Agenda, Day 1, 28th April 2015Zeit /time

Opening of the conference10:00 am Opening

Prof. Dr. Martin Winter / Prof. Dr. Dirk Uwe Sauer

Greetings10:10 am Prof. Dr. Werner Klaffke, Haus der Technik

Plenary Talks10:30 am Introduction for the conference

Prof. Dr. Dirk Uwe Sauer

10:40 am Physics-based modeling applied to Li-ion batteriesCharles DelacourtUniversity of Picardie

11:05 am Advanced lithium ion batteries: from materials research to complete cellsDr. Margret Wohlfahrt-MehrensZentrum für Sonnenenergie- und Wasserstoff-Forschung Baden-Württemberg (ZSW)

11:30 am Advanced Battery Technology for EV/PHEV applicationsMasanori KitamuraGS Yuasa Corporation, Japan

Lunch Break with poster session and exhibition11:55 am Poster session and exhibition

12:45 pm Lunch Break

Plenary SessionLivestream of the Joint Session with i-WING 2015 Conference

1:45 pm Room: Europa-SaalSession chair: Prof. Dr. Dirk Uwe Sauer

Opening i-Wing 2015 ConferenceDr. Joachim P. Kloock, Bundesministerium für Bildung und ForschungDresden

1:50 pm Lithium-Ion and Post-Lithium-Ion-Battery Technologies: Opportunities, Challenges, Wishful ThinkingProf. Dr. Martin Winter, Westfälische Wilhelms-Universität MünsterAachen

2:15 pm Integrated Approach of a material manufacturerDr. Andreas Fischer. BASF SEDresden

2:40 pm Requirements for Batteries used in Electric VehiclesDr. Peter Lamp, BMW AGDresden

3:05 pm Entwicklung des BatteriemarktesDr. Wolfgang Bernhart, Roland Berger Strategy Consultants GmbHAachen

Break with poster session and exhibition3:30 pm Break with poster session and exhibition

Livestream of the Joint Session with i-WING 2015 Conference (continued)until 6:00 pm

4:15 pm Room: Konferenzraum K2Session Chair: Dr. Jenna Wies, Projektträger Jülich

Parallel Session 14:30 pm Room: Saal Brüssel

Parallel session 1AApplication I - Automotive 14V/48V VehiclePower Supply SystemsSession Chair: Andreas Störmer (BMW) undEberhard Meissner (JCI)

Room: Europa-SaalParallel session 1BLithium-Ion Cells I - MaterialsSession Chair: Gerhard Hörpel (MEET) und PeterPilgram (Audi)

Room: Konferenzraum K1Parallel session 1CBattery Systems I - ModelingSession Chair: Andreas Jossen (TU München)und Horst Mettlach (Opel)

Water Consumption of Gen-2 Enhanced FloodedBatteries in Micro-Hybrid VehiclesAuthor: Eckhard Karden, Ford Research &Advanced Engineering Europe

Mechanical Properties of Electrodes for lithium-Ion-Batteries - Analysis and ModellingAuthor: Rabea Grisat, Technische UniversitätBraunschweig

Mathematical Modelling Of Li-Ion Batteries ByEquivalent Circuits Using The Current InterruptionTechniqueAuthor: Andreas Melcher, Karlsruher Institut fürTechnologie

Availability Model for Start-Stop OperationAuthor: Jörn Albers, Johnson Controls PowerSolutions

Design and modification of lithium salts: Effects onelectrochemical stability, conductivity and cyclingbehaviorAuthor: Mariano Grünebaum, University of Muenster

Thermal-electrical modeling of batteries forimproving cooling design and E-powertrainperformanceAuthor: Michael Clauss, IAV GmbH

www.battery-power.eu

BATTERY CONFERENCE 2015

Quick determination procedure to quantify the acidstratification tendency and its influence on lifetime offlooded lead-acid batteriesAuthor: Dominik Schulte, BatterieIngenieure GmbH

Layered Li-rich nickel manganese oxides for highenergy lithium ion batteriesAuthor: David PERALTA, Commissariat à l'énergieAtomique et aux Energies Alternatives (CEA-LITEN)

Spatially resolved electrical-thermal lithium-ionbattery pack simulation for real-time application inelectric vehiclesAuthor: Heiko Witzenhausen, RWTH Aachen

Water loss in modern lead acid batteries – Linkingelectrocatalytical activity of carbon additives withgassing rates of lead acid batteriesAuthor: Jochen Settelein, Fraunhofer Insitute forSilicate Research ISC

Redox Active vs. Redox Inactive ConductivePolymers as Binders in Cathodes for Li-Ion BatteriesAuthor: Lidiya Komsiyska, NEXT ENERGY • EWEResearch Centre for Energy Technology

Multi-Dimensional Modelling of Lithium-Ion CellPhysics and its Validation by Local PotentialMeasurementAuthor: Simon Erhard, Technische UniversitätMünchen

Evidence for reorganising and enhancing oflead-acid NAM by finely dispersed electrically-connected carbonAuthor: John Abrahamson, ArcActive Ltd.

