Upload
sudip-hor
View
164
Download
5
Tags:
Embed Size (px)
Citation preview
BRICK MASONRY
PRESENTED BY:
SUBHENDU SAMUI 12001312049 SUDIP HOR
12001312050 SUKESH DEY 12001312051 SUKHOMOY DAS 12001312052 SUMANTA BAIDDO
12001312053
OVERVIEW INTRODUCTION DEFINATION UNIQUENSS CHARACTERISTIC OF BRICK ADVANTAGE MANUFACTURNG TYPES SIZE JOINT TOOLS TECHNICAL TERMS ORIENTATION RULES BOND CLASSIFICATION TESTS OF BRICK DEFECTS CONCLUSION
INTRODUCTION Brick bonds are an essential part of wall structure. "brick" is a standard-sized weight- bearing building unit. Several bricks are laid together in stacks. Mortar paste is placed on top of each to form a firm bond. are laid to form the structure. There are different ways in which bricks are termed as bonds.
WHAT IS BRICK-MASONARY BRICK :- Brick is a building unit ,which is in
the form of rectangular block in which length to breadth ratio is 2 but height can be different.
MASONARY :-Construction of building unit bonded together with mortar.
BRICK MASONRY:-The art of laying bricks in mortar in a proper systematic manner gives homogeneous mass which can withstand forces without disintegration, called Brick masonry.
BRICK MASONRY-UNIQUENESS FIRE RESISTANCE
SIZE
DURABILITY
WORAKABILITY
ECONOMICAL
CHARACTERISTIC OF BRICKSBrick will not burn, buckle or melt.Brick will not rot and allow Termites to invade.Brick will not rust and corrode.Brick will not dent.Brick will not fade from the Sun’s UV Rays.Brick will not be damaged by high winds , rain or
hail.Brick will not require constant maintains.Brick will not devalue.Brick will not limit your personal expression.Brick will not limit your design options.
ADVANTAGES OF BRICK MASONRY The Brick masonry is cheaper than
compared to stone masonry. Bricks are of uniform size. Bricks are very workable . Brick blocks don’t need any dressing. Bricks are very light in weight. No complicated lifting devices are
necessary in brick work. There is no problem to its availability. They do not require transportation
from long distances. Brick work can be done by the less
skilled labours also. Bonding strength is very good and
brick work is more durable.
MANUFACTURING OF BRICKS
TYPES OF BRICKS MASONRY
Bricks Masonry
Brick work in mud Brick work in cement
BRICK WORK IN MUD
The mud is used to fill up the joints.
Thickness of the mortar joint is 12 mm.
CheapestMaximum height of wall is 4
m.
BRICK WORK IN CEMENT 1st Class
Cement of lime mortar is used. The surface and edges of bricks are sharp. The thickness of mortar joints doesn’t exceed
10mm 2nd Class
Ground moulded bricks are used. Bricks are rough and shape is slightly irregular. The thickness of mortar joint is 12 mm.
3rd Class Bricks are not hard ,rough surface with distorted
shape. Used for temporary structures. Used in places where rainfall is not heavy.
SIZES OF BRICK
Nominal size :-A standard metric brick has coordinating dimensions of 225 x 112.5 x 75 mm (9” x 4.5” x 3”)
Architectural size :- Working dimensions (actual dimensions)of 215 x 102.5 x 65 mm (8.5” x 4” x 2.5”)
MASONRY JOINT Weathered joint :-Mortar joint has sloped
(downwards) edge. Concave joint :-Joint concave inwards. Vee joint :-Mortar joint is the form of V. Flush joint :-Mortar joint is flush with the brick
surface. Raked joint :-A large portion of the mortar joint
is raked out not a safe ,impermeable joint. Stripped joint :- A medium large portion of the
mortar joint is a safe permeable joint. Struck joint :-Mortar joint has aslope (upwards)
edge.
TOOLS USED IN BRICK MASONRY
TrowelPlumb bobHammerSpirit levelMason
squareSteel tape
BRICK COURSES & CLOSURES QUEEN CLOSURE: A brick cut
in half down its length.KING CLOSURE : A brick cut a
corner & joining middle points of width and length of the brick.
THREE QUARTER BAT : A brick cut to three-quarters of its length, and laid with its long, narrow side exposed.
HALF BAT: A brick cut in half across its width and laid in the wall structure.
QUARTER BAT: A brick cut to a quarter of its length.
ORIENTATION OF BRICKS STRETCHER: A brick laid
with its long narrow side exposed.
HEADER: A brick laid flat with its width at the face of the wall.
SOLDIER: A brick laid vertically with the long narrow side of the brick exposed.
SAILOR: A brick laid vertically with the broad face of the brick exposed.
