Upload
maria-elena-guerra-g
View
61
Download
2
Embed Size (px)
Citation preview
CHAPTER 13
Chemical Kinetics
Definitions/Terminology
Kinetics is the study of rates of chemical reactions and the mechanisms (pathways) by which they occur.
3
• The rate is the increase in concentration of a product per unit time or decrease in concentration of a reactant per unit time.
• Rates have units of +/-[conc/time] (e.g., Molar/sec).
• A mechanism is the series of molecular steps by which a reaction occurs.
Reaction Rates
Thermodynamics determines whether or not a reaction can occur.
Kinetics describes how quickly a reaction occurs. Some reactions are thermodynamically favorable (G0
< 0), but are kinetically so slow as to be imperceptible at room temperature:
4
CH4(g) + O2(g) CO2(g) + H2O(g) G0 = -800 kJ/mol
H2(g) + O2(g) H2O(g) G0 = -230 kJ/mol
• These reactions do not occur at room temperature and pressure without activation (e.g., a spark or a catalyst).
Reaction Rates
5
• Rates define the velocity at which reactants disappear or products appear
• Rates have units of [concentration/time].
Reaction Rates
6
• in many reactions, the coefficients of reactants and products in the balanced equation are not all the same, for example:
H2 (g) + I2 (g) 2 HI(g)
For every 1 mole of H2 consumed, 1 mole of I2 will also be consumed, and 2 moles of HI will be produced.
The rate of disappearance of [H2] and [I2] will, therefore, be ½ the rate of appearance of [HI].
• The rate of the overall reaction is, thus, the change in the concentration of each substance multiplied by
1/[coefficient in the balanced equation]:
Reaction Rates
7
For [H2], the instantaneous rate at 50 s is:
For [HI], the instantaneous rate at 50 s is:
sM 0 .0 0 7 0 R a te
s 4 0
M 2 8.0 R a te
s
M 0 .0 0 7 0 R a te
s 4 0
M 5 6.0
2
1 R a te
Reaction Rates Mathematically, the rate of a generic reaction:
aA + bB --> cC + dD can be written as:
For X = A, B, C or D, [X] = [X]t - [X]0, where[X]t is concentration at time, t after the start of the reaction, and [X]0 is the initial concentration at the beginning of the reaction, t = 0.Minus sign indicates that the reactants concentrations decrease with time.
8
• For example, for a reaction 2A B:Rate = -(1/2)[A]/t = [B]/t
• Rates are often approximated as instantaneous rates, and the notation of calculus is used:
Rate = -1/2d[A]/dt = d[B]/dt
The rate equation
Reaction Rates The rate of a simple one-reactant, one-step reaction
is directly proportional to the concentration of the reacting substance:
Rate has units of conc/unit time (e.g., Ms-1) [A] is the concentration of A, e.g., in molarity (M). The proportionality constant, k is called the rate constant. For this simple expression, k must have units of inverse
time (e.g., s-1). Rate constants are always positive numerical quantities. 9
A B + Crate [A] or rate = k[A] the rate law expression
(different from the rate eqn!)
Reaction Rates
For the simple expression, rate = k[A]: If the initial concentration of A is doubled, the
initial rate of the reaction is doubled. If the initial concentration of A is halved, the initial
rate of reaction is cut in half. The initial rate is, thus, directly proportional to
the initial [A].
10
Reaction Rates If more than one reactant molecule appears in
the chemical equation for a one-step reaction:
2A B + C
The experimentally determined rate law is:
rate = k[A]2
11
• This relationship means that, If [A] is doubled, the rate increases by a factor of 4 (= 22).
• If initial [A] is halved, the initial rate decreases by a factor of 4 (=(1/2)2).
Reaction Rates Rate = k[X] or rate = k[X]2 are examples of a rate
law.
12
Rate laws can only be determined experimentally. The rate law cannot be determined from the balanced
chemical equation because: most chemical reactions are not one-step reactions.
Reaction Rates
The order of a reaction expresses: the dependence on the concentrations of each reactant in the
rate law (= the exponent for each concentration). the sum of the orders for each reactant.