Intermitted coating and printing technologies for highperformance battery electrodesAuthor: Christian Werner, KROENERT GmbH & CoKG

Sensitivity analysis of an electrochemical model ofLi-ion batteries and consequences on the modeledaging mechanismsAuthor: Clément Edouard, IFP Energies nouvelles

End of first day6:15 pm End of first day

Evening Reception7:30 pm Evening reception at SuperC, RWTH Aachen

Agenda, Day 2, 29th April 2015Zeit /time

Parallel Session 29:00 am Room: Saal Brüssel

Parallel session 2AApplication II - Stationary Battery SystemsSession Chair: Jochen Seier (FZ Jülich) undFrank Köster (EnergieRegion.NRW)

Room: Europa-SaalParallel session 2BLithium-Ion Cells II - Theory and FundamentalsSession Chair: Stefano Passerini (HIU) undJürgen Janek (Uni Gießen)

Room: Konferenzraum K1Parallel session 2CBattery Systems II -Diagnostic and ManagementSession Chair: Thomas Hülshorst (FEV) undArmin Warm (Ford)

Funding of Energy Storage Technology: The 6thEnergy Research ProgrammeAuthor: Melanie Schroeder, Projektträger Jülich,Forschungszentrum Jülich

Enhanced self-discharge determination via simplepulse testsAuthor: Jan Philipp Schmidt, Karlsruher Institut fürTechnologie

Development of a BMS with In-Situ ImpedanceMeasurement for Cell Individual State-of-ChargeEstimation in a Battery PackAuthor: Hannes Rathmann, Fachhochschule Kiel

When is a battery starting to operateenvironmentally positive?Author: Karl-Heinz Pettinger, Hochschule Landshut

Spatial Resolved Post Mortem Analysis onCylindrical Lithium-Iron-Phosphate Cells Aged witha Current Rate of 2CAuthor: Meinert Lewerenz, Institut fürStromrichtertechnik und Elektrische Antriebe

Sensorless Battery Internal Temperature Estimationusing a Kalman Filter with Impedance MeasurementAuthor: Robert Richardson, University of Oxford

Large scale Li-ion battery systems for primarycontrolAuthor: Jens Kistner, ads-tec GmbH

Modeling the porous solid electrolyte interphaseAuthor: Birger Horstmann, German AerospaceCenter

Battery Management System - Concepts to reduceBattery specific costsAuthor: Olivier Cois, Robert Bosch Battery SystemsGmbH

Model-based degradation assessment of lithium-ionbatteries in a smart microgridAuthor: Wolfgang Bessler, Offenburg University ofApplied Sciences

How computers can help to find better electrolytematerialsAuthor: Martin Korth, Ulm University

Improve Battery Performance by optimal ThermalDesignAuthor: Justin Kolbe, The Bergquist CompanyGmbH

Grid integration of E-Mobility - Controlled ChargingV3.0 - Part 1Author: Xaver Pfab, BMW AG

Structuring of C/Si composite materials for lithiumion battery anodesAuthor: Karina Mees, Universität Bayreuth

Cooling strategies comparative for large size pouchcellsAuthor: Gorka Vertiz, Ik4-Cidetec

Grid integration of E-Mobility - Controlled ChargingV3.0 - Part 2Author: Michael Westerburg, EWE AG

Break with poster session and exhibition10:45 am Break with poster session and exhibition

Lunch Break12:00 pm Lunch Break

Parallel Session 31:00 pm Room: Saal Brüssel

Parallel session 3ABattery Production II - CellsSession Chair: Arno Kwade (TU Braunschweig)

Room: Europa-SaalParallel session 3BLithium-Ion Cells III - Calendar and Cycle LifeSession Chair: Jens Tübke (Fraunhofer ICT) undMatthias Ullrich (VW)

Room: Konferenzraum K1Parallel session 3CBeyond and beside Lithium-Ion TechnologySession Chair: Andrea Balducci (HIU) undKristina Edström (Uppsala University)

Water based electrode processing in Li-ion batteryproductionAuthor: Alice Hoffmann, ZSW (Zentrum fürSonnenenergie- und Wasserstoff-Forschung Baden-Württemberg

Investigation on Local State of Charge Distributionsin Commercial Cells by Local PotentialMeasurementsAuthor: Patrick Osswald, TUM Create

Lithium‐sulfur-batteries: Cathode design forenhanced capacity and cycle lifeAuthor: Holger Althues, Fraunhofer IWS

Identification of morphology-critical stages duringdrying of particulate electrode slurriesAuthor: Stefan Jaiser, Karlsruhe Institute ofTechnology

Experimental Investigation of Lithium-Plating inLithium-Ion BatteriesAuthor: Izaro Laresgoiti, RWTH- Aachen, ISEA

Gas Diffusion Electrodes for Li/O2 Batteries: Impactof Porosity, Wettabiliy and Electrode DesignAuthor: Anne Westphal, Fraunhofer Institute forManufacturing Technology and Advanced MaterialsIFAM

Optimization of kneading recipe for preparation ofslurry of LIBsAuthor: Ningxin Zhang, Austrian Institute ofTechnology

Effects of ionic diffusion rates on aging in lithium-ion-batteriesAuthor: Felix Gottschalk, VolkswagenAktiengesellschaft

Novel Screen Printed Air Cathodes for Metal-AirBatteriesAuthor: Andreas Flegler, Fraunhofer Institut fürSilicatforschung (ISC)

PE-03 High throughput production of 100% siliconanodes by thermal plasma deposition technologyAuthor: Roel Bosch, Roth & Rau B.V.

