36
Boring Machines Presented by SALUNKE M.D. Presented to B.I.T.BARSHI

Boring machine ppt

Embed Size (px)

Citation preview

Page 1: Boring machine ppt

Boring Machines

Presented by SALUNKE M.D.

Presented to B.I.T.BARSHI

Page 2: Boring machine ppt

Boring Machine

Boring machine is used to bore holes in large & heavy parts such as engine frame ,steam engine cylinders ,machine housing etc. which are practicaly impossible to hold and rotate in an engine lathe or drilling machine .

By using simple attachments boring machine can be used for screw cutting ,turning ,planetary grinding , gear cutting .

Page 3: Boring machine ppt

Boring • Difference between boring and turning:

– Boring is an operation of enlarging inside diameter of an existing hole

(inside operation)– Turning is an operation of reducing outside diameter of

a cylinder (outside operation) – In effect, boring is internal turning operation

• Types of Boring machines – Horizontal: The rotational axis of w/p is horizontal – Vertical - The rotational axis of w/p is vertical

Page 4: Boring machine ppt

Boring

Boring is a process of producing circular internal profiles on a hole made by drilling or another process. It uses single point cutting tool called a boring bar. In boring, the boring bar can be rotated, or the workpart can be rotated. Machine tools which rotate the boring bar against a stationary workpiece are called boring machines (also boring mills).

Boring can be accomplished on a turning machine with a stationary boring bar positioned in the tool post and rotating workpiece held in the lathe chuck as illustrated in the figure. In this section, we will consider only boring on boring machine.

Page 5: Boring machine ppt

Boring

Page 6: Boring machine ppt
Page 7: Boring machine ppt

Classification of boring machine

Page 8: Boring machine ppt

Boring Machine

Boring machines can be horizontal or vertical according to the orientation of the axis of rotation of the machine spindle

Page 9: Boring machine ppt

Boring Machine

Page 10: Boring machine ppt

Horizontal Boring Machine

Page 11: Boring machine ppt
Page 12: Boring machine ppt
Page 13: Boring machine ppt
Page 14: Boring machine ppt

Parts OF Horizontal Boring Machine

• BED• Headstock supporting coloum• End supporting coluum• Headstock• Saddle • Boring Bar

Page 15: Boring machine ppt

Horizontal Boring MachineWork stationary on table (workpies may be

heavy , bulky or unsymmetrical ,irregular )Tools revolves in horizontal axisBoring ,reaming ,turning ,threading ,facing ,mil

ling ,grooving operations can be done with suitable tools.

Page 16: Boring machine ppt

Horizontal Boring Machine

In horizontal boring operation, boring bar is mounted in a tool slide, which position is adjusted relative to the spindle face plate to machine different diameters. The boring bar must be supported on the other end when boring long and small-diameter holes

Page 17: Boring machine ppt

.

Horizontal Boring Mill

Fig. Horizontal boring m/c

- Used when Length of part is larger than its diameter; and the weight is low

Page 18: Boring machine ppt

Horizontal Boring Mill

Page 19: Boring machine ppt

VERTICAL BORING MACHINE

A vertical boring mill is used for large, heavy workparts with diameters up to 12 m. The typical boring mill can position and feed several cutting tools simultaneously. The workpart may be mounted on a rotating worktable.

Page 20: Boring machine ppt
Page 21: Boring machine ppt

A vertical lathe or boring m/c

Vertical Boring Mill

- Used when Length of part is smaller than its Diameter; and the part is heavy

A boring bar made of cemented carbide

Page 22: Boring machine ppt

Vertical Boring Mill

Page 23: Boring machine ppt

Vertical Boring Mill

Page 24: Boring machine ppt

VERTICAL BORING MACHINE

Typical applications - • Line boring of large machine tool casings and engine blocks.• Machining internal bearing diameters in large castings.• Finish machining of cylindrical surfaces on very large work pieces

Page 25: Boring machine ppt

Parts OF Vertical Boring Machine

• BED• Table• Housing• Crossrail • Tool-head assembly

Page 26: Boring machine ppt

JIG BORING MACHINE

Page 27: Boring machine ppt

Jig

Page 28: Boring machine ppt

JIG BORING MACHINE

Page 29: Boring machine ppt

JIG BORING MACHINE

• Most accurate of all machine tool• Jig boring machines used for production of

jig ,fixtures,tools, and other precision parts which requires high degree of accuracy.

• Jig boring machines resembles in appearance to a vertical milling machines but both they are different.

Page 30: Boring machine ppt

JIG BORING MACHINE

• Spindle & other parts are extremly rigid to resist deflection & vibration

• Spindle run in preloaded antifriction bearings.• Jig boring machines reguired to be operated in

temperature controlled room where temp. maintained constant.

Page 31: Boring machine ppt

Cutting tool for boring (boring bar )

The typical boring bar is shown in the figure. When boring with a rotating tool, size is controlled by changing the radial position of the tool slide, which hold the boring bar, with respect to the spindle axis of rotation. For finishing machining, the boring bar is additionally mounted in an adjustable boring head for more precise control of the bar radial position.

Page 32: Boring machine ppt

BORING HEAD OR CUTTER HEAD

Page 33: Boring machine ppt

Boring Bar

Page 34: Boring machine ppt

BORING HEAD OR CUTTER HEAD

• Boring heads are used for mounting cutters while machining large diameter holes where a standard boring bar is unsuitable due to smaller diameter or overhanging of cutter.

• Two or more cutters held on boring head• boring head supports tool & reduce machine

time due to larger numbers of cutting edges.

Page 35: Boring machine ppt
Page 36: Boring machine ppt