Click here to load reader
Upload
khusro-kamaluddin
View
632
Download
14
Embed Size (px)
Citation preview
Project Report on
CADD Modeling of Bench Vice using CREO Parametric
2.0Submitted by : Kashish VermaKhusro KamaluddinKush MalhotraLalit Kumar
Vise
A vise, a common mechanical device that is used to hold a workpiece stationary, is an integral tool in many woodworking and
metalworking applications. Bench vises, in particular, attach directly to a workbench to
hold the workpiece during operations such as sawing, planing, and drilling.
Types of Vise
1. Woodworking Vise :
2. Engineer’s Vise :
3. Hand Vise :
4. Angle Vise :
5. Drill Vise :
6. Vise Grip :
7. Pin Vise :
8. Milling Vise :
And so on ……..
Parts of Vise
Modeling• The bench vise model has the following parts :• 1. Base• 2. Vise Jaw• 3. Base Plate• 4. Jaw Screw• 5. Screw Bar• 6. Bar Globes• 7. Oval Fillister • 8. Clamping Plate• 9. Set Screw 1• 10. Set Screw 2
1. Base
2. Vise Jaw
3. Base Plate
4. Jaw Screw
5. Screw Bar
6. Bar Globes
7. Clamping Plate
8. Oval Fillister
9. Set Screw 1
10. Set Screw 2
Assembly
The base was fixed in the beginning.The parts were joined to the base using the
constraints :• 1. Coincident• 2. Distance
Thank You