Following In Situ Spatiotemporal Changes of SEIPropertiesAuthor: Heinz Bülter, Carl von Ossietzky UniversitätOldenburg

High rate capability Li3V2-xNix(PO4)3/C (x = 0,0.05, 0.1) cathodes for Li-ion asymmetricsupercapacitorsAuthor: Secchiaroli Marco, ZSW-Zentrum fürSonnenenergie- und Wasserstoff-Forschung

Technological development of lithium-ion-batteryuntil 2030 - A potential estimation using the exampleof electric mobilityAuthor: Heiner Heimes, PEM der RWTH Aachen

How much influence has the separator compositionon the ageing behaviour of the electrolyte inlithium-ion cells? – An experimental investigationAuthor: Yvonne Krämer, Deutsche ACCUmotiveGmbH & Co. KG

All solid state Li battery using garnet structureTa-substituted Li7La3Zr2O12 as solid electrolyteAuthor: Chih-Long Tsai, Forschungszentrum JuelichGmbH

Break with poster session and exhibition2:45 pm Break with poster session and exhibition

Parallel Session 43:15 pm Room: Saal Brüssel

Parallel session 4ABattery Production II - CellsSession Chair: Christoph Deutskens (RWTHAachen) und Arne Fischer (BOSCH)

Room: Europa-SaalParallelsession 4BLithium-Ion Cells IV - Aging and SafetySession Chair: Peter Novák (ETH Zürich) undHelena Berg (AB Libergreen)

Room: Konferenzraum K1Parallel session 4CBattery Systems III - Improved PerformanceSession Chair: Peter Notten (EinhovenUniversity) und Volker Hennige (AVL)

Inline Testing for Battery Production using Imagingbased and electrical Measurement Procedures.Author: Michael Roscher, ThyssenKrupp SystemEngineering GmbH

Adiabatic Heat-Wait Search Experiments onCommercial 18650 type lithium-ion cellsAuthor: Jan Peter Haetge, University of Münster,

Improved Battery Performance by Model-BasedSystems EngineeringAuthor: Andreas Braun, AVL List GmbH

Design concept for hard‐case battery cells withseparated electrode chambersAuthor: Thomas Feustel, Technische UniversitätDresden

Analysis of aging mechanisms on the surface ofLiNi0.5Co0.2Mn0.3O2 cathodes in commercial18650 lithium-ion batteriesAuthor: Markus Börner, University of Münster

Influence of Cell Size on Performance of Lithium IonBatteryAuthor: Raghavendra Arunachala, TUM CREATELtd

Technology development for environmental friendlyand energy efficient manufacturing of lithium ionbatteriesAuthor: Mareike Wolter, Fraunhofer-Institut fürKeramische Technologien und Systeme IKTS

Interaction of ageing and safety of Li-ion batteriesAuthor: Meike Fleischhammer, ZSW Ulm

Nonlinear parameter estimation for equivalent circuitmodels of Lithium-ion batteries depending ontemperature and SOCAuthor: Magdalena Gottfried, Duale HochschuleBaden-Württemberg Mannheim

Monetary influence of manufacturing errors in theproduction of Lithium-Ion Batteries (LIB)Author: Robert Schröder, Technische UniversitätBerlin, Institut für Werkzeugmaschinen undFabrikbetrieb (IWF)

Hazard Potential of Lithium-ion Batteries and itsQuantification via Gas AnalysisAuthor: Jan Diekmann, TU Braunschweig

Reliability of eBike batteries: State-of-the-art andstandardsAuthor: Vikram Godbole, Robert Bosch GmbH

Integrated Product and Assembly ProcessDevelopment for Battery SystemsAuthor: Alexander Tornow, Institut fürWerkzeugmaschinen und Fertigungstechnik, TUBraunschweig

Comparison of abuse tests on different cellchemistries and simulation of short circuit tests oncell and module levelAuthor: Johannes Brey, TÜV SÜD Battery TestingGmbH

End of conference

Visit of ISEA5:30 pm Visit of ISEA

Poster SessionApril 2014, 28-29, all day

PA Automotive and mobile applicationsPA-01 Internal failure detection of lead-acid batteries in micro-hybrid applicationsAuthor: Grzegorz Pilatowicz, ISEA, RWTH Aachen

PA-02 Benchmark test standard for Li-ion cellsAuthor: Dominik Schulte, P3 Energy & Storage GmbH

PA-03 Integrating different battery technologies for electric mobilityAuthor: Andreas Gronarz, Forsee Power SAS

PA-04 Lithium-Titanate Cells for Fast Charging Battery Buses? Results of a Performance and Aging AnalysisAuthor: Matthias Rogge, ISEA RWTH Aachen University

PA-05 Development of Lead Acid Battery for Applications with Idling Stop-Start SystemsAuthor: Masatoshi Tozuka, Hitachi Chemical Co.,Ltd.

PA-06 Multi-scale simulation and validation of volumetric changes of lithium-ion cellsAuthor: Bernhard Rieger, TU München

PA-07 Development of a fast-charging battery pack specifically designed for taxi operationAuthor: Christian Huber, Technische Universität München

PA-08 SuperLIB: High-Energy/High-Power Cell Combination Architecture with a Smart BMS? Overview, Advantages and ResultsAuthor: Can Kurtulus, AVL LIST GmbH

PA-09 Ambient thermal aspects of choosing li-ion chemistry for trunk-mounted automotive low voltage support batteryAuthor: Luis Guerrero, Volvo Cars

PA-10 Energy Management Strategies for a Hybrid Battery System for Electric VehiclesAuthor: Raphael Wegmann, Robert Bosch GmbH

PA-11 Aging of Traction Batteries in Vehicle-to-Grid Applications II: Light Commercial Vehicles Used for Home Delivery ServicesAuthor: Marius Bauer, ZSW Baden Württemberg