13
• For the reaction:N2O5(g) 2NO2(g) + 1/2O2(g)
The experimentally determined rate law is: rate = k[N2O5]
• The reaction is said to be first order in N2O5 and first order overall.
Reaction Rates First order reactions are dependent on the
concentration of only a single reactant. First order reactions are common for many
chemical reactions and all simple radioactive decays.
14
Two examples of first order reactions:
2N2O5(g) 2 N2O4(g) + O2(g)
238U 234Th + 4He
Rate = k[N2O5]
Rate = k[238U]
Reaction Rates
15
• For the reaction:2NO(g) + O2(g) 2NO2(g)
• The experimentally determined rate law is:rate = k[NO]2[O2]
• This reaction is second order in NO, first order in O2 and third order overall.
Reaction Rates
16
• For the reaction:(CH3)3CBr(aq) + OH-
(aq) (CH3)3COH(aq) + Br -(aq)
The experimentally determined rate law is:rate = k[(CH3)3CBr]
• This reaction is first order in (CH3)3CBr and zero order in OH- and first order overall.
Concentrations of Reactants: The Rate-Law Expression
Example 1: The following rate data were obtained at 25oC for the reaction: 2A(g) + B(g) ® 3C(g)
What are the rate law and rate constant for this reaction?
ExperimentNumber
Initial [A](M)
Initial [B](M)
Initial rate (M/s)
1 0.10 0.10 2.0 x 10-4
2 0.20 0.10 4.0 x 10-4
3 0.10 0.20 2.0 x 10-4
22
Concentrations of Reactants: The Rate-Law Expression
23
• Compare experiments 1 and 3.• When [A] is held constant and [B] is doubled, the
rate does not change. • The reaction is zeroth order in [B].
• The rate law can be written generically as:Rate = k[A]x[B]y
• The rate law requires experimental determination of the exponents, x and y.
• Therefore, y = 0 and the rate law reduces to:Rate = k[A]x
Concentrations of Reactants: The Rate-Law Expression
24
• Next compare experiments 1 and 2. • If [A] is doubled, the rate increases by a
factor of 2.• Therefore, (2)x = 2 and x = 1.
• The rate law reduces to:rate = k[A]
• The reaction is first order in [A] and first order overall.
Concentrations of Reactants: The Rate-Law Expression
25
Concentrations of Reactants: The Rate-Law ExpressionExample 2: The following data were obtained for the
reaction:
2 A(g) + B(g) + 2 C(g) ® 3 D(g) + 2 E(g)
ExperimentInitial [A]
(M)Initial [B]
(M)Initial [C]
(M)Initial rate
(M/s)
1 0.20 0.10 0.10 2.0 x 10-4
2 0.20 0.30 0.20 6.0 x 10-4
3 0.20 0.10 0.30 2.0 x 10-4
4 0.60 0.30 0.40 1.8 x 10-3
26
From these initial rate data we can determine the rate-law expression and the rate constant for this reaction.
Concentrations of Reactants: The Rate-Law Expression
27
• Comparing experiments 1 and 3:• [A] and [B] are held constant, but [C] is
increased by 3-times. • The rate does not change.
• Therefore, the exponent, z = 0, and the rate law simplifies to:
Rate = k[A]x[B]y
Rate = k[A]x[B]y[C]z
Concentrations of Reactants: The Rate-Law Expression
28
• Comparing experiments 1 and 2:• [A] is held constant, but [B] is increased by 3-
times. • The rate also increases by 3-times.
• Therefore, y = 1, and the rate law further simplifies to:
Rate = k[A]x[B]
Concentrations of Reactants: The Rate-Law Expression
29
• Comparing experiments 2 and 4:• [B] is held constant, but [A] is increased by 3-
times. • The rate also increases by 3-times.
• The reaction is, thus, first order in A, first order in B and second order overall.
• Therefore, x = 1, and the rate law further simplifies to:
Rate = k[A][B]
Concentrations of Reactants: The Rate-Law Expression
30
Concentrations of Reactants: The Rate-Law Expression
Example 3: A reaction between compounds A and B is determined to be first order in A, first order in B, and second order overall. From the information given below, fill in the blanks.
