Embed Size (px)
Citation preview
SUDARSHAN ENGINEERING
COMPRESSOR PARTS■Crankshaft.■Connecting Rod.■Piston.
PRESENTATION ON…
Contact us : http://www.Sudarshanengg.Com
CRANKSHAFT■ Crankshaft manufacture begins with either a solid billet of our
own specification 722M24 or other ■ commercially available aerospace grade steels. We also
machine from free-issue forgings and castings ■ for pre-production runs. Depending upon your project
requirements a variety of heat treatments including stabilising,
■ hardening and tempering and gas nitriding can be utilised.■ Its features are Range of high quality steels, Fully
machined,Full client control ,Custom orders ,■ 100% magnaflux tested ,Dynamically balanced.
CONNECTING RODS■ Connecting rods are used in numerous situations, most
commonly in the engines of automobiles. ■ Connecting rods connect the crankshaft to the pistons and are
necessary for the proper functioning of an internal combustion engine.
■ The purpose of a connection rod is to provide fluid movement between pistons and a crankshaft.
■ Connection rods are widely used in vehicles that are powered by internal combustion engines.
■ All cars and trucks that use this type of engine employ the use of connecting rods.
PISTON■ Most car engines have four cylinders. Inside these cylinders is
where you find the pistons. The pistons move up and down inside these cylinders through fuel combustion.
■ Fuel is injected into the cylinder and then combusted, forcing the piston to go down.
■ The combustion is done at a very fast interval in all cylinders. ■ The piston is connected to a connecting rod which is then
connected to the crankshaft. The crankshaft is designed to convert the up and down motion of the pistons to a rotating motion.
■ The downward movement of one piston will force another piston to go up, thus,
■ continuing the up and down motion of pistons and then producing the rotating movement of the crankshaft.