PA-12 Aging of Traction Batteries in Vehicle-to-Grid Applications I: Passenger Cars Used for CommutingAuthor: Clemens Günther, Zentrum für Sonnenenergie- und Wasserstoff-Forschung Baden-Württemberg (ZSW)

PA-13 Transport, Diagnosis und Recovery of crash-involved Batteries with focus on MaterialsAuthor: Steffen Krüger, P3-Group

PA-14 Modeling Dynamic Charge Acceptance of Lead-Acid Batteries for Micro-Hybrid Vehicles with Focus on Influence of Previous Discharge RateAuthor: Jan Kabzinski, ISEA, RWTH Aachen University

PA-15 Comparison of the dynamic charge acceptance of different Starting-Lightning-Ignition Batteries during standardized driving cyclesAuthor: Daniel Renner, AUDI AG

PA-18 An Integrated and Generic Energy Management for hybrid and Electrical VehiclesAuthor: Nsombo Nlandi, RWTH-Aachen

PA-20 Simulative analysation of the influence of active battery heating on efficiency and loading timeAuthor: Florian Götz, Fraunhofer ICT

PA-21 A Comparison of Different Types of Lead Acid Starter Batteries under the aspect of short-term and long-term Charge AcceptanceAuthor: Philipp Schröer, Institute for Power Electronics and Electrical Drives (ISEA), RWTH Aachen

PA-22 Test and Evaluation of Practical and Economic Viability of the Operation of Electric Vehicles in Commercially Operated FleetsAuthor: Fabian Rücker, Institute for Power Generation and Storage Systems within E.ON Energy Research Center, RWTH Aachen University

PA-23 Impact of Li-Ion battery models on the dynamical behavior of an electric vehicle drive systemAuthor: Ahmad Rahmoun, Unversity of Applied Sciences Kempten

PA-25 Enhanced Lead Acid Batteries for 12V Start & Stop and 48V Micro Hybrid ApplicationsAuthor: Muhsin Mazman, Mutlu Akü ve Malz. San. A.Ş.

PA-26 The influence of different parameterization sequences to parameter set quality of an equivalent circuit lithium-ion battery modelAuthor: Edgar Schwiederik, IAV GmbH

PA-27 Automated calibration of automotive battery management system (BMS) for reproducible and accelerated prototypingAuthor: René Kirsch, IAV GmbH

PB Battery systemsPB-01 Temperature control of Lithium-ion batteriesAuthor: Daniel Werner, Karlsruher Institut für Technologie

PB-02 Comparison of cooling concepts for Li-ion cells based on 3D electrothermal FEM-modelingAuthor: André Loges, Karlsruher Institut für Technologie (KIT)

PB-04 Cost optimized battery-management-system architecture - focus on module controllerAuthor: Norbert Ferstl, AVL Software and Functions GmbH

PB-05 Continious monitoring of acid concentration in lead acid batteriesAuthor: Hans-Joachim Kohnke, Gaskatel GmbH

PB-06 On-line Parameterization of the Open Circuit Voltage Curve of a LiFePO4 Battery for SoH EstimationAuthor: Andrea Marongiu, RWTH Aachen University

PB-07 Relative ageing recognition on Li-ion-cells via Support Vector MachineAuthor: Patrick Jansen, Audi Electronics Venture GmbH

PB-08 Investigation on battery balancing circuits and their potential influence on the aging of mismatched cell stringsAuthor: Manuel Brühl, RWTH Aachen University, University of Luxemburg

PB-09 Analysis of production defects using a physico-chemical model for lithium-ion batteriesAuthor: Johannes Schmalstieg, RWTH Aachen University

PB-11 Accelerated Development and Test of BMS Using an Emulation Based HILAuthor: Dominik Schledde, Fraunhofer IWES

PB-13 Optimal energy management for xEVs while considering battery microstructural aging informationAuthor: Shi Li, RWTH Aachen University

PB-15 Selection of Prospective Cells for a Traction Battery Using a Power-HIL Setup and a Single Battery Cell PrototypeAuthor: Andrey Popov, Scienlab electronic sysytems GmbH

PB-16 Novel Ionic Liquid based Electrolyte System for an Application in Dual-Ion Cell TechnologyAuthor: Kolja Beltrop, MEET, Batterieforschungszentrum Münster

PB-17 Thermal runaway of commercial 18650 Li-ion batteries with NCA cathodes, impact of SOC and overchargeAuthor: Andrey Golubkov, VIRTUAL VEHICLE Research Center

PB-19 In-Situ Electrochemical Impedance Spectroscopy with Wireless Synchronised Battery Cell SensorsAuthor: Valentin Roscher, Hochschule für Angewandte Wissenschaften Hamburg

PB-21 Nail penetration experiments in adiabatic conditions on commercial lithium-ion cellsAuthor: Stephan Hildebrand, MEET Battery Research Center, Münster

PB-22 Reverse Engineering - Calculation of cost-, capacity- and energy for Li-Ion-BatteriesAuthor: markus hackmann, P3 Group

PB-23 Battery ageing behavior for a diesel-electric hybrid distribution truckAuthor: Renaud REVEL, IFP Energies nouvelles

PB-24 Identification of impedance models from time domain dataAuthor: Christoph Birkl, University of Oxford

PB-25 Testing lead acid batteries for stationary energy storage in grid-connected photovoltaic systemsAuthor: Manuela Schmid, Universität Bayreuth