ExperimentInitial Rate
(M/s)Initial [A]
(M)Initial [B]
(M)1 4.0 x 10-3 0.20 0.050
2 1.6 x 10-2 ? 0.050
3 3.2 x 10-2 0.40 ? 31
Rate = k[A][B]
Concentrations of Reactants: The Rate-Law Expression
32
Concentrations of Reactants: The Rate-Law Expression
33
Concentrations of Reactants: The Rate-Law Expression
34
Concentration vs. Time: Integrated Rate Laws
The integrated rate equation relates time and concentration for chemical reactions. The integrated rate equation can be used to predict the
amount of product that is produced in a given amount of time.
Provides an alternative to the initial rate method for obtaining rate constants.
Initially we will look at the integrated rate equation for first order reactions. These reactions are 1st order in one reactant and 1st order
overall. For a generic first order reaction with one reactant: A products, rate = k[A]
35
or -d[A]/dt = k[A]
Concentration vs. Time: Integrated Rate Laws
where:
t = time elapsed since beginning of reaction.
[A]0= mol/L of A at t = 0 (sometimes called initial conc., [A]i)
[A] = mol/L of A at time t ([A] sometimes written as [A]t)
k = rate constant
Take the integral of this rate law from the beginning (t = 0, [A]0) to [A] at any later reaction time, t.
The integrated rate equation for a 1st order reaction:
36
ln([A]/[A]0) = -kt,
MEMORIZE and be able to interconvert these equations!
or[A] = [A]0e-kt
ln([A]0/[A]) = kt, y = mx + bor ln[A] = -kt + ln[A]0
or ln[A]0 - ln[A] = kt,
2N2O5(g) 2 N2O4(g) + O2(g)
Concentration vs. Time: Integrated Rate Laws
37
• The reaction is found experimentally to be first order in N2O5 and first order overall.
• Rate = k[N2O5]
plots of the first order integrated rate equations for this reaction…
Concentration vs. Time: Integrated Rate Laws
38
[N2O5] = [N2O5]0e-kt
ln[N2O5] = -kt + ln[N2O5]0
Concentration vs. Time: Integrated Rate Laws
Define the half-time, t1/2, of a reaction as the time required for half of the reactant to be consumed, i.e., the time, t, at which [A]=1/2[A]0, then at t1/2, [A]0/[A] = 2.
39
ln 2 = 0.693 = kt1/2
• So, the half-time for any overall first order reaction is given by:
t1/2 = 0.693/k MEMORIZE (or take ln 2)
• The half-time is independent of [A]0!
[A]0/[A] = 2 = ekt at t = t1/2
Concentration vs. Time: Integrated Rate Laws
Example: Cyclopropane decomposes to propene according to the following equation:
The reaction is found to be first order in cyclopropane with k = 9.2 s-1 at 1000 0C. What is the half time for disappearance of cyclopropane at 1000 0C?
40
t1/2 = 0.693/9.2 s-1 = 0.075 s
Concentration vs. Time: Integrated Rate Laws
Example: Refer to the previous example. How much of a 3.0 g sample of cyclopropane remains after 0.50 seconds? The integrated rate laws can be use for any unit
that’s proportional to moles or concentration. This example uses grams rather than mol/L.
41
Concentration vs. Time: Integrated Rate Laws
42
ln [A]0 - ln [A] = kt
[A]0 = 3, t = 0.50 s, k = 9.2 s-1, solve for [A]:
ln 3 - ln [A] = 9.2 s-1(0.5 s)
1.1 - ln [A] = 4.6
ln [A] = -(4.6-1.1) = -3.5
[A] = e-3.5 = 0.03 g ~ 1% remains
Use the integrated first order rate equation:
Concentration vs. Time: Integrated Rate Laws
Example: The half-time for the first order reaction:
CS2(g) ® CS(g) + S(g)
is 688 hours at 1000 0C. Calculate the rate constant, k, at 1000 0C and the amount of a 3.0 g sample of CS2 that remains after 48 hours.
43
k = 0.693/688 hr = 0.00101 hr-1.
