18
C OOLANT SEPARATOR Panchal Girish R. Panchal Vinay A. Panchal Hitesh M.

Coolant separator

Embed Size (px)

Citation preview

Page 1: Coolant separator

COOLANT SEPARATOR

Panchal Girish R.

Panchal Vinay A.

Panchal Hitesh M.

Page 2: Coolant separator

INTRODUCTION

Machine tool technology

New machining techniques

Proper selection of coolants

Separation techniques

Filtration system

Page 3: Coolant separator

INTRODUCTION

COOLANT SEPARATOR has a filtration system for

various machines tools & chips and scrap mediums.

Page 4: Coolant separator

WHAT IS

COOLANT SEPARATOR?

“COOLANT SEPERATOR” is a machine, which

separates the Coolant from chips and scraps.

The Coolant separator works on the principle of

centrifugal force.

Page 5: Coolant separator

WORKING PRINCIPLE

Page 6: Coolant separator

What we have created?

Page 7: Coolant separator
Page 8: Coolant separator
Page 9: Coolant separator

WORKING PRINCIPLE

• The rotating perforated drum surrounded with

the casing container is fixed on the central shaft.

• These are held at their own place while rotating

but the loosely placed chips and the scrap

particles are thrown centrifugally away from the

central axis.

Page 10: Coolant separator

WORKING PRINCIPLE

• The coolant is collected in the outer casing

surrounding the perforated container.

• Thus it is let out & gives filtered coolant, & chips

and scraps are separated.

Page 11: Coolant separator

CUTTING COOLANT

o The cutting coolant removes heat and lowers the

temperature at the cutting zone.

o It also increases tool life.

o The power consumption is also less while using

lubricant.

Page 12: Coolant separator

CUTTING COOLANT

o In a workshop which has a variety of machine tools

and different materials for machining.

o It is not economical to stock a large variety of

cutting coolants to meet all the requirements.

o In such shops, rationalization of cutting coolants is

essential.

Thus, compatibility of the coolant with different systems

is of vital importance.

Page 13: Coolant separator

MAIN OBJECTIVE

To separate the chips and scraps assuring that 80-90 % of the

coolant is removed from it.

Page 14: Coolant separator

BASIC OBJECTIVES OF THE

PROJECT

i. To separate the coolant from the chip and scrap

solution.

ii. To dry up the chips and scraps.

iii. To reduce the machining cost.

iv. To avoid wastage of cutting and lubricating coolant.

v. To extend the life span of working fluid and tools

significantly as well as to improve processing

precision and speed.

Page 15: Coolant separator

APPLICATIONS

It founds applications for separating the coolant from

the scrap and chips of the following machine tools:-

i. Lathe machine.

ii. Shaping machine.

iii. Grinding machine.

iv. Automats.

v. Milling Machine, etc.

Generally, where chips are produced and coolant is

used for lubrication purpose.

Page 16: Coolant separator

ADVANTAGES

i. Properties of the metal to be formed is not changed

as the coolant is separated from the chips.

ii. It is economical for us to reuse the coolant again

and again.

iii. Also the scrap cost per kg of chip is reduced.

Page 17: Coolant separator

FUTURE SCOPE

Paper filter can be connected in series with the

cleaning system.

This cleaner will give the more efficiency.

The coolant collecting drum can be manufactured

from the fiber material also.

Page 18: Coolant separator