, do not

require to put down the jib Possible without required foundation anchors radius Additional space not needed

Installation can be done indoor or even at the construction site

Cooling of the blanch at counterweight benefits stable operation in the inner operation range

Assembly weights of only maximum 28tons

LATTICE BOOM CRANES

A pedestal mounted crane with sectioned boom constructed from lattice steel members. Lightweight boom design allows for higher lifting capacity and longer boom lengths. Applications include FPSO’s, fixed and floating platforms.

Types

Truck mounted till 1.000T Crawler cranes till 1.650T Pedestal cranes till 2000T

Available fleet

15 cranes with capacity of > 1.000T SGC-120(3.200T): lattice boom crane on double ring 1.500 cranes of all kinds in worldwide fleet Average fleet age: 5 to 6 years

STRAND JACKS

These are used to lift civil constructions or power plant components through hydraulic cylinders and steel wires (strands), the heavy load component is lifted to the required height or pulled (skidded) to a certain position. Capacities starting from 15 tons up to 1130 tons.

HANDLING FACILITY AND CAPABILITIES

25 M Ton 10 M Ton 5  Ton Under hook height of 7.0 meters, Span 22.0 meters Maximum Capacity inside workshop is 50 M Ton

Gantry Crane

Or called as bridge cranes and overhead cranes which lift objects by a heave fitted in a hoist trolley and can be moved horizontally on a rail or pair of rails fitted under a beam.

2x10T – 20T cap with 10 meters height under hook Span 18.0 meters Maximum travel is 110 meters

Dredge 50’length

Dredge is powerful machine, a barge for dredging up or removing earth, dragnet or other contrivance for gathering material or objects from the bottom of a body of water, by means of a scoop, a series of buckets, a suction pipe, or the like.

1x90T cranes 1x70T cranes

Mobile Cranes

These are the powerful, a compact and maneuverable machines that are best for combined road and off-road operating requirements on construction sites of all kinds. Mobile cranes are hydraulic – powered crane with a telescoping boom mounted on truck – type carriers or called as self – propelled models. Mostly used in different types of load and cargo with almost no setup or assembly needed.

From 18 M Ton- 600 M Ton

Fork lifts

Forklifts are usually called as fork truck or lift truck as it is a powered industrial truck to lift and move materials in short distances. Its pronged device in front is the responsible for lifting and carrying loads.

4.0 M Ton-10.0 M Ton

Yard Tower Crane

Used to lift steel, concrete and the other variety of building materials for loading/unloading tower crane equipment on and off semi – trucks moving in/out of the yard

8 M Ton capacity 50.0 meters boom 125.0 meters travel

MARINE JETTY

Engineering structures connected with harbor and coastal works designed to control the current or tide or to protect a harbor or beach from waves (breakwater). May be built out a intervals from the banks of rivers where a wide channel is narrowed to concentrate the current.

Landing Craft berthed with 86m craft length (jetty 104 meters)

104 meter with 6 meter deep

TERRAIN CRANES

A kind of mobile crane with the necessary equipment to travel at speed on roads and rough terrain at the job site using all – wheel and crab steering. Used for both on and off-road construction and industrial projects.

From 30 tons to 300 tons Crawlers and truck  cranes All terrain and rough Kobelco, Liebherr, XCMG, Terex Demag, Tadano

TURNKEY SERVICE SOLUTIONS

2 LTMs Tandem lift of M6 Structure Liebherr LR 1300 lifting of generators CC 6800 LTM Crane Liebherr LR-1200

Nicolas Trailer Transporting Vessel of 300 Tons Liebherr 1300, Lifting Gantry Crane columns Liebherr LTM-1250 Demag CC 2400 LR 1160, Lifting of Ventilation Concrete Pipe Liebherr LR 1200 LTM 1500 Liebherr LTM 1200 & LTM 1160

OTHER CRANES

 Multi-handler/Multi-loader

Cranes with a combination of the capabilities of a modern telescopic handler with special safety features. The elevating cab provides the driver with an optimal overview of the goods to be lifted enabling them to carry out the goods handling process safety and optimally. Skid Steering, High Maneuverability & Short tuning radius.

305 (5t, 7.3m, 91 kW, 11.5 t) 305 XL (5t, 9.0m, 91kW, 11.8t) 310 Multiloader (10t, 9.3m, 144 kW, 21t)

Timber Handling

Machines for pick and carry, a very strong drive and transportation machine with extraordinary high lifting capacity. It can load and can be transported and stacked at very narrow space, through all wheel steering.

718 M – Multi – functional machine for efficient harvesting of fuel wood, landscape conservation, round timber manipulation, equipped with a variety of attachments

723 M-HD – Pick and carry: very strong drive – and transportation machine with extraordinary high lifting capacity. Loads and goods can be transported and stacked at very narrow space, through all wheel steering

730 M-HD – perform pick – and – carry operations and to cater for the requirements of the woodworking industry. A powerful and robust transport machine is very easy to maneuver.

830 M-T – specifically for logging work, engineered for both fast loading cycles and heavy trailer pulling.

Material Handling Machines

818 M 818 R 821 M 821 R 825 M 825 R 830 M 830 MHD 830 R 830 R Special 830 R-HDD 830 Vario Tool 835 M 835 R 835 M special 835 R special 840 M 840 R 850 M 850 R 850 M special 850 R special 860 M 860 R special 860 M special 860 R special 870 M 870 R 870 M special 870 R special 870 M Gantry

880 M 880 R 880 EQ

HD Crawler Cranes

620 HD 630 HD 630 M 655 HD 680 HD 690 HD

6100 HDADGECO GROUPThree Sails Tower Corniche Road 1204 SuiteBuilding No. 27w10 P.O.Box 549, Abu Dhabi, UAE(+971) 2-681-3111www.adgeco.com