Concentration vs. Time: The Integrated Rate Laws
44
ln [A]0 - ln [A] = kt
ln (3.0) - ln [A] = (0.00101 hr-1)(48 hr)
1.1 - ln [A] = 0.048
ln [A] = -(0.048 - 1.1) = 1.052
[A] = e1.052 = 2.86g ~ 2.9 g or 97% unreacted
Concentration vs. Time: The Integrated Rate Laws For reactions that are second order with respect to
a single reactant, A, and second order overall, with
rate = k[A]2 = (1/a)(d[A]/dt), the integrated rate law is:
Where a = stoichiometric coefficient of A in the balanced overall equation. If A P, then a = 1. If 2A P, then a = 2
45
MEMORIZE!
• An alternative form of the 2nd order integrated rate law:
[A] = [A]0/(1 + akt[A]0).
Concentration vs. Time: Integrated Rate Laws
Half-time, t1/2, for second order reactions: Use the second order integrated rate-law as a starting
point. At the half-time, t1/2 is [A] = 1/2[A]0.
46
Concentration vs. Time: The Integrated Rate Equations
If we solve for t1/2:
So the half-time of a second order reaction depends on [A]0. Less [A]0, longer half-time Half-time increases as the reaction proceeds (unlike an
overall first order reaction, where t1/2 remains constant).
47
Concentration vs. Time: Integrated Rate Laws
Example: Acetaldehyde, CH3CHO, undergoes gas phase thermal decomposition to methane and carbon monoxide.
The rate law was found to be:
rate = k[CH3CHO]2, and k = 2.0 x 10-2 M-1hr-1 at 527 oC.
(a) What is the half-time (t1/2) for disappearance of CH3CHO if 0.10 mole is injected into a 1.0 L vessel at 527 oC? 48
Concentration vs. Time: Integrated Rate Laws
49
Concentration vs. Time: The Integrated Rate Laws
(b) How many moles of CH3CHO remain after 200 hours in the 1 L vessel?
50
Concentration vs. Time: The Integrated Rate Laws
(c) What percent of the CH3CHO remains after 200 hours in the 1 L vessel?
51
Concentration vs. Time: Integrated Rate Laws
52
(a) For the same reaction as the previous example, what is the half-time (t1/2) for disappearance of CH3CHO if 0.10 mole is injected into a 10.0 L vessel at 527 oC?
●So, if [A]0 decreases by 10-times, t1/2 must increase by 10-times,
●10 x 5.0 x 102 hr = 5.0 x 103 hr
●Note that the vessel size is increased by a factor of 10 compared to the previous example, which decreases the initial concentration by a factor of 10.
●Recall the equation for half time of this 2nd order reaction (in which the coefficient, a = 1) is:
t1/2 = 1/k[A]0)
For an overall zeroth order reaction the rate expression is:
57
Concentration vs. Time: The Integrated Rate Laws
Which gives the zeroth order integrated rate equation:
Using Integrated Rate Laws to Determine Reaction Order
58
Using Integrated Rate Laws to Determine Reaction Order
59
y = mx + b
ln [A] = -kt + ln [A]0
Plots of linear form of the integrated rate equations can determine the reaction order and rate constant.
1st order:
zeroth order: [A] = -kt + [A]0
2nd order:
Using Integrated Rate Laws to Determine Reaction Order
Example: For the thermal decomposition of ethyl bromide:
C2H5Br(g) C2H4(g) + HBr(g)
60
Time (min) 0 1 2 3 4 5
[C2H5Br] 1.00 0.82 0.67 0.55 0.45 0.37
ln [C2H5Br] 0.00 -0.20 -0.40 -0.60 -0.80 -0.99
1/[C2H5Br] 1.0 1.2 1.5 1.8 2.2 2.7
D
Using Rate Integrated Laws to Determine Reaction Order
Make an x,y plot for each of the three sets of values in the table:
1. [C2H5Br] (y-axis) vs. time (x-axis)
If the plot is linear, then the reaction is zeroth order with respect to [C2H5Br].
61
2. ln [C2H5Br] (y-axis) vs. time (x-axis) If the plot is linear, then the reaction is first order
with respect to [C2H5Br].
3. 1/ [C2H5Br] (y-axis) vs. time (x-axis) If the plot is linear, then the reaction is second
order with respect to [C2H5Br].
Using Integrated Rate Laws to Determine Reaction Order Plot of [C2H5Br] versus time.
62Is it linear?