PB-26 Current distribution and local potentials of a modified commercial battery test-cellAuthor: Joern Wilhelm, Technische Universität München

PB-27 Aging of Li-ion Batteries in Electric Vehicles: Impact of Regenerative BrakingAuthor: Peter Keil, Technische Universität München

PB-28 Analysis of differences in dynamic behaviour of available Lead-Acid Battery Technologies used in Micro-Hybrid Applications for potential Technology DetectionAuthor: Monika Kwiecien, RWTH Aachen, Institut für Stromrichtertechnik und Elektrische Antriebe

PB-29 Optimization of automotive battery pack design by parameter study with thermal simulationsAuthor: Pouyan Shafiei Sabet, Institut für Stromrichtertechnik und Elektrische Antriebe der RWTH Aachen

PB-30 Validation of DEKF and ITCM capacity estimation techniques in 6S2P battery module configurationAuthor: Mikel Oyarbide, IK4-CIDETEC

PB-31 Improved Diagnostics of the LIB-Cell Safety Parameters during Abuse TestsAuthor: Detlef Hoffmann, SGS Germany GmbH

PB-32 Adjusted Thermal Management System sizing of an Electric Vehicle Battery Pack by a Cost Effective Heat Generation ModelAuthor: Leire Martin , Ik4-Ikerlan

PB-33 Investigation of the aging of Li-ion cells' electrodes with incremental capacity curvesAuthor: Tobias Clemens Bach, Fraunhofer-Institut für Silicatforschung ISC

PB-34 Field based electrochemical battery simulation under external induced thermal gradients.Author: Lucas Kostetzer, CADFEM GmbH

PB-35 Vanadium redox flow battery - optimization of electrolyte preparationAuthor: Jan Dundalek, Institute of Chemical Technology Prague

PB-37 Design and Dimensioning of Modular, Hybrid Battery Systems for Automotive ApplicationsAuthor: Jan Becker, RWTH Aachen

PB-38 A rule-based Operating Strategy for Hybrid Battery Storage Systems in Electric VehiclesAuthor: Thomas Nemeth, RWTH Aachen

PB-39 Temperature dependent determination and modeling of the open circuit voltage of Li-ion batteriesAuthor: André Loges, Karlsruher Institut für Technologie (KIT)

PB-40 Best combination of battery models and measurement techniques to use in electric mobility and stationary storageAuthor: Uwe Westerhoff, Technische Universität Braunschweig

PC Beyond and beside lithium-ion technologyPC-01 Envites Energy: Large Format Batteries- no hazard even when a Thermal Runaway occurs!Author: Tim Schäfer , Envites Energy GmbH

PC-02 Mn and Co co-substituted Fe3O4 nanoparticles on nitrogen-doped reduced graphene oxide for oxygen electrocatalysis in alkaline solutionAuthor: Yi Zhan, National University of Singapore

PC-03 High Surface Area Carbons for SupercapacitorsAuthor: Ruben Heimböckel, Institut für Anorganische und Angewandte Chemie, Universität Hamburg

PC-04 Design and optimization of an Asymmetric Supercapacitor based on Activated Carbon and Li4Ti5O12Author: Emanuele Gucciardi, Zentrum für Sonnenenergie- und Wasserstoff-Forschung Baden-Württemberg

PC-05 Post-Mortem study of electrode ageing in supercapacitorsAuthor: Moritz Teuber, RWTH Aachen University

PC-06 Bifunctional, Carbon-Free and Co3O4 Modified Silver and Nickel Electrodes for Lithium-Air BatteriesAuthor: Dennis Wittmaier, Deutsches Zentrum für Luft- und Raumfahrt

PC-07 Introduction of a flow battery management system (FBMS)Author: Sebastian König, Karlsruhe Institute of Technology (KIT)

PC-08 Dynamic Modeling of Reaction Mechanisms in Na/O2 and Li/O2 CellsAuthor: Daniel Grübl, Offenburg University of Applied Sciences

PC-09 Microstructure Modification of Carbon Black for Lithium-Air Battery ApplicationAuthor: Kang-Seop Yun, Sejong University

PC-10 Research on electrocatalytic centers in gas diffusion electrodes by SECMAuthor: Patrick Schwager, Fraunhofer Institute for Manufacturing Technology and Advanced Materials IFAM

PC-11 Structural and Performance Characteristics of various Current Collectors for Zinc Anodes in secondary Zinc Air BatteriesAuthor: Paul Titscher, Institut für Partikeltechnik, TU Braunschweig

PC-13 Gold-coated carbon electrodes for aprotic Li-O2 batteriesAuthor: Mario Marinaro, Zentrum für Sonnenenergie- und Wasserstoff-Forschung Baden-Württemberg

PC-14 The Effect of Lithium Salt in the Electrolyte of Lithium Air BatteriesAuthor: Merve Iliksu, RWTH Aachen University

PC-15 RuO2 Nanoparticle Catalyst for Li-O2 Battery: Implications on the role of catalystAuthor: Eda YILMAZ, Bilkent University

PC-16 Possible combinations of ceramic and polymer electrolytes for the use in lithium batteriesAuthor: Christine Brinkmann, Fraunhofer Institute for Silicate Research ISC

PC-18 PEO based Block Copolymer Electrolytes for Solid-State Lithium-Ion BatteriesAuthor: Alexandru Vlad, Universite Catholique de Louvain

PC-19 Challenges of Lithium-Sulfur Batteries and Their Performance ModelingAuthor: Vaclav Knap, Aalborg University