RULES FOR GOOD BRICK BONDING
Uniform in size.Bricks arranged uniformly throughout the
wall.Bats are used as little as possible.The bricks in the interiors of wall laid as
headers, that is, across the wall.The lap not more than 2 and one-fourth(1/4)
inches.The vertical joints in every other course
should be vertically over one another.
BONDS IN BRICK-WORK1. English bond.2. Flemish bond.3. Header bond.4. Stretcher bond.5. Facing bond.6. English cross bond.7. Brick on edge bond.8. Dutch bond.9. Raking bond.10. Garden wall bond
FLEMISH-BONDThis bond has one stretcher
between headers, with the headers centered over the stretchers in the course below.
When a course begins with a stretcher, the course will ordinarily terminate with a stretcher at the other end.
Brickwork that appears as Flemish bond from both the front and rear is Double Flemish bond.
ENGLISH BOND Bricks are laid in alternate
courses of headers and stretchers.
There is a chance of penetration of damp through transverse joints.
Queen closures are inserted next to headers to produce overlap.
English bonds are the strongest but it is to be noted that the continuous vertical joints are to be avoided.
Appearance is not as good as Flemish bonds.
SUSSEX BONDThis bond has three
stretchers between every header.
the headers are centered above the midpoint of three stretchers in the course below.
Generally used as garden walls and are relatively cheaper than other bonds.
GARDEN-WALL BOND Used for 9 inch wall. Used when a fair face is
required on both sides. Wall is composed of three
or four courses of stretchers alternating with one of headers.
It is mostly used in construction of garden wall.
HEADER BOND
Heading or Header Bond is laid on headers.
Used for round quick sweeps . Should never be used in
straight work as it is very week.
This bond is used for facing of curved surface and footings in foundations.
STRETCHER BOND Bricks are laid in stretchers. Used in walls of half – brick in thickness. Due to its constant occurrence in the last position
it is also called Chimney Bond, Running Bond. This bond doesn’t develop proper internal bond.
QUALITIES OF GOOD BRICKS1. Bricks should be uniform in shape & standard in size.2. Bricks should give a clear metallic ringing sound when
struck with each other.3. Bricks should show a bright homogeneous & free from voids.4. Bricks should be well brunt and possess sharp edges.5. Colour of the bricks should be uniform and bright.6. Bricks should be sufficiently hard & no impression should be
left on bricks surface when scratched with finger nail.7. Bricks should have crushing strength above 5.50N/mm”.8. The bricks should not break when it dropped from a height
of about 1 m.9. The bricks should not absorb water more than 20% by
weight when soaked in cold water for 24 hrs.10. The bricks should not show any deposits of white salts when
allowed to dry in shade.
CLASSIFICATION OF BRICKS FIRST CLASS BRICKS :-
This are table moulded. Surface & edges are sharp, square ,smooth , straight. Well brunt & have uniform texture ,metallic ringing when
struck against each other. Used for superior work.
SECOND CLASS BRICKS :- This are ground moulded brick. Surface are rough. The quality of this bricks are inferior.
THIRD CLASS BRICKS :- The surface & edges are rough. Does not create any metallic sound. Used for temporary & unimportant structure.
FOURTH CLASS BRICKS :- This bricks are over brunt. Irregular shape & dark colour. Used in floor , foundation, roads.
TESTS FOR BRICKS1) Absorption:- The brick should not absorb water more
than 20% of dry weight.2) Crushing strength:- As per BIS 1077-1957 the
minimum crushing strength of bricks is 3.5 N/mm2
3) Hardness :- Brick is treated to be sufficient hard if no impression could be made on the surface of the brick by finger nail.
4) Soundness :- Two bricks when struck with each other should emit metallic ringing sound.
5) Structure :- It should be homogeneous ,compact ,and free from any defects.
6) Shape & size :- Standard size (190 X 90 X 90 mm) and shapes should be truly rectangular with sharp edges and smooth surface.
DEFECTS IN BRICK MASONRYSulphate attack :- Sulphate salts present in
bricks work react with alumina content of cement .It occur in boundary walls.
Crystallization of salts from bricks :- Occur in masonry made out of brick which contain excessive soluble salts.This phenomenon is also known as efflorescence.
Corrosion of embedded iron or steel :- Iron or steel embedded in brick work gets corroded in the presence of dampness .On corrosion the metal expands in volume and tends to crack the brick work.
CONCLUSIONMasonry boasts an
impressive compressive strength (vertical loads) but is much lower in tensile strength unless reinforced.
Brick masonry increases the thermal mass of a building and thereby resists fire.
Masonry tends to be heavy and must be built upon a strong foundation, such as reinforced concrete, to avoid settling and cracking.
THANK YOU !!