[C2H5Br]
Using Rate Laws to Determine Reaction Order
Plot of ln [C2H5Br] versus time.
Is it linear?
ln [C2H5Br]
Using Integrated Rate Laws to Determine Reaction Order
Plot of 1/[C2H5Br] versus time.
64Is it linear?
1/[C2H5Br]
Using Integrated Rate Laws to Determine Reaction Order ln[C2H5Br] vs. time is the only linear plot. The reaction is, therefore, first order with respect to
[C2H5Br] and first order overall. From the integrated rate law for a first order reaction:
ln[A] = -kt + ln[A]0, slope = -k.
66
●Slope = y2 - y1/x2 - x1.
• So k = 0.2 min-1
Using Rate Equations to Determine Reaction Order
Example: Concentration-versus-time data for the reaction:
2NO2(g) --> 2NO(g) + O2(g),
are given in the table below. Plot each of these time functions to determine the rate of the reaction and the value of the rate constant.
67
Time(min) 0 1 2 3 4 5[NO2] 1.0 0.53 0.36 0.27 0.22 0.18
ln [NO2] 0.0 -0.63 -1.0 -1.3 -1.5 -1.7
1/[NO2] 1.0 1.9 2.8 3.7 4.6 5.5
Using Rate Equations to Determine Reaction Order
Plot of [NO2] versus time.
69Is it linear?
[NO2]
Using Rate Equations to Determine Reaction Order Plot of ln [NO2] versus time.
70
Is it linear?
ln [NO2]
Using Rate Equations to Determine Reaction Order
Plot of 1/[NO2] versus time.
71Is it linear?
1/[NO2]
Using Rate Equations to Determine Reaction Order
1/[NO2] vs. time is the only linear plot. The reaction is, therefore, second order in
[NO2] and second order overall.
72
●Determine the value of the rate constant from the slope of the line.
Using Rate Equations to Determine Reaction Order
From the equation for a second order reaction the slope = a k In this reaction a = 2.
73
Slope = 0.90 = 2 k
k = 0.45 M-1min-1
Collision Theory of Reaction Rates
Three basic events must occur for a bimolecular reaction to occur.
The atoms, molecules or ions must:1. Collide.
2. Collide with enough energy to break and form bonds.
3. Collide with the proper orientation for a reaction to occur.
79
Collision Theory of Reaction Rates
For a simple second order reaction between two different gaseous atoms, A and B:
80
A B
A B
A B BA B
A BA BA B
4 different possible A-B collisions
6 different possible A-B collisions
9 different possible A-B collisions
A(g) + B(g) products, where rate = k[A][B]
Increasing the number of atoms per unit volume (equivalent to increasing their concentrations) increases the probability of A/B collisions per unit time and, thereby increases the reaction rate.
Collision Theory of Reaction Rates
An example of an effective collision is:
81
X Y
X Y
X Y
X Y
X Y +
X Y
Colliding molecules (i.e., individual reactants that contain more than one atom) must be oriented properly for reaction.
X2(g) + Y2(g) 2 XY(g)
Collision Theory of Reaction Rates
82
X
X
Y YY
Y
X X X X Y Y
Some possible ineffective collisions are :
Collision Theory of Reaction Rates Effective and ineffective molecular collisions for:
NO + N2O --> NO2 + N2
83
Effective
reactants collision
products
Ineffective (wrong orientation)
reactants collisionreactants
(blue spheres = N, red spheres = O)
Reaction Mechanisms and the Rate-Law Expression Many chemical reactions occur by more than one step. The sequence of individual chemical steps by which the
reaction occurs is called the reaction mechanism. Each step consists of either a unimolecular or bimolecular
chemical reaction. The sum of the individual steps must equal that of the overall
balanced reaction. Rate laws can be used to propose reaction mechanisms.
84
Reaction Mechanisms and the Rate-Law Expression The slowest step (the “bottleneck”) in a reaction mechanism
is the rate-determining step (r.d.s.) (sometimes called the rate-limiting step).
85
Rules for a mechanism to be consistent with the experimentally determined rate law.
Reaction orders indicate the number of molecules involved in: The r.d.s. only
or The r.d.s. and any steps preceding the r.d.s.