PC-21 Synthesis and electrochemical performance of NaxNi0.5Mn0.5O2 cathode materials (0.5 ≤x ≤ 1.2) for sodium ion batteriesAuthor: Tim Risthaus, WWU Münster

PC-22 Investigation of IrO2 as an oxygen evolution catalyst for aprotic Li-O2 batteriesAuthor: Ute Riek, Zentrum für Sonnenenergie- und Wasserstoff-Forschung Baden-Württemberg

PC-23 A Novel Lithium-Sulphur Battery Model for Automotive and Renewable Energy ApplicationsAuthor: Murat Ceylan, GYTE / Gebze Institute of Technology

PC-24 12V Lead-Acid and Lithium-ion Dual-Battery ModelAuthor: Brian Sisk, Johnson Controls Power Solution

PD Lithium ion cells: materials and improvements on propertiesPD-01 Gel polymer electrolytes based on polyurethaneAuthor: Jan Vogel, Universität Hamburg

PD-02 A coupled thermal and electrical cell model of large format lithium ion cell for electric vehicle applicationAuthor: Makinejad Kamyar, TUM CREATE

PD-03 Inhomogeneous Aging Effects during Low-Temperature-Cycling of Graphite Anodes in Lithium Ion CellsAuthor: Daniel Burow, Volkswagen AG

PD-04 Towards lithium iron phosphate/carbon core/shell particles for the use as cathode material in secondary lithium iron batteriesAuthor: Julia Ziegler, Universität Hamburg

PD-05 Impact of Surface Reactions on Electrolyte Degradation for High Voltage Cathodes in Lithium-Ion BatteriesAuthor: Jessica Hüsker, Meet Batterieforschungszentrum

PD-06 Liquid phase plasma synthesis of cobalt/graphene composites as anode materials for lithium-ion batteries applicationAuthor: Sang-Chul Jung, Sunchon National University

PD-07 Effect of HF etching on electrochemical performance of Si anode for Li-ion batteriesAuthor: Arlavinda Rezqita, AIT Austrian Institute of Technology

PD-08 A novel preparation method for high energy Li-ion battery electrodes based on capillary suspensionsAuthor: Boris Bitsch, Karlsruhe Institute of Technology

PD-09 Liquid Phase Synthesis of LixMnyO4 Spinels as Cathode Material for Lithium Ion BatteriesAuthor: Shuo Yang, Institute for Inorganic Chemistry, RWTH-Aachen University

PD-10 Combined modeling and experimental characterization of titanate-based lithium-ion batteriesAuthor: Christian Kupper, Hochschule Offenburg

PD-11 Lithium-cyclo-difluoromethane-1,1-bis(sulfonyl)imide as a novel additive for high potential NCM cathodes in lithium-ion batteriesAuthor: Patrick Murmann, University of Münster, MEET

PD-12 Thermochemical Investigation of Lithium-Ion Battery Materials by Coulometric TitrationAuthor: Marco Prill, Forschungszentrum Jülich

PD-13 Silicon/LiCoO2 full cells using thin film electrodesAuthor: Antonia Reyes Jiménez, MEET Battery Research Center

PD-14 In situ Transmission Electron Microscopy Studies of Cathode Materials for Lithium Ion BatteriesAuthor: Felix Schrader, RWTH Aachen University

PD-15 Investigation of the elasticity and hardness of electrodes in lithium-ion Batteries by nanoindentation.Author: Christian Wendt, MEET Batterieforschungszentrum Münster

PD-16 Properties and advantages of multilayer electrodes for Lithium-Ion BatteriesAuthor: Bastian Westphal, Technische Universität Braunschweig

PD-17 Prediction of Operating Parameters for Long-life Use of Lithium-ion BatteriesAuthor: Thomas Waldmann, ZSW - Zentrum für Sonnenenergie- und Wasserstoff-Forschung

PD-18 Safe Discharge of Damaged Li?Ion BatteriesAuthor: Mario Wachtler, ZSW - Zentrum für Sonnenenergie- und Wasserstoff-Forschung Baden-Württemberg

PD-19 Electrochemical impedance spectroscopy as a tool to investigate the formation process of Li-Ion cellsAuthor: Christian Reinke, Technische Universität Dresden, Institut für Werkstoffwissenschaft

PD-20 Alternative solvent for lithium ion batteries based on cyano-estersAuthor: Sebastian Brox, MEET Batterieforschungszentrum

PD-21 Development of alternative binder for lithium ion batteries based on epoxide resinAuthor: Frauke Bunzel, Institut für Füge- und Schweißtechnik, TU Braunschweig

PD-22 PEDOT:PSS as a Functional Binder for cathodes in Lithium Ion BatteryAuthor: Pratik Ranjan Das, NEXT ENERGY • EWE Research Centre for Energy Technology

PD-23 Influence of water based slurry formulation on rate capability and cycle stability of LiFePO4 cathodes for lithium ion batteriesAuthor: Diana Marcela Leiva Pinzon, Fraunhofer-Institut für Keramische Technologien und Systeme IKTS

PD-24 Degradation of Li-ion Batteries in renewable Energy Storage Applications: Investigation on the SEI Chemistry of the CathodeAuthor: Natalia Schulz, Technische Universität Darmstadt

PD-25 Computational Screening of Potential Candidate Components for High Voltage ElectrolytesAuthor: Xia Cao, MEET Battery Research Center, Institute of Physical Chemistry, University of Muenster

