Upload
anang-aris-widodo
View
156
Download
7
Tags:
Embed Size (px)
DESCRIPTION
BASIC OF COMMUNICATION
Citation preview
BACIS OF COMMUNICATION
MK : TELEKOMUNIKASI-DIGITAL
ANANG ARIS WIDODO - SKI 2Magister Teknik Elektro - Universitas Brawijaya
BASIC OF COMMUNICATION
A very simple telecommunication system. The signal is sent over a transmission medium and,at the receiving end, the transducer again converts the electrical signal into data and is given to the destination (sink)
Slide 1MK : TELEKOMUNIKASI-DIGITAL
5 Basic ComponentEvery communication system has 5 basic requirements
• Data Source (where the data originates)• Transmitter (device used to transmit data)• Transmission Medium (cables or non cable)• Receiver (device used to receive data)• Destination (where the data will be placed)
Slide 2MK : TELEKOMUNIKASI-DIGITAL
5 Basic Components
Slide 3MK : TELEKOMUNIKASI-DIGITAL
PC-to-PC communication
A communication system used to interconnect two computers The serial ports of two computers can be connected directly using a copper cable.However, due to the signal attenuation, the distance cannot be more than 100 meters
MK : TELEKOMUNIKASI-DIGITALSlide 4
PC-to-PC communication over telephone network
Two computers can communicate with each other through the telephone network, using a modem at each end. The modem converts the digital signals generated by the computer into analog form for transmission over the medium at the transmitting end and the reverse at the receiving end.
MK : TELEKOMUNIKASI-DIGITALSlide 5
Generic communication system
In a radio communication system, the electrical signal is transformed into a high-frequency signal and sent over the air
MK : TELEKOMUNIKASI-DIGITALSlide 6
ILUSTRATION COMMUNICATION
Kabel logam
Sisipengirim
Sisipenerima
Media udara
Sisipengirim
Sisipenerima
Sisipengirim
Sisipenerima
Kabel optik
MK : TELEKOMUNIKASI-DIGITALSlide 7
Element Communication • Multiplexer : Combines the signals from different sources to transmit on the
channel. At the receiving end, a demultiplexer is used to separate the signals• Multiple access : When two or more users share the same channel, each user has
to transmit his signal only at a specified time or using a specific frequency band.• Error detection and correction : Detection, and if possible correction, of the errors
has to be done at the receiving end. This is done through a mechanism called channel coding
• Source Coding : the input signal has to be processed to reduce its bandwidth so that it can be accommodated on the channel.
• Switching : If a large number of users has to be provided with communication facilities, as in a telephone network, the users are to be connected based on the numbers dialed. This is done through a mechanism called switching.
• Signaling : The information sent by the subscriber/switch for call setup, disconnection, and management, such as billing
MK : TELEKOMUNIKASI-DIGITAL Slide 8
TYPES OF COMMUNICATION• Point-to-point communication• Point-to-multipoint communication• Broadcasting• Simplex communication• Half-duplex communication• Full-duplex communication
MK : TELEKOMUNIKASI-DIGITALSlide 9
TRANSMISSION IMPAIRMENTS
While the electrical signal is traversing over the medium, the signal will be impaired due to various factors. These transmission impairments can be classified into three types :
- Atenuasi distorsi- Delay Distorstion- Noise
MK : TELEKOMUNIKASI-DIGITALSlide 10
Attenuation Distortion
MK : TELEKOMUNIKASI-DIGITALSlide 11
Thermal noise
MK : TELEKOMUNIKASI-DIGITALSlide 12
Thermal noise obtained from the formula
N0 = kTwhere No is noise power density, watts per Hz
Thermal noise for a bandwidth of B Hz is given by
If N is expressed in dB (decibels)
MK : TELEKOMUNIKASI-DIGITALSlide 13
Intermodulation noise
When two signals of different frequencies are sent through the medium, due to nonlinearity of the transmitters, frequency components such as f1 + f2 and f1 – f2 are produced, which are unwanted components and need to be filtered out
MK : TELEKOMUNIKASI-DIGITALSlide 14
Crosstalk
Unwanted coupling between signal paths is known as crosstalk. In the telephone network, this coupling is quite common. As a result of this, we hear other conversations. Crosstalk needs to be eliminated by using appropriate design techniques.
MK : TELEKOMUNIKASI-DIGITALSlide 15
Impulse noiseThis is caused by external electromagnetic disturbances such as lightning. This noise is unpredictable. When the signal is traversing the medium, impulse noise may cause sudden bursts of errors. This may cause a temporary disturbance in voice communication. For data communication, appropriate methods need to be devised whereby the lost data is retransmitted.
MK : TELEKOMUNIKASI-DIGITALSlide 16
ANALOG VERSUS DIGITAL TRANSMISSION
In a digital communication system, 1s and 0s are transmitted as voltage pulses. So, even if the pulse is distorted due to noise, it is not very difficult to detect the pulses at the receiving end. Hence, digital communication is much more immune to noise as compared to analog communication.
MK : TELEKOMUNIKASI-DIGITALSlide 17
Due to advances in digital electronics, digital systems have become cheaper, as well. The advantages of digital systems are:
• More reliable transmission because only discrimination between ones and zeros is required
• Less costly implementation because of the advances in digital logic chips• Ease of combining various types of signals (voice, video, etc.).• Ease of developing secure communication systems
The advantages of digital communication are more reliable transmission, less costly implementation, ease of multiplexing different types of signals, and secure communication
MK : TELEKOMUNIKASI-DIGITALSlide 18
Questions• What are the advantages of digital communication over analog communication?• Explain the different types of communication systems.• What are the different types of transmission impairments?• What is multiplexing?• What is multiple access?• What is signaling?
MK : TELEKOMUNIKASI-DIGITALSlide 19
References
• G. Kennedy and B. Davis. Electronic Communication Systems. Tata McGraw-Hill Publishing Company Limited, 1993.
• R. Horak. Communication Systems and Networks. Wiley-Dreamtech India Pvt. Ltd., 2002.
CP : [email protected]
MK : TELEKOMUNIKASI-DIGITALSlide 20