Any step after the r.d.s. cannot be part of the rate law. Sum of the steps in the mechanism must equal the
balanced equation for the overall reaction. Intermediates in a mechanism cannot appear in the rate
law.
Reaction Mechanisms and the Rate-Law Expression
Use the experimental rate law to postulate a mechanism.
Consider the iodide ion-catalyzed decomposition of hydrogen peroxide to water and oxygen.
86
2H2O2(aq) ---> 2H2O(l) + O2(g)
I-
Reaction Mechanisms and the Rate-Law Expression
This reaction has been experimentally determined to be first order in H2O2, first order in I- , and second order overall, i.e. Rate = k[H2O2][I-]
87
Step 1, slow: H2O2 + I- --> IO- +H2O
Step 2, fast: IO- + H2O2 --> H2O + O2 + I-
Overall reaction: 2H2O2 --> 2H2O + O2
A mechanism consistent with this rate law is:
Reaction Mechanisms and the Rate-Law Expression
According to this mechanism: One hydrogen peroxide molecule and one iodide
ion react in the slow step (the r.d.s.).
88
The iodide ion functions as a catalyst: it is consumed in step 1 and regenerated in step 2.
Hypoiodite (IO-) should not accumulate appreciably because it is produced in the r.d.s., then rapidly consumed in the subsequent fast reaction with hydrogen peroxide. (IO- has been detected in very small amounts as a
short-lived reaction intermediate).
Reaction Mechanisms and the Rate-Law Expression
Ozone, O3, reacts very rapidly with nitric oxide, NO, in a reaction that is first order in each reactant and second order overall.
89
Reaction Mechanisms and the Rate-Law Expression One possible mechanism that is consistent with the
rate law is:
90
k1
k2
Rate = k1[O3][NO]
• k2 >> k1, so the slow step is the “bottleneck” which limits the overall reaction rate
• k1 = k, i.e., the rate constant for the overall reaction
Reaction Mechanisms and the Rate-Law Expression
A mechanism that is inconsistent with the rate-law is:
91
• Experimentally determined rate laws can, thus, DISPROVE, but cannot, by themselves, PROVE a particular mechanism
Reaction Mechanisms and the Rate-Law Expression
92
• Consider the reaction:
2NO(g) + Br2(g) 2NOBr(g)
• The experimentally determined rate law is:
Rate = k[NO]2[Br2]• One possible mechanism consistent with the rate law is a simultaneous collision and reaction of two NO molecules and one Br2 molecule. However, simultaneous three-body collisions are highly improbable.
• More likely mechanisms would consist of a sequence of bimolecular steps.
Reaction Mechanisms and the Rate-Law Expression
93
NO + Br2 NOBr2 fast pre-equilibrium
NOBr2 + NO ---> 2NOBr2NO + Br2 --> 2NOBr overall reaction
• According to this mechanism, the rate law for the slow step is:
Rate = k2[NOBr2][NO]
How to reconcile with the experimental rate law, rate = k[NO]2[Br2]?• For the fast pre-equilibrium, the rates of the forward and reverse reactions must be equal: k1[NO][Br2] = k-1[NOBr2].
• Rearrange to [NOBr2] = k1/k-1[NO][Br2], substitute into the rate law for the r.d.s.:
• Rate = k2(k1/k-1[NO][Br2])[NO] = k[NO]2[Br2], where k = k2k1/k-1
k2
k-1
k1
slow
Transition State Theory
Transition state theory postulates that the reactants form a high energy intermediate, the transition state, which then rearranges into the lower energy products.
For a reaction to occur, the reactants must acquire sufficient energy to form the transition state. This energy is called the activation energy, Ea.
94
Transition State Theory
95
Energy changes during a chemical reaction.
Ea = activation energy
transition state
ΔE ~ ΔH
2H2(g) + O2(g) 2H2O(g)
Transition State Theory
96
97
Transition State TheoryNO2(g) + CO(g) NO(g) + CO2(g)
experimental rate law: Rate = k[NO2]2
• Step 1) is the r.d.s (k1 << k2).
• Step 1) is slower than step 2) because Ea1 > Ea2.
• The rate law of step 1) is the same as the rate law of the overall reaction.