PD-26 Temperature Influence on the Solid Electrolyte INterphase in Lithium-Ion BatteriesAuthor: Miriam Klein, Deutschen Zentrum für Luft- und Raumfahrt, Stuttgart

PD-27 Ageing investigation of lithium ion batteries with a combination of EIS and structural analysisAuthor: Delf Kober, TU Berlin

PD-28 Sulfone based electrolytes for application in high voltage lithium-ion batteriesAuthor: Peter Hilbig, Westfälische Wilhelms-Universität (MEET)

PD-29 Influence of Ageing on Relaxation Processes in Lithium-Ion BatteriesAuthor: Pablo Korth Pereira Ferraz, Technische Universität Berlin

PD-30 Development of a 3D Lithium-Ion Battery cathode model to determine tortuosity, diffusion coefficient and the Bruggeman factorAuthor: Björn Kleinsteinberg, Institut für Stromrichtertechnik und Elektrische Antriebe RWTH Aachen

PD-31 Electrode Engineering: Impact of Processing and Design towards Performance of nano-Silicon AnodesAuthor: Daniela Fenske, Fraunhofer-Institut for Manufacturing and Andvanced Materials IFAM

PD-32 Development of Tests for Lithium-Ion Cell Characterization using Realsitic Load ProfilesAuthor: Johannes Sattler, German Aerospace Center e.V. (DLR)

PD-33 Influence of aging on the safety of commercial lithium-ion 16850 batteriesAuthor: Alex Friesen, MEET Batterieforschungszentrum

PD-34 Structural properties of graphite anodes dried at different air flow conditionsAuthor: Christiane Schilcher, Institut für Partikeltechnik

PD-35 Heat capacity and thermal conductivity of electrode stacks inside the lithium-ion battery by differential scanning calorimetryAuthor: Vassilios Siozios, TA Instruments Unternehmensbereich der Waters GmbH

PD-36 In situ Raman investigations on graphite/lithium electrodesAuthor: Marian Cabañero Martínez, Fraunhofer Institute for Chemical Technology ICT

PD-37 On-Line Mass Spectrometry: New rapid analysis of Lithium-Ion Battery ElectrolytesAuthor: Hendrik Hahn, MEET Battery Research Center, Institut für Physikalische Chemie

PD-38 High voltage spinel - From materials research to complete cellsAuthor: Peter Axmann, ZSW - Zentrum für Sonnenenergie- und Wasserstoff-Forschung, Baden-Württemberg

PD-39 Development and characterization of electrolytes to enhance the intrinsic safety of lithium-ion batteriesAuthor: Tim Dagger, Batterieforschungszentrum MEET Münster

PD-40 Investigation of low temperature ageing of lithium-ion batteries with electrochemical impedance spectroscopyAuthor: Inna Kübler, Technische Universität Berlin

PD-41 Inks with high solid content - The influence of the mixing procedure on the rheological propertiesAuthor: Jörg Schuster, Technische Universität Müchen

PD-42 Additives for the Manufacturing of Electrodes and Ceramic Coated Polyolefin SeparatorsAuthor: Robin von Hagen, ALTANA AG

PD-43 Thermal analysis of aged an fresh cell components with regard to their impact on the safety properties of lithium-ion cells under thermal abuseAuthor: Debbie Berghus, University of Münster

PD-44 Mechanical properties of anode materials during electrochemical cyclingAuthor: Eike Epler, Georg-August-Universität Göttingen

PD-45 Tailor Made Microstructured Electrodes for Lithium-Ion Batteries using Block-Copolymer-TemplatesAuthor: Selina Tillmann, MEET Batterieforschungszentrum

PD-46 Thermal behavior and aging of doped NMC cathode materials for lithium-ion batteriesAuthor: Matthias Eilers-Rethwisch, MEET Battery Research Center

PD-47 Designing Graphite Electrode Structures and Properties with Particle Size Adjusted Active MaterialAuthor: Christine Nowak, Technische Universität Braunschweig

PD-49 Mechanical Properties of Electrodes for Lithium-Ion Batteries - DEM ModellingAuthor: Clara Sangrós, Technischen Universität Carolo-Wilhelmina Braunschweig

PD-50 Calendering of Graphite Anodes and NMC Cathodes for increasing energy density of Lithium-Ion BatteriesAuthor: Chris Meyer, Technische Universität Braunschweig

PD-51 Influence of Electrode Choice on the Heat Capacity and Thermal Tolerance of Lithium-Ion BatteriesAuthor: Gunther Bisle, Zentrum für Sonnenenergie- und Wasserstoff-Forschung Baden-Württemberg (ZSW)

PD-52 Mechanical properties of lithium-ion battery specific separators examined by new DMA mode of rotational Rheometers and static modulated thermal-mechanicaltechniquesAuthor: Michael Schopferer, TA Instruments, ein UB der Waters GmbH

PD-53 Improved lithium ion cells through Freudenberg Ceramic SeparatorsAuthor: Christoph Weber, Freudenberg Vliesstoffe SE & Co. KG

PD-54 Surface Coating Mediated Swelling and Fracture in Lithiated Core-Shell Silicon NanostructuresAuthor: Alexandru Vlad, Universite Catholique de Louvain

PD-55 Influence of Cycling Temperature on Specific Phase Degradation of Blended CathodesAuthor: Mariyam Susana Dewi Darma, Institute for Applied Materials - Energy Storage Systems (IAM-ESS), Karlsruhe Institute of Technology