A mechanism consistent with the rate law:
step 1: NO2(g) + NO2(g) NO3(g) + NO(g) Rate1 = k1[NO2]2 slow
step 2: NO3(g) + CO(g) NO2(g) + CO2(g) Rate2 = k2[NO3][CO] fast
Transition State Theory The relationship between the activation energy
for forward and reverse reactions is: Forward reaction activation energy = Ea
Reverse reaction activation energy = Ea + DE
difference = DE (~DHrxn, a thermodynamic quantity)
Higher Ea, slower reaction, lower rate constant, k. In order for a reaction to reach the transition state and
convert to products, the combined kinetic energy of the colliding molecules must be ≥ Ea.
One way to increase kinetic energy of molecules is to raise the temperature.
Therefore, the rates of most chemical reaction increase with increasing temperature.
98
Temperature Effects: Transition State Theory
Molecular kinetic energies increase as the temperature is increased.
99
Temperature Effects: Transition State Theory One method to increase the energy necessary to
break and reform bonds is to heat the molecules. Recall the reaction of methane with molecular
oxygen is exothermic (DH0 < 0) but slow at 25 0C:
102
The reaction can be started with a spark or match. This provides the initial activation energy necessary to break
the first few bonds. Afterwards the reaction is self-sustaining, i.e., heat
generated by reaction of the first few molecules provides the activation energy to break bonds in other molecules.
CH4(g) + O2(g) CO2(g) + H2O(g) H0 = -880 kJ/mol
Temperature Effects: The Arrhenius Equation
103
MEMORIZE and be able to use the Arrhenius equation!
• k is the rate constant
• T is the absolute temperature
• Ea is the activation energy
• R is the gas constant (8.314 J/mol∙K)
• A is the “pre-exponential factor” or “frequency factor” • The number of approaches to the activation barrier per unit time.
• e(-Ea/RT) is the “exponential factor” • the fraction of molecules that convert to product after approaching
the activation barrier.
or
104
Temp, K k, M-1∙s-1 Temp, K k, M-1∙s-1
600 3.37 x 103 1300 7.83 x 107
700 4.83 x 104 1400 1.45 x 108
800 3.58 x 105 1500 2.46 x 108
900 1.70 x 106 1600 3.93 x 108
1000 5.90 x 106 1700 5.93 x 108
1100 1.63 x 107 1800 8.55 x 108
1200 3.81 x 107 1900 1.19 x 109
Temperature Effects: The Arrhenius Equation
Example: Determine the activation energy and frequency factor for the reaction O3(g) O2(g) + O(g) given the following data:
105
Plot these data as lnk vs I/T:
Temperature Effects: The Arrhenius Equation
106
Ea = m(-R)
solve for Ea
A = ey-intercept
solve for A 11-11
118.26
sM 1036.4
1036.4
A
eA
Temperature Effects: The Arrhenius Equation
y = mx + b, where m = -(Ea/R) and b = ln(A)
Temperature Effects: The Arrhenius Equation
If the Arrhenius equation is written for two temperatures, T2 and T1 with T2 > T1.
107
2
a2
1
a1
-Aln ln
and
-Aln ln
RT
Ek
RT
Ek
Temperature Effects: The Arrhenius EquationSubtract one equation from the other:
108
Temperature Effects: The Arrhenius Equation Consider the rate of a reaction for which Ea = 50
kJ/mol, at 20 oC (293 K) and at 30 oC (303 K). How much do the two rates differ?
109
Temperature Effects: The Arrhenius Equation Many reactions have Ea »50 kJ/mol.
For these reactions the rate approximately doubles for every 10 0C rise in temperature (near room temperature).
This is a good “rule of thumb” for dependence of reaction rates (strictly speaking, rate constants) on temperature.
110
Catalysts
Catalysts increase reaction rates by providing an alternative reaction pathway with a lower activation energy.
There is no net consumption of the catalyst during the reaction it catalyzes.
112
Catalysts
Homogeneous catalysts exist in same phase as the reactants.
Heterogeneous catalysts exist in different phases than the reactants. Solid catalysts often catalyze solution reactions.