PD-56 Li7La3Zr2O12-based all solid state thin film batteriesAuthor: Sandra Lobe, Forschungszentrum Jülich GmbH

PD-57 Modelling of Thermal Runaway of Li-Ion Batteries - A Catastrophe Theoretic ApproachAuthor: Andreas Melcher, Karlsruher Institut für Technologie

PD-58 Pore size change in commercial lithium ion battery separatorsAuthor: Roman Krafft, Universität Münster

PD-59 Ex situ and in situ Characterization of the SEI on Graphite Anodes by Raman SpectroscopyAuthor: Angelina Besganz, Fraunhofer Institute for Manufacturing Technology and Advanced Materials IFAM

PD-60 Electrochemical-calorimetric studies on different lithium-ion cellsAuthor: Boxia Lei, Karlsruhe Institute of Technology (KIT)

PD-61 Phosphate based ceramics as solid electrolyte for high temperatureAuthor: Yuantao Cui, Karlsruhe Institute of Technology

PD-62 Enhanced safety and cycle life by using reference electrodes in LIBsAuthor: Hans-Gerhard Bremes, Fraunhofer Institut für Siliziumtechnologie

PD-63 Preparation of thin LLZ-layers for all-solid-state batteries using inkjet printingAuthor: Benjamin Gotzen, Forschungszentrum Jülich

PD-64 Silicon anodes deposited on various current collectors for the development of high-density lithiAuthor: Filippos Farmakis, Democritus University of Thrace

PD-65 Synthesis and Characterization of a Porous NiSi2/Si/Carbon Composite Material as Anode for Lithium-Ion BatteriesAuthor: Haiping Jia, WWU Münster

PD-66 Analysis of the active material microstructure constituting positive electrode for lithium-ion batteries applicationAuthor: David PERALTA, Commissariat à l'énergie Atomique et aux Energies Alternatives (CEA-LITEN)

PD-67 High-Throughput & High-Output Solutions for Accelerated & Standardized Battery ResearchAuthor: Amira Abou-Hamdan, Chemspeed Technologies AG

PD-68 Tape casting of oxide-ceramic electrolyte layers for all-solid-state lithium batteriesAuthor: Thorsten Reppert, Forschungszentrum Jülich GmbH

PE Production of battery systems and cellsPE-02 An application-orientated method for characterizing the wettability of separatorsAuthor: Thomas Knoche, Technische Universität München

PE-03 High throughput production of 100% silicon anodes by thermal plasma deposition technologyAuthor: Roel Bosch, Roth & Rau B.V.

PE-04 Over discharge of lithium-ion batteries for the recycling project LithoRecIIAuthor: Daniel Hauck, TU Braunschweig

PE-05 Innovations in Joining Techniques for Battery ProductionAuthor: Michael Roscher, ThyssenKrupp System Engineering GmbH

PE-06 Inks with high solid content - The influence of the mixing procedure on the coating of electrodesAuthor: Nicolas Billot, Institut

PE-07 3D-printing in the load carrier production of traction batteries for cost determination and tool productionAuthor: Mathias Ordung, RWTH Aachen

PE-08 Battery Modules and Packs - An Approach for Integrated Product and Process DesignAuthor: Nemanja Sarovic, PEM der RWTH Aachen

PE-09 Integrated Product- and Process-Standardization in the Field of Battery Module- and Pack-ProductionAuthor: Jan-Philip Ganser, RWTH Aachen

PF Stationary battery systemsPF-01 Impact analysis of different operation strategies for batteries providing primary controlAuthor: Johannes Fleer, Forschungszentrum Jülich

PF-02 Charging Strategies for Uninterruptible Power Supply Systems with Utilization for Grid ServicesAuthor: Julia Badeda, Intistut für Stromrichtertechnik und elektrische Antriebe, RWTH Aachen University

PF-03 Cross industry collaboration the field of stationary battery systemsAuthor: Nathalie Sick, Universität Münster

PF-05 Comparison of different operation strategies for a grid-tied photovoltaic system with energy storage in combination with an electric vehicleAuthor: Carsten Brendel, Leopold KOSTAL GmbH & Co. KG

PF-06 Comparison of algorithms to predict generation and load trends of grid-connected photovoltaic systems with energy storageAuthor: Patrick Regner, Leopold KOSTAL GmbH & Co. KG

PF-07 Profitability of wind-battery systems considering battery ageingAuthor: Sabrina Ried, Karlsruhe Institute of Technology

PF-08 Physical and Electrochemical Characterization of Bottom-Up Synthesized Spherical Graphite Particles for Application in Dual-Graphite CellsAuthor: Andreas Heckmann, WWU Münster

PF-09 Ageing Test and Modeling of Lithium Iron Phosphate (LiFePO4) Batteries for Remote Solar ApplicationsAuthor: Hansley Cheetamun, Zentrum für Sonnenenergie- und Wasserstoff-Forschung Baden-Württemberg (ZSW)

PF-11 Characterization of membranes for all-vanadium redox flow batteryAuthor: Jaromír Pocedič, University of West Bohemia

PF-13 Peak Shaving on Fast Charging Stations of Electric Buses in Public TransportAuthor: Michaela Winter, RWTH Aachen

PF-14 Modularer multi Megawatt multi-technology medium voltage battery storageAuthor: Jeanette Münderlein, RWTH Aachen University

PF-15 Lab-scale evaluation of different two- and three-electrode setup cell types for lithium-ion batteriesAuthor: Ralf Wagner, University of Münster