113
2H2O2 --> O2(g) + 2H2OMnO2
Catalysts
Examples of commercial catalyst systems include:
114
Catalysts
This movie shows catalytic converter chemistry on the molecular scale
115
Catalysts
116
Catalytic converters also catalyze oxidation of CO to CO2
Overall reaction
2 CO(g)+ O2(g) ® 2CO2(g)
Adsorption
CO(g) ® CO(surface)
O2(g) ® O2(surface)
Activation
O2(surface) ® 2 O(surface)
Reaction
CO(surface) +O(surface) ® CO2(surface) Desorption
CO2(surface) ® CO2(g)
Catalysts The Haber process is used industrially for “fixing” nitrogen
by producing ammonia, NH3, from N2 and H2:
117
N2(g) + 3H2(g) --------> 2NH3(g)
Fe,Fe2O3
• A good illustration of the interplay between kinetics and thermodynamics.
• This reaction is actually an equilibrium that lies far towards the right at 25 0C and is also exothermic.
N2(g) + 3H2(g) 2NH3(g) Kc = 108 at 25 0C, H = -92 kJ/mol
• However, the rate of this reaction is negligible at 25 0C.• The reaction is carried out at 500 0C with catalyst to increase the rate.
• But high temperature favors the reverse reaction (because it’s exothermic), so high pressure (200-1000 atm) is used to shift the equilibrium to the right (fewer moles of gaseous product than reactants).
The Haber Process: Balancing Factors that Affect Equilibria
118
Enzymes
119
Catalase: 2H2O2 O2(g) + 2H2O
Enzymes are biological catalysts (usually proteins) that: increase reaction rates provide specificity, optimized to bind only particular
substrates and convert them to single sets of products.
After studying Tro Chapter 13 text and lecture and working the problems, you should be able to:
123
1. Determine reaction orders, rate laws, and values of rate constants given a set of initial rates and initial concentrations.
2. Identify overall orders of reactions and order in each reactant given a rate law.
3. Know units for zeroth, 1st and 2nd order rate constants.4. Write the rate laws for simple overall zeroth, 1st and 2nd order
reactions.5. Write and use the integrated rate equations for zeroth, 1st and 2nd
order rate laws with one reactant.6. Describe how concentrations change with time or how the rate will
change for a given concentration change for each of the rate laws in #3.
7. Use these rate laws to determine: half-times, concentrations remaining after a given reaction time or from a given starting concentration and rate constants.
8. Identify or draw and describe equations for linear plots of zeroth, 1st and 2nd order reactions.
9. Determine order of reaction given plots in #8.
After studying Tro Chapter 13 text and lecture and working the problems, you should be able to:10. Write reasonable mechanisms given rate laws and vice versa. 11. Define the rate-determining step of a reaction mechanism.12. Effects of collisions and molecular orientations on reactions.13. Diffusion-controlled reactions are limited only by collision rates.14. Define activation energy draw reaction progress diagrams and
label activation energy, transition state and DHrxn.15. Qualitatively describe temperature dependence of reactions in
terms of molecular kinetic energies. 16. Qualitatively draw and/or interpret Maxwell-Boltzmann distributions
of molecular kinetic energies and label areas equal to and exceeding activation energy.
17. Memorize and use Arrhenius equation(s) to calculate temperature dependence of reaction rates and activation energies.
18. Define catalyst and its effect on activation energy and reaction rate.19. Not responsible for enzyme catalysis or chain reactions.
124
Mid-term Exam 4
125
Chapter 18 (Electrochemistry) including:
1. Use the Nernst equation (memorize) to calculate Ecell under non-standard conditions given half-reaction E0 values, initial concentrations and the Nernst equation.
2. Calculate values of K and Grxn from E0cell using the Nernst equation and
G = -nFEcell (memorize).
3. Describe and calculate Eo for a concentration cell.
4. Identify components in an alkaline dry cell given the half reactions and a diagram of the cell. Show direction of current flow, and explain why voltage stays fairly constant during discharge.
5. Draw a diagram of a lead acid car battery given the half reactions, and describe the discharge and recharge cycles.
6. Describe and draw a diagram of a H2/O2 fuel cell.
7. Given E0’ values (pH 7), describe and calculate how energy can be derived from biological redox reactions.
All of Chapter 13 (